Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 37

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_161
id	ascaad2010_161
authors	Loemker, Thorsten Michael
year	2010
title	Design and Simulation of Textile Building Elements
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 161-170
summary	In this paper we examine the use of textile building elements and investigate on their potential scope of application in architecture. Other than commonly used for spanned or tent-like structures we concentrate on the use of textiles for folded, crinkled and procumbent assemblies, as these seem to correspond much better with the textiles´ inherent properties. On closer examination of these properties it becomes obvious that fabric primarily exists in a loose, uneven and irregular physicality that can be adjusted and configured into different states that match specific criteria. That is why fabric is mainly used for covering, protecting or hiding objects, e.g. as apparel for people. Only at a second glance does one recognize that textiles can be used for many other purposes such as collecting, separating, filtering or even healing. Thus, in the first instance of this research we examined customary usages and classified them into different categories that aided us to further develop practical application areas for the architectural domain. Subsequently to the fact that the shape of a textile might alter under the influence of forces, the further focus of this research lied on the appraisal of digital simulation techniques and simulation engines to provide sophisticated instruments for the generation of the associated time-based geometric form of the fabric. External elements that might drive this deformation process such as wind, temperature, precipitation, as well as static and dynamic building components were considered in the simulation process in order to generate visual output of the corresponding shapes. Studies about bipartite materials that can control the deformation process and might lead the textile beyond its primary functionality conclude this work.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_022
id	ecaade2010_022
authors	Al-kazzaz, Dhuha; Bridges, Alan; Chase, Scott
year	2010
title	Shape Grammars for Innovative Hybrid Typological Design
doi	https://doi.org/10.52842/conf.ecaade.2010.187
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.187-195
summary	This paper describes a new methodology of deriving innovative hybrid designs using shape grammars of heterogeneous designs. The method is detailed within three phases of shape grammars: analysis, synthesis and evaluation. In the analysis phase, the research suggests that original rules of each design component are grouped in subclass rule sets to facilitate rule choices. Additionally, adding new hybrid rules to original rules expands the options available to the grammar user. In the synthesis phase, the research adopts state labels and markers to drive the design generation. The former is implemented with a user guide grammar to ensure hybridity in the generated design, while the latter aims to ensure feasible designs. Lastly evaluation criteria are added to measure the degree of innovation of the hybrid designs. This paper describes the derivation of hybrid minaret designs from a corpus of heterogeneous traditional minaret designs.
wos	WOS:000340629400020
keywords	Shape grammar; Parallel grammar; Hybrid design; Typology
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2010_039
id	ascaad2010_039
authors	Almusharaf, Ayman M.; Mahjoub Elnimeiri
year	2010
title	A Performance-Based Design Approach for Early Tall Building Form Development
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 39-50
summary	This paper presents a methodological interactive design approach within which structure is integrated into tall building form development. The approach establishes a synergy between generative and analytical tools to allow for parallel interaction of the formal and structural design considerations during the conceptual design phase. An integration of the associative modeling system, Grasshopper, and the structural analysis tool, ETABS was established, and a bi-directional feedback link between the two tools was initiated to guide the iterative from generation process. A design scenario is presented in this paper to demonstrate how the parametric generation and alteration of architectural form can be carried out based on instant feedback on the structural performance. Utilizing such a tool, architects can not only develop improved understanding of structural needs, but also realize their formal ideas structurally and materially.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_084
id	ecaade2010_084
authors	Beirao, Jose; Mendes, Gelly; Duarte, Jose; Stouffs, Rudi
year	2010
title	Implementing a Generative Urban Design Model: Grammar-based design patterns for urban design
doi	https://doi.org/10.52842/conf.ecaade.2010.265
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.265-274
summary	This paper shows the first results of a prototype implementation of a generative urban design tool. This implementation will form part of a design support tool for a GIS based platform defined to formulate, generate and evaluate urban designs. These three goals, formulation, generation and evaluation are integrated by connecting three modules developed individually for each goal. In this paper we focus on the implementation of the generation module showing a prototype developed on the Integrated Development Environment (IDE) of AutoCAD Civil 3D. This implementation attempts to encode the design moves of the urban planner into design patterns supported on grammar formalisms which allow for design synthesis and design exploration in the field of urban design.
wos	WOS:000340629400028
keywords	Shape grammars; Design patterns; Generative urban design; CAD
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac20108102
id	ijac20108102
authors	Budroni, Angela; Jan Boehm
year	2010
title	Automated 3D Reconstruction of Interiors from Point Clouds
source	International Journal of Architectural Computing vol. 8 - no. 1, 55-73
summary	We present a new technique for the fully automated 3D modelling of indoor environments from a point cloud. The point cloud is acquired with several scans and is afterwards processed in order to segment planar structures, which have a noticeable architectural meaning (floor, ceiling and walls) in the interior. The basic approach to data segmentation is plane sweeping based on a hypothesis-and-test strategy. From the segmentation results, the ground plan is created through cell decomposition by trimming the two-dimensional ground space using half-space primitives. An extension in height of the ground contours makes the generation of the 3D model possible. The so-reconstructed indoor model is saved in CAD format for analysis and further applications or, simply, as a record of the interior geometry.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2010_197
id	sigradi2010_197
authors	Bustos, L Gabriela I.
year	2010
title	Epistemología compleja de diseño arquitectónico con tecnología digital: primera generación en un taller virtual [Complex epystemology in architecture design with digital technologies: first generation at a virtual workshop]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 197-200
summary	The goal of this paper—part of a doctoral dissertation—is to define a complex epistemology of design that uses digital technology by using Edgar Morin’s study of the theory of complexity to illustrate the concepts of principles and complex paradigms in architectonic design. This paper also establishes the position of digital technology as it is strategically applied in design education in the Architectonic Project I Workshop in the FAD LUZ with participation in Las Americas Virtual Design Studio 2009.
keywords	digital technology, complex epistemology, architectural designs
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia10_218
id	acadia10_218
authors	Chok, Kermin; Donofrio, Mark
year	2010
title	Structure at the Velocity of Architecture
doi	https://doi.org/10.52842/conf.acadia.2010.218
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 218-226
summary	This paper outlines a digital design workflow, utilized by the authors, which actively links the geometry platforms being utilized by architects with tools for structural analysis, design, form-finding, and optimization. This workflow leads to an accelerated generation and transfer of information to help guide and inform the design process. The engineering team is thus empowered to augment the architect’s design by ensuring that the design team is conscious of the structural implications of design decisions throughout the design process. A crucial element of this design process has been the dynamic linkage of parametric geometry models with structural analysis and design tools. This reduces random errors in model generation and allows more time for critical analysis evaluation. However, the ability to run a multitude of options in a compressed time frame has led to ever increasing data sets. A key component of this structural engineering workflow has become the visualization and rigorous interpretation of the data generated by the analysis process. The authors have explored visualization techniques to distill the complex analysis results into graphics that are easily discernable by all members of the design team.
keywords	Workflows, Structure, Collaboration, Visualizations, Analysis
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	sigradi2010_260
id	sigradi2010_260
authors	Christakou, Evangelos D.
year	2010
title	Luz natural: avaliação dinâmica e interativa nos ambientes arquitetônicos virtuais [Natural light: assessment in dynamic and interactive virtual architectural environments]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 260-263
summary	Real time walkthrough is a valuable resource, especially in the early stages of the design process. Assessing how shadows and reflections behave enables architects to make better choices regarding materials, geometry and lighting. Traditional methods do not offer daylight simulations in real time, whereas interactive visualization requires large computational resources to allow an evaluation of behavior of light in architectural space. This project researched virtual environments that permit the real - time generation of interactive scenes that simulate natural light algorithms modeled. The goal of this is to meet the needs of architects when evaluating the changes of a dynamic and synchronous project.
keywords	computer simulation, real - time rendering, architectural walkthrough
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	sigradi2010_316
id	sigradi2010_316
authors	Correa, Madrigal Ómar; Gutiérrez Julio Óscar; González Montoya Giraldo Andrés
year	2010
title	Generador de entornos virtuales en tiempo real basado en capas [Generating real - time virtual environments based on layers]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 316-319
summary	The generation of virtual environments in real time is presently a highly researched subject. It has great potential to reduce the development time of virtual reality products and to create very large environments with a wide variety of content. These benefits have become very popular in the development of video games and simulators. This work proposes a new generation system—a layer generator that incorporates the best features of such systems with real - time and new generation techniques. To the present, the layer generator has been applied to games, and may potentially be used with other systems.
keywords	layer generation, real time, virtual environment, development
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ecaade2012_261
id	ecaade2012_261
authors	Feringa, Jelle; Sondergaard, Asbjorn
year	2012
title	Design and Fabrication of Topologically Optimized Structures; An Integral Approach - A Close Coupling Form Generation and Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2012.2.495
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 495-500
summary	Integral structural optimization and fabrication seeks the synthesis of two original approaches; that of topological optimization (TO) and robotic hotwire cutting (HWC) (Mcgee 2011). TO allows for the reduction of up to 70% of the volume of concrete to support a given structure (Sondergaard & Dombernowsky 2011). A strength of the method is that it allows to come up with structural designs that lie beyond the grasp of traditional means of design. A design space is a discretized volume, delimiting where the optimization will take place. The number of cells used to discretize the design space thus sets the resolution of the TO. While the approach of the application of TO as a constitutive design tool centers on structural aspects in the design phase (Xie 2010), the outcome of this process are structures that cannot be realized within a conventional budget. As such the ensuing design is optimal in a narrow sense; whilst optimal structurally though, construction can be prove to be prohibitively expensive.
wos	WOS:000330320600052
keywords	Topology optimization; robotics; hotwire cutting; EPS formwork; concrete structures
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia10_103
id	acadia10_103
authors	Flöry, Simon; Pottmann, Helmut
year	2010
title	Ruled Surfaces for Rationalization and Design in Architecture
doi	https://doi.org/10.52842/conf.acadia.2010.103
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 103-109
summary	In this work, we address the challenges in the realization of free-form architecture and complex shapes in general with the technical advantages of ruled surfaces. We propose a geometry processing framework to approximate (rationalize) a given shape by one or multiple strips of ruled surfaces. We discuss techniques to achieve an overall smooth surface and develop a parametric model for the generation of curvature continuous surfaces composed of ruled surface strips. We illustrate the usability of the proposed process at hand of several projects, where the pipeline has been applied to compute NC data for mould production and to rationalize large parts of free-form facades.
keywords	geometry processing; architectural geometry; ruled surface; strip model; surface fitting
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	caadria2010_012
id	caadria2010_012
authors	Gu, Ning; Vishal Singh and Kathryn Merrick
year	2010
title	A framework to integrate generative design techniques for enhancing design automation
doi	https://doi.org/10.52842/conf.caadria.2010.127
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 127-136
summary	This paper presents and demonstrates a computational framework that facilitates the integration of different generative design techniques to enhance design automation. The framework is based on the evaluation and comparison of four main generative design algorithms. Effectiveness of the framework is demonstrated through an example scenario. Compared to most existing generative design systems that are based on one of the techniques, which often bias the generative design process in a certain direction, new generative design systems by applying the proposed framework will provide the trigger at each stage as demonstrated in the example scenario for the designer to perceive the emergent designs from different viewpoints. This advantage will enhance design generation and automation by assisting the designer in making more informed decisions in understanding and selecting the suitable generative techniques for different design needs.
keywords	Generative design systems; shape grammars; L-systems; cellular automata; genetic algorithms
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2010_192
id	ecaade2010_192
authors	Hansmeyer, Michael
year	2010
title	From Mesh to Ornament: Subdivision as a generative system
doi	https://doi.org/10.52842/conf.ecaade.2010.285
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.285-293
summary	This paper explores the use of subdivision algorithms for the production of three-dimensional ornament. In a first step, this paper presents modifications to the Catmull Clark and Doo Sabin processes’ weighting schemes. In a second step, it proposes how these modified processes can be applied specifically to the generation of ornament. It presents methods for specifying weights using parameters both intrinsic and extrinsic to the mesh. Strategies for working with both very uniform and more differentiated input meshes are considered.
wos	WOS:000340629400030
keywords	Subdivision; Ornament; Generative system
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2010_065
id	ecaade2010_065
authors	Hardy, Steve(n); Lundberg, Jonas
year	2010
title	Environmental Catalysts for a Computational Urbanism
doi	https://doi.org/10.52842/conf.ecaade.2010.805
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.805-814
summary	It is perhaps no longer relevant to discuss digital tools purely as means in themselves; the growth of abstract systems or computational patterns for their own sake simply strain justification in light of real-world concerns such as climate change and economic crises. While growing concerns over climate change have necessitated an increased interest in sustainable urbanism and design, sustainability has done little to yet alter the morphological and typological consequences of architectural space (Hardy, 2008). In a series of overlapping research projects and design studio briefs, students, research assistants and we worked with the iterative and variable processes of Rhinoscript, McNeel’s Grasshopper and Bentley’s Generative Components to explore the possibilities of changing environmental extremes (specifically flooding) as catalysts for providing new urban morphologies and spatial organizations. Working between the master plan and the individual housing unit, we investigated arrays of terrace homes in the London Thames Valley flood zones while simultaneously exploring the potential for computational generation and parametric optimization.
wos	WOS:000340629400086
keywords	Computational urbanism; Formative strategies; Parametric design; Adaptive vs. mitagative; Environmental formations
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ijac20108302
id	ijac20108302
authors	Hladik, Pavel; Clive J Lewis
year	2010
title	Singapore National Stadium Roof
source	International Journal of Architectural Computing vol. 8 - no. 3, pp. 257-278
summary	The case study focuses on design of the Singapore National Stadium roof and its architectural and structural constraints. The dialog between performance form generation and aesthetics was challenged through several design iterations and is critically reviewed in this paper. The collaboration of engineers and architects gave a form to this significant building that was slightly changed several times due to various conditions. The complex shape of the dome structure was resolved in one parametric model that could react on aesthetical and structural requirements. The landmark roof structure generated in computer had to be evaluated by designers and presented to decision making bodies.
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_004
id	caadria2010_004
authors	Jowers, Iestyn; Miquel Prats, Hesham Eissa and Ji-Hyun Lee
year	2010
title	A study of emergence in the generation of Islamic geometric patterns
doi	https://doi.org/10.52842/conf.caadria.2010.039
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 39-48
summary	Generative design is concerned with the definition and exploration of design spaces, and it has been suggested that emergence plays a key role in this process. In this paper, the impact of emergence on a design space is explored via consideration of different methods used to generate designs in a particular style. Three distinct methods of generating Islamic geometric patterns have been investigated and the extent to which emergence is employed in these methods has been explored. This research supports a discussion on the role of emergence in generative design, and an investigation into how design spaces are affected by the type of emergence employed in a generative process.
keywords	Islamic geometric patterns; emergence; design space; design generation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2010_097
id	ecaade2010_097
authors	Kontovourkis, Odysseas
year	2010
title	Computer-Generated Circulation Diagrams in Macro-Scale Design Investigation
doi	https://doi.org/10.52842/conf.ecaade.2010.623
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.623-632
summary	This paper demonstrates an ongoing research investigation, which is the continuation of the author’s doctoral research on a computer-based design approach that is used for the generation of circulation diagrams, and the spatial organization of functional areas in macro-scale design level. The paper introduces a computer program that is based on the idea of particle behavior modeling. The program simulates the human movement behavior in real time and in parallel, based on simple rules of interaction between particles. The model is called a ‘virtual force’ model, since the interaction between particles, and hence human movement behavior modeling, is achieved by using various forces that are acting upon each particle. Any changes on the rules of interaction can produce different results, allowing architects to investigate various design possibilities and study the human movement behavior in different design case studies. In this paper the idea of modeling such movement behavior is investigated and developed further, in order for it to be used for the design of circulation systems, and to suggest solutions to problems that occur in public areas of cities.
wos	WOS:000340629400067
keywords	Circulation diagrams; Human movement behavior; Macro-scale design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2010_142
id	ecaade2010_142
authors	Labelle, Guillaume; Nembrini, Julien; Huang, Jeffrey
year	2010
title	Geometric Programming Framework: ANAR+: Geometry library for Processing
doi	https://doi.org/10.52842/conf.ecaade.2010.403
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.403-410
summary	This paper introduces a JAVA based library for parametric modeling through programming. From the recent advent of scripting tools integrated into commercial CAAD software and everyday design practice, the use of programming applied to an architectural design process becomes a necessary field of study. The ANAR+ library is a parametric geometry environment meant to be used as programming interface by designers. Form exploration strategies based on parametric variations depends on the internal logic description, a key role for form generation. In most commercial CAD software, geometric data structures are often predefined objects, thus constraining the form exploration, whereas digital architectural research and teaching are in need for an encompassing tool able to step beyond new software products limitations. We introduce key concepts of the library and show a use of the library within a form finding process driven by irradiance simulation.
wos	WOS:000340629400043
keywords	Processing; JAVA; Scene graph; Parametric modeling; Geometry
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_214
id	ecaade2010_214
authors	Lemberski, David; Hemmerling, Marco
year	2010
title	Mixer Modeling – An Intuitive Design Tool: Using a hardware controller to actuate parametric design software
doi	https://doi.org/10.52842/conf.ecaade.2010.453
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.453-458
summary	Music and architecture share not only phenomenological similarities in relation to their characteristics - like volume, timbre, tone pitch, instrumentation vs. geometry, materiality, light ambiance or perspective - but imply as well comparability in the process of creation. The investigation of digital tools that cross borders between music and architecture was the starting point for the research project „Mixer Modeling“. Against this background the paper discusses the transformation of a musical composition controller into an intuitive design tool for the generation of architectural geometries. In the same amount that the use of a MIDI-controller increases the degrees of freedom for the simultaneous activation of various parameters the definition of geometric dependencies on the level of visual programming become more important for the resulting geometry.
wos	WOS:000340629400049
keywords	Intuitive design tool; Parametric design; Music and architecture; Hardware controller; MIDI; Visual programming; Human-computer interaction
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2010_036
id	caadria2010_036
authors	Liao, Hsiu-Ting; Teng-Wen Chang and Ih-Cheng Lai
year	2010
title	Storytelling: a computational approach for convergent thinking
doi	https://doi.org/10.52842/conf.caadria.2010.381
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 381-390
summary	Convergent thinking is an important skill in early design process to deal with the complexity and dynamic nature of design. In this research, by exploring the storytelling mechanism as one way to develop an idea generation representation called DIM (Dynamic Idea Map), we investigate characteristics of convergent process during the brainstorming experiments we conducted. A computational platform called Idea Story (Idea as Storytelling) is proposed which produces a narrative and helps generate a meaningful representation.
keywords	Storytelling; convergent thinking; idea map; design narrative
series	CAADRIA
email
last changed	2022/06/07 07:59

For more results click below: