Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 453

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	caadria2010_048
id	caadria2010_048
authors	Gu, Ning; Vishal Singh and Xiangyu Wang
year	2010
title	Applying augmented reality for data interaction and collaboration in BIM
doi	https://doi.org/10.52842/conf.caadria.2010.511
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 511-520
summary	Building Information Modelling (BIM) is expected to enable efficient collaboration, improved data integrity, distributed and flexible data sharing, intelligent documentation, and high-quality outcome, through enhanced performance analysis, and expedited multi-disciplinary planning and coordination. Despite these apparent benefits, the collaboration across the architecture, engineering and construction (AEC) disciplines is largely based on the exchange of 2D drawings. This paper reports the findings from a research project that aims at developing measures to enhance BIM-based collaboration in the AEC industry. Based on focus group interviews with industry participants and case studies of BIM applications, visualisation was identified as an interactive platform across the design and non-design disciplines. It is argued that visualisation can enhance the motivation for BIM-based collaboration through integration of advanced visualisation techniques such as virtual reality (VR) and augmented reality (AR). An AR interface for a BIM server is also presented and discussed in the paper. AR can open up potential opportunities for exploring alternatives to data representation, organisation and interaction, supporting seamless collaboration in BIM.
keywords	BIM; augmented reality; design collaboration
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2010_013
id	caadria2010_013
authors	Hewett, B. and A. Burke
year	2010
title	Open tower: developing design research practice
doi	https://doi.org/10.52842/conf.caadria.2010.137
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 137-146
summary	This paper critically reflects on computational methods of design in relation to social and environmental sustainability design research within contemporary and future tall building typology. It develops the author’s experience in large-scale building design practice into academic design research. The analysis of tall building typology is presented initially in the context of practice, followed by its development in an architectural master’s studio. The authors discuss their design research within a practice context that determined the question: what opportunities do computational processes offer to the conception of the tall building typology? Its transference to an educational research context allowed for the deeper exploration and development of a position on algorithmic and parametric methods, their relevance to the typology of the contemporary tall building and complex architectural scenarios.
keywords	Computational; tower; practice; research; typology; teaching
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia11_372
id	acadia11_372
authors	James, Anne; Nagasaka, Dai
year	2011
title	Integrative Design Strategies for Multimedia in Architecture
doi	https://doi.org/10.52842/conf.acadia.2011.372
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 372-379
summary	Multidisciplinary efforts that have shaped the current integration of multimedia into architectural spaces have primarily been conducted by collaborative efforts among art, engineering, interaction design, informatics and software programming. These collaborations have focused on the complexities of designing for applications of multimedia in specific real world contexts. Outside a small but growing number of researchers and practitioners, architects have been largely absent from these efforts. This has resulted in projects that deal primarily with developing technologies augmenting existing architectural environments. (Greenfield and Shepard 2007)This paper examines the potential of multimedia and architecture integration to create new possibilities for architectural space. Established practices of constructing architecture suggest creating space by conventional architectural means. On the other hand, multimedia influences and their effect on the tectonics, topos and typos (Frampton 2001) of an architectural space (‘multimedia effects matrix’) suggest new modes of shaping space. It is proposed that correlations exist between those two that could inform unified design strategies. Case study analyses were conducted examining five works of interactive spaces and multimedia installation artworks, selected from an initial larger study of 25 works. Each case study investigated the means of shaping space employed, according to both conventional architectural practices and the principles of multimedia influence (in reference to the ‘multimedia effects matrix’) (James and Nagasaka 2010, 278-285). Findings from the case studies suggest strong correlations between the two approaches to spatial construction. To indicate these correlations, this paper presents five speculative integrative design strategies derived from the case studies, intended to inform future architectural design practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	caadria2010_009
id	caadria2010_009
authors	Rahaman, Hafizur and Beng-Kiang Tan
year	2010
title	Interpreting digital heritage: considering the end-user’s perspective
doi	https://doi.org/10.52842/conf.caadria.2010.093
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 93-102
summary	Present virtual heritage projects are mostly focused either on ‘process’ or ‘product’ but rarely consider ‘user’ (end user’s perception of the content) with project contents predominantly developed with an ‘ocular-centric’ tendency. There is no significant interpretation method or principles for interpreting digital heritage unlike other disciplines such as archaeology. This paper argues that, for better interpretation and experience of a digital heritage site, a comprehensive interpretation method is required, which should address multicultural background of end-users and overcome the linearity and subjectiveness in content creation. This paper also argues that instead of pre-determined instructional sequences or descriptive interpretation, the interaction setting can be participatory and contributive, where the visitor and environment may interplay mutually with each other. As a methodology, ‘Interpretation’ is first conceptualized by assimilating definitions from heritage scholars and organizations. Notions of interpretation-practice and level of interaction were identified from reviewing some online digital heritage projects. By identifying weaknesses, this paper finally proposes a few suggestions for overcoming and possibly developing a comprehensive interpretation method for future digital heritage projects.
keywords	Heritage interpretation; end user; digital heritage
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	acadia10_327
id	acadia10_327
authors	Vassigh, Shahin; Herrera, Silvana
year	2010
title	Interactive Teaching through Simulation Environments
doi	https://doi.org/10.52842/conf.acadia.2010.327
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 327-332
summary	Spurring new and innovative building design will be critical to the urban energy and economic future of the nation. The operation of completed buildings account for 48% of the nation’s annual greenhouse gas emissions, and 76% of all electricity generated by U.S. power plants goes to supply the building sector. Therefore developing and applying new and innovative sustainable building design will have a measurable impact on the environment. Recent studies show sustainable building design is closely linked to system integration, where various components of a building work in confluence to produce synergetic benefits. As a result, a critical component of sustainable design involves a clear understanding of building systems operation, interaction, and the selection parameters. A consideration of suitable building systems, gauging their interaction, and proposing well integrated systems can lead to producing efficient models of sustainable buildings with minimal impact on the environment. The following paper outlines the progress on a project entitled “Building Literacy: the Integration of Building Technology and Design in Architectural Education.” The project develops a digital tool for teaching/learning architectural technology from an integrated systems perspective. The project attempts to immerse students in a simulated environment that is based on the real life practice of architecture. The project accomplishes this by harnessing the capabilities of simulation and dynamic modeling programs, as well as the state of art graphic media, to create compelling and rewarding reasons for students’ engagement in the lear ning process. The project involves a multidisciplinary team of faculty from Florida International University, University at Buffalo the State University of New York, and Iowa State University and is funded by the US Department of Education for the period of 2007-2011.
keywords	educational software, interactive learning, interactive teaching, simulation programs, building performance, building integrated systems,
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	sigradi2010_298
id	sigradi2010_298
authors	Barcellos, Góes Mariza; David Maria Manuela
year	2010
title	Visualization: The Contribution of a Mathematical Mediating Artefact for Creative Processes and Design Activities
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 298-300
summary	Considering mathematical knowledge as an artefact that mediates social activities in the world, this paper emphasizes the contribution of visual thinking to mathematics education and extends it to the learning of design activities, especially in architectural contexts. Results from a previous research paper on architectural design, which focused on the work of some contemporary architects in their day - to - day office activities, showed the relevance of drawing in architectural practice. These results aroused our interest in researching the mediating role of drawing and its structuring effects on creative processes and design activities in architecture.
keywords	visualization, mathematics education, architectural design education, activity theory
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2010_056
id	caadria2010_056
authors	Fischer, T.
year	2010
title	The interdependence of linear and circular causality in CAAD research: a unified model
doi	https://doi.org/10.52842/conf.caadria.2010.609
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 609-618
summary	This paper discusses the relationship between linear and circular conceptions of causality and questions the common mutually-exclusive bivalent logic applied in distinguishing them. It argues that (circular) conversation and (linear) control both have their place in the design process. This calls for open minds and a reconsideration of value systems in CAAD practice and research, without which CAAD remains the futile attempt to deploy techniques developed to identify and enforce linear causation for the benefit of a practice that depends upon circular causality.
keywords	Control; technique; novelty; predictability; surprise
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac20108105
id	ijac20108105
authors	Grobman, Yasha Jacob; Abraham Yezioro; Isaac Guedi Capeluto
year	2010
title	Non-Linear Architectural Design Process
source	International Journal of Architectural Computing vol. 8 - no. 1, 41-54
summary	The introduction of the computer to the architectural design process have facilitated the possibility to examine a large number of design alternatives by allowing continuous variation between pre defined constraints. However, for the most part, evaluation and comparison of the alternatives is still handled manually in a linear fashion by the designer. This paper introduces a different approach to the architectural design process, which calls for a multithreaded or a non-linear design process. In a non-linear design process design directions and alternatives are generated, presented and evaluated simultaneously, and in real time. As an example for a non-linear design process the Generative Performance Oriented Design model and software tool (GenPOD) are presented and discussed. Moving towards non-linear modes of design arguably increases design creativity by allowing generating and evaluating a greater number and variation of design alternatives.
series	journal
last changed	2019/05/24 09:55

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2010_091
id	ecaade2010_091
authors	Ibrahim, Mohamed S.; Bridges, Alan; Chase, Scott C.; Bayoumi, Samir; Taha, Dina S.
year	2010
title	Use of Grammar for Shape Exploration with Novice Students: Experiment 1: against the first impressions
doi	https://doi.org/10.52842/conf.ecaade.2010.115
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.115-124
summary	This paper describes a teaching experience conducted and carried out as part of the architectural coursework of the first year students. The workshop is the first of three planned to take place during the course of the first year studio. It aims at introducing new ways of thinking as well as introducing students to the new pattern of architectural education; It also helps communicating and-if required- unlearning accumulative conceptions that were unconsciously gained by the lack of practice, ignorance of actuality or simply by the accumulation of images and ideas in their minds over the years. A grammatical approach was chosen to develop the described methodology, based on the shape grammars system in general, and on one of its basic skills of seeing/understanding shapes & extracting elements of the visual composition in particular
wos	WOS:000340629400012
keywords	Beginning/novice students; Shape grammar; Pedagogical grammar; Design education.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2010_179
id	ascaad2010_179
authors	Jones, Charles; Kevin Sweet
year	2010
title	Over Constrained
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 179-188
summary	Parametric software has fundamentally changed the way in which architecture is conceptualized, developed and even constructed. The ability to assign parameters or numeric variables to specific portions of a project has allowed designers the potential to test variations of their design. Small changes to a single parameter can have an exponential effect on the designed object and alter its appearance beyond original preconceptions in both positive and negative ways. Parametric software also has the ability to constrain or restrict geometry to set values, parameters or conditions. This has the benefit of allowing portions of a form to remain constant or unchanged while simultaneously allowing for a great degree of flexibility in response to a design intent. Constraining portions of a design allows architects to respond to existing or unalterable conditions by ""locking down"" information within a project and then explore those portions that can change more freely. This programmed relationship between the parameter and the form, once established, can give the illusion of minimal effort for maximum output. The ease in which geometrical form can be altered and shaped by a single variable can mislead beginning designers into thinking that the software makes these relationships for them. What is hidden, is the programming or connections needed between the parameters and the geometry in order to produce such dramatic change. Finally, thinking parametrically about design reintroduces the concept of a rigorous, intent driven, fabrication oriented practice; a practice lost in a digital era where the novelty of new tools was sufficient to produce new form. Because parametric models must have established relationships to all parts of the design, each component must have a purpose, be well thought out, and have a direct relationship to a real world object. The introduction of parametric design methodologies into an architectural pedagogy reestablishes architectural praxis in an academic setting. Students are taught to design based on creating relationships to connected components; just as they would do in a professional architectural practice. This paper outlines how Digital Project – a parametric based software – was introduced into an academic setting in an attempt reconnect the ideologies of academia with the practicalities of professional practice. In order to take full advantage of Digital Project as a parameter based software, a project that creates modular, flexible geometries was devised. Produced over one semester, the project set out to find ways of controlling designed geometry through variable parameters that allowed the initial module to be instantiated or replicated into a wall condition: maintaining a unified whole of discrete components. This paper outlines this process, the results and how the outcomes demonstrates the parametric ideologies described above.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_135
id	ascaad2010_135
authors	Lostritto, Carl
year	2010
title	Computation Without Computers
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 135-144
summary	This work documents the implications of using physical media to teach digital design concepts, techniques, values and approaches. With the pedagogy and work of a seminar and studio across two Universities as test cases, this research seeks to prove that a parametric and algorithmic approach to architecture is most fruitfully understood as the connection between logic, mathematics and aesthetics. Students trace the indirect relationships between process and product so as to enable the application of these connections in a non-linear, exploratory and goal-flexible design process. The first phase of student work involves the creation of an image, constructed with ink or graphite on paper, that embodies a parametric aesthetic. Students are tasked articulating and performing operations, such as dividing a curve, packing shapes, and conditional transformations. Subsequently, students fabricate a surface-conscious model with modules that have the capacity to vary based on their grid parameter, using historically rooted techniques such as weaving, perforating, layering and tessellation. Digital fabrication and parametric modeling is then introduced, not as a means to a predefined end, but as another medium, capable of participating with manual techniques. As an example, a fabricated paper-based installation is generated with parametrically generating a cut-sheet, partially blind to its assembled manifestation. The hypothesis of this research is tested in more comprehensive projects that follow as environmental forces are resolved through dynamic and ambiguous visual and spatial conditions.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_139
id	acadia10_139
authors	Miller, Nathan
year	2010
title	[make]SHIFT: Information Exchange and Collaborative Design Workflows
doi	https://doi.org/10.52842/conf.acadia.2010.139
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 139-144
summary	This paper explores design processes requiring the invention and implementation of customized workflows for the optimization of design information exchange. Standard workflows in design software are typically dependent upon the use of proprietary file formats to communicate design intent across the design team. Software platforms promote “one-stop-shop” proprietary approaches to BIM where all team members and consultants ideally operate within a single model environment and store information within a single file format. While the ‘single model’ approach can be effective under some circumstances, this approach is often found to be limiting when the design process calls for the integration of other design toolsets and delivery processes. This is especially true for large complex projects where multiple participants with different software requirements need to collaborate on the same design. In these cases, various non-standard ways of working are often implemented, resulting in a new means of communicating design and building information across a team. This paper will outline the impact customized workflows have on the design process at NBBJ and evaluate their potential for leading to more innovative design and integrated teams. The first study will explore and evaluate the communication and collaborative process that took place in the design development and construction documentation stages of the Hangzhou Stadium. The second study will be an overview of ongoing investigation and experimentation into customized workflows for team and data integration.
keywords	team integration, international practice, parametric methods
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	caadria2015_203
id	caadria2015_203
authors	Nakapan, Walaiporn
year	2015
title	Challenge of Teaching BIM in the First Year of University
doi	https://doi.org/10.52842/conf.caadria.2015.509
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 509-518
summary	This paper presents an experience about BIM curriculum from Faculty of Architecture, Rangsit University, which has been implemented since 2010. Our approach is to introduce BIM into the first year architectural design curriculum both as a tool and as a new way to practice design. The objective of this paper is to identify problems encountered from the class and typical misconceptions about BIM curriculum based on our experience. Problems encountered are 1) The need to boost students’ attention, 2) The lack of acceptability criteria of the students’ design flaws, 3) The lack of BIM Guideline to be used in the curriculum, and 4) The need to grow the BIM thinking in other advanced studios. Typical misconceptions identified are 1) BIM is just another design tool 2) Traditional design process can be used in a BIM design studio, and 3) BIM limits creativity. Finally, we propose how to improve the curriculum and compare the BIM design process to traditional design process.
keywords	BIM; Curriculum; Education.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2011_091
id	sigradi2011_091
authors	Rodriguez Barros, Diana
year	2011
title	Diseño de Productos y Modelado 3D Hiperrealistico. Un caso de enseñanza y práctica proyectual en entornos digitales [Product design and hyper realistic 3D model. A case of teaching and design practice in digital environments]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 411-414
summary	We present a teaching experience carried out during the second quarter of 2010 in the Industrial Informatics 2 course of FAUD UNMdP Industrial Design Product oriented career, about three-dimensional and communication module. We tackle this practice, developed in the digital workshop environment, from the perspective of Design Thinking through an approach to the multidimensional implicit in the design process. The experience walked through the initial product selection and recognition of coding guidelines for design; redesign, 3D modeling and product prototyping; and result communicating. We consider have obtained multiple and original results to tackle, complement and resolve the design in virtual environments from the individual interests of students.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	lasg_hylozoicground_2010_fulltext
id	lasg_hylozoicground_2010_fulltext
year	2010
title	Hylozoic Ground; Liminal Responsive Architecture
source	Hylozoic Ground; Liminal Responsive Architecture [ISBN 978-1-926724-02-7] Riverside Architectural Press: Toronto, Canada 2010.
summary	Introductory summary of developing Hylozoic Series, a collection of life-like architectural structures
keywords	Hylozoism, Hylozoic series, components, assemblies, design process
last changed	2019/07/29 14:00

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia10_263
id	acadia10_263
authors	Beaman, Michael Leighton; Bader, Stefan
year	2010
title	Responsive Shading \| Intelligent Façade Systems
doi	https://doi.org/10.52842/conf.acadia.2010.263
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 263-270
summary	As issues of sustainability gain traction for architects, methodologies for designing, analyzing, and calibrating design solutions have emerged as essential areas of research and development. A number of approaches have been pursued with regard to embedding data into the design process, most fall into one of two approaches to research. The first approach is to mediate environmental impact at the level of applied technology; the second alters building methods and material construction, generating efficient energy use. However, few approaches deal with the crafting of relationships between information and performance on an architectural level. We will examine an approach focused on understanding how crafting relationships between information and design can move architecture towards achieving sustainability. In developing this approach, we created a data-driven design methodology spanning from design inception to construction. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. By contextualizing the solutions generated, we were able design though a set of specific and controlled responses rather than as a singular solution. Information utilization requires a new kind of craft that moves beyond instances into relationships and offers performance sensitive issues in design a focused trajectory. We applied this method to the research and development of a responsive shading structure built in conjunction with a thermal testing lab for two test locations – Austin, Texas (Figure. 1 and 2) and Munich, Germany. The following paper chronicles the design and construction at the Texas site over an academic semester.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: