Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 100

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	ecaade2010_078
id	ecaade2010_078
authors	Chiu, Yun-Ying
year	2010
title	How To Make The Soft Skin?: A preliminary framework for the parametric design of the bionic soft skin
doi	https://doi.org/10.52842/conf.ecaade.2010.237
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.237-242
summary	This paper is a presentation of the preliminary framework for the design and fabrication of the soft-skin. Today, the digital technology applied in the architecture field is everywhere. However, there are still lots of fantastic free form architecture uncompleted and remained on the paper architecture or only the digital visual simulated model. Until now, most of the finished free form cases are consisted of the skin and bones, or only the bones. The complete soft-skin cases without the bones are fewer and the process remains untold. Based on the parametric environments and biology, how might you design a free form without the bones? How could you make the soft skin stand up? The research starts a series of exploration of the design and fabrication for the soft skin, and seeks to propose the preliminary framework as a helpful reference for the designers who deal with the soft skin project.
wos	WOS:000340629400025
keywords	Soft skin; Bionic architecture; Parametric design; Grasshopper
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2010_053
id	ecaade2010_053
authors	Felasari, Sushardjanti; Peng, Chengzhi
year	2010
title	Enhancing A Virtual City with Collective Memory: A pilot study of Jalan Malioboro in Yogyakarta
doi	https://doi.org/10.52842/conf.ecaade.2010.825
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.825-831
summary	The paper reports on a pilot study of how a virtual city can be enhanced by interlinking elements of the 3D city model with the city’s collective memory represented in various digital formats. A particular street called Jalan Malioboro in Yogyakarta Indonesia has been modeled and hosted on Google Earth. Through the questionnaires returned by the participating students, we also investigate how collective memory enhanced virtual city (CREATI) could help learners to achieve goals of a particular course. The study shows that CREATI helps students to analyze the task given by providing more historical information related to the street. However it also needs further refinement and evaluation by introducing more interactive features such as enabling students to upload their own design proposals and to post additional information related to the buildings or places.
wos	WOS:000340629400088
keywords	City modeling; Collective memory; Virtual city; Google Earth; Architectural and urban design; Jalan Malioboro; e-Learning
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2010_096
id	ecaade2010_096
authors	Juvancic, Matevz; Verovsek, Spela; Jutraz, Anja; Zupancic, Tadeja
year	2010
title	Developing Shared Urban Visions Through Participation Supported by Digital Tools
doi	https://doi.org/10.52842/conf.ecaade.2010.667
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.667-676
summary	The authors base their efforts on the assumption that future cities will only be called ‘advanced’ and ‘sustainable’ if they evolve as a shared vision between the city users / dwellers (general public) and urban designers, planners, architects, engineers (experts). For visions to be shared and planning processes to be inclusive the involvement of all (urban) actors is paramount. With the increasing urban complexity and the interrelation of phenomena there is also an increasing demand for updated, advanced and re-thought digital tools that could help in forming and enabling such common urban visions. The paper outlines the agenda and connects our on-going research efforts with the fields deemed most crucial for inclusive-for-all, successful participation that can lead to shared visions of future cities. Standing out in interchangeable order and never-ending cyclic process are: (1) education, (2) communication and (3) collaboration.
wos	WOS:000340629400072
keywords	Urban design; Education; Visual communication; Collaboration; Digital tools
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ascaad2010_097
id	ascaad2010_097
authors	Kenzari, Bechir
year	2010
title	Generative Design and the Reduction of Presence
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 97-106
summary	Digital design/fabrication is slowly emancipating architectural design from its traditional static/representational role and endowing it instead with a new, generative function. In opposition to the classical isomorphism between drawings and buildings, wherein the second stand as translations of the first, the digital design/fabrication scenario does not strictly fall within a semiotic frame as much as within a quasi biological context, reminiscent of the Aristotelian notion of entelechy. For the digital data does not represent the building as much it actively works to become the building itself. Only upon sending a given file to a machine does the building begin to materialize as an empirical reality, And eventually a habitable space as we empirically know it. And until the digital data actualizes itself, the building qua building is no more than one single, potential possibility among many others. This new universe of digital design/fabrication does not only cause buildings to be produced as quick, precise, multiply-generated objects but also reduces their presence as original entities. Like cars and fashion items, built structures will soon be manufactured as routinely-consumed items that would look original only through the subtle mechanisms of flexibility: frequent alteration of prototype design (Style 2010, Style 2015..) and “perpetual profiling” (mine, yours, hers,..). The generic will necessarily take over the circumstantial. But this truth will be veiled since “customized prototypes” will be produced or altered to individual or personal specifications. This implies that certain “myths” have to be generated to speed up consumption, to stimulate excessive use and to lock people into a continuous system which can generate consumption through a vocabulary of interchangeable, layered and repeatable functions. Samples of “next season’s buildings” will be displayed and disseminated to enforce this strategy of stimulating and channeling desire. A degree of manipulation is involved, and the consumer is flattered into believing that his or her own free assessment of and choice between the options on offer will lead him or her to select the product the advertiser is seeking to sell. From the standpoint of the architect as a maker, the rising upsurge of digital design and fabrication could leave us mourning the loss of what has been a personal stomping ground, namely the intensity of the directly lived experiences of design and building. The direct, sensuous contact with drawings, models and materials is now being lost to a (digital) realm whose attributes refer to physical reality only remotely. Unlike (analogue) drawings and buildings, digital manipulations and prototypes do not exercise themselves in a real space, and are not subjected in the most rigorous way to spatial information. They denote in this sense a loss of immediacy and a withering of corporal thought. This flexible production of space and the consequent loss of immediate experience from the part of the designer will be analyzed within a theoretical framework underpinned mainly by the works of Walter Benjamin. Samples of digitally-produced objects will be used to illustrate this argument.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	sigradi2010_427
id	sigradi2010_427
authors	Miyasaka, Elza Luli; Pratschke Anja
year	2010
title	Yona Friedman: A produção de uma arquitetura baseada no processo de comunicação e no design de repertório [Yona Friedman: the production of an architecture based on the communication process of the design repertoire]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 427-429
summary	This article analyzes the design process of Yona Friedman. Friedman was a conceptual creator of mega - structures that were multiplied in several layers of cities in which users were responsible for choosing designs while being informed of the consequences. They used a computer containing the design options and described their way of life, which was translated into the use of environments. According to the spaces chosen from this list, the user could reconfigure the space. Although, considering that the city was an environment, the space could be selected while watching a computer simulation. Users’ choices depended on absolutely parameterized rules.
keywords	Yona Friedman, mega - structures, design process
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2010_052
id	caadria2010_052
authors	Okuda, S. and Z. Ou
year	2010
title	Bio-shell (biodegradable vacuum-formed modularised shelter)
doi	https://doi.org/10.52842/conf.caadria.2010.565
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 565-574
summary	This paper demonstrates how digitally fabricated vacuum-formed components can provide a new type of efficient construction applicable to architecture. Vacuum forming has the advantage of rapid mass-production capability of 3D curved forms. Recent digital fabrication technologies, such as 3D CAD and CNC machining, have dramatically reduced the cost and time for making the mould. In combination with biodegradable plastic, such as PLA (poly lactic acid) made of biopolymer, it could open up new type of sustainable construction system, which is applicable for temporal disaster housings or exhibition booths.
keywords	Digital fabrication; biodegradable; vacuum forming; fi nite element; lightweight structure
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ijac20108406
id	ijac20108406
authors	Tourre, Vincent; Francis Miguet
year	2010
title	Lighting Intention Materialization with a Light-Based Parametric Design Model
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 507
summary	How the inverse lighting methods could help the architectural design? We address this issue with an original light-based parametric design model dedicated to the architectural design. This model associates the parametric design approach with the lighting intentions expressed by the architects. It has been implemented thanks to an inverse lighting technique in a tool intended to aid the design of the windows and the shading devices in the early stages of architectural design. This model is used in a performative design approach onto the dome of the Louvre Abu Dhabi museum in order to define the transparency property of the dome.
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
doi	https://doi.org/10.52842/conf.caadria.2010.327
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2010_032
id	caadria2010_032
authors	Karakiewicz, Justyna and Thomas Kvan
year	2010
title	Diagrams as parametric systems in urban design: parametric systems applied to conceptual design
doi	https://doi.org/10.52842/conf.caadria.2010.337
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 337-346
summary	The paper describes how parametric systems have been used to help students bridge from conceptual design to descriptive results. Specifically, it describes projects set in two cities, Hong Kong and Melbourne, to address substantive urban design issues and illustrate that the approach is not scale or culturally bounded. The project undertaken in Hong Kong establishes interdependency models for dense urban structure and examined urban systems that contribute positively to their contextual setting. Parametric models were used to develop diagrams of site potential through models of air movement, light and sun exposure, in particular addressing air quality in one of the most polluted places in Hong Kong. The Melbourne case studies examine urban systems as self-organising systems. In these, the case studies identify parameters that determine two patterns: material pattern of the city and cognitive pattern of the city. The paper illustrates the use of a parametric system as a diagramming tool to explore urban propositions from an urban system.
keywords	Urbanism; systems thinking; parametric; diagrams
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2010_396
id	sigradi2010_396
authors	Leder, Solange Maria; Ruttkay Pereira Fernando Oscar; Claro Anderson
year	2010
title	Acessibilidade à luz natural no meio urbano [Accessibility to natural light in urban environments]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 396-398
summary	This study covers daylighting performance analysis of inner spaces in two different urban occupation configurations through computational simulation. The scenarios are based on an urban patch of Florianópolis city, with an area of 38,900 square meters. The scenarios were built by CityZoom computer code. The daylighting simulation analyses were performed by Apolux code. The daylighting availability in urban scenario was analyzed through the Preferable Sky Window parameter and obstruction mask. According to this work methodology, guidelines can be developed restricting building height and spacing in order to provide minimum standards of daylight availability.
keywords	daylight; daylighting; urban sustainability
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ascaad2010_231
id	ascaad2010_231
authors	Turrin, M.; R. Stouffs and S. Sariyildiz
year	2010
title	Parametric Design of the Vela Roof
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 231-240
summary	Due to the increased request for representative structures and for spaces to be used independent of the weather conditions, contemporary cities increasingly integrate public covered spaces (shadowed squares and streets, courtyards, historic commercial galleries, etc.) in the urban fibre. Facing the design of large roof structures for semi outdoor spaces is increasingly common for architects and engineers. When focusing on large roofs, aesthetics, structural performance and economics often dominate the design process. However, the current increased emphasis on energy-related aspects generates new challenges. Particularly, the use of renewable energy resources needs to be confronted. In this paper we will address the subject through a case study whose design aimed at integrating performance evaluations in the very early stages of the process. The case study focuses on the so-called “Vela roof”. This roof is part of a larger project currently under construction in Bologna (Italy). The focus of the study concerns the use of on-site renewable climate (energy) resources with special attention given passive reduction of summer overheating and daylight. For these tasks a parametric model was developed to support the decision making process and the paper will present its potential with respect to performance-oriented design during the conceptual design phase of roof structure. The very first conceptual design developed by the architectural office was assumed as a starting point for the inclusion of performance criteria. In the preliminary design of the roof uncomfortable conditions were expected under the whole roof in the summer. Various strategies for improving the thermal comfort were investigated, involving a large set of combined systems. Not all of these will be detailed in this paper. Instead we will focus on the ones directly affected by the geometry of the roof. Those are mainly air flow for cooling and the reduction of solar gain, in combination with their effects on daylight. Their investigation was based on a chain of dependencies to be integrated in the design process. With respect to that, parametric modelling was used. Parametric modelling allows both geometrical entities and their relationships to be represented. These relationships are structured in a hierarchical chain of dependencies, established during the preliminary parameterization process. The independent properties of the model are usually expressed through independent parameters, and their variations generate different configurations of the model. By making use of this potential, three project scales were parametrically explored. At the large scale, parametric variations of the overall shape of the roof were investigated in relation to cooling through ventilation and here the parametric model allowed for the generation of both different configurations of the roof, including its structural morphology and variations of its structural tessellation. At the medium scale, the integration of openable modules was investigated in relation to air extraction for cooling; with respect to this, the parametric model allows exploring openings based on variations of size and distribution. At the small scale, various options were explored for the cladding system, in order to reduce the direct solar gain while still allowing the income of indirect natural light. The parametric model was used to investigate the configuration of self-shading modules and their integration in the structure. Specific emphasis will be given to the small scale. The advantages in design process and the current limits of the parametric modelling approach used here will be discussed in the paper.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_063
id	ecaade2010_063
authors	Gourdoukis, Dimitris
year	2010
title	Protocol Growth: Development of adaptable city models through self-organization
doi	https://doi.org/10.52842/conf.ecaade.2010.605
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.605-614
summary	Protocol Growth attempts to approach the process of design in an alternative, bottom-up fashion, that is not based on master planning but instead on the development of a protocol that would allow infrastructure to ‘selforganize’, adapting at the same time to the conditions that it encounters. First, the concept of the protocol is explained and positioned in its historical context in order to better understand the needs that it satisfies. Then the characteristics of such an approach are illustrated through the example of a structure that aims to the development of a system that would allow for a settlement to face the rising of the water level because of global warming. The model proposed, instead of following a ‘long term’ plan adapts itself to the situation that it encounters and grows in height following an algorithm designed for that reason.
wos	WOS:000340629400065
keywords	City growth; Protocol; Self-organization; Computation; Cellular automata
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2010_343
id	sigradi2010_343
authors	Segre, Roberto;Leitão de Souza Thiago; José Barki
year	2010
title	A reconstrução de um olhar: modelagem tridimensional das antigas rotundas dos Panoramas do Rio de Janeiro [Rebuilding a look: three - dimensional modeling of Rio de Janeiro`s Panoramas roundabouts]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 343-346
summary	This article intends to highlight and analyze the main differences between visitors’ spacial experiences of the panoramas of the old rotundas in Rio de Janeiro, offering the possibility of “re - constructing” them digitally. To do this it is necessary to draw up three - dimensional digital models to search for a full understanding of its internal and external spatial systems based on the descriptions of visitors and the interpretation of prints and original drawings of panoramas by 19th century architects.
keywords	panoramas; digital panoramas; multimedia; 3D models; city history
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ecaade2010_049
id	ecaade2010_049
authors	Thompson, Emine Mine; Horne, Margaret
year	2010
title	3D-GIS Integration for Virtual NewcastleGateshead
doi	https://doi.org/10.52842/conf.ecaade.2010.767
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.767-775
summary	Tools and technologies are developing to help the simulation of our cities for visualization, analytical and information modeling purposes. In this paper the authors, as well as evaluating different applications for 3D GIS solutions, are investigating various stakeholder requirements in relation to the Virtual NewcastleGateshead (VNG) project. This case study shares findings of a working group set up specifically to explore the options for 3D-GIS integration for the VNG project, and will focus on issues relating to data exchange, CityGML, data accessibility and interoperability in piloting Autodesk LandXplorer.
wos	WOS:000340629400082
keywords	3D-GIS; Virtual NewcastleGateshead; 3D city models; LandXplorer; CityGML
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2010_177
id	ecaade2010_177
authors	Tuncer, Betuel; Sener, Sinan Mert
year	2010
title	Generation of a New Urban Block for the Future City: A bottom-up approach for the future city block
doi	https://doi.org/10.52842/conf.ecaade.2010.179
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.179-185
summary	Proposed research is realized as a plug-in with two alternatives, one that works with 3D Studio Max and the other that works through a link established between Excel and Catia. The purpose of the plug-in is to create a computational tool that generates unique urban block alternatives by mimicing the site’s built environment. The neccessity to create such a tool has stemmed from observations of physically un-harmonious neighbourhoods. This tool is claimed as the initial phase of a new urban tool that generates urban blocks that respond to their built environment and help establish harmonious neighborhoods.
wos	WOS:000340629400019
keywords	Urban design; Urban block; Bottom-up approach; Generative; Computation
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2010_229
id	ecaade2010_229
authors	Aschwanden, Gideon D. P. A.; Wullschleger, Tobias; Müller, Hanspeter; Schmitt, Gerhard
year	2010
title	Agent based Emission Evaluation of Traffic in Dynamic City Models
doi	https://doi.org/10.52842/conf.ecaade.2010.717
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.717-726
summary	We present a simulation platform to evaluate procedurally generated 3d city models with a set of agents representing urban street actors and pedestrians towards greenhouse gas emissions from transportation. Our aim is to give architects and urban planners an empiric tool to analyze, predict and quantify traffic fluctuations over time, and define the number of occupants, individual traffic and public transport in a city. In this project we show that the allocation of functions within a city is an important factor for the appearanceof traffic. The occupant’s decisions where they want to go are defined by the allocation of functions – and the distance defines the mode of transportation. We simulate the decision processes and gain information about the path, the mode of transportation, and the emissions they produce, and individual experiences like stress and effort. The autonomous driving cars are equipped with an acceleration based emission model allowing us to evaluate the inpact of jammed streets on the emission of cars.
wos	WOS:000340629400077
keywords	Urban planning; Multi-agent system; Generative city model; Occupant movement; Traffic emission
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2010_228
id	sigradi2010_228
authors	Stanton, Christian
year	2010
title	Digitally Mediated Use of Localized Material in Architecture
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 228-231
summary	Modern materialization of architecture depends on the use of regularized, highly processed remotely - sourced materials produced through a centralized, industrialized process. This involves energy use, increasing the environmental impact and cost of the final structure. This study investigates leveraging digital technology to capture near - site material geometry, providing design tools and processing the material on - site. Optimization techniques are applied to minimize the use and processing of materials while meeting design goals and engineering constraints. A simulation and prototype using digitally selected and cut trees as main bearing members in a structure is used to confirm the proposed process.
keywords	scanning, fabrication, natural material
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2010_005
id	caadria2010_005
authors	Anay, Hakan
year	2010
title	Computational aspects of a design process: Mario Botta’s single-family house in Breganzona
doi	https://doi.org/10.52842/conf.caadria.2010.049
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 49-58
summary	The present study aims to foreground and investigate computational aspects of the design process of Mario Botta’s single-family house in Breganzona. Through the selected case, it mainly addresses the research question, “what are the computational aspects of the examined design process and what is the nature of such aspects?” or, otherwise formulated, “what aspects of such a design process could be formalised, and thus, represented or explained in computational terms?” The study primarily involves analysis and investigation of the “material”; the sketches and the drawings produced during the design process and through this material, reinterpretation, and hypothetical reconstruction of the process. The material is taken as the container of design ideas / concepts and operations, and a formal / conceptual analysis is employed to foreground and extract this content.
keywords	Design process; design analysis; design computation; design knowledge
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2010_209
id	sigradi2010_209
authors	Aroztegui, Carmen
year	2010
title	Superficies adulteradas: el muro en línea y la representación fílmica [Adulterated surfaces: the online wall and conematic representation]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 209-212
summary	Online communities use a “wall” as a place to articulate non - synchronic communication among its members. Such a place, however, poorly explores the metaphor of the wall as a means of enhancing online experiences. Online “walls” do not explore or challenge the richness of a real wall, and they do not embrace new experiences that are only possible in the digital world. In order to tackle these issues, this paper analyzes three movie scenes where the everyday perception of the wall is altered by madness and estrangement. Finally, the paper suggests how these perceptions of the wall could be integrated into interfaces using touch screen technologies.
keywords	online, wall, metaphor, film, representation
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: