Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 447

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2010_412
id	sigradi2010_412
authors	Weston, Mark
year	2010
title	Memory Mesh: Conformationally Adaptive Solar Shading
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 412-414
summary	Innovative technologies that enable more efficient use of energy in the built environment contribute to the effectiveness of green building design, and to sustainable building practices. Digital fabrication can be used to unlock the inherent physical properties of common materials as a means to create solar shades which change shape in response to ambient conditions and user needs in a system which relies on extremely simple mechanical actuation. These conformationally adaptive solar shades take advantage of materials which can be deformed not only to occlude or permit the passage of light, but also to produce optimal angles for the maximization the interception of solar radiation of the surface of the device itself.
keywords	solar shading, materiality, sustainability, biomimicry, anisotropy
series	SIGRADI
email
last changed	2016/03/10 10:03

_id	ecaade2010_079
id	ecaade2010_079
authors	Wissen Hayek, Ulrike; Neuenschwander, Noemi; Halatsch, Jan; Gre_t-Regamey, Adrienne
year	2010
title	Procedural Modeling of Urban Green Space Pattern Designs Taking into Account Ecological Parameters
doi	https://doi.org/10.52842/conf.ecaade.2010.339
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.339-347
summary	Cities all over the world are challenged by increasing the quality of life of urban citizens in order to ensure sustainable urban development. However, a lot of policies and planning fail in integrating environmental aspects in a way that makes them applicable for design leading to rather unsustainable developments. This paper presents an approach to integrate ecological parameters into urban design using a procedural, shape grammar driven modeling and visualization system. Design specifications and ecological goals given in the Masterplan of MASDAR City derived as an application example for the workflow. We used the concept of ecosystem services to break down the ecological process knowledge to design rules and meaningful, quantifiable spatial indicators. Our results demonstrate the application of the proposed approach covering different planning scales (district and building level). The integrated model suits as an assessment tool that can be used to test urban design alternatives on the ecological functioning as a starting point for architects.
wos	WOS:000340629400036
keywords	City modeling; Shape grammar; Ecological indicators; Urban ecosystem services; Sustainable urban patterns
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	sigradi2010_384
id	sigradi2010_384
authors	García, Alvarado Rodrigo; Turkienicz Benamy
year	2010
title	Generative House: Exploration of Digital Fabrication and Generative System for Low - cost Housing in Southern Brazil
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 384-387
summary	Generative House is a collaborative exploration of advanced technologies for lower - and working - class housing carried out by industrial and academic partners in southern Brazil. It seeks to test generative procedures and digital manufacturing to develop a flexible building system for low - cost sustainable housing in order to inspire future developments in this field by developing an urban grammar through manufacturing models and generative programming, as well as parametric design of panels assembled using digital fabrication. Scale models and full - scale prototype with timber boards have been built, demonstrating the feasibility of the approach proposed. However, further refinement of the adopted procedures and technical applications is required.
keywords	low - cost housing, generative programming, parametric design, digital manufacturing, collaborative development
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2010_166
id	ecaade2010_166
authors	Geyer, Philipp; Buchholz, Martin
year	2010
title	System-Embedded Building Design and Modeling: Parametric systems modeling of buildings and their environment for performance-based and strategic design
doi	https://doi.org/10.52842/conf.ecaade.2010.641
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.641-650
summary	The paper proposes Parametric Systems Modeling (PSM) as a tool for building and city planning. The outlined method is based on the Systems Modeling Language (SysML) and is intended for design, dimensioning, and optimization of buildings and cities as systems. The approach exceeds the geometric approach, considers additional information from physics, technology, as well as biology, and provides a basis for multidisciplinary analyses and simulations. Its application aims at the exploration of innovative sustainable design solutions at system level. The proposal of an innovative buildinggreenhouse-city system serves to illustrate the approach. Features of this system are closed water cycles, renewable energy use, thermo-chemical energy storage and transport of energy for heating and cooling purposes on the base of desiccants, as well as recycling of CO2 , accumulation of biomass and related soil improvement.
wos	WOS:000340629400069
keywords	Parametric systems modeling; Systems design and engineering; Sustainable city system; City-integrated greenhouse
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2010_021
id	ecaade2010_021
authors	Gil, Jorge; Beirao, Jose; Montenegro, Nuno; Duarte, Jose
year	2010
title	Assessing Computational Tools for Urban Design: Towards a “city information model”
doi	https://doi.org/10.52842/conf.ecaade.2010.361
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.361-369
summary	This paper presents an assessment of a selection software tools for urban design confronting their capabilities with the goals of the CityInduction research project. The goal of this paper is the assessment of existing platforms for computer aided urban design to select one as the basis for implementing the urban design model proposed in the CityInduction project. This model includes three sub-models that support the formulation of design programs from contextual information, the exploration of designs solutions through a grammarbased generative approach, and the validation of designs against the program through the use of evaluation tools. To each of these sub-models corresponds a module in the envisioned platform and so, existing platforms are assessed in terms of their ability to support the implementation of each module. The current goal is a proof-of-concept implementation, but the final goal is the development of a complete platform for supporting urban design.
wos	WOS:000340629400038
keywords	Software review; Sustainable urban design; GIS; CAAD; BIM
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ascaad2010_109
id	ascaad2010_109
authors	Hamadah, Qutaibah
year	2010
title	A Computational Medium for the Conceptual Design of Mix-Use Projects
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 109-116
summary	Mix use development is receiving wide attention for its unique sustainable benefits. Nevertheless, the planning and designing of successful mixed use projects in today's environment is a complex matrix of skill sets and necessary collaborations between various stakeholders and design professionals. From a design point of view, architects are required to manage and coordinate large information sets, which are many time at odds with one another. The expansive space of knowledge and information is at its best vague and substantially ill-structured. A situation that continues to overburden architects mental and intellectual ability to understand, address and communicate the design issue. In the face of this complex condition, designers are gravitating towards information modeling to manage and organize the expansive data. However, is becoming increasingly evident that current building information modeling applications are less suited for early design activity due to their interrupted and rigid workflows. Against this background, this paper presents a theoretical framework for a computational medium to support the designer during early phases of exploring and investigating design alternatives for mix-use projects. The focus is on the conjecture between programming and conceptual design phase; when uncertainty and ambiguity as at its maximum, and the absence of computational support continues to be the norm. It must be noted however, the aim of the medium is not to formulate or automate design answers. Rather, to support designers by augmenting and enhancing their ability to interpret, understand, and communicate the diverse and multi-faceted design issue. In literature on interpretation, Hans-Georg Gadamer explains that understanding is contingent on an act of construction. To understand something is to construct it. In light of this explanation. To help designers understand the design issue, is to help them construct it. To this end, the computational medium discussed in this paper is conceived to model (construct) the mix-use architectural program. In effect, turning it into a dynamic and interactive information model in the form of a graph (network). This is an important development because it will enable an entirely new level of interaction between the designer and the design-problem. It will allow the designer to gather, view, query and repurpose the information in novel ways. It will offer the designer a new context to foster knowledge and understanding about the ill-structured and vague design issue. Additionally, the medium would serve well to communicate and share knowledge between the various stakeholders and design professionals. Central to the discussion are two questions: First, how can architects model the design program using a graph? Second, what is the nature of the proposed computational medium; namely, its components and defining properties?
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_065
id	ecaade2010_065
authors	Hardy, Steve(n); Lundberg, Jonas
year	2010
title	Environmental Catalysts for a Computational Urbanism
doi	https://doi.org/10.52842/conf.ecaade.2010.805
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.805-814
summary	It is perhaps no longer relevant to discuss digital tools purely as means in themselves; the growth of abstract systems or computational patterns for their own sake simply strain justification in light of real-world concerns such as climate change and economic crises. While growing concerns over climate change have necessitated an increased interest in sustainable urbanism and design, sustainability has done little to yet alter the morphological and typological consequences of architectural space (Hardy, 2008). In a series of overlapping research projects and design studio briefs, students, research assistants and we worked with the iterative and variable processes of Rhinoscript, McNeel’s Grasshopper and Bentley’s Generative Components to explore the possibilities of changing environmental extremes (specifically flooding) as catalysts for providing new urban morphologies and spatial organizations. Working between the master plan and the individual housing unit, we investigated arrays of terrace homes in the London Thames Valley flood zones while simultaneously exploring the potential for computational generation and parametric optimization.
wos	WOS:000340629400086
keywords	Computational urbanism; Formative strategies; Parametric design; Adaptive vs. mitagative; Environmental formations
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2010_096
id	ecaade2010_096
authors	Juvancic, Matevz; Verovsek, Spela; Jutraz, Anja; Zupancic, Tadeja
year	2010
title	Developing Shared Urban Visions Through Participation Supported by Digital Tools
doi	https://doi.org/10.52842/conf.ecaade.2010.667
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.667-676
summary	The authors base their efforts on the assumption that future cities will only be called ‘advanced’ and ‘sustainable’ if they evolve as a shared vision between the city users / dwellers (general public) and urban designers, planners, architects, engineers (experts). For visions to be shared and planning processes to be inclusive the involvement of all (urban) actors is paramount. With the increasing urban complexity and the interrelation of phenomena there is also an increasing demand for updated, advanced and re-thought digital tools that could help in forming and enabling such common urban visions. The paper outlines the agenda and connects our on-going research efforts with the fields deemed most crucial for inclusive-for-all, successful participation that can lead to shared visions of future cities. Standing out in interchangeable order and never-ending cyclic process are: (1) education, (2) communication and (3) collaboration.
wos	WOS:000340629400072
keywords	Urban design; Education; Visual communication; Collaboration; Digital tools
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_090
id	ecaade2010_090
authors	Ladouce, Nicolas; Hee, Limin; Janssen, Patrick T.
year	2010
title	Urban Space Planning for Sustainable High Density Environment
doi	https://doi.org/10.52842/conf.ecaade.2010.777
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.777-785
summary	In this paper we investigate the possibilities of new typologies of urban public space for high density environments. The premise for the project would be that with new high-density typologies, it would be necessary to consider a difference in the nature of urban public spaces rather than a difference in degree from the status quo. From observations of urban patterns that drive collective, hybrid spaces around Asia, relationships between urban attributes are drawn. For this paper we shall focus on the particular case of Linked Hybrid, Beijing, China, as an elevated urban public space. A literature review focuses on reviewing key theories to construct and adopt a rating system to develop an empirical framework to evaluate the case studies and extract the key attributes. These rated attributes are then abstracted in a real-time model that enables user manipulation. The purpose is to create a tool to better observe the effects and evolution of planning decisions for future urban spaces in high density contexts. The preliminary results are consistent with the idea that selected spatial parameters of a space may be embedded into a “barcode” and referenced as a type. The combination of different types, hence their parameters may be used for effective replication of their characteristics to improve the decision-making process for urban designers. The research is not intended to reproduce the successful urban public spaces but rather result in a catalogue of typologies which can be referred to during the initial stages of planning to provide an indication of spatial qualities.
wos	WOS:000340629400083
keywords	High density environments; Collective urban space; Hybrid typologies; Parametric urbanism
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_056
id	ecaade2010_056
authors	Oezener, Ozan Oender; Farias, Francisco; Haliburton, James; Clayton, Mark J.
year	2010
title	Illuminating the Design: Incorporation of natural lighting analyses in the design studio using BIM
doi	https://doi.org/10.52842/conf.ecaade.2010.493
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.493-498
summary	The growing demand for sustainable architectural design motivates the integration of BIM technologies and novel design processes into architectural education. This paper presents the results from a set of educational case studies for the incorporation of BIM-based daylighting simulations and analyses into the design studio. With a carefully devised studio setting and the participation of interdisciplinary consultants, the experimental case studies simulated an integrated design process based on rapid information exchange and collaborative decision making. The implemented method enables students to use BIM models and daylighting simulations as significant sources of design information for performance-based architectural design.
wos	WOS:000340629400053
keywords	BIM; daylighting simulations; Collaborative design; Integration
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2010_052
id	caadria2010_052
authors	Okuda, S. and Z. Ou
year	2010
title	Bio-shell (biodegradable vacuum-formed modularised shelter)
doi	https://doi.org/10.52842/conf.caadria.2010.565
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 565-574
summary	This paper demonstrates how digitally fabricated vacuum-formed components can provide a new type of efficient construction applicable to architecture. Vacuum forming has the advantage of rapid mass-production capability of 3D curved forms. Recent digital fabrication technologies, such as 3D CAD and CNC machining, have dramatically reduced the cost and time for making the mould. In combination with biodegradable plastic, such as PLA (poly lactic acid) made of biopolymer, it could open up new type of sustainable construction system, which is applicable for temporal disaster housings or exhibition booths.
keywords	Digital fabrication; biodegradable; vacuum forming; fi nite element; lightweight structure
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ijac20108303
id	ijac20108303
authors	Rafael, Urquiza S.
year	2010
title	Parametric Performative Systems: Designing a Bioclimatic Responsive Skin
source	International Journal of Architectural Computing vol. 8 - no. 3, pp. 279-300
summary	This paper assumes the façade as an innovative element of interaction between the inside and the outside: the architectural skin. As in nature, one of its most significant functions is the energy exchange with the environment. Similarly, efficiency increases by passive and active responses to climate conditions and site orientation. This research explores the potential of parametric techniques, programming and digital manufacturing, to design and build a Bioclimatic Responsive Skin (BRS). Firstly, we designed a bio-component applicable to any surface due to its parametric nature. Secondly, we fabricated two non-reactive working prototypes to study the manufacturing and construction details. Thirdly, we integrated the physical and the digital interfaces by using Generative Components™, Arduino, and Ubimash to generate a kinetic responsive model. This prototype was presented at SmartGeometry Workshop and Conference 2010. Finally, Lem3a architecture used this BRS in a real design project for a Sustainable house in New Hope, PA.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_149
id	ecaade2010_149
authors	Salim, Flora Dilys; Burry, Jane; Taniar, David; Lee, Vincent Cheong; Burrow, Andrew
year	2010
title	The Digital Emerging and Converging Bits of Urbanism: Crowddesigning a live knowledge network for sustainable urban living
doi	https://doi.org/10.52842/conf.ecaade.2010.883
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.883-891
summary	Data is ubiquitous in our cities. However, designing a knowledge network about our cities is an arduous task, given that data sensed cannot be used directly, human significance must be added. Adding human significance can be achieved via an automated “expert system (ES)” in which domain expert knowledge are stored in a knowledge-based repository. The domain expert knowledge is matched with the corresponding data to derive specific inference which can aid decision making for urban stakeholders.This requires amalgamation of various interdisciplinary techniques. This paper presents a survey of existing technologies in order to investigate the emerging issues surrounding the design of a live knowledge network for sustainable urban living. The maps and models of the existing infrastructure of our cities that include a wealth of information such as topography, layout, zoning, land use, transportation networks, public facilities, and resource network grids need to be integrated with real-time spatiotemporal information about the city. Public data in forms of archives and data streams as well as online data from the social network and the Web can be analyzed using data mining techniques. The domain experts need to interpret the results of data mining into knowledge that will augment the existing knowledge base and models of our cities. In addition to the analysis of archived and streamed data sources from the built environment, the emerging state-of-the-art Web 2.0 and mobile technologies are presented as the potential techniques to crowddesign a live urban knowledge network. Data modeling, data mining, crowdsourcing, and social intervention techniques are reviewed in this paper with examples from the related work and our own experiments.
wos	WOS:000340629400094
keywords	Crowdsourcing; Knowledge discovery; Mobile and ubiquitous computing; Urban modeling; Spatial interaction; Social networking; Web 2.0
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2010_110
id	ecaade2010_110
authors	Santo, Yasu; Frazer, John Hamilton; Drogemuller, Robin
year	2010
title	Co-Adaptive Environments: Investigation into computer and network enhanced adaptable, sustainable and participatory environments
doi	https://doi.org/10.52842/conf.ecaade.2010.677
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.677-686
summary	This paper presents research in response to environmental concerns we face today. In a search for a better method to manage spaces and building resources consumed excessively through traditional top-down architectural solutions, the research began by speculating that the building spaces and resources can be managed by designing architectural systems that encourage a bottom-up approach. In other words, this research investigates how to design systems that encourage occupants and users of buildings to actively understand, manage and customise their own spaces. Specific attention is paid to the participation of building users because no matter how sophisticated the system is, the building will become as wasteful as conventional buildings if users cannot, or do not want to, utilise the system effectively. The research is still in its early stages. The intension of this paper is to provide a background to the issue, discuss researches and projects relevant to, but not necessarily about, architecture, and introduce a number of hypothesis and investigations to realise adaptable, participatory and sustainable environments for users.
wos	WOS:000340629400073
keywords	Adaptive; Interactive; Participatory; Tangible; Ubiquitous
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2010_099
id	caadria2010_099
authors	Sass, Lawrence
year	2010
title	Invited commentary - The next revolution: digital building kits: materialising designs with digital fabrication
doi	https://doi.org/10.52842/conf.caadria.2010.545
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 545-553
summary	Novice designers are gaining increased access to CAD tools for design computing and digital fabrication that were once exclusively used by expert designers. As evidenced by the rise in manufacturing incubation facilities, novices can prototype their ideas in ways similar to expert designers. Also available for novice designers are online rendering consultants, online manufacturing and online ecommerce as a way to distribute and sell products. Discussed here are the reasons for this emergence, complications when using design and digital fabrication as a standard mode of production and new focus for experts.
keywords	Digital fabrication; sustainable design
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ascaad2010_171
id	ascaad2010_171
authors	Schimek, H.; A. Meisel and T. Bogenperger
year	2010
title	On Connecting Panels of Freeform Building Envelopes
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 171-178
summary	As smooth geometric shapes are very tricky to manufacture with an overall great expense this paper presents a parametrical approach how to control the joint geometry within a framework of flat panels which approximate a freeform surface using discretization. Since timber has an excellent reputation as a sustainable and regenerative material plus the fact that timber can be perfectly processed with a large variety of tools including CNC milling machines we are using cross laminated timber boards (CLT) with large and heavy members. Hence that means dealing with high forces which require geometrically exact and often complex joints, which we want to push to a high degree of automation in the design process. We establish rules and constraints between all neighboring CLT-panels. That way we control a new connector system specially designed for non-standard CLT-joints. This paper documents the status of one aspect of an ongoing research project and will also give a preview to upcoming tasks including the production of a prototype structure.
series	ASCAAD
type	normal paper
email
last changed	2011/03/01 07:46

_id	ecaade2010_000
id	ecaade2010_000
authors	Schmitt, Gerhard; Hovestadt, Ludger; Van Gool, Luc; Bosché, Frédéric; Burkhard, Remo; Colemann, Suzanne; Halatsch, Jan; Hansmeyer, Michael; Konsorski-Lang, Silke; Kunze, Antje; Sehmi-Luck, Martina (eds.)
year	2010
title	FUTURE CITIES
doi	https://doi.org/10.52842/conf.ecaade.2010
source	28th eCAADe Conference Proceedings [ISBN 978-0-9541183-7-2], ETH Zurich (Switzerland) 15-18 September 2010, 904 p.
summary	Future Cities – the title of the 2010 eCAADe Conference describes one of the major challenges of the 21st century. The conference theme is a logical evolution from previous years in that it expands the focus of interest from the building to larger scales and higher complexity. The conference contributions describe methods and instruments that were developed in the last three decades and apply them to city and territorial planning. The eCAADe proceedings demonstrate that CAAD research and education of the past prepared the ground for the future and for the increased responsibility of the CAAD community. The population of cities has developed worldwide from a minority to the majority. Cities are the largest, most complex and most dynamic man-made systems. As vibrant centres of cultural life and of mega events, they are engines that drive local and global economies. However, their growth was in the fewest cases determined by sustainability goals. As a result, contemporary metropolitan territories are often environmentally, socially and economically unsustainable entities placing increasing pressure on the surrounding rural areas. No longer do traditional methods support the planning and managing of large cities – these methods have reached their limits. Parallel to the revolution in the design of buildings, we need a radical re-thinking of the planning, design, development and management process of cities and urban-rural systems. Compared to buildings, urban and rural systems involve a much higher number of stakeholders and decision makers. We need to study and simulate the effects and side effects of urban-rural planning or re-development much earlier in the process than normally done today. The goal seems clear: the transformation of existing and the planning of new sustainable urban-rural systems. As ordering principles we can build on experiences with building architecture. Complexity, dynamics, scale, and the urban metabolism evolve as promising research and education areas.
series	eCAADe
email
last changed	2022/06/07 07:49

For more results click below: