Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 362

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_039
id	ascaad2010_039
authors	Almusharaf, Ayman M.; Mahjoub Elnimeiri
year	2010
title	A Performance-Based Design Approach for Early Tall Building Form Development
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 39-50
summary	This paper presents a methodological interactive design approach within which structure is integrated into tall building form development. The approach establishes a synergy between generative and analytical tools to allow for parallel interaction of the formal and structural design considerations during the conceptual design phase. An integration of the associative modeling system, Grasshopper, and the structural analysis tool, ETABS was established, and a bi-directional feedback link between the two tools was initiated to guide the iterative from generation process. A design scenario is presented in this paper to demonstrate how the parametric generation and alteration of architectural form can be carried out based on instant feedback on the structural performance. Utilizing such a tool, architects can not only develop improved understanding of structural needs, but also realize their formal ideas structurally and materially.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2010_213
id	ascaad2010_213
authors	Babsail, Mohammad; Mahjoub Elnimeiri
year	2010
title	A Computer Process for Investigating Wind Power Production in Building Integrated Wind Turbines
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 213-220
summary	This paper reports on the computer process to be used in an ongoing research to investigate the effect of architectural parameters of tall buildings on the incorporation of wind turbines. The process combines a generative modeling tool (Grasshopper) and a performance based CFD tool (Virtualwind). The process is demonstrated on three typical tall building plan configurations. The wind speed was simulated at certain locations to demonstrate the ability of tall buildings to enhance the wind speed and thus maximize the energy produced by wind turbines located between twin towers. The process to predict wind power production is lastly listed.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia22_128
id	acadia22_128
authors	Azel, Nicolas; Pachuca, Brandon; Wilson, Lucien
year	2022
title	Closing the Gap
source	ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 128-137.
summary	This paper shares KPF Cloud Tools, a platform for using Rhino Compute (McNeel’s REST API for RhinoCommon and Grasshopper) to run a library of Grasshopper tools through a cloud server via a Rhino plugin with a procedurally generated user interface, making it quick to deploy new tools (Robert McNeel & Associates 2010). We describe the professional challenges that the KPF Cloud Tools platform solves, document the technical implementation of the platform, and illustrate its benefit through the impact on a large architectural practice.
series	ACADIA
type	paper
email
last changed	2024/02/06 14:00

_id	ecaade2010_065
id	ecaade2010_065
authors	Hardy, Steve(n); Lundberg, Jonas
year	2010
title	Environmental Catalysts for a Computational Urbanism
doi	https://doi.org/10.52842/conf.ecaade.2010.805
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.805-814
summary	It is perhaps no longer relevant to discuss digital tools purely as means in themselves; the growth of abstract systems or computational patterns for their own sake simply strain justification in light of real-world concerns such as climate change and economic crises. While growing concerns over climate change have necessitated an increased interest in sustainable urbanism and design, sustainability has done little to yet alter the morphological and typological consequences of architectural space (Hardy, 2008). In a series of overlapping research projects and design studio briefs, students, research assistants and we worked with the iterative and variable processes of Rhinoscript, McNeel’s Grasshopper and Bentley’s Generative Components to explore the possibilities of changing environmental extremes (specifically flooding) as catalysts for providing new urban morphologies and spatial organizations. Working between the master plan and the individual housing unit, we investigated arrays of terrace homes in the London Thames Valley flood zones while simultaneously exploring the potential for computational generation and parametric optimization.
wos	WOS:000340629400086
keywords	Computational urbanism; Formative strategies; Parametric design; Adaptive vs. mitagative; Environmental formations
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2010_222
id	ecaade2010_222
authors	Matcha, Heike; Ljubas, Ante
year	2010
title	Parametric Origami: Adaptable temporary buildings
doi	https://doi.org/10.52842/conf.ecaade.2010.243
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.243-251
summary	We employ the possibilities of parametric modeling software andcustomized mass production machinery to develop a design for adaptablemultifunctional temporary medium size buildings made from recyclable lightweight materials and built a prototype from cardboard. We developed agrasshopper script that controls the geometry of a self-supporting arc made from a folded plane. The project is conducted as an experimental design-and-build university course that familiarizes students with parametric thinking and designing and with carrying out a project from initial concepts through tobuilding a 1:1 prototype. This project is part of an ongoing series of investigative design & build courses integrating current design possibilities and construction methods.
wos	WOS:000340629400026
keywords	Parametric design; Grasshopper script; Temporary low-cost buildings; Student design build projects; CAAM methods
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2010_236
id	sigradi2010_236
authors	Vincent, Charles C; Sampaio Nardelli Eduardo; Nardin Lia Raquel
year	2010
title	Parametrics in Mass Customization
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 236-239
summary	The imminent disruption of the modern paradigms of serialization, repetition and standardization, poses us a myriad of new questions regarding both the emerging aesthetics and the upcoming production means for a new architecture. Despite the canonic approach in which architects tend to invest, the public and private demand for mass housing production is increasing at an astonishing rate, requiring architects to rethink traditional— modern—strategies and to gain control over contemporary—digital—tools. This paper describes an academic research project focused on the implementation of such tools. Some related work is presented, emphasizing some of the approaches in parametric plan layout generation. And a case study is formulated in which the mass design of serially customized layouts is prepared to be solved through a beta plugin for Rhino – Grasshopper.
keywords	mass customization, facade, digital architecture, aesthetics, production means
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	acadia10_313
id	acadia10_313
authors	Banda, Pablo
year	2010
title	Parametric Propagation of Acoustical Absorbers
doi	https://doi.org/10.52842/conf.acadia.2010.313
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 313-319
summary	The following paper deals with a performance-driven morphogenetic design task to improve the conditions of room acoustics, using as a case study the material laboratory of the School of Architecture at Federico Santa Maria University of Technology. Combining contemporary Parametric Modeling techniques and a Performance- Based approach, an automatic generative system was produced. This system generated a modular acoustic ceiling based on Helmholtz Resonators. To satisfy sound absorption requirements, acoustic knowledge was embedded within the system. It iterates through a series of design sub-tasks from Acoustic Simulation to Digital Fabrication, searching for a suitable design solution. The internal algorithmic complexity of the design process has been explored through this case study. Although it is focused on an acoustic component, the proposed design methodology can influence other experiences in Parametric Design.
keywords	Parametric Modeling, Sound Absorption & Acoustic Knowledge, Performance-Based Design, Design Task, Scripting, Digital Fabrication, Custom Tools, Honeycomb.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2010_272
id	sigradi2010_272
authors	Banda, Pablo
year	2010
title	Absorbente de panal de abejas: explorando la adición de performance en sistemas de modelado paramétrico [Absorbing honeycomb: exploring performance addition in parametric modeling systems]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 272-275
summary	This paper analyzes the characteristics of the development of generative systems, originated by embedding knowledge of sound absorption within a parametric design system and implementing Helmholtz Resonators for the decrement of low frequencies of sound. The encounter between physically - related knowledge and explicit geometric processes is observed by focusing on contemporary author skills and design postures to outline methodological traces for a performance - based approach to parametric design.
keywords	parametric modeling, performance - based design, digital fabrication, scripting, custom tools
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2010_233
id	ecaade2010_233
authors	Guerbuez, Esra; Cagdas, Guelen; Alacam, Sema
year	2010
title	A Generative Design Model for Gaziantep’s Traditional Pattern
doi	https://doi.org/10.52842/conf.ecaade.2010.841
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.841-849
summary	This paper describes a research to develop new urban designalternatives for Gaziantep by using fractal based approaches. The aim of the research is not only generating new form alternatives but also considering the continuity of traditional architectural and urban pattern which faces deterioration. Within this study, it is intended to test the applicability of the fractal based generative approaches and explore the potential advantages. The method called CADaFED (Ediz, 2003) is updated to be used in one of the 3d modeling programs, 3DsMax scripting and it is used as an experimental tool in two-day student workshop. The working field is limited as Bey Neighbourhood in Gaziantep for its well-preserved architectural characteristics. In this paper, the outcomes of the student workshop will be evaluated and discussed in the sense of affirmative effects of fractal based design approaches.
wos	WOS:000340629400090
keywords	Generative design; Fractal based design; Computational architectural design; Traditional pattern
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2010_017
id	caadria2010_017
authors	Hao, Hua and Ting-Li Jia
year	2010
title	Floating bubbles: an agent-based system for layout planning
doi	https://doi.org/10.52842/conf.caadria.2010.175
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 175-183
summary	This program converts bubble diagram into an agent-based system for architectural design. The program suggests a model for layout planning based on bubble diagram which explicitly describes the adjacency requirements in architecture. Generally there is a basic set of rules for every agent dealing with adjacency topology and also an alternative set for other objectives. Then this basic program is developed into several generative tools for different design tasks. They imply that the agent-based system is efficient for elementary spatial arrangement and it could generate a wide range of complex solutions.
keywords	Agent-based modeling; layout planning; bubble diagram
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia17_512
id	acadia17_512
authors	Rossi, Andrea; Tessmann, Oliver
year	2017
title	Collaborative Assembly of Digital Materials
doi	https://doi.org/10.52842/conf.acadia.2017.512
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 512- 521
summary	Current developments in design-to-production workflows aim to allow architects to quickly prototype designs that result from advanced design processes while also embedding the constraints imposed by selected fabrication equipment. However, the enduring physical separation between design space and fabrication space, together with a continuous approach to both design, via NURBs modeling software, and fabrication, through irreversible material processing methods, limit the possibilities to extend the advantages of a “digital” approach (Ward 2010), such as full editability and reversibility, to physical realizations. In response to such issues, this paper proposes a processto allow the concurrent design and fabrication of discrete structures in a collaborative process between human designer and a 6-axis robotic arm. This requires the development of design and materialization procedures for discrete aggregations, including the modeling of assembly constraints, as well as the establishment of a communication platform between human and machine actors. This intends to offer methods to increase the accessibility of discrete design methodologies, as well as to hint at possibilities for overcoming the division between design and manufacturing (Carpo 2011; Bard et al. 2014), thus allowing intuitive design decisions to be integrated directly within assembly processes (Johns 2014).
keywords	material and construction; construction/robotics; smart assembly/construction; generative system
series	ACADIA
email
last changed	2022/06/07 07:56

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia10_000
id	acadia10_000
authors	Sprecher, Aaron; Yeshayahu, Shai and Lorenzo-Eiroa, Pablo (eds.)
year	2010
title	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture
doi	https://doi.org/10.52842/conf.acadia.2010
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), 411 p.
summary	The ACADIA 2010 conference will focus on the changing nature of information and its impact on architectural education, research and practice. With the ever-increasing integration of information technologies in the design laboratory, the discipline of architecture has changed profoundly in recent years. The emerging fields of digital fabrication, generative and evolutionary modeling among others, are now at the core of investigations in a growing community of digital design practitioners and researchers. ACADIA 2010 will explore the ways designers, architects, engineers and scientists collect, analyze and assemble information through computational systems that redefine the notions of design performance and optimization, evolutionary and responsive models. These notions are today inherently related to the possibilities and limitations offered by our increasing computational capabilities, and the way information shapes relations between the human, the environment, and the machine. ACADIA 2010 will gather leading practitioners, theorists, and researchers who will examine the relation that architecture has with technology and information, and how the latter propels today’s most innovative design experimentations and research. The conference will be centered on a series of peer-reviewed paper sessions and a groundbreaking exhibition including peer-reviewed projects.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	acadia10_97
id	acadia10_97
authors	Tang, Ming; Anderson, Jonathon
year	2010
title	Mathematically Driven Forms and Digital Tectonic: A formula for realizing the digital
doi	https://doi.org/10.52842/conf.acadia.2010.097
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 97-102
summary	Mathematics has been the interest of architects for hundreds of years and has been used in projects ranging from the Denmark Pavilion at Expo 2010 to Gaudi’s cathedral. Generative form finding frequently takes the inspiration of the geometric aesthetic found in mathematic forms. Today, the influence of digital computation technology is increasingly evident in architectural form seeking and analysis as they relate to mathematics. The sculptural possibilities of math forms have reconditioned the design process that establishes new modeling and tectonic approaches. This paper focuses on the study of current constraints and new procedures within mathematical approaches to architecture. Furthermore, this paper describes three experimental projects exploring mathematically driven designs and their potential within architectural vocabulary. In these experiments, the designers and students explored the manipulation of a planar surface through algorithmic equations and the molecular make-up of a surface through voxel representation.
keywords	mathematical, digital fabrication, generative form finding, tectonic approaches, digital design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2010_078
id	ecaade2010_078
authors	Chiu, Yun-Ying
year	2010
title	How To Make The Soft Skin?: A preliminary framework for the parametric design of the bionic soft skin
doi	https://doi.org/10.52842/conf.ecaade.2010.237
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.237-242
summary	This paper is a presentation of the preliminary framework for the design and fabrication of the soft-skin. Today, the digital technology applied in the architecture field is everywhere. However, there are still lots of fantastic free form architecture uncompleted and remained on the paper architecture or only the digital visual simulated model. Until now, most of the finished free form cases are consisted of the skin and bones, or only the bones. The complete soft-skin cases without the bones are fewer and the process remains untold. Based on the parametric environments and biology, how might you design a free form without the bones? How could you make the soft skin stand up? The research starts a series of exploration of the design and fabrication for the soft skin, and seeks to propose the preliminary framework as a helpful reference for the designers who deal with the soft skin project.
wos	WOS:000340629400025
keywords	Soft skin; Bionic architecture; Parametric design; Grasshopper
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_397
id	ecaadesigradi2019_397
authors	Cristie, Verina and Joyce, Sam Conrad
year	2019
title	'GHShot': a collaborative and distributed visual version control for Grasshopper parametric programming
doi	https://doi.org/10.52842/conf.ecaade.2019.3.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	When working with parametric models, architects typically focus on using rather structuring them (Woodbury, 2010). As a result, increasing design complexity typically means a convoluted parametric model, amplifying known problems: 'hard to understand, modify, share and reuse' (Smith 2007; Davis 2011). This practice is in contrast with conventional software-programming where programmers are known to meticulously document and structure their code with versioning tool. In this paper, we argue that versioning tools could help to manage parametric modelling complexity, as it has been showing with software counterparts. Four key features of version control: committing, differentiating, branching, and merging, and how they could be implemented in a parametric design practice are discussed. Initial user test sessions with 5 student designers using GHShot Grasshopper version control plugin (Cristie and Joyce 2018, 2017) revealed that the plugin is useful to record and overview design progression, share model, and provide a fallback mechanism.
keywords	Version Control; Parametric Design; Collaborative Design; Design Exploration
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	sigradi2010_213
id	sigradi2010_213
authors	Herrera, Pablo C.
year	2010
title	Tecnologías disruptivas: programación y fabricación en Latinoamérica [Disruptive technologies: programming and digital fabrication in Latin America]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 213-216
summary	Since 2008 the preference for using different programming methods (Rhinoscript) had been analyzed using blogs. Searching for answers to explain the negative tendency of this year (from 48,063 to 16,332), a second repository was created (Grasshopper) featuring interactive methods and techniques. It has been discovered that of the five geographic regions analyzed Latin America is the only one that preferred the interactive interface (18% over programming). This shows that we are still keeping a strong dependency on the use of stable and safe technologies over disruptive ones that proved to be more efficient in design and fabrication.
keywords	digital fabrication, scripting, architectural education, rhinoscripting, grasshopper
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2012_235
id	sigradi2012_235
authors	Polo, Pablo Herrera
year	2012
title	Reutilizando códigos como mecanismo de información y conocimiento: Programación en arquitectura [Reusing codes as a mechanism of information and cognition: Scripting in architecture]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 74-78
summary	Differently from other regions in the Planet, since 2010, in Latin America textual programming language (Rhinoscripting) is being replaced by its visual equivalent (Grasshopper). This is a consequence of our preference for an interactive platform, and because our design problems are not as complex, so we aim to control geometrical problems or aspects belonging to an product scale instead of an architectural one. Problems emerging when creating code could be improved by modifying and reusing existing solutions as a starting point, since learning would not be centered in the object but in the process of creating it, using a suitable instrument.
keywords	Visual Programming Language; Textual Programming Language; Scripting; Grasshopper; Rhinoscripting
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ecaade2011_165
id	ecaade2011_165
authors	Riether, Gernot; Jolly, Knox
year	2011
title	Flexible Systems: Flexible Design, Material and Fabrication: The AIA pavilion as a case study
doi	https://doi.org/10.52842/conf.ecaade.2011.628
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.628-634
summary	This paper is about the fabrication process of the DesCours pavilion, a project that was realized in the context of a graduate design studio in the Fall Semester of 2010. The assembly and construction process of the pavilion will be used to show how parametric software, such as Grasshopper can inform fabrication and material systems. The paper will explain the fabrication process of a pavilion in detail and make an argument for plastic as a material that not only responds to the malleable characteristic of digital tools but also to environmental issues.
wos	WOS:000335665500073
keywords	Design Build; Grasshopper; CNC; Parametric Design; Digital Fabrication; Plastic
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2010_229
id	ecaade2010_229
authors	Aschwanden, Gideon D. P. A.; Wullschleger, Tobias; Müller, Hanspeter; Schmitt, Gerhard
year	2010
title	Agent based Emission Evaluation of Traffic in Dynamic City Models
doi	https://doi.org/10.52842/conf.ecaade.2010.717
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.717-726
summary	We present a simulation platform to evaluate procedurally generated 3d city models with a set of agents representing urban street actors and pedestrians towards greenhouse gas emissions from transportation. Our aim is to give architects and urban planners an empiric tool to analyze, predict and quantify traffic fluctuations over time, and define the number of occupants, individual traffic and public transport in a city. In this project we show that the allocation of functions within a city is an important factor for the appearanceof traffic. The occupant’s decisions where they want to go are defined by the allocation of functions – and the distance defines the mode of transportation. We simulate the decision processes and gain information about the path, the mode of transportation, and the emissions they produce, and individual experiences like stress and effort. The autonomous driving cars are equipped with an acceleration based emission model allowing us to evaluate the inpact of jammed streets on the emission of cars.
wos	WOS:000340629400077
keywords	Urban planning; Multi-agent system; Generative city model; Occupant movement; Traffic emission
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: