Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 448

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2010_058
id	ecaade2010_058
authors	Oezener, Ozan Oender; Jeong, Woonseong; Haliburton, James; Clayton, Mark J.
year	2010
title	Utilizing 4D BIM Models in the Early Stages of Design
doi	https://doi.org/10.52842/conf.ecaade.2010.089
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.89-96
summary	Architectural design education can benefit from incorporation of 4D CAD techniques into a BIM-enabled process for rapid design and assessment of alternatives. Experimental courses conducted at two universities provide evidence that graduate students possessing modest skills with BIM software can adopt 4D CAD methods and integrate them into their design process with minimal effort. The method enables student teams to gain insight into the construction issues of their designs and iteratively improve design alternatives.
wos	WOS:000340629400009
keywords	BIM; 4D visualization; Design; Collaboration; Integrated project delivery
series	eCAADe
email
last changed	2022/06/07 08:00

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_186
id	acadia11_186
authors	Chaturvedi, Sanhita; Colmenares, Esteban; Mundim, Thiago
year	2011
title	Knitectonics
doi	https://doi.org/10.52842/conf.acadia.2011.186
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 186-195
summary	The project Knitectonics aims at exploring digital fabrication systems that facilitate optimized, adaptive and specific integrated architectural solutions (Male-Alemany 2010). It is inspired by the beauty of nature systems with their inherent efficiency and performance. The research explored on-site fabrication of monocoques shells, integrating skin and structure along with services and infrastructure, using a simple household technique. It thus embodies a self organized micro system of textures and a macro system of structures. This paper elaborates how the numeric aspects of a textile technique were used, first to digitally imitate the process of assembly and further exploited to develop and visualize a novel fabrication system, based on material research and technical experimentation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia10_211
id	acadia10_211
authors	Crawford, Scott
year	2010
title	A Breathing Building Skin
doi	https://doi.org/10.52842/conf.acadia.2010.211
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 211-217
summary	This paper details an initial exploration into the development of a breathing building skin. This research proposes a system of diaphragms as an alternative to the use of fans for distributing volumes of air. The driving concepts for this project are the three types of evolutionary adaptation: flexibility, acclimation, and learning. Of particular interest is how these biological concepts relate to architectural design. Parametric modeling was used throughout the project to study a family of folding geometry. This allowed for the iterative development of a complex part that is capable of being manufactured from a single sheet of material. Preliminary calculations point to this system being several times more energy efficient than a fan at moving a given volume of air per Watt of electricity. This research is significant as it puts forth a potentially energy efficient and highly integrated alternative to fans, while also illustrating a way of relating biological concepts of adaptation to architectural design.
keywords	adaptation, responsive, kinetic, ventilation, space frame, parametric
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia10_117
id	acadia10_117
authors	Crotch, Joanna; Mantho, Robert; Horner, Martyn
year	2010
title	Social Spatial Genesis: Activity Centered Space Making
doi	https://doi.org/10.52842/conf.acadia.2010.117
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 117-124
summary	Digital technologies and processes have been used to generate architectural form for over two decades. Recent advances in digital technologies have allowed virtual digital environments to be constructed from physical movement. But can a bridge that connects the physical and virtual realms be developed? Can this, currently arbitrary form making be grounded in human activity and subsequently be integrated in to real time, space, and place. This research asks how space generated from the process of digital morphogenesis can be related to meaning beyond just the creation of form. Existing research asks how new form can be discovered, or what material and structural possibilities can be derived from form, through these morphological processes. The aim of this research project is to complete the loop, physical–virtual–physical, and to connect these digital processes to meaning through human activity. Its aim is to discover the consequences of generated spatial envelopes that are manipulated through digital morphogenesis and related to specific human activity, in the pursuit of possibilities for a digitally generated architecture that is socially engaged. This is not random form finding, wherein architecture tries to imitate biological processes or form, but form finding that is connected to a primary architectural concern, how is the architecture being used by humans.
keywords	Social digital morphogenesis, event based, motion capture
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	caadria2010_027
id	caadria2010_027
authors	Fernando, Ruwan; Robin Drogemuller, Flora Dilys Salim and Jane Burry
year	2010
title	Patterns, heuristics for architectural design support: making use of evolutionary modelling in design
doi	https://doi.org/10.52842/conf.caadria.2010.283
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 283-292
summary	Software used by architectural and industrial designers has shifted from becoming a tool for drafting, towards use in verification, simulation, project management and remote project sharing. In more advanced models, design parameters for the designed object can be adjusted so that a family of variations can be produced rapidly. With the advances in computer aided design (CAD) technology, design options can now be generated and analyzed in real time. However the use of digital tools to support design as an activity is still at an early stage and has largely been limited in functionality with regard to the design process. To date, major CAD vendors have not developed an integrated tool that is able to leverage specialised design knowledge from various discipline domains (known as expert knowledge systems) as well as to support the creation of design alternatives that satisfy different forms of constraints. We propose that evolutionary computing and machine learning be linked with parametric design techniques in order to monitor a designer’s cognition and intent based on their design history. This will lead to results that impact future work on design support systems which are capable of supporting implicit constraint and problem definition for wicked problems that are difficult to quantify.
keywords	Design support; heuristics; generative modelling; parametric modelling; evolutionary computation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2010_249
id	ascaad2010_249
authors	Hawker, Ronald; Dina Elkady and Thomas Tucker.
year	2010
title	Not Just Another Pretty Face
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 249-260
summary	Digital Heritage has gained popularity recently as means of dynamically representing and reconstructing historic buildings and cityscapes. Simultaneously this new medium of visualization affords another approach to examine human-virtual environment interaction and offers possibilities of exploiting virtual environments as educational tools. At Zayed University, a federal university primarily for women citizens of the United Arab Emirates, we have integrated student-faculty research and documented and reconstructed a number of historical buildings within the curriculum of the Department of Art and Design. We have further collaborated with the animation program at Winston Salem State University in North Carolina, utilizing the motion capture laboratory at the Center of Design Innovation to literally breathe life into these reconstructions. The primary idea is to contribute to the ongoing documentation of the country’s heritage through creating “responsive virtual heritage environments” where the spectator is actively engaged in exploring the digital space and gain certain degrees of control over the course and scheme of the dynamic experience. The process begins by introducing students to utilize the diverse capabilities of CAD and three dimensional computer applications and intertwine the technical skills they acquire to construct virtual computer models of indigenous built environments. The workflow between the different applications is crucial to stimulate students’ problem solving abilities and tame the application tools, specifically when constructing complex objects and structural details. In addition the spatial and temporal specificity different computer applications afford has proven useful in highlighting and analyzing the buildings’ function within the extreme climate of the country and their role in the political-economy, particularly in visualizing the ephemeral qualities of the architecture as they relate to passive cooling and the inter-relationships between built and natural environments. Light and time settings clarify shadow casting and explain the placement and orientation of buildings. Particle simulations demonstrate the harnessing of wind and rain both urban and rural settings. The quantitative data accumulated and charted through CAD and VR programs and geo-browsers can be integrated with qualitative data to create a more holistic analytical framework for understanding the complex nature of past settlement patterns. In addition, the dynamic nature of this integration creates a powerful educational tool. This paper reviews this ongoing research project with examples of reconstructions completed across the country, demonstrating analytical and educational possibilities through the integration of CAD programs with a range of other statistical, geographic, and visualization software.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_203
id	acadia10_203
authors	Jaskiewicz, Tomasz
year	2010
title	(In:)forming Interactive Architectural Systems, Case of the xMAiA Meta-model
doi	https://doi.org/10.52842/conf.acadia.2010.203
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 203-210
summary	This paper positions the domain of interactive architecture (iA) and searches for an appropriate model for structure and processing of information in the design and operation of such architecture. It is shown that there are different approaches to ways in which iA system models can be defined, each with numerous advantages and disadvantages. However, due to complexity of encountered problems, application of such models can be only partially validated by simulation and hence their design is inherently dependent on creation of operational and experiential full-scale prototypes of the systems these models represent. Another observation is the lack of correspondence between existing iA models and other contemporary models of computation for architectural geometry, fabrication and engineering. A meta-model for extensible multi-agent interactive architecture (xMAiA) is consequently proposed as a remedy to this situation. xMAiA meta-model is aimed to provide an open framework for integrated evolution, development and operation of interactive architectural systems. It delivers an extensible platform, in which diverse, project-specific models and approaches can be implemented, tested, and further evolved. Such a platform has the potential to empower agile development and operation of interactive architectural ecologies, as well as to substantially facilitate integration of creative design and experiential prototyping from day-1 of project design and development cycle. An example application conforming to the xMAiA meta-model is consequently presented and illustrated with a case study project performed in the university education context.
keywords	multi agent systems, interactive architecture, responsive architecture, design tools
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	acadia10_139
id	acadia10_139
authors	Miller, Nathan
year	2010
title	[make]SHIFT: Information Exchange and Collaborative Design Workflows
doi	https://doi.org/10.52842/conf.acadia.2010.139
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 139-144
summary	This paper explores design processes requiring the invention and implementation of customized workflows for the optimization of design information exchange. Standard workflows in design software are typically dependent upon the use of proprietary file formats to communicate design intent across the design team. Software platforms promote “one-stop-shop” proprietary approaches to BIM where all team members and consultants ideally operate within a single model environment and store information within a single file format. While the ‘single model’ approach can be effective under some circumstances, this approach is often found to be limiting when the design process calls for the integration of other design toolsets and delivery processes. This is especially true for large complex projects where multiple participants with different software requirements need to collaborate on the same design. In these cases, various non-standard ways of working are often implemented, resulting in a new means of communicating design and building information across a team. This paper will outline the impact customized workflows have on the design process at NBBJ and evaluate their potential for leading to more innovative design and integrated teams. The first study will explore and evaluate the communication and collaborative process that took place in the design development and construction documentation stages of the Hangzhou Stadium. The second study will be an overview of ongoing investigation and experimentation into customized workflows for team and data integration.
keywords	team integration, international practice, parametric methods
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ijac20108303
id	ijac20108303
authors	Rafael, Urquiza S.
year	2010
title	Parametric Performative Systems: Designing a Bioclimatic Responsive Skin
source	International Journal of Architectural Computing vol. 8 - no. 3, pp. 279-300
summary	This paper assumes the façade as an innovative element of interaction between the inside and the outside: the architectural skin. As in nature, one of its most significant functions is the energy exchange with the environment. Similarly, efficiency increases by passive and active responses to climate conditions and site orientation. This research explores the potential of parametric techniques, programming and digital manufacturing, to design and build a Bioclimatic Responsive Skin (BRS). Firstly, we designed a bio-component applicable to any surface due to its parametric nature. Secondly, we fabricated two non-reactive working prototypes to study the manufacturing and construction details. Thirdly, we integrated the physical and the digital interfaces by using Generative Components™, Arduino, and Ubimash to generate a kinetic responsive model. This prototype was presented at SmartGeometry Workshop and Conference 2010. Finally, Lem3a architecture used this BRS in a real design project for a Sustainable house in New Hope, PA.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2010_231
id	ascaad2010_231
authors	Turrin, M.; R. Stouffs and S. Sariyildiz
year	2010
title	Parametric Design of the Vela Roof
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 231-240
summary	Due to the increased request for representative structures and for spaces to be used independent of the weather conditions, contemporary cities increasingly integrate public covered spaces (shadowed squares and streets, courtyards, historic commercial galleries, etc.) in the urban fibre. Facing the design of large roof structures for semi outdoor spaces is increasingly common for architects and engineers. When focusing on large roofs, aesthetics, structural performance and economics often dominate the design process. However, the current increased emphasis on energy-related aspects generates new challenges. Particularly, the use of renewable energy resources needs to be confronted. In this paper we will address the subject through a case study whose design aimed at integrating performance evaluations in the very early stages of the process. The case study focuses on the so-called “Vela roof”. This roof is part of a larger project currently under construction in Bologna (Italy). The focus of the study concerns the use of on-site renewable climate (energy) resources with special attention given passive reduction of summer overheating and daylight. For these tasks a parametric model was developed to support the decision making process and the paper will present its potential with respect to performance-oriented design during the conceptual design phase of roof structure. The very first conceptual design developed by the architectural office was assumed as a starting point for the inclusion of performance criteria. In the preliminary design of the roof uncomfortable conditions were expected under the whole roof in the summer. Various strategies for improving the thermal comfort were investigated, involving a large set of combined systems. Not all of these will be detailed in this paper. Instead we will focus on the ones directly affected by the geometry of the roof. Those are mainly air flow for cooling and the reduction of solar gain, in combination with their effects on daylight. Their investigation was based on a chain of dependencies to be integrated in the design process. With respect to that, parametric modelling was used. Parametric modelling allows both geometrical entities and their relationships to be represented. These relationships are structured in a hierarchical chain of dependencies, established during the preliminary parameterization process. The independent properties of the model are usually expressed through independent parameters, and their variations generate different configurations of the model. By making use of this potential, three project scales were parametrically explored. At the large scale, parametric variations of the overall shape of the roof were investigated in relation to cooling through ventilation and here the parametric model allowed for the generation of both different configurations of the roof, including its structural morphology and variations of its structural tessellation. At the medium scale, the integration of openable modules was investigated in relation to air extraction for cooling; with respect to this, the parametric model allows exploring openings based on variations of size and distribution. At the small scale, various options were explored for the cladding system, in order to reduce the direct solar gain while still allowing the income of indirect natural light. The parametric model was used to investigate the configuration of self-shading modules and their integration in the structure. Specific emphasis will be given to the small scale. The advantages in design process and the current limits of the parametric modelling approach used here will be discussed in the paper.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_327
id	acadia10_327
authors	Vassigh, Shahin; Herrera, Silvana
year	2010
title	Interactive Teaching through Simulation Environments
doi	https://doi.org/10.52842/conf.acadia.2010.327
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 327-332
summary	Spurring new and innovative building design will be critical to the urban energy and economic future of the nation. The operation of completed buildings account for 48% of the nation’s annual greenhouse gas emissions, and 76% of all electricity generated by U.S. power plants goes to supply the building sector. Therefore developing and applying new and innovative sustainable building design will have a measurable impact on the environment. Recent studies show sustainable building design is closely linked to system integration, where various components of a building work in confluence to produce synergetic benefits. As a result, a critical component of sustainable design involves a clear understanding of building systems operation, interaction, and the selection parameters. A consideration of suitable building systems, gauging their interaction, and proposing well integrated systems can lead to producing efficient models of sustainable buildings with minimal impact on the environment. The following paper outlines the progress on a project entitled “Building Literacy: the Integration of Building Technology and Design in Architectural Education.” The project develops a digital tool for teaching/learning architectural technology from an integrated systems perspective. The project attempts to immerse students in a simulated environment that is based on the real life practice of architecture. The project accomplishes this by harnessing the capabilities of simulation and dynamic modeling programs, as well as the state of art graphic media, to create compelling and rewarding reasons for students’ engagement in the lear ning process. The project involves a multidisciplinary team of faculty from Florida International University, University at Buffalo the State University of New York, and Iowa State University and is funded by the US Department of Education for the period of 2007-2011.
keywords	educational software, interactive learning, interactive teaching, simulation programs, building performance, building integrated systems,
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	caadria2010_054
id	caadria2010_054
authors	Wong, Chit Kin D. and Yim Fun L. Cheung
year	2010
title	Simply complex: a case study of construction-driven design using computational methods
doi	https://doi.org/10.52842/conf.caadria.2010.585
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 585-594
summary	This paper explores how fabrication-based criteria can be integrated into design processes through computational methods. Based on the ongoing project of the Library of the Bao’an Cultural Complex in Shenzhen, China (referred as ‘the Library’ in this paper hereafter), this paper discusses the process of the rationalisation of an intuitive architectural form and its subsequent tiling design based on the adaptation to the conventional fabrication techniques of the building façade industry in China. These objectives are followed by the establishment of robust computational systems of automation that provide a concrete basis for the visualisation, the development of envelope details, and the generation of the list of component data for fabrication. This integrative approach is markedly different from a more conventional one, in which computational systems serve as a priori solutions to unconstraint design sketches.
keywords	Fabrication criteria; rationalisation; computation workfl ow
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
doi	https://doi.org/10.52842/conf.caadria.2010.327
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2010_184
id	ecaade2010_184
authors	Celani, Gabriela; Medrano, Leandro
year	2010
title	Schemas and Rules in the Design Process: A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2010.305
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.305-312
summary	The present paper describes the design process of a new prototypical building for the State University of Campinas, with the use of shape schemata and rules. The use of this construct or method made the design process more intelligible for the students who took part in the project and helped managing the team work. We expect that these rules will also allow the automation of the production of design alternatives and construction drawings for new buildings in the campus.
wos	WOS:000340629400032
keywords	Design process; Shape grammar; Rules; Schemata; Standard design system
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_179
id	ascaad2010_179
authors	Jones, Charles; Kevin Sweet
year	2010
title	Over Constrained
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 179-188
summary	Parametric software has fundamentally changed the way in which architecture is conceptualized, developed and even constructed. The ability to assign parameters or numeric variables to specific portions of a project has allowed designers the potential to test variations of their design. Small changes to a single parameter can have an exponential effect on the designed object and alter its appearance beyond original preconceptions in both positive and negative ways. Parametric software also has the ability to constrain or restrict geometry to set values, parameters or conditions. This has the benefit of allowing portions of a form to remain constant or unchanged while simultaneously allowing for a great degree of flexibility in response to a design intent. Constraining portions of a design allows architects to respond to existing or unalterable conditions by ""locking down"" information within a project and then explore those portions that can change more freely. This programmed relationship between the parameter and the form, once established, can give the illusion of minimal effort for maximum output. The ease in which geometrical form can be altered and shaped by a single variable can mislead beginning designers into thinking that the software makes these relationships for them. What is hidden, is the programming or connections needed between the parameters and the geometry in order to produce such dramatic change. Finally, thinking parametrically about design reintroduces the concept of a rigorous, intent driven, fabrication oriented practice; a practice lost in a digital era where the novelty of new tools was sufficient to produce new form. Because parametric models must have established relationships to all parts of the design, each component must have a purpose, be well thought out, and have a direct relationship to a real world object. The introduction of parametric design methodologies into an architectural pedagogy reestablishes architectural praxis in an academic setting. Students are taught to design based on creating relationships to connected components; just as they would do in a professional architectural practice. This paper outlines how Digital Project – a parametric based software – was introduced into an academic setting in an attempt reconnect the ideologies of academia with the practicalities of professional practice. In order to take full advantage of Digital Project as a parameter based software, a project that creates modular, flexible geometries was devised. Produced over one semester, the project set out to find ways of controlling designed geometry through variable parameters that allowed the initial module to be instantiated or replicated into a wall condition: maintaining a unified whole of discrete components. This paper outlines this process, the results and how the outcomes demonstrates the parametric ideologies described above.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_058
id	caadria2010_058
authors	Schneider, Sven; Nancy Richter, Frank Petzold, Reinhard König
year	2010
title	Open architectural design: an approach to managing complexity and uncertainty in an open design process
doi	https://doi.org/10.52842/conf.caadria.2010.629
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 629-638
summary	By open exchange of ideas and artifacts and non apriori hierarchical processes, Open Strategies enable a better usage of distributed resources, and the release of more creative potential. Applying these Open Strategies to the architectural design process, is goal of our project. The technical basis for our research is FREAC, a software framework developed in-house which provides a collaboration space for co-operation between different users and tools. This framework is designed not just for exchanging the outcome of the design process but also for opening up the design process itself and making it more transparent. Such highly open and distributed design processes, however, also present new problems and uncertainties which need to be taken into account in order to reach successful design outcomes. As a result proposals for the management of such processes need to be developed that facilitate collaborative work but do not unnecessarily constrain the inherent complexity of the design process. The actor-network theory, and other different management concepts, provides a theoretical underpinning for our approach. The project is a collaboration between the fields of computer science in architecture and media management.
keywords	Collaboration; open design process; actor-network theory; software framework
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ascaad2010_203
id	ascaad2010_203
authors	Sidawi, Bhzad
year	2010
title	The Sustainable Management of Remote Construction Projects
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 203-212
summary	This paper discusses investigates the use of present project management practices and systems by the construction department of the Saudi Electric Company (SEC), Kingdom of Saudi Arabia (KSA). It highlights shortages of the current management practices and systems and how it affects badly the sustainability dimensions of projects such as quality, scope, time and cost. The literature review suggests that Advanced Electronic Management and Communications systems (AEMCS) may help companies in managing remote projects efficiently thus minimizing the travel time, reducing unnecessary project costs and raising the quality of projects. Little research though was done regarding this issue and it found few unique management problems. A field survey was conducted on contractors and SEC’s supervision teams. It revealed that some of the remote project’s management problems however were caused by unprofessional and non standard project management conduct. It also found that traditional systems are very popular whereas advanced electronic systems are of little use. Participants expressed their concerns about the SEC’s present project management practices and their views regarding the implementation of advanced electronic project management systems and its possible impact on projects’ performance and process. The survey’s outcomes indicated that advanced electronic management systems should be tailored to SEC’s present and prospected needs, meanwhile SEC’s present project management methodologies should be adjusted into sustainable management practices. This would guarantee that project management practices will be substantially improved and sustainable objectives of projects are met. The study should motivate the SEC and other companies in KSA to review their present project management practices and systems, investigate the potentiality of advanced electronic systems use in managing remote projects and explore how to embrace sustainability’s dimensions in project management practices.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	sigradi2022_112
id	sigradi2022_112
authors	Toledo, Jimena
year	2022
title	The Role of Visual Platforms -visual Social Media- in the Creative Design Process
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 639–650
summary	In the current design practice, new digital tools have emerged -visual- also called Infrastructures (Perkel, 2011) such as; Behance 2003, Pinterest 2009, Archdaily 2008, Instagram (2010) -to cite the most recognized in the creative field in Argentina-, which promote different opportunities and support the creative process and problem solving, making it easier for designers to find inspiring material through the Internet. However, very little is known about how these new practices affect professional work, how they themselves see it and the tensions they generate.This article will present the results of a general survey applied to expert designers as part of the first stage of the Doctoral Research project. Which investigates the behavior referred specifically to the use of visual platforms -visual social media- in order to understand, characterize, describe the use and involvement of them within the design process.
keywords	Project processes - Creativity - Design process - Visual Social Media -Curatorial Practice
series	SIGraDi
email
last changed	2023/05/16 16:56

For more results click below: