Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 451

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_231
id	ascaad2010_231
authors	Turrin, M.; R. Stouffs and S. Sariyildiz
year	2010
title	Parametric Design of the Vela Roof
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 231-240
summary	Due to the increased request for representative structures and for spaces to be used independent of the weather conditions, contemporary cities increasingly integrate public covered spaces (shadowed squares and streets, courtyards, historic commercial galleries, etc.) in the urban fibre. Facing the design of large roof structures for semi outdoor spaces is increasingly common for architects and engineers. When focusing on large roofs, aesthetics, structural performance and economics often dominate the design process. However, the current increased emphasis on energy-related aspects generates new challenges. Particularly, the use of renewable energy resources needs to be confronted. In this paper we will address the subject through a case study whose design aimed at integrating performance evaluations in the very early stages of the process. The case study focuses on the so-called “Vela roof”. This roof is part of a larger project currently under construction in Bologna (Italy). The focus of the study concerns the use of on-site renewable climate (energy) resources with special attention given passive reduction of summer overheating and daylight. For these tasks a parametric model was developed to support the decision making process and the paper will present its potential with respect to performance-oriented design during the conceptual design phase of roof structure. The very first conceptual design developed by the architectural office was assumed as a starting point for the inclusion of performance criteria. In the preliminary design of the roof uncomfortable conditions were expected under the whole roof in the summer. Various strategies for improving the thermal comfort were investigated, involving a large set of combined systems. Not all of these will be detailed in this paper. Instead we will focus on the ones directly affected by the geometry of the roof. Those are mainly air flow for cooling and the reduction of solar gain, in combination with their effects on daylight. Their investigation was based on a chain of dependencies to be integrated in the design process. With respect to that, parametric modelling was used. Parametric modelling allows both geometrical entities and their relationships to be represented. These relationships are structured in a hierarchical chain of dependencies, established during the preliminary parameterization process. The independent properties of the model are usually expressed through independent parameters, and their variations generate different configurations of the model. By making use of this potential, three project scales were parametrically explored. At the large scale, parametric variations of the overall shape of the roof were investigated in relation to cooling through ventilation and here the parametric model allowed for the generation of both different configurations of the roof, including its structural morphology and variations of its structural tessellation. At the medium scale, the integration of openable modules was investigated in relation to air extraction for cooling; with respect to this, the parametric model allows exploring openings based on variations of size and distribution. At the small scale, various options were explored for the cladding system, in order to reduce the direct solar gain while still allowing the income of indirect natural light. The parametric model was used to investigate the configuration of self-shading modules and their integration in the structure. Specific emphasis will be given to the small scale. The advantages in design process and the current limits of the parametric modelling approach used here will be discussed in the paper.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2010.457
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_127
id	ascaad2010_127
authors	Hubers, Hans
year	2010
title	Collaborative Parametric BIM
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 127-134
summary	The paper will be focussing on a number of digital design tools used in [our groups credentials]. A new laboratory called […] is developed with Virtual Reality for collaborative architectural design. A brief description of the systems and how they are used to support a design team is given. Synchronic and a-synchronic, local and inter-local communication is made possible. Methods for introducing sustainability in the digital design process and user participation over the Internet will be discussed. The results of the author’s PhD research “Collaborative architectural design in virtual reality” are used to develop a new approach in which team members use their own specific software. Swarm design applications developed in Virtools are used at the start of a project. The objects in the swarm can be urban and architectural functional volumes. Examples of the first are houses, offices, factories, roads and water ways. Examples of the second are working, dining, shopping and waiting spaces. Relations between the functional volumes with or without constraints make the functional volumes swarm to find equilibrium. Everything is dynamic, meaning that relations and functional volumes can change any time. Alternatives can be developed using different values for these parameters and by top-down intervention. When the final global layout has been chosen, using a criteria matrix with sustainability criteria to be judged by all participants, including the future users, a next phase is started amongst professionals using parametric design software. A study into different types of parametric design software makes clear why object parametric software can be used for IFC based BIM, while the more interesting process parametric software can not. To make this clear a pragmatic description of the IFC format is given with a simple example of such a file. Future research will be proposed in which applications of different disciplines are connected through the application programming interfaces, while integrating as much as possible the building information and knowledge in the IFC format.
series	ASCAAD
type	normal paper
email
last changed	2011/03/01 07:48

_id	ecaade2010_073
id	ecaade2010_073
authors	Tokuhara, Toshiki; Fukuda, Tomohiro; Yabuki, Nobuyoshi
year	2010
title	Development of a City Presentation Method by Linking Viewpoints of a Physical Scale Model and VR
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.747-754
doi	https://doi.org/10.52842/conf.ecaade.2010.747
wos	WOS:000340629400080
summary	The design of a city has a great influence on its society. Therefore, current/future cities must be understandable by everyone, regardless of their ability to use technology. Various tools have been used to show urban spaces. The authors focused on SCMODs (physical scale models), and VR (Virtual Reality). These are three-dimensional and intuitive expression methods. In this study, a city presentation method offering a united operating environment linking viewpoint information between a SCMOD and VR is developed and evaluated. Photogrammetry acquires aspect information with a laser pointer, an AR marker and a web camera. To evaluate this method, 36 testees answered a questionnaire after experiencing the method. The testees evaluated the method positively.
keywords	City presentation; Physical scale model; VR; TUI; Photogrammetry
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2010_148
id	ecaade2010_148
authors	Joyce, Sam; Tabak, Vincent; Sharma, Shrikant; Williams, Chris
year	2010
title	Applied Multi-Scale Design and Optimization for People Flow
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.633-639
doi	https://doi.org/10.52842/conf.ecaade.2010.633
wos	WOS:000340629400068
summary	This paper presents an overview of the current developments in people flow analysis in Buro Happold’s analytical group SMART Solutions. The role of people flow analysis has become an established one, within many leading consultancy firms with their own specialist groups supporting the architects and planners in the design of buildings and urban spaces. This paper proposes that the key development in the progression of this work is a due to a change in emphasis, away from a passive analysis task where its key role is to validate assumptions of flow and alleviate areas of high concern to using the process as a design instigator/driver. The new paradigm emerging, involves calculating people flow at the conceptual stage of a project in collaboration with the respective architectural firm, and using this information as a primary design input. This paper describes and analyses the two objectives set out by Buro Happold’s SMART group in order to improve the process of design; firstly to make it more prominent in the design environment and secondly to see if it has the potential to work as a design driver. These objectives create a design methodology defined by people flow and suggest value in innovating and conceiving of robust simple methods of improving designs.
keywords	People flow; Pedestrian flow; Multi-objective optimization; Masterplanning; Network analysis
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_149
id	ecaade2010_149
authors	Salim, Flora Dilys; Burry, Jane; Taniar, David; Lee, Vincent Cheong; Burrow, Andrew
year	2010
title	The Digital Emerging and Converging Bits of Urbanism: Crowddesigning a live knowledge network for sustainable urban living
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.883-891
doi	https://doi.org/10.52842/conf.ecaade.2010.883
wos	WOS:000340629400094
summary	Data is ubiquitous in our cities. However, designing a knowledge network about our cities is an arduous task, given that data sensed cannot be used directly, human significance must be added. Adding human significance can be achieved via an automated “expert system (ES)” in which domain expert knowledge are stored in a knowledge-based repository. The domain expert knowledge is matched with the corresponding data to derive specific inference which can aid decision making for urban stakeholders.This requires amalgamation of various interdisciplinary techniques. This paper presents a survey of existing technologies in order to investigate the emerging issues surrounding the design of a live knowledge network for sustainable urban living. The maps and models of the existing infrastructure of our cities that include a wealth of information such as topography, layout, zoning, land use, transportation networks, public facilities, and resource network grids need to be integrated with real-time spatiotemporal information about the city. Public data in forms of archives and data streams as well as online data from the social network and the Web can be analyzed using data mining techniques. The domain experts need to interpret the results of data mining into knowledge that will augment the existing knowledge base and models of our cities. In addition to the analysis of archived and streamed data sources from the built environment, the emerging state-of-the-art Web 2.0 and mobile technologies are presented as the potential techniques to crowddesign a live urban knowledge network. Data modeling, data mining, crowdsourcing, and social intervention techniques are reviewed in this paper with examples from the related work and our own experiments.
keywords	Crowdsourcing; Knowledge discovery; Mobile and ubiquitous computing; Urban modeling; Spatial interaction; Social networking; Web 2.0
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia10_263
id	acadia10_263
authors	Beaman, Michael Leighton; Bader, Stefan
year	2010
title	Responsive Shading \| Intelligent Façade Systems
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 263-270
doi	https://doi.org/10.52842/conf.acadia.2010.263
summary	As issues of sustainability gain traction for architects, methodologies for designing, analyzing, and calibrating design solutions have emerged as essential areas of research and development. A number of approaches have been pursued with regard to embedding data into the design process, most fall into one of two approaches to research. The first approach is to mediate environmental impact at the level of applied technology; the second alters building methods and material construction, generating efficient energy use. However, few approaches deal with the crafting of relationships between information and performance on an architectural level. We will examine an approach focused on understanding how crafting relationships between information and design can move architecture towards achieving sustainability. In developing this approach, we created a data-driven design methodology spanning from design inception to construction. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. By contextualizing the solutions generated, we were able design though a set of specific and controlled responses rather than as a singular solution. Information utilization requires a new kind of craft that moves beyond instances into relationships and offers performance sensitive issues in design a focused trajectory. We applied this method to the research and development of a responsive shading structure built in conjunction with a thermal testing lab for two test locations – Austin, Texas (Figure. 1 and 2) and Munich, Germany. The following paper chronicles the design and construction at the Texas site over an academic semester.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2010_249
id	ascaad2010_249
authors	Hawker, Ronald; Dina Elkady and Thomas Tucker.
year	2010
title	Not Just Another Pretty Face
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 249-260
summary	Digital Heritage has gained popularity recently as means of dynamically representing and reconstructing historic buildings and cityscapes. Simultaneously this new medium of visualization affords another approach to examine human-virtual environment interaction and offers possibilities of exploiting virtual environments as educational tools. At Zayed University, a federal university primarily for women citizens of the United Arab Emirates, we have integrated student-faculty research and documented and reconstructed a number of historical buildings within the curriculum of the Department of Art and Design. We have further collaborated with the animation program at Winston Salem State University in North Carolina, utilizing the motion capture laboratory at the Center of Design Innovation to literally breathe life into these reconstructions. The primary idea is to contribute to the ongoing documentation of the country’s heritage through creating “responsive virtual heritage environments” where the spectator is actively engaged in exploring the digital space and gain certain degrees of control over the course and scheme of the dynamic experience. The process begins by introducing students to utilize the diverse capabilities of CAD and three dimensional computer applications and intertwine the technical skills they acquire to construct virtual computer models of indigenous built environments. The workflow between the different applications is crucial to stimulate students’ problem solving abilities and tame the application tools, specifically when constructing complex objects and structural details. In addition the spatial and temporal specificity different computer applications afford has proven useful in highlighting and analyzing the buildings’ function within the extreme climate of the country and their role in the political-economy, particularly in visualizing the ephemeral qualities of the architecture as they relate to passive cooling and the inter-relationships between built and natural environments. Light and time settings clarify shadow casting and explain the placement and orientation of buildings. Particle simulations demonstrate the harnessing of wind and rain both urban and rural settings. The quantitative data accumulated and charted through CAD and VR programs and geo-browsers can be integrated with qualitative data to create a more holistic analytical framework for understanding the complex nature of past settlement patterns. In addition, the dynamic nature of this integration creates a powerful educational tool. This paper reviews this ongoing research project with examples of reconstructions completed across the country, demonstrating analytical and educational possibilities through the integration of CAD programs with a range of other statistical, geographic, and visualization software.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_090
id	ecaade2010_090
authors	Ladouce, Nicolas; Hee, Limin; Janssen, Patrick T.
year	2010
title	Urban Space Planning for Sustainable High Density Environment
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.777-785
doi	https://doi.org/10.52842/conf.ecaade.2010.777
wos	WOS:000340629400083
summary	In this paper we investigate the possibilities of new typologies of urban public space for high density environments. The premise for the project would be that with new high-density typologies, it would be necessary to consider a difference in the nature of urban public spaces rather than a difference in degree from the status quo. From observations of urban patterns that drive collective, hybrid spaces around Asia, relationships between urban attributes are drawn. For this paper we shall focus on the particular case of Linked Hybrid, Beijing, China, as an elevated urban public space. A literature review focuses on reviewing key theories to construct and adopt a rating system to develop an empirical framework to evaluate the case studies and extract the key attributes. These rated attributes are then abstracted in a real-time model that enables user manipulation. The purpose is to create a tool to better observe the effects and evolution of planning decisions for future urban spaces in high density contexts. The preliminary results are consistent with the idea that selected spatial parameters of a space may be embedded into a “barcode” and referenced as a type. The combination of different types, hence their parameters may be used for effective replication of their characteristics to improve the decision-making process for urban designers. The research is not intended to reproduce the successful urban public spaces but rather result in a catalogue of typologies which can be referred to during the initial stages of planning to provide an indication of spatial qualities.
keywords	High density environments; Collective urban space; Hybrid typologies; Parametric urbanism
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2010_035
id	caadria2010_035
authors	Lo, Chia-Hui; Ih-Cheng Lai and Teng-Wen Chang
year	2010
title	Playing jigsaw: finding the underlying structure of assembling ideas within design productive process
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 371-380
doi	https://doi.org/10.52842/conf.caadria.2010.371
summary	Idea generation in design productive process often occurs within brainstorming sessions. Linking ideas is the key mechanism in this process to produce design. Through linking ideas, a graph-like knowledge is representing the individual memories with the nodes and arcs that are the ideas and the links between ideas respectively. Design is the process of puzzle-making, such thinking process is similar to play jigsaw. This research applies a computational tool (called DIM) to produce a graph-like knowledge including diverse jigsaw-like ideas and their relationships. Then we use protocol analysis to understand how designers organise the ideas. The objective is to find the hidden patterns of assembling ideas in the design productive process. Some feasibilities of the game mechanisms are proposed in this paper.
keywords	design production; linking ideas; graph-like knowledge; protocol analysis; puzzle-making
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2010_050
id	caadria2010_050
authors	Salim, Flora Dilys; Hugo Mulder and Jane Burry
year	2010
title	A system for form fostering: Parametric modeling of responsive forms in mixed reality
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 531-540
doi	https://doi.org/10.52842/conf.caadria.2010.531
summary	This paper investigates the integration of mixed reality with parametric modeling. This supports the concept of Form Fostering, which goes beyond the traditional form finding. Form Fostering takes sensory input from the physical world to inform a parametric model. We will present a prototype of the system that we have developed, which includes the use of a Wii Remote, an Arduino processing board, servo actuators and a camera as haptic input and interaction devices for Form Fostering. The potential benefits of designing in mixed reality are significant since designers can get real-time feedback from both the physical context and from changing physical design constraints represented by virtual parametric relationships. In order to leverage seamless interaction and activity between the physical and the virtual world, it is invaluable to consider sensing as an input for design.
keywords	Parametric modeling; mixed reality; responsive architecture; responsive form; physical interaction; form fostering
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2010_224
id	ecaade2010_224
authors	Trento, Armando; Fioravanti, Antonio; Loffreda, Gianluigi
year	2010
title	Ontologies for Cities of the Future: The quest of formalizing interaction rules of urban phenomena
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.797-804
doi	https://doi.org/10.52842/conf.ecaade.2010.797
wos	WOS:000340629400085
summary	“A city can not be designed” Watanabe [1]: our ambition can be at the maximum to guide someway and in some part its growth. So as planners need tools to aid an open design with uncertain goals. This research group beginto develop such a tool at high level of abstraction (Fioravanti 2008), with theaim of investigating the potentiality of a collaboration among complementary research domains. The present work reports about early implementation results of an innovative approach developed by the authors, for representation of design knowledge. It has been identified in the Urban Design Ontology (Montenegro and Duarte 2009) some design entities and their internal relationships that have been formalized and visualized by means of an intuitive interface. As a matter of fact, this approach, by means of inference engines allows coherence’s check and constraint verification, pointing out incompatibility between initial design program and each partial specialist design solution and/or the overall shared one.
keywords	Knowledge formalization; Urban design ontology; Knowledge structure; Collaborative design; Open design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	acadia10_379
id	acadia10_379
authors	Geiger, Jordan; San Fratello, Virginia
year	2010
title	Hyperculture: Earth as Interface
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 379-384
doi	https://doi.org/10.52842/conf.acadia.2010.379
summary	Digital Fabrication and Hybrid Interface: Lessons in Agriculture :abstract Two vitally important fields of work in architecture and computing—in digital fabrication methods and in the development of interfaces between digital and analog systems—can find new forms in their combination with one another. Moreover, a recent such experiment in the production of landscape rather than building not only suggests a number of implications for architectural work, but of ecological, economic and urban structures that underlie the projects’s visible formal and aesthetic orders. This project, “Hyperculture: Earth as Interface,” studied the potential outcomes of modifying a commonly employed information infrastructure for the optimization of agricultural production throughout most of America’s heartland; and that same infrastructure’s latent flexibility to operate in both “read” and “write” modes, as a means for collaborative input and diversified, shared output. In the context of industrialized agriculture, this work not only negotiates seemingly contradictory demands with diametrically opposed ecological and social outcomes; but also shows the fabrication of landscape as suggestive of other, more architectural applications in the built environment. The Hyperculture project is sited within several contexts: industrial, geographically local, ecological, and within the digital protocols of landscape processing known as “precision agriculture.” Today, these typically work together toward the surprising result of unvariegated repetition, known commonly as monoculture. After decades of monoculture’s proliferation, its numerous inefficiencies have come under broad recent scrutiny, leading to diverse thinking on ways to redress seemingly conflicting demands such as industry’s reliance on mass-production and automation; the demand for variety or customization in consumer markets; and even regulatory inquiries into the ecological and zoning harms brought by undiversified land use. Monoculture, in short, is proving unsustainable from economic, environmental, and even aesthetic and zoning standpoints. But its handling in digital interfaces, remote sensing and algorithmically directed fabrication is not.
keywords	GPS, precision agriculture, digital landscape fabrication, interface, analog/digital systems, open source platform, digital fabrication, multi-dimensional scales
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2010_047
id	caadria2010_047
authors	Tai, Nan-Ching and Mehlika Inanici
year	2010
title	Lighting in real and pictorial spaces: a computational framework to investigate the scene-based lighting distributions and their impact on depth perception
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 501-510
doi	https://doi.org/10.52842/conf.caadria.2010.501
summary	Architects often use two-dimensional media to represent, visualise, and study the three-dimensional qualities of un-built spaces. Knowledge of pictorial cues is a powerful design tool that can be used to enhance the spatial qualities of built environments. This paper draws from the recent developments in computer graphics (physically based renderings and perceptually based tone mapping techniques) and demonstrates the utilisation of a computational framework to generate pictorial spaces that can mimic perceptual reality. Computer simulation and psychophysical research methodologies are employed to examine the relationship between the lighting patterns introduced by architectural configurations and their impacts on depth perception. The research demonstrates that physically and perceptually based renderings can be used to study depth perception; and luminance contrast in an architectural scene is an effective pictorial cue that increases the perceived spatial depth.
keywords	Depth perception; pictorial cue; lighting simulation; physically based rendering; high dynamic range imagery
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2010_043
id	ecaade2010_043
authors	Meyboom, AnnaLisa; Wojtowicz, Jerzy
year	2010
title	Urban Infrastructure & Architectronics
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.133-141
doi	https://doi.org/10.52842/conf.ecaade.2010.133
wos	WOS:000340629400014
summary	The future of urban infrastructure is no doubt a future of control systems. An architecture that engages infrastructure can engage control systems to not only improve efficiency and mediate contested urban space but also to modifying spaces for different uses, buffer environmental factors and respond to occupation or use. The use of mechatronics in architecture requires interdisciplinary collaboration and an understanding of control systems, sensors and actuators. Through a theoretical project, research and a design studio, this paper discusses the future of mechatronics in architecture and shows the huge potential for reimagining our infrastructure. The application to the infrastructural realm pushes the design out of the scope of conventional architecture both in the use of mechatronics and its application to the larger realm of the city.
keywords	Mechatronics; Infrastructure; Architecture; Control systems; Robotics
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ascaad2010_189
id	ascaad2010_189
authors	Allahaim, Fahad; Anas Alfaris and David Leifer
year	2010
title	Towards Changeability
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 189-200
summary	Many buildings around the world have undergone successive changes over their life cycles. Regardless of the type or size of a building there are usually requirements for change due to several unanticipated forces and emerging uncertainties that act upon them. These changes might be in the building’s spatial, structural or service systems. This can be due to changes in the needs of occupants, the market demand or technological advances. Although buildings undergo change, current design practice does not address this and buildings are still designed as if they will remain static. This paper proposes an Adaptable Buildings Design (ABD) Framework to address the issue of adaptability in building design. Using this methodology uncertainties and future changes are first identified. To increase the building’s longevity, flexibility options are embedded and design rules are formulated to trigger these options when necessary. The value of adaptability is then assessed by implementing several simulations using Real Options Analysis (ROA). To demonstrate the approach, the ABD is applied to a multi-use commercial building case study. Flexibility is embedded in the building’s design across several systems allowing it to change and evolve over time based on a set of design rules. The buildings adaptability is then assessed using ROA. Positive results demonstrate the strength of the proposed methodology in addressing future change and uncertaintie.
series	ASCAAD
email
last changed	2011/03/01 07:36

For more results click below: