Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 62

Reformat results as: short short into frame detailed detailed into frame

_id	acadia11_186
id	acadia11_186
authors	Chaturvedi, Sanhita; Colmenares, Esteban; Mundim, Thiago
year	2011
title	Knitectonics
doi	https://doi.org/10.52842/conf.acadia.2011.186
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 186-195
summary	The project Knitectonics aims at exploring digital fabrication systems that facilitate optimized, adaptive and specific integrated architectural solutions (Male-Alemany 2010). It is inspired by the beauty of nature systems with their inherent efficiency and performance. The research explored on-site fabrication of monocoques shells, integrating skin and structure along with services and infrastructure, using a simple household technique. It thus embodies a self organized micro system of textures and a macro system of structures. This paper elaborates how the numeric aspects of a textile technique were used, first to digitally imitate the process of assembly and further exploited to develop and visualize a novel fabrication system, based on material research and technical experimentation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2017_042
id	ecaade2017_042
authors	Hitchings, Katie, Patel, Yusef and McPherson, Peter
year	2017
title	Analogue Automation - The Gateway Pavilion for Headland Sculpture on the Gulf
doi	https://doi.org/10.52842/conf.ecaade.2017.2.347
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 347-354
summary	The Waiheke Gateway Pavilion, designed by Stevens Lawson Architects originally for the 2010 New Zealand Venice Biennale Pavilion, was brought to fruition for the 2017 Headland Sculpture on the Gulf Sculpture trail by students from Unitec Institute of Technology. The cross disciplinary team comprised of students from architecture and construction disciplines working in conjunction with a team of industry professionals including architects, engineers, construction managers, project managers, and lecturers to bring the designed structure, an irregular spiral shape, to completion. The structure is made up of 261 unique glulam beams, to be digitally cut using computer numerical control (CNC) process. However, due to a malfunction with the institutions in-house CNC machine, an alternative hand-cut workflow approach had to be pursued requiring integration of both digital and analogue construction methods. The digitally encoded data was extracted and transferred into shop drawings and assembly diagrams for the fabrication and construction stages of design. Accessibility to the original 3D modelling software was always needed during the construction stages to provide clarity to the copious amounts of information that was transferred into print paper form. Although this design to fabrication project was challenging, the outcome was received as a triumph amongst the architecture community.
keywords	Digital fabrication; workflow; rapid prototyping; representation; pedagogy
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2010_205
id	sigradi2010_205
authors	Miotto, Bruscato Underléa; García Alvarado Rodrigo
year	2010
title	Muro - pixel: exploración digital de un sistema constructivo de placas entrelazadas [Muro - pixel: digital exploration of a constructive system with interlocking plates]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 205-208
summary	This paper reports the initial development of a constructive system based on interlocked boards manufactured through digital fabrication. The system is based on the elaboration of grooves in regular pieces by a laser - cutter or CNC - machines to develop self - supported configurations. A parametric design system has been designed and several material models and full - scale prototypes have been built. Although the system requires evaluation of its structural features, production and maintenance, it offers novel building alternatives. This experience set up an innovative way of performing experimental research to develop new products and possible designs.
keywords	digital fabrication, constructive system, parametric design, flexible wall, assembly
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2011_165
id	ecaade2011_165
authors	Riether, Gernot; Jolly, Knox
year	2011
title	Flexible Systems: Flexible Design, Material and Fabrication: The AIA pavilion as a case study
doi	https://doi.org/10.52842/conf.ecaade.2011.628
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.628-634
summary	This paper is about the fabrication process of the DesCours pavilion, a project that was realized in the context of a graduate design studio in the Fall Semester of 2010. The assembly and construction process of the pavilion will be used to show how parametric software, such as Grasshopper can inform fabrication and material systems. The paper will explain the fabrication process of a pavilion in detail and make an argument for plastic as a material that not only responds to the malleable characteristic of digital tools but also to environmental issues.
wos	WOS:000335665500073
keywords	Design Build; Grasshopper; CNC; Parametric Design; Digital Fabrication; Plastic
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia17_512
id	acadia17_512
authors	Rossi, Andrea; Tessmann, Oliver
year	2017
title	Collaborative Assembly of Digital Materials
doi	https://doi.org/10.52842/conf.acadia.2017.512
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 512- 521
summary	Current developments in design-to-production workflows aim to allow architects to quickly prototype designs that result from advanced design processes while also embedding the constraints imposed by selected fabrication equipment. However, the enduring physical separation between design space and fabrication space, together with a continuous approach to both design, via NURBs modeling software, and fabrication, through irreversible material processing methods, limit the possibilities to extend the advantages of a “digital” approach (Ward 2010), such as full editability and reversibility, to physical realizations. In response to such issues, this paper proposes a processto allow the concurrent design and fabrication of discrete structures in a collaborative process between human designer and a 6-axis robotic arm. This requires the development of design and materialization procedures for discrete aggregations, including the modeling of assembly constraints, as well as the establishment of a communication platform between human and machine actors. This intends to offer methods to increase the accessibility of discrete design methodologies, as well as to hint at possibilities for overcoming the division between design and manufacturing (Carpo 2011; Bard et al. 2014), thus allowing intuitive design decisions to be integrated directly within assembly processes (Johns 2014).
keywords	material and construction; construction/robotics; smart assembly/construction; generative system
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ascaad2010_075
id	ascaad2010_075
authors	Schubert, Gerhard; Kaufmann Stefan and Petzold Frank
year	2010
title	Project Wave 0.18
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 75-88
summary	In recent years a number of projects have been emerged, in which the new possibilities of the computer as a design tool, have been used. Through the digital chain from design to manufacturing the efficiency has increased and allows the implementation of complex architectural structures. With all these new opportunities, also new challenges arise in the teaching and the educational concepts. The paper describes the detailed course concept and the didactic strategy using the example of a parametric designed roof structure, we designed, planed and build up in scale 1:1 within the main course. „Wendepunkt\|e im Bauen“ (Turning point\|s of building) is the name of an exhibition at the “Pinakothek der Moderne” in Spring 2010. In addition to contributions of the industrialization in the building industry from 1850 to the present day, the exhibition also serves as a platform, to demonstrate new possibilities of computer-aided parametric design and the closely related computer aided manufacturing (CAM). In this context, we took the chance to build a sculpture in Scale 1:1 to show the potential of a constant digital workflow and the digital fabrication. Through the digital chain from design to manufacturing, the efficiency has been increased by the computer and allows the implementation of new complex architectural structures. But the efficiency of the high-degree-automation through the use of computerized machines usually ends in the production of the components. Because this coincidence of the elements in the assembly often proves cost and time, the aim of the project was to optimize both, the production of components and their assembly as well. As part of the wintercourse 2009/2010 different aspects of automation have been reviewed and new solutions have been analyzed. Together with 15 students of the Faculty of Architecture the complete digital chain started with the first design ideas, about parametric programming through production and assembly had been researched, implemented and brought to reality. In the first steps, the students had to learn about the potential, but also about the problems coming with the digital-design and the attached digital-production. There for the course took part at our computerlab. In weekly workshops, all ideas have been implemented and tested directly in the 3-dimensional parametric model. And thanks to the interdisciplinary work with the Department of Structural Design also static factors had been considered, to optimize the form. Parallel to the digital form-finding process, the first prototypes have been produced by the students. By using the chairs 3D-CNC-Mills we were able to check the programmed connection detail in reality and apply the so learned lessons to the further development. After nearly 3 month of research, designing, planning and programming, we were able to produce the over 1000 different parts in only 4 days. By developing a special pre-stressed structure and connection detail it was also possible, to assemble the whole structure (13.5m x 4.5m x 4m) in only one day. The close connection between digital design (CAD) and digital manufacturing (CAM) is an important point of our doctrine. By the fact, that the students operate the machines themselves, but also implement projects on a scale of 1:1, they learn to independently evaluate these new tools and to use them in a meaningful way.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2013_135
id	caadria2013_135
authors	Williams, Nick; Daniel Davis, Brady Peters, Alexander Peña De León, Jane Burry and Mark Burry
year	2013
title	FabPOD: An Open Design-to-Fabrication System
doi	https://doi.org/10.52842/conf.caadria.2013.251
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 251-260
summary	Digital workflows from the design to the production of buildings have received significant recent attention in architectural research. The need for both integrated systems for design collaboration (Boeykens and Neuckermans, 2006) and clear and flexible communication flows for non-standard fabrication outcomes have been identified as fundamental (Scheurer, 2010). This paper reports on the development of a digital “design system” for the design and prototyping of an acoustic enclosure for meetings in a large open work environment, theFabPod. The aim was to keep this system open for temporal flexibility in as many aspects of the finalisation of the design as possible. The system provides novel examples of both integrated collaboration and clear communication flow. (1) Acoustics is included as a design driver in early stages through the connection of digital simulation tools with design models. (2) Bi-directional information flows and clear modularisation of workflow underpins the system from design through to fabrication and assembly of the enclosure. Following the completion and evaluation of the FabPod prototype, the openness of the system will be tested through its application in subsequent design and prototyping iterations. Design development will respond to performance testing through user engagement methods and acoustic measurement.
wos	WOS:000351496100025
keywords	Digital workflow, Prototyping, Acoustic simulation, Collaborative design
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ijac20108401
id	ijac20108401
authors	Attar, Ramtin; Robert Aish, Jos Stam, et al.
year	2010
title	Embedded Rationality: A Unified Simulation Framework for Interactive Form Finding
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 39
summary	This paper describes embedded rationality as a method for implicitly combining fabrication constraints into an interactive framework for conceptual design. While the concept of ‘embedded rationality’ has been previously discussed in the context of a parametric design environment, we employ this concept to present a novel framework for dynamic simulation as a method for interactive form-finding. By identifying categories of computational characteristics, we present a unified physics-solver that generalizes existing simulations through a constraint-based approach. Through several examples we explore conceptual approaches to a fixed form where the resulting effects of interacting forces are produced in real-time. Finally, we provide an example of embedded rationality by examining a constraint-based model of fabrication rationale for a Planar Offset Quad (POQ) panelization system.
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_029
id	caadria2010_029
authors	Baerlecken, Daniel; Martin Manegold, Judith Reitz and Arne Kuenstler
year	2010
title	Integrative parametric form-finding processes
doi	https://doi.org/10.52842/conf.caadria.2010.303
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 303-312
summary	The recent developments in digital technologies and contemporary design tools are initiating new approaches of form-finding based on parametric development of multiple geometries with simultaneous consideration of various aspects. This paper focuses on the use of advanced parametric CAD systems and reformulated construction logics to enhance the potential and possibilities of form finding processes. This approach is exemplified through the “Greenhouse Trauttmansdorff project”. The project demonstrates a form finding approach which is based on defined parameters that not only fulfil aesthetic and functional aspects, but simultaneously take structural properties and the resulting sun shading behaviour into account. We will explore within this paper how – next to the functional and contextual building requirements – required illumination levels inside the greenhouse create a feedback loop between the structural system and its cladding system.
keywords	parametric representations; digital technologies; digital fabrication; variable systems; load bearing construction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia10_313
id	acadia10_313
authors	Banda, Pablo
year	2010
title	Parametric Propagation of Acoustical Absorbers
doi	https://doi.org/10.52842/conf.acadia.2010.313
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 313-319
summary	The following paper deals with a performance-driven morphogenetic design task to improve the conditions of room acoustics, using as a case study the material laboratory of the School of Architecture at Federico Santa Maria University of Technology. Combining contemporary Parametric Modeling techniques and a Performance- Based approach, an automatic generative system was produced. This system generated a modular acoustic ceiling based on Helmholtz Resonators. To satisfy sound absorption requirements, acoustic knowledge was embedded within the system. It iterates through a series of design sub-tasks from Acoustic Simulation to Digital Fabrication, searching for a suitable design solution. The internal algorithmic complexity of the design process has been explored through this case study. Although it is focused on an acoustic component, the proposed design methodology can influence other experiences in Parametric Design.
keywords	Parametric Modeling, Sound Absorption & Acoustic Knowledge, Performance-Based Design, Design Task, Scripting, Digital Fabrication, Custom Tools, Honeycomb.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2010_272
id	sigradi2010_272
authors	Banda, Pablo
year	2010
title	Absorbente de panal de abejas: explorando la adición de performance en sistemas de modelado paramétrico [Absorbing honeycomb: exploring performance addition in parametric modeling systems]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 272-275
summary	This paper analyzes the characteristics of the development of generative systems, originated by embedding knowledge of sound absorption within a parametric design system and implementing Helmholtz Resonators for the decrement of low frequencies of sound. The encounter between physically - related knowledge and explicit geometric processes is observed by focusing on contemporary author skills and design postures to outline methodological traces for a performance - based approach to parametric design.
keywords	parametric modeling, performance - based design, digital fabrication, scripting, custom tools
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia10_333
id	acadia10_333
authors	Blough, Lawrence
year	2010
title	Digital Tracery: Fabricating Traits
doi	https://doi.org/10.52842/conf.acadia.2010.333
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 333-339
summary	Recently, prototyping enabled by CNC technology has found its way into design practice where concepts can be quickly and economically tested through multiple design iterations that closely approximate the realities of oneto- one construction. This has lead to the promise of renewed research in tectonics and constructional techniques where the traditional concepts of craft and the joint, that were once married to the hand, can be rediscovered through the agency of mass customization. If we apply the lineage of the trait—a representational and cognitive tool to marry complex form with the exigencies of construction—pedagogical approaches can be developed that extend the current interest in intricate surface, structural morphology and geometry towards a robust materiality rooted in componentry, the joint, and part-to-whole relationships. This paper will introduce several threads from the twentieth century that have informed these tendencies in contemporary design practice, emerging from the well spring of Viollet-le-Duc. The thesis is supported by undergraduate model-based research employing digital design and fabrication techniques.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	acadia10_145
id	acadia10_145
authors	Briscoe, Danelle
year	2010
title	Information Controlled Erosion
doi	https://doi.org/10.52842/conf.acadia.2010.145
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 145-150
summary	This paper documents research of a design process that interrelates a single information model to 5-axis, waterjet cutting technology. With the intention of creating an optimized design, data is streamed through a building information model that controls geometry parametrically by a component/system relationship. At the scale of a 4’x8’ panel, material properties and pattern variability act as underlying initiators of design rather than post-rational information. In a manner uncommon to the discipline, the information model is being used as a generative tool, rather than as one for mere documentation. The research assigns a limestone wall type to the panel—a material predominantly used in areas where it is indigenous and typically desirable for its texture, color, and thermal properties. The intention is to develop potentialities through material specificity in the information model’s conceptualization. The water-jet process is then used to erode the limestone to achieve varying fields of scalar voids. In addition, the thickness of wall cladding attenuates for figuration and interest. The final stone panels transition from a rain screen system to a solar screen that modulates light, thereby linking environmental intentions to current technological capabilities. The information model is exported for analysis of daylight and structural dynamic qualities and quantities as part of the workflow. Parameters within the information model database facilitate a dimensionally controlled iterative process. Moreover, fabricating with building materials via the information model expedites a design and makes possible for materiality to move beyond merely conceptual representation.
keywords	digital fabrication, information model
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia10_364
id	acadia10_364
authors	Cabrinha, Mark
year	2010
title	Parametric Sensibility: Cultivating the Material Imagination in Digital Culture
doi	https://doi.org/10.52842/conf.acadia.2010.364
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 364-371
summary	Digital fabrication and parametric tools require not only digital dexterity but a robust material sensibility that precedes digital mediation. Developed through Gaston Bachelard’s concept of the graft, the material imagination acts as a reciprocal creative intelligence to today’s dominant formal imagination enabled through the fluid geometric precision in digital tools. This paper presents a series of “materials first” pedagogical approaches through which material constraints become operative design criteria in the development of digital skills. This intersection between analog and digital systems develops a parametric sensibility that is demonstrated through physical prototypes and full-scale installations. This approach is implicitly a critique of the disregard of material logic in many parametric approaches in particular, and digital design culture in general. Conversely, the development of a parametric sensibility through analog means enables the development of material primitives from which parametric tools can expand the material imagination while giving structure to it.
keywords	Parametric, Digital Fabrication, Analog, Digital
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2010_065
id	ascaad2010_065
authors	Celani, Gabriela; Jose_ Duarte and Regiane Pupo
year	2010
title	Introducing Digital Fabrication Laboratories in Architecture Schools
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 65-74
summary	The present paper proposes a set of guidelines for the implementation of digital fabrication laboratories for education and research in architecture schools. These guidelines are based on authors´ experiences in creating two of such laboratories, one in Brazil and another one in Portugal. They are also based on visits to existing labs throughout the world and interviews with their coordinators. The objective is to help architecture schools plan new facilities or run recently established ones. For this reason, the chapter will be organized in topics and will include a checklist and some specific examples of equipment, software and results, as well as cost estimations. The issues addressed will include various aspects.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_078
id	ecaade2010_078
authors	Chiu, Yun-Ying
year	2010
title	How To Make The Soft Skin?: A preliminary framework for the parametric design of the bionic soft skin
doi	https://doi.org/10.52842/conf.ecaade.2010.237
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.237-242
summary	This paper is a presentation of the preliminary framework for the design and fabrication of the soft-skin. Today, the digital technology applied in the architecture field is everywhere. However, there are still lots of fantastic free form architecture uncompleted and remained on the paper architecture or only the digital visual simulated model. Until now, most of the finished free form cases are consisted of the skin and bones, or only the bones. The complete soft-skin cases without the bones are fewer and the process remains untold. Based on the parametric environments and biology, how might you design a free form without the bones? How could you make the soft skin stand up? The research starts a series of exploration of the design and fabrication for the soft skin, and seeks to propose the preliminary framework as a helpful reference for the designers who deal with the soft skin project.
wos	WOS:000340629400025
keywords	Soft skin; Bionic architecture; Parametric design; Grasshopper
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2010_146
id	sigradi2010_146
authors	Choma, Joseph
year	2010
title	CONTESTED BOUNDARIES: Digital Fabrication + Hand Craft
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 146-149
summary	This research investigates the relationship between efficiency, precision and tactile variation within architectural design and fabrication. A digitally driven design may be seamlessly precise and consistent but also feel sterile and distant from the human body. A materially driven design may be intimate and tactile but lack the accuracy needed to connect elements. Digital fabrication techniques are combined with hand craft material manipulations in search of a unique hybrid tectonic that merges connection accuracies with subtle but sensual divergences between repeating modules. Prototypes have been constructed at the object and inhabitable scale.
keywords	instrumentality, tacit knowledge, digital fabrication, hand craft, design and computation
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	acadia20_464
id	acadia20_464
authors	Elberfeld, Nathaniel; Tessmer, Lavender; Waller, Alexandra
year	2020
title	A Case for Lace
doi	https://doi.org/10.52842/conf.acadia.2020.1.464
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 464-473.
summary	Textiles and architecture share a long, intertwined history from the earliest enclosures to contemporary high-tech tensile structures. In the Four Elements of Architecture, Gottfried Semper (2010) posited wickerwork and carpet enclosures to be the essential origins of architectural space. More recently, architectural designers are capitalizing on the characteristics of textiles that are difficult or impossible to reproduce with other material systems: textiles are pliable, scalable, and materially efficient. As industrial knitting machines join robotic systems in architecture schools with fabrication- forward agendas, much of the recent developments in textile-based projects make use of knitting. In this paper, we propose an alternative textile technique, lacemaking, for architectural fabrication. We present a method for translating traditional lacemaking techniques to an architectural scale and explore its relative advantages over other textiles. In particular, we introduce bobbin lace and describe its steps both in traditional production and at an architectural scale. We use the unique properties of bobbin lace to form workflows for fabrication and computational analysis. An example of computational analysis demonstrates the ability to optimize lace-based designs towards particular labor objectives. We discuss opportunities for automation and consider the broader implications of understanding a material system relative to the cost of labor to produce designs using it.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2012_261
id	ecaade2012_261
authors	Feringa, Jelle; Sondergaard, Asbjorn
year	2012
title	Design and Fabrication of Topologically Optimized Structures; An Integral Approach - A Close Coupling Form Generation and Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2012.2.495
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 495-500
summary	Integral structural optimization and fabrication seeks the synthesis of two original approaches; that of topological optimization (TO) and robotic hotwire cutting (HWC) (Mcgee 2011). TO allows for the reduction of up to 70% of the volume of concrete to support a given structure (Sondergaard & Dombernowsky 2011). A strength of the method is that it allows to come up with structural designs that lie beyond the grasp of traditional means of design. A design space is a discretized volume, delimiting where the optimization will take place. The number of cells used to discretize the design space thus sets the resolution of the TO. While the approach of the application of TO as a constitutive design tool centers on structural aspects in the design phase (Xie 2010), the outcome of this process are structures that cannot be realized within a conventional budget. As such the ensuing design is optimal in a narrow sense; whilst optimal structurally though, construction can be prove to be prohibitively expensive.
wos	WOS:000330320600052
keywords	Topology optimization; robotics; hotwire cutting; EPS formwork; concrete structures
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2010_384
id	sigradi2010_384
authors	García, Alvarado Rodrigo; Turkienicz Benamy
year	2010
title	Generative House: Exploration of Digital Fabrication and Generative System for Low - cost Housing in Southern Brazil
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 384-387
summary	Generative House is a collaborative exploration of advanced technologies for lower - and working - class housing carried out by industrial and academic partners in southern Brazil. It seeks to test generative procedures and digital manufacturing to develop a flexible building system for low - cost sustainable housing in order to inspire future developments in this field by developing an urban grammar through manufacturing models and generative programming, as well as parametric design of panels assembled using digital fabrication. Scale models and full - scale prototype with timber boards have been built, demonstrating the feasibility of the approach proposed. However, further refinement of the adopted procedures and technical applications is required.
keywords	low - cost housing, generative programming, parametric design, digital manufacturing, collaborative development
series	SIGRADI
email
last changed	2016/03/10 09:52

For more results click below: