Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 453

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20108408
id	ijac20108408
authors	Brown, Andre; Nicholas Webb
year	2010
title	Examination of the Designs by Auguste Perret Using Digitally-Enabled Forensic Techniques
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 537
summary	This paper discusses how digitally-enabled techniques can be used to augment our understanding of a designer's work, particularly in relation to unbuilt or lost projects. In the first half of the twentieth century Auguste Perret gained international recognition for his buildings and we employ two of his unbuilt museums as the basis for illustration of the technique. Current knowledge of his unbuilt projects is based on surviving literature and incomplete illustrations. We show that the use of digitally-enabled techniques facilitates a fuller examination of the original material. Interpretation of material requires parallel studies into the architect, their influences and the context they operated within in order to extrapolate and fill gaps in an informed way. The construction of various digital representations enables a forensic analysis of the projects; consequently we can produce a richer set of information that can, in turn, enhance our analysis and understanding of an architect and their work, in this case, Perret.
series	journal
last changed	2019/05/24 09:55

_id	acadia10_333
id	acadia10_333
authors	Blough, Lawrence
year	2010
title	Digital Tracery: Fabricating Traits
doi	https://doi.org/10.52842/conf.acadia.2010.333
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 333-339
summary	Recently, prototyping enabled by CNC technology has found its way into design practice where concepts can be quickly and economically tested through multiple design iterations that closely approximate the realities of oneto- one construction. This has lead to the promise of renewed research in tectonics and constructional techniques where the traditional concepts of craft and the joint, that were once married to the hand, can be rediscovered through the agency of mass customization. If we apply the lineage of the trait—a representational and cognitive tool to marry complex form with the exigencies of construction—pedagogical approaches can be developed that extend the current interest in intricate surface, structural morphology and geometry towards a robust materiality rooted in componentry, the joint, and part-to-whole relationships. This paper will introduce several threads from the twentieth century that have informed these tendencies in contemporary design practice, emerging from the well spring of Viollet-le-Duc. The thesis is supported by undergraduate model-based research employing digital design and fabrication techniques.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	architectural_intelligence2023_10
id	architectural_intelligence2023_10
authors	Cheng Bi Duan, Su Yi Shen, Ding Wen Bao & Xin Yan
year	2023
title	Innovative design solutions for contemporary Tou-Kung based on topological optimisation
doi	https://doi.org/https://doi.org/10.1007/s44223-023-00028-x
source	Architectural Intelligence Journal
summary	Tou-Kung, which is pronounced in Chinese and known as Bracket Set (Liang & Fairbank, A pictorial history of Chinese architecture, 1984), is a vital support component in the Chinese traditional wooden tectonic systems. It is located between the column and the beam and connects the eave and pillar, making the heavy roof extend out of the eaves longer. The development of Tou-Kung is entirely a microcosm of the development of ancient Chinese architecture; the aesthetic structure and Asian artistic temperament behind Tou-Kung make it gradually become the cultural and spiritual symbol of traditional Chinese architecture. In the contemporary era, inheriting and developing Tou-Kung has become an essential issue. Several architects have attempted to employ new materials and techniques to integrate the traditional Tou-Kung into modern architectural systems, such as the China Pavilion at the 2010 World Expo and Yusuhara Wooden Bridge Museum. This paper introduces the topological optimisation method bi-directional evolutionary structural optimisation (BESO) for form-finding. BESO method is one of the most popular topology optimisation methods widely employed in civil engineering and architecture. Through analyzing the development trend of Tou-Kung and mechanical structure, the authors integrate 2D and 3D optimisation methods and apply the hybrid methods to form-finding. Meanwhile, mortise and tenon joint used to create stable connections with components of Tou-Kung are retained. This research aims to design a new Tou-Kung corresponding to “structural performance-based aesthetics”. The workflow proposed in this paper is valuable for Architrave and other traditional building components.
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

_id	caadria2010_034
id	caadria2010_034
authors	Chung, Daniel Hii Jun and Malone-Lee Lai Choo
year	2010
title	Computational fluid dynamics for efficient urban design
doi	https://doi.org/10.52842/conf.caadria.2010.357
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 357-366
summary	Computational fluid dynamics (CFD) is a method of solving and analysing problems that involved fluid flows. In the field of architecture, urban design and urban planning, CFD is useful for the analysis of ventilation and airflow in the built environment, especially in very dense cities. This paper will look into the possibility of making CFD more accessible to the general design and planning field. A simulation is done on a urban design proposal to quickly see how air flow behaves around it. From there, it looks into the future where technology will make CFD simulation more easily adopted and the possibilities of integrating the ventilation analysis with other environmental analysis results into the urban design arena.
keywords	Computational fluid dynamics; sustainability; high density; urban design; airflow
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2010_168
id	ecaade2010_168
authors	Halatsch, Jan; Caro, Thomas; Moser, Bruno; Schmitt, Gerhard
year	2010
title	A Grammar-based Procedural Design Guideline Visualization Diagram for the Development of SVA Masdar
doi	https://doi.org/10.52842/conf.ecaade.2010.833
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.833-840
summary	Nowadays, a large set of involved planning parties are heavily demanded with the definition of holistic in kind requirement specifications for urban planning sites – so called future cities. However, the resulting amountof specifications for a specific building project poses a great challenge to designers and planners especially when it comes to include this information into their design proposals for a sustainable urban development. These design performance criteria are traditionally expressed in textual and numerical planning guidelines and which are making it difficult to establish a comprehensive and holistic view onto the domain itself. Therefore we present in this paper a design guide visualization method to overcome this situation for the evaluation of design specification and urban layouts in a qualitative and quantitative manner.
wos	WOS:000340629400089
keywords	Sustainable urban patterns; Shape grammars; Design evaluation; Urban planning; Design guide translation
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2010_097
id	ascaad2010_097
authors	Kenzari, Bechir
year	2010
title	Generative Design and the Reduction of Presence
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 97-106
summary	Digital design/fabrication is slowly emancipating architectural design from its traditional static/representational role and endowing it instead with a new, generative function. In opposition to the classical isomorphism between drawings and buildings, wherein the second stand as translations of the first, the digital design/fabrication scenario does not strictly fall within a semiotic frame as much as within a quasi biological context, reminiscent of the Aristotelian notion of entelechy. For the digital data does not represent the building as much it actively works to become the building itself. Only upon sending a given file to a machine does the building begin to materialize as an empirical reality, And eventually a habitable space as we empirically know it. And until the digital data actualizes itself, the building qua building is no more than one single, potential possibility among many others. This new universe of digital design/fabrication does not only cause buildings to be produced as quick, precise, multiply-generated objects but also reduces their presence as original entities. Like cars and fashion items, built structures will soon be manufactured as routinely-consumed items that would look original only through the subtle mechanisms of flexibility: frequent alteration of prototype design (Style 2010, Style 2015..) and “perpetual profiling” (mine, yours, hers,..). The generic will necessarily take over the circumstantial. But this truth will be veiled since “customized prototypes” will be produced or altered to individual or personal specifications. This implies that certain “myths” have to be generated to speed up consumption, to stimulate excessive use and to lock people into a continuous system which can generate consumption through a vocabulary of interchangeable, layered and repeatable functions. Samples of “next season’s buildings” will be displayed and disseminated to enforce this strategy of stimulating and channeling desire. A degree of manipulation is involved, and the consumer is flattered into believing that his or her own free assessment of and choice between the options on offer will lead him or her to select the product the advertiser is seeking to sell. From the standpoint of the architect as a maker, the rising upsurge of digital design and fabrication could leave us mourning the loss of what has been a personal stomping ground, namely the intensity of the directly lived experiences of design and building. The direct, sensuous contact with drawings, models and materials is now being lost to a (digital) realm whose attributes refer to physical reality only remotely. Unlike (analogue) drawings and buildings, digital manipulations and prototypes do not exercise themselves in a real space, and are not subjected in the most rigorous way to spatial information. They denote in this sense a loss of immediacy and a withering of corporal thought. This flexible production of space and the consequent loss of immediate experience from the part of the designer will be analyzed within a theoretical framework underpinned mainly by the works of Walter Benjamin. Samples of digitally-produced objects will be used to illustrate this argument.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_167
id	ecaade2010_167
authors	Kunze, Antje; Schmitt, Gerhard
year	2010
title	A Conceptual Framework for the Formulation of Stakeholder Requirements
doi	https://doi.org/10.52842/conf.ecaade.2010.697
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.697-705
summary	We need to face challenging needs for the planning of sustainable future cities. New methods in urban simulation enhance significantly the early urban design phase. However, these promising methods will only be sustainable if they consider stakeholder participation from the very beginning. Therefore we propose a conceptual framework for the formulation of stakeholder requirements, which enables the iterative modification of an urban model inside participatory workshops. A special emphasis concentrates on environmental, social and economical factors. The requirements posed by the stakeholders are instantly transferred into urban design patterns. Each single pattern stands for a solution for a specific problem that is integrated and visualized in a procedural model. Our goal is to create a participatory process that takes advantages by the use of comprehensive urban design patterns. The results are integrated within an interactive procedural model that communicate the most important guidelines for the planning of sustainable future cities.
wos	WOS:000340629400075
keywords	Decision-making process; Stakeholder participation; Shape grammars; Urban patterns; Urban planning
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_090
id	ecaade2010_090
authors	Ladouce, Nicolas; Hee, Limin; Janssen, Patrick T.
year	2010
title	Urban Space Planning for Sustainable High Density Environment
doi	https://doi.org/10.52842/conf.ecaade.2010.777
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.777-785
summary	In this paper we investigate the possibilities of new typologies of urban public space for high density environments. The premise for the project would be that with new high-density typologies, it would be necessary to consider a difference in the nature of urban public spaces rather than a difference in degree from the status quo. From observations of urban patterns that drive collective, hybrid spaces around Asia, relationships between urban attributes are drawn. For this paper we shall focus on the particular case of Linked Hybrid, Beijing, China, as an elevated urban public space. A literature review focuses on reviewing key theories to construct and adopt a rating system to develop an empirical framework to evaluate the case studies and extract the key attributes. These rated attributes are then abstracted in a real-time model that enables user manipulation. The purpose is to create a tool to better observe the effects and evolution of planning decisions for future urban spaces in high density contexts. The preliminary results are consistent with the idea that selected spatial parameters of a space may be embedded into a “barcode” and referenced as a type. The combination of different types, hence their parameters may be used for effective replication of their characteristics to improve the decision-making process for urban designers. The research is not intended to reproduce the successful urban public spaces but rather result in a catalogue of typologies which can be referred to during the initial stages of planning to provide an indication of spatial qualities.
wos	WOS:000340629400083
keywords	High density environments; Collective urban space; Hybrid typologies; Parametric urbanism
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia10_73
id	acadia10_73
authors	Mathew, Anijo Punnen
year	2010
title	Just in Place Learning: A Novel Framework for Employing Information in “Place” for Urban Learning Environments
doi	https://doi.org/10.52842/conf.acadia.2010.073
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 73-80
summary	Nineteenth century models of education and learning which dictate that information is passed on from teacher to apprentice :abstract in a closed classroom environment seem archaic to us, especially since so much of our experiences are constructed in the outside world. Advances in ubiquitous and calm computing; social and immersive media; and urban locative technologies now allow for embedding complex information into physical environments and thus open up possibilities for teachers to set up carefully tagged student engagements in the real world—in “places” where real scientific phenomena are happening and technological artifacts can be engaged with. However these models are seldom successful because they are employed without an understanding of changing paradigms of learning. In this paper, we look at several new developments in learning models and use them to develop Just in Place learning, a novel framework which harnesses embodiment, place, and the potential of new locative technologies to augment traditional practice-based learning. Just in Place learning provides new potential for teachers and students to engage with information in “place,” exploit the urban environment as the new classroom, and the built environment as a portal for situated learning.
keywords	Urban computing, interactive environments, education, digital media learning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2010_056
id	ecaade2010_056
authors	Oezener, Ozan Oender; Farias, Francisco; Haliburton, James; Clayton, Mark J.
year	2010
title	Illuminating the Design: Incorporation of natural lighting analyses in the design studio using BIM
doi	https://doi.org/10.52842/conf.ecaade.2010.493
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.493-498
summary	The growing demand for sustainable architectural design motivates the integration of BIM technologies and novel design processes into architectural education. This paper presents the results from a set of educational case studies for the incorporation of BIM-based daylighting simulations and analyses into the design studio. With a carefully devised studio setting and the participation of interdisciplinary consultants, the experimental case studies simulated an integrated design process based on rapid information exchange and collaborative decision making. The implemented method enables students to use BIM models and daylighting simulations as significant sources of design information for performance-based architectural design.
wos	WOS:000340629400053
keywords	BIM; daylighting simulations; Collaborative design; Integration
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2010_149
id	ecaade2010_149
authors	Salim, Flora Dilys; Burry, Jane; Taniar, David; Lee, Vincent Cheong; Burrow, Andrew
year	2010
title	The Digital Emerging and Converging Bits of Urbanism: Crowddesigning a live knowledge network for sustainable urban living
doi	https://doi.org/10.52842/conf.ecaade.2010.883
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.883-891
summary	Data is ubiquitous in our cities. However, designing a knowledge network about our cities is an arduous task, given that data sensed cannot be used directly, human significance must be added. Adding human significance can be achieved via an automated “expert system (ES)” in which domain expert knowledge are stored in a knowledge-based repository. The domain expert knowledge is matched with the corresponding data to derive specific inference which can aid decision making for urban stakeholders.This requires amalgamation of various interdisciplinary techniques. This paper presents a survey of existing technologies in order to investigate the emerging issues surrounding the design of a live knowledge network for sustainable urban living. The maps and models of the existing infrastructure of our cities that include a wealth of information such as topography, layout, zoning, land use, transportation networks, public facilities, and resource network grids need to be integrated with real-time spatiotemporal information about the city. Public data in forms of archives and data streams as well as online data from the social network and the Web can be analyzed using data mining techniques. The domain experts need to interpret the results of data mining into knowledge that will augment the existing knowledge base and models of our cities. In addition to the analysis of archived and streamed data sources from the built environment, the emerging state-of-the-art Web 2.0 and mobile technologies are presented as the potential techniques to crowddesign a live urban knowledge network. Data modeling, data mining, crowdsourcing, and social intervention techniques are reviewed in this paper with examples from the related work and our own experiments.
wos	WOS:000340629400094
keywords	Crowdsourcing; Knowledge discovery; Mobile and ubiquitous computing; Urban modeling; Spatial interaction; Social networking; Web 2.0
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2010_058
id	caadria2010_058
authors	Schneider, Sven; Nancy Richter, Frank Petzold, Reinhard König
year	2010
title	Open architectural design: an approach to managing complexity and uncertainty in an open design process
doi	https://doi.org/10.52842/conf.caadria.2010.629
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 629-638
summary	By open exchange of ideas and artifacts and non apriori hierarchical processes, Open Strategies enable a better usage of distributed resources, and the release of more creative potential. Applying these Open Strategies to the architectural design process, is goal of our project. The technical basis for our research is FREAC, a software framework developed in-house which provides a collaboration space for co-operation between different users and tools. This framework is designed not just for exchanging the outcome of the design process but also for opening up the design process itself and making it more transparent. Such highly open and distributed design processes, however, also present new problems and uncertainties which need to be taken into account in order to reach successful design outcomes. As a result proposals for the management of such processes need to be developed that facilitate collaborative work but do not unnecessarily constrain the inherent complexity of the design process. The actor-network theory, and other different management concepts, provides a theoretical underpinning for our approach. The project is a collaboration between the fields of computer science in architecture and media management.
keywords	Collaboration; open design process; actor-network theory; software framework
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	sigradi2010_312
id	sigradi2010_312
authors	Villate, Camilo; Bravo Germán; Tamayo Brando; Mauricio Caviedes
year	2010
title	La toma de decisiones en cursos del área técnica de arquitectura con herramientas tecnológicas basadas en el conocimiento [Decision - making in architecture technical areas, using knowledge based tools]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 312-315
summary	Specialists and educators have proven the effectiveness of using case studies as a learning support method. In the teaching of architectural techniques some technologically - based tools have been developed that enable students to accumulate technical data from studied cases. Nevertheless, this way of presenting case studies to students has restricted their potential because it promotes design fixation, typification, and functional incoherence. A complementary TIC - based tool for case studies is presented here, which allows the relation of technical data to the dynamic situations that produce them. This new tool is designed to increase students´ analysis and design capacities, and turns accumulative technical data systems into integral technological tools for teaching architectural techniques.
keywords	case studies; design fixation; repository systems; dynamic of situations
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ijac20108102
id	ijac20108102
authors	Budroni, Angela; Jan Boehm
year	2010
title	Automated 3D Reconstruction of Interiors from Point Clouds
source	International Journal of Architectural Computing vol. 8 - no. 1, 55-73
summary	We present a new technique for the fully automated 3D modelling of indoor environments from a point cloud. The point cloud is acquired with several scans and is afterwards processed in order to segment planar structures, which have a noticeable architectural meaning (floor, ceiling and walls) in the interior. The basic approach to data segmentation is plane sweeping based on a hypothesis-and-test strategy. From the segmentation results, the ground plan is created through cell decomposition by trimming the two-dimensional ground space using half-space primitives. An extension in height of the ground contours makes the generation of the 3D model possible. The so-reconstructed indoor model is saved in CAD format for analysis and further applications or, simply, as a record of the interior geometry.
series	journal
last changed	2019/05/24 09:55

_id	4d7d
id	4d7d
authors	Marionyt Tyrone Marshall
year	2010
title	HYGROSCOPIC CLIMATIC MODULATED BOUNDARIES: A Strategy for Differentiated Performance Using a Natural Circulative and Energy Captive Building Envelope in Hot and Moisture Rich Laden Air Environments
source	Perkins+Will Research Journal, Vol 02.01, 41-53
summary	The operation and construction of buildings account for almost half of the energy use in the United States. To meet global climate change targets, energy consumption of buildings in the long term must be reduced as well as carbon dioxide emissions. This article explores a theoretical building envelope that generates energy and produces water by drawing water vapor out of the air to deliver new sources of water; it lowers indoor humidity in hot and humid climates. The design in this model considers materiality, surface area and environmental conditions to influence build- ing form. The case in this article considers materials and systems application in the design of the building envelope. The hygroscopic building envelope design strategically senses varying conditions of concentration and density of moisture laden air to provide visual indications of its performance. It is a building skin that emulates biological processes by creating pressure differences and transferring energy in various forms.
keywords	biomimetics, building envelope, building façade, computational design, computational control, humidity, hygroscopic, renewable resources
series	journal paper
type	normal paper
email
more	http://www.perkinswill.com/research/research-journal-vol.-02.01.html
last changed	2010/10/31 02:39

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2010_039
id	ascaad2010_039
authors	Almusharaf, Ayman M.; Mahjoub Elnimeiri
year	2010
title	A Performance-Based Design Approach for Early Tall Building Form Development
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 39-50
summary	This paper presents a methodological interactive design approach within which structure is integrated into tall building form development. The approach establishes a synergy between generative and analytical tools to allow for parallel interaction of the formal and structural design considerations during the conceptual design phase. An integration of the associative modeling system, Grasshopper, and the structural analysis tool, ETABS was established, and a bi-directional feedback link between the two tools was initiated to guide the iterative from generation process. A design scenario is presented in this paper to demonstrate how the parametric generation and alteration of architectural form can be carried out based on instant feedback on the structural performance. Utilizing such a tool, architects can not only develop improved understanding of structural needs, but also realize their formal ideas structurally and materially.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	sigradi2010_47
id	sigradi2010_47
authors	Angulo, Antonieta; Mounayar Michel
year	2010
title	Virtual Sets: A Mixed Reality Application for an Old Practice
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 47-50
summary	This paper chronicles the implementation of state - of - the - art virtual set technology through the teaching of an independent study course at Ball State University. The paper describes the use of independent study formats as a means to initiate teaching of emergent media that does not fit neatly into specific academic silos. In addition to its learning potential this technology offers a new practice area for architects and designers that have an understanding of communication studies and space design at the crossroads of imagination. The creative realm for new emergent media and markets requires new teaching formats, opportunities and challenges for future implementation.
keywords	virtual sets, design communications, 3D modeling, design, mixed reality
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20108202
id	ijac20108202
authors	Apollonio, Fabrizio I.; Cristiana Corsi, Marco Gaiani, Simone Baldissini
year	2010
title	An Integrated 3D Geodatabase for Palladio's Work
source	International Journal of Architectural Computing vol. 8 - no. 2, 111-133
summary	The paper presents a novel digital 3D GIS web-based system entirely founded on Google Earth, built to offer a deep insight into Palladio's opera for restitution of its architectural surveys, reconstruction for historical reasons, analysis for structural and other options, and assembly and presentation of all certified Palladian documentation.The development of the application follows the philosophy of visual computing and it is based on an architectural knowledge representation.The information system is conceived as a typical Rich Internet Application and it is based on the digitalization of the complete Palladian corpus documentation implemented by the Centro Internazionale di Studi di Architettura Andrea Palladio (CISAAP).The 3D geodatabase system is, actually, in use at the Centro as the Palladian information system for researchers and in two expositions at Barbaran da Porto Palace in Vicenza, and at Villa Poiana at Poiana Maggiore, where is widely used by tourists for virtual visits to Palladian buildings.
series	journal
last changed	2019/05/24 09:55

For more results click below: