Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 240

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20108101
id	ijac20108101
authors	Phan, Viet Toan; Seung Yeon Choo
year	2010
title	Augmented Reality-Based Education and Fire Protection for Traditional Korean Buildings
source	International Journal of Architectural Computing vol. 8 - no. 1, 75-91
summary	This study examines an application of Augmented Reality technology (AR) for Korean Cultural Traditional Buildings, specifically, the Namdaemun Gate, "National Treasure No 1" of the Republic of Korea. Unfortunately, in February 2008, the Namdaemun Gate burned down, despite the efforts of many firemen, as the main difficulty was getting the fire under control without any structural knowledge of the wooden building. Hence, with the great advances in digital technology, an application of virtual technical information to traditional buildings is needed, and the new technology of AR offers many such advantages for digital architectural design and construction fields. While AR is already being considered as new design approach for architecture, outdoor AR is another practical application that can take advantage of new wearable computer equipment (Head-mounted display also know as HMD, position and orientation sensors, and mobile computing) to superimpose virtual graphics of traditional buildings (in this case, Namdaemun Gate) in a real outdoor scene. Plus, outdoor AR also allows the user to move freely around and inside a 3D virtual construction, thereby offering important training opportunities, for example, specific structural information in the case of firemen and mission planning in the case of a real-life emergency. In this example, the proposed outdoor AR system is expected to provide important educational information on traditional wooden building for architects, archaeologists, and engineers, while also assisting firemen to protect such special buildings.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	ecaade2010_193
id	ecaade2010_193
authors	Dillenburger, Benjamin
year	2010
title	Space Index: A retrieval-system for building-plots
doi	https://doi.org/10.52842/conf.ecaade.2010.893
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.893-899
summary	Increasingly, digital architectural data will become available through information technology. Yet until now, there were no satisfying methods to query this data for architectural purposes. This paper introduces an information retrieval system for parcels that not only allows searching for specific attributes, but also includes properties of shape and context of the building plots. An automatically generated index stores the relevant spatial properties as normalized bitmap images on several layers. When a query is started, only this index has to be queried and not the complete database. The search process can be controlled through a graphical interface that incorporates the user’s sketches. The retrieved parcels are presented as a sorted list of vector drawings including their contained buildings. With the simplified access to these case-studies, quality and efficiency of the architectural design process could be increased.
wos	WOS:000340629400095
keywords	Architecture-retrieval; Shape matching; Indexing; Operationalization; Urban morphology; Case-based reasoning
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2010_127
id	ascaad2010_127
authors	Hubers, Hans
year	2010
title	Collaborative Parametric BIM
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 127-134
summary	The paper will be focussing on a number of digital design tools used in [our groups credentials]. A new laboratory called […] is developed with Virtual Reality for collaborative architectural design. A brief description of the systems and how they are used to support a design team is given. Synchronic and a-synchronic, local and inter-local communication is made possible. Methods for introducing sustainability in the digital design process and user participation over the Internet will be discussed. The results of the author’s PhD research “Collaborative architectural design in virtual reality” are used to develop a new approach in which team members use their own specific software. Swarm design applications developed in Virtools are used at the start of a project. The objects in the swarm can be urban and architectural functional volumes. Examples of the first are houses, offices, factories, roads and water ways. Examples of the second are working, dining, shopping and waiting spaces. Relations between the functional volumes with or without constraints make the functional volumes swarm to find equilibrium. Everything is dynamic, meaning that relations and functional volumes can change any time. Alternatives can be developed using different values for these parameters and by top-down intervention. When the final global layout has been chosen, using a criteria matrix with sustainability criteria to be judged by all participants, including the future users, a next phase is started amongst professionals using parametric design software. A study into different types of parametric design software makes clear why object parametric software can be used for IFC based BIM, while the more interesting process parametric software can not. To make this clear a pragmatic description of the IFC format is given with a simple example of such a file. Future research will be proposed in which applications of different disciplines are connected through the application programming interfaces, while integrating as much as possible the building information and knowledge in the IFC format.
series	ASCAAD
type	normal paper
email
last changed	2011/03/01 07:48

_id	ascaad2010_075
id	ascaad2010_075
authors	Schubert, Gerhard; Kaufmann Stefan and Petzold Frank
year	2010
title	Project Wave 0.18
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 75-88
summary	In recent years a number of projects have been emerged, in which the new possibilities of the computer as a design tool, have been used. Through the digital chain from design to manufacturing the efficiency has increased and allows the implementation of complex architectural structures. With all these new opportunities, also new challenges arise in the teaching and the educational concepts. The paper describes the detailed course concept and the didactic strategy using the example of a parametric designed roof structure, we designed, planed and build up in scale 1:1 within the main course. „Wendepunkt\|e im Bauen“ (Turning point\|s of building) is the name of an exhibition at the “Pinakothek der Moderne” in Spring 2010. In addition to contributions of the industrialization in the building industry from 1850 to the present day, the exhibition also serves as a platform, to demonstrate new possibilities of computer-aided parametric design and the closely related computer aided manufacturing (CAM). In this context, we took the chance to build a sculpture in Scale 1:1 to show the potential of a constant digital workflow and the digital fabrication. Through the digital chain from design to manufacturing, the efficiency has been increased by the computer and allows the implementation of new complex architectural structures. But the efficiency of the high-degree-automation through the use of computerized machines usually ends in the production of the components. Because this coincidence of the elements in the assembly often proves cost and time, the aim of the project was to optimize both, the production of components and their assembly as well. As part of the wintercourse 2009/2010 different aspects of automation have been reviewed and new solutions have been analyzed. Together with 15 students of the Faculty of Architecture the complete digital chain started with the first design ideas, about parametric programming through production and assembly had been researched, implemented and brought to reality. In the first steps, the students had to learn about the potential, but also about the problems coming with the digital-design and the attached digital-production. There for the course took part at our computerlab. In weekly workshops, all ideas have been implemented and tested directly in the 3-dimensional parametric model. And thanks to the interdisciplinary work with the Department of Structural Design also static factors had been considered, to optimize the form. Parallel to the digital form-finding process, the first prototypes have been produced by the students. By using the chairs 3D-CNC-Mills we were able to check the programmed connection detail in reality and apply the so learned lessons to the further development. After nearly 3 month of research, designing, planning and programming, we were able to produce the over 1000 different parts in only 4 days. By developing a special pre-stressed structure and connection detail it was also possible, to assemble the whole structure (13.5m x 4.5m x 4m) in only one day. The close connection between digital design (CAD) and digital manufacturing (CAM) is an important point of our doctrine. By the fact, that the students operate the machines themselves, but also implement projects on a scale of 1:1, they learn to independently evaluate these new tools and to use them in a meaningful way.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
doi	https://doi.org/10.52842/conf.caadria.2010.327
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia10_372
id	acadia10_372
authors	Dierichs, Karola; Menges, Achim
year	2010
title	Material Computation in Architectural Aggregate Systems
doi	https://doi.org/10.52842/conf.acadia.2010.372
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 372-378
summary	Aggregates are defined as large amounts of elements being in loose contact. In architecture they are mainly known as an additive in concrete construction. Relatively few examples use aggregates in their unbound form as an architectural material system in their own right. The investigation of potential architectural applications however is both a very relevant and unexplored branch of design research. Loose granular systems are inherently different from other architectural construction systems. One of the most decisive distinctions lies in the way information on those granular architectural systems is being generated, processed, and integrated into the design process. Several mathematical methods have been developed to numerically model granular behaviour. However, the need and also the potential of using so-called ,material’ computation is specifically relevant with aggregates, as much of their behaviour is still not being described in these mathematical models. This paper will present the current outcome of a doctorate research on aggregate architectures with a focus on information processing in machine and material computation. In the first part, it will introduce definitions of material and machine computation. In the second part, the way machine computation is employed in modelling granulates will be introduced. The third part will review material computation in granular systems. In the last part, a concrete example of an architectural aggregate model will be explained with regard to the given definition of material computation. Conclusively a comparative overview between material and machine computation in aggregate architectures will be given and further areas of development will be outlined.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia10_103
id	acadia10_103
authors	Flöry, Simon; Pottmann, Helmut
year	2010
title	Ruled Surfaces for Rationalization and Design in Architecture
doi	https://doi.org/10.52842/conf.acadia.2010.103
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 103-109
summary	In this work, we address the challenges in the realization of free-form architecture and complex shapes in general with the technical advantages of ruled surfaces. We propose a geometry processing framework to approximate (rationalize) a given shape by one or multiple strips of ruled surfaces. We discuss techniques to achieve an overall smooth surface and develop a parametric model for the generation of curvature continuous surfaces composed of ruled surface strips. We illustrate the usability of the proposed process at hand of several projects, where the pipeline has been applied to compute NC data for mould production and to rationalize large parts of free-form facades.
keywords	geometry processing; architectural geometry; ruled surface; strip model; surface fitting
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	acadia10_250
id	acadia10_250
authors	Foged, Isak Worre; Poulsen, Esben Skouboe
year	2010
title	Environmental Feedback and Spatial Conditioning
doi	https://doi.org/10.52842/conf.acadia.2010.250
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 250-257
summary	This paper illustrates responsive systems, which focus on the implementation of multi-objective adaptive design prototypes from sensored environments. The intention of the work is to investigate multi-objective criteria both as a material system and as a processing system by creating prototypes with structural integrity, where the thermal energy flow through the prototype, to be understood as a membrane, can be controlled and the visual transparency altered. The work shows performance based feedback systems and physical prototype models driven by information streaming, screening, and application.
keywords	Environmental Feedback, Hierarchical Systems, Information Processing, Homeostat
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	acadia10_379
id	acadia10_379
authors	Geiger, Jordan; San Fratello, Virginia
year	2010
title	Hyperculture: Earth as Interface
doi	https://doi.org/10.52842/conf.acadia.2010.379
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 379-384
summary	Digital Fabrication and Hybrid Interface: Lessons in Agriculture :abstract Two vitally important fields of work in architecture and computing—in digital fabrication methods and in the development of interfaces between digital and analog systems—can find new forms in their combination with one another. Moreover, a recent such experiment in the production of landscape rather than building not only suggests a number of implications for architectural work, but of ecological, economic and urban structures that underlie the projects’s visible formal and aesthetic orders. This project, “Hyperculture: Earth as Interface,” studied the potential outcomes of modifying a commonly employed information infrastructure for the optimization of agricultural production throughout most of America’s heartland; and that same infrastructure’s latent flexibility to operate in both “read” and “write” modes, as a means for collaborative input and diversified, shared output. In the context of industrialized agriculture, this work not only negotiates seemingly contradictory demands with diametrically opposed ecological and social outcomes; but also shows the fabrication of landscape as suggestive of other, more architectural applications in the built environment. The Hyperculture project is sited within several contexts: industrial, geographically local, ecological, and within the digital protocols of landscape processing known as “precision agriculture.” Today, these typically work together toward the surprising result of unvariegated repetition, known commonly as monoculture. After decades of monoculture’s proliferation, its numerous inefficiencies have come under broad recent scrutiny, leading to diverse thinking on ways to redress seemingly conflicting demands such as industry’s reliance on mass-production and automation; the demand for variety or customization in consumer markets; and even regulatory inquiries into the ecological and zoning harms brought by undiversified land use. Monoculture, in short, is proving unsustainable from economic, environmental, and even aesthetic and zoning standpoints. But its handling in digital interfaces, remote sensing and algorithmically directed fabrication is not.
keywords	GPS, precision agriculture, digital landscape fabrication, interface, analog/digital systems, open source platform, digital fabrication, multi-dimensional scales
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ecaade2010_067
id	ecaade2010_067
authors	Guzik, Agata
year	2010
title	Digital Fabrication Inspired Design: Influence of fabrication parameters on a design process
doi	https://doi.org/10.52842/conf.ecaade.2010.227
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.227-235
summary	Considering the use of a particular digital fabrication method, this research intends to look into the design-production relation and attempts to answer the question of how the manufacturing parameters can be integrated into the design process to facilitate the design-to-production communication. It is argued that the above is achievable through the application of a simulationbased algorithmic procedures derived from the inherent logic of a fabrication machine’s functionality. It has been studied through creation of two custom tools facilitating the design process – a library for the Processing programming language and a bespoke design procedure - both based on a functionality of the CNC milling machine. Finally, the conclusion is made that broader implementation of custom design procedures with underlying digital fabrication logic has a potential of altering the design process and facilitate the design-tofactory communication.
wos	WOS:000340629400024
keywords	Digital fabrication; Design process; Optimization; Genetic algorithm; CNC milling
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2013_228
id	caadria2013_228
authors	Gün, Onur Y. and Elliot E. Greenblatt
year	2013
title	Tran[s] Quillity: The Dynamically Mediated Façade
doi	https://doi.org/10.52842/conf.caadria.2013.955
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 955-964
summary	Media façades grant infinitely many faces to a building and can change the architectural meaning of what a façade is. They can also help to transform the face of the building into an over-size communication device for public (Borras, 2010). Contemporary media façades mostly rely on the content of their screens, and only a small number of them physicality of the screen itself. Precedent building façades that incorporate moving componentsareunable to function as displays. In this paper we present a media façade design, titled“Tran[s]quillity”, in which we fuse reconfigurable building com-ponents with display technologies to achieve a unique design. As well as fulfilling the function of a regular media wall -as a crisp screen- we imagine Tran[s]quillity as a transformable kinetic sculpture that can act as a screen of physical depth to introduce greater functionality and interactivity.
wos	WOS:000351496100098
keywords	Media, Façade, Kinetic, LED, Image processing, Digital, Design, Architecture
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia10_183
id	acadia10_183
authors	Ireland, Tim
year	2010
title	Stigmergic Planning
doi	https://doi.org/10.52842/conf.acadia.2010.183
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 183-189
summary	This paper presents an application of swarm intelligence towards the problem of spatial configuration. The methodology classifies activities as discrete entities, which self-organise topologically through associational parameters: an investigation of emergent route formation and spatial connectivity based on simple agent and pheromone interaction, coupled with the problem of ‘loose’ rectangular geometric assembly. A concept model sniffingSpace (Ireland, 2009) developed in Netlogo (Willensky, 1999), which established the self-organising topological capacity of the system, is extended in Processing (Fry & Rea, 2009) to incorporate rectangular geometry towards the problem of planning architectural space.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	acadia10_203
id	acadia10_203
authors	Jaskiewicz, Tomasz
year	2010
title	(In:)forming Interactive Architectural Systems, Case of the xMAiA Meta-model
doi	https://doi.org/10.52842/conf.acadia.2010.203
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 203-210
summary	This paper positions the domain of interactive architecture (iA) and searches for an appropriate model for structure and processing of information in the design and operation of such architecture. It is shown that there are different approaches to ways in which iA system models can be defined, each with numerous advantages and disadvantages. However, due to complexity of encountered problems, application of such models can be only partially validated by simulation and hence their design is inherently dependent on creation of operational and experiential full-scale prototypes of the systems these models represent. Another observation is the lack of correspondence between existing iA models and other contemporary models of computation for architectural geometry, fabrication and engineering. A meta-model for extensible multi-agent interactive architecture (xMAiA) is consequently proposed as a remedy to this situation. xMAiA meta-model is aimed to provide an open framework for integrated evolution, development and operation of interactive architectural systems. It delivers an extensible platform, in which diverse, project-specific models and approaches can be implemented, tested, and further evolved. Such a platform has the potential to empower agile development and operation of interactive architectural ecologies, as well as to substantially facilitate integration of creative design and experiential prototyping from day-1 of project design and development cycle. An example application conforming to the xMAiA meta-model is consequently presented and illustrated with a case study project performed in the university education context.
keywords	multi agent systems, interactive architecture, responsive architecture, design tools
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2010_158
id	ecaade2010_158
authors	Kuo, Jeannette; Zausinger, Dominik
year	2010
title	Scale and Complexity: Multi-layered, multi-scalar agent networks in time-based urban design
doi	https://doi.org/10.52842/conf.ecaade.2010.651
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.651-657
summary	Urban design, perhaps even more than architecture, is a timedependent discipline. With its multi-layered complexities, from individual buildings to entire regions, decisions made at one level, that may not show effect immediately, may prove to have disastrous consequences further down the line. The need to incorporate time-based simulations in urban modeling, and the demand for a means of evaluating the changes have led to explorations with multi-agent systems in computation that allow for decisions to be decentralized. From the first basic rule-based system of Conway’s Game of Life [1] to recent urban simulations developed at institutions like the ETH Zurich [2], or UCL CASA [3], these programs synthesize the various exigencies into complex simulations so that the designer may make informed decisions. It is however not enough to simply use parametrics in urban design. Rules or desires implemented at one scale may not apply to another, while isolating each scalar layer for independent study reverts to the disjunctive and shortsighted practices of past planning decisions. Central to current parametric research in urban design is the need to deal with multiple scales of urbanism with specific intelligence that can then feed back into the collective system: a networked parametric environment. This paper will present the results from a city-generator, developed in Processing by Dino Rossi, Dominik Zausinger and Jeannette Kuo, using multiagent systems that operate interactively at various scales.
wos	WOS:000340629400070
keywords	Agent-based modeling; Cellular automata; Parametric urbanism; Neural network; Complexity; Genetic algorithm; Urban dynamics
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_111
id	ecaade2010_111
authors	Morello, Eugenio; Carneiro, Cla_udio; Desthieux, Gilles
year	2010
title	The Use of Digital 3-D Information to Assess Urban Environmental Quality Indicators
doi	https://doi.org/10.52842/conf.ecaade.2010.499
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.499-506
summary	This paper anticipates the use of 3-D data for the environmental analysis of cities, aiming to provide useful tools for urban designers. The extraction of urban environmental quality (UEQ) indicators from 3-D information using innovative tools is presented. We will introduce our recent research about the implementation of computational tools for the analysis, evaluation and design of the urban space and compare results that can be obtained with different data sources. In particular, we are going to present the advantages of urban models generated from LiDAR data, by showing the case-study analysis of the measurement and quantification of urban vegetation indicators. Results show that the limitation to solar accessibility on roofs is not relevant for the case-study area. Moreover, a set of environmental and morphological indicators could inform urban designers for decision making processes about the distribution of vegetation inside the urban fabric.
wos	WOS:000340629400054
keywords	3-D information; Urban environmental quality; 2.5-D digital urban surface model; LiDAR; Digital image processing
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2011_067
id	caadria2011_067
authors	Neisch, Paulina
year	2011
title	Colour-code models: The concept of spatial network
doi	https://doi.org/10.52842/conf.caadria.2011.707
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 707-716
summary	The main goal for the architects or planners is to understand a perspective of the user. The foundation of the design process is to create buildings and environments, which will be both innovative and functional for all types of users, including adults and children. While planning the environments for children the particular aspects should be considered. The important questions are: What kind of contact does child have with the city, urban places and buildings? How does the child construct the picture of the city? What kind of urban or architectural spaces contributes to the relation that a child has with the environment? Most of the previous studies concentrating on creation of spaces for children have focused on the perspectives that have adults. According to CAADRIA 2010 paper, the objective of our study was to “learn about” (get to know the) children’s perception of everyday places. The main goal of the project was to define an appropriate tool for the design process. We identified three elements, which were considered to be the most important for child’s identification with environment: home, school, and the journey from home to school. For this purpose, children living in a residential community in Bangkok were surveyed. Contrariwise to the quantitative approach (Neisch, 2010), the concept of Colour – Code Models of space propose a qualitative development of this research – a graphic language which allow to understand the children’s spatial world, the novel way to analyze and present space, useful for educate architects and planners.
keywords	Spatial network; perception and representation of environment; drawing processing; data analyses; design for children
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ijac20108407
id	ijac20108407
authors	Pasold, Anke; Isak Worre Foged
year	2010
title	Function Follows Performance in Evolutionary Computational Processing-Vertical Evolution
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 525
summary	As the title ‘Function Follows Performance in Evolutionary Computational Processing’ suggests, this paper explores the potentials of employing multiple design and evaluation criteria within one processing model in order to account for a number of performative parameters desired within varied architectural projects. At the core lies the formulation of a methodology that is based upon the idea of human and computational selection in accordance with pre-defined performance criteria that can be adapted to different requirements by the mere change of parameter input in order to reach location specific design solutions.
series	journal
last changed	2019/05/24 09:55

_id	acadia17_512
id	acadia17_512
authors	Rossi, Andrea; Tessmann, Oliver
year	2017
title	Collaborative Assembly of Digital Materials
doi	https://doi.org/10.52842/conf.acadia.2017.512
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 512- 521
summary	Current developments in design-to-production workflows aim to allow architects to quickly prototype designs that result from advanced design processes while also embedding the constraints imposed by selected fabrication equipment. However, the enduring physical separation between design space and fabrication space, together with a continuous approach to both design, via NURBs modeling software, and fabrication, through irreversible material processing methods, limit the possibilities to extend the advantages of a “digital” approach (Ward 2010), such as full editability and reversibility, to physical realizations. In response to such issues, this paper proposes a processto allow the concurrent design and fabrication of discrete structures in a collaborative process between human designer and a 6-axis robotic arm. This requires the development of design and materialization procedures for discrete aggregations, including the modeling of assembly constraints, as well as the establishment of a communication platform between human and machine actors. This intends to offer methods to increase the accessibility of discrete design methodologies, as well as to hint at possibilities for overcoming the division between design and manufacturing (Carpo 2011; Bard et al. 2014), thus allowing intuitive design decisions to be integrated directly within assembly processes (Johns 2014).
keywords	material and construction; construction/robotics; smart assembly/construction; generative system
series	ACADIA
email
last changed	2022/06/07 07:56

_id	acadia10_299
id	acadia10_299
authors	Russo, Rhett
year	2010
title	Information as Material: Data Processing and Digital Fabrication Technologies
doi	https://doi.org/10.52842/conf.acadia.2010.299
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 299-304
summary	This paper will examine the recent transformations to architectural drawing that are occurring in the presence :abstract of information based drawing procedures and their potential for new fabrication methods. The mathematical organization of information has resulted in a more systemic, intricate, and variable approach toward making things— characteristics that have historically been associated with manual forms of craft. The shift from a geometric to an information based paradigm is allowing a wide range of industries to more easily converge. Consequently, a much broader range of interdisciplinary fabrication processes are now available to architects and designers. This confluence of numerical based machinery in other fields is providing new possibilities for architects to visualize data using a broader range of materials and techniques.
keywords	digital embroidery, information cascade, digital craft, fabrication, drawing, Processing
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

For more results click below: