Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 350

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_271
id	ascaad2010_271
authors	Sharkasi, Nour; Ramzi Hassan and Caroline M. Hagerhal
year	2010
title	Presence in Virtual Cave
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 271-278
summary	Virtual Reality (VR) is usually recognized as a tool that enables the viewer to move freely in a three dimensional digital environment. In this virtual world, different levels of immersion could be reached. Using VR to visualize sites and places from the past, presents and future is widely acknowledged. This study is making use of a recently installed U-Cave theatre at Birzeit University (BZU) in Palestine and a Con-Cave VR theatre at the Norwegian University of Life Sciences (UMB).In the study, we test hypotheses connected to presence in virtual reality environments, using the case of historical sites. Historical sites in general are important for reasons of cultural identification and environmental integrity. In many historical sites, it is difficult for a layperson to read and understand the meaning of the site, for that the remaining ruins don’t provide enough information. This study will contribute to improving the public understanding for historical sites by unfolding the role of Virtual Reality to overcome the harsh reality of many damaged historical sites. The story-line of the site can be easily portrayed by re-constructing the original site in a virtual environment. The study also elaborates on the enriched sense of presence made possible by implementing different levels of details in the VR environment. Presence in VR environments is usually defined as “being there”, with high consideration of the physical ether of the virtual environment, the definition confines attention to the sensation of place. This study calls for expanding the attention to the dimension of time that is made possible by innovative design of VR environment. The study argues that virtual reality technology does not only provide a 3-D experience to subjects, it can also add a fourth dimension by conveying the unconsciousness of man from the meanwhile moment to a different timeframe. Based on the current knowledge on presence in virtual environments, we will use a questionnaire to measure subjective presence for the two VR theatre systems. The study will make use of the following factors in order to determine the degree of presence in the virtual environment: (1) naturalness of interface design and involvement, (2) control and interaction, (3) quality of technical capabilities, and (4) negative effects. The outcome of the study will verify or falsify some of the following hypotheses: • There is a correlation between modeling techniques and presence. The perception of the visual experience differs between traditional media and an immersive VR environment. • A presentation of a historical site in a VR-Cave environment will increase our subject’s awareness of the identity of the historical site. • The presence level is correlated to previous real exposure. Subjects who had been to a ruined historical site in real life, would experience higher level of presence toward the VR presentation than those who had not been to the historical site in reality. • Because of the display enclosure surround effect, it is believed that presence in a Con-Cave would be higher than of U-Cave VR environment.
series	ASCAAD
type	normal paper
email
last changed	2011/03/01 07:47

_id	ecaade2010_097
id	ecaade2010_097
authors	Kontovourkis, Odysseas
year	2010
title	Computer-Generated Circulation Diagrams in Macro-Scale Design Investigation
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.623-632
doi	https://doi.org/10.52842/conf.ecaade.2010.623
wos	WOS:000340629400067
summary	This paper demonstrates an ongoing research investigation, which is the continuation of the author’s doctoral research on a computer-based design approach that is used for the generation of circulation diagrams, and the spatial organization of functional areas in macro-scale design level. The paper introduces a computer program that is based on the idea of particle behavior modeling. The program simulates the human movement behavior in real time and in parallel, based on simple rules of interaction between particles. The model is called a ‘virtual force’ model, since the interaction between particles, and hence human movement behavior modeling, is achieved by using various forces that are acting upon each particle. Any changes on the rules of interaction can produce different results, allowing architects to investigate various design possibilities and study the human movement behavior in different design case studies. In this paper the idea of modeling such movement behavior is investigated and developed further, in order for it to be used for the design of circulation systems, and to suggest solutions to problems that occur in public areas of cities.
keywords	Circulation diagrams; Human movement behavior; Macro-scale design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia10_151
id	acadia10_151
authors	Menges, Achim
year	2010
title	Material Information: Integrating Material Characteristics and Behavior in Computational Design for Performative Wood Construction
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 151-158
doi	https://doi.org/10.52842/conf.acadia.2010.151
summary	Architecture as a material practice is still predominantly based on design approaches that are characterized by a hierarchical relationship that prioritizes the generation of geometric information for the description of architectural systems and elements over material specific information. Thus, in the early design stage, the material’s innate characteristics and inherent capacities remain largely unconsidered. This is particularly evident in the way wood constructions are designed today. In comparison to most construction materials that are industrially produced and thus relatively homogeneous and isotropic, wood is profoundly different in that it is a naturally grown biological tissue with a highly differentiated material makeup . This paper will present research investigating how the transition from currently predominant modes of representational Computer Aided Design to algorithmic Computational Design allows for a significant change in employing wood’s complex anisotropic behaviour, resulting from its differentiated anatomical structure. In computational design, the relation between procedural formation, driving information, and ensuing form, enables the systematic integration of material information. This materially informed computational design processes will be explained through two research projects and the resultant prototype structures. The first project shows how an information feedback between material properties, system behaviour, the generative computational process, and robotic manufacturing allows for unfolding material-specific gestalt and tapping into the performative potential of wood. The second project focuses on embedding the unique material information and anatomical features of individual wooden elements in a continuous scanning, computational design and digital fabrication process, and thus introduces novel ways of integrating the biological variability and natural irregularities of wood in architectural design.
keywords	Computational Design, Digital Fabrication, Material Properties, Behavioural Modelling
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2010_134
id	ecaade2010_134
authors	Pechlivanidou-Liakata, Anastasia; Kerkidou, Maria P.; Zerefos, Stelios C.; Stamenic, Mladen; Mikrou, Tina; Doulgerakis, Adam
year	2010
title	Spatial Navigational Patterns Induced by Real and Virtual Architectural Environments
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.755-763
doi	https://doi.org/10.52842/conf.ecaade.2010.755
wos	WOS:000340629400081
summary	The scope of this paper is the identification of elements in architectural space that can trigger human behavior in both real and virtual environments. These elements can be either material, such as shapes and volumes or immaterial, such as light and shadow. Our research depends on a series of experiments taking place in an existing architectural environment (a high-school) and its virtual counterpart, focusing mainly on the spatial perception and cognition by the subjects through real-time navigational means. The aspect that survey knowledge (spatio-exploratory or exocentric perception) is “primary” in virtual environments seems to be confirmed. It is indicative that in the virtual environment the movement of subjects (primarily visitors) is related and defined strongly by specific architectural elements, such as a stoa and the staircases, while being strongly exploratory.
keywords	Virtual environment; 3D simulation; Immersive environment; Navigational pattern
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ascaad2010_179
id	ascaad2010_179
authors	Jones, Charles; Kevin Sweet
year	2010
title	Over Constrained
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 179-188
summary	Parametric software has fundamentally changed the way in which architecture is conceptualized, developed and even constructed. The ability to assign parameters or numeric variables to specific portions of a project has allowed designers the potential to test variations of their design. Small changes to a single parameter can have an exponential effect on the designed object and alter its appearance beyond original preconceptions in both positive and negative ways. Parametric software also has the ability to constrain or restrict geometry to set values, parameters or conditions. This has the benefit of allowing portions of a form to remain constant or unchanged while simultaneously allowing for a great degree of flexibility in response to a design intent. Constraining portions of a design allows architects to respond to existing or unalterable conditions by ""locking down"" information within a project and then explore those portions that can change more freely. This programmed relationship between the parameter and the form, once established, can give the illusion of minimal effort for maximum output. The ease in which geometrical form can be altered and shaped by a single variable can mislead beginning designers into thinking that the software makes these relationships for them. What is hidden, is the programming or connections needed between the parameters and the geometry in order to produce such dramatic change. Finally, thinking parametrically about design reintroduces the concept of a rigorous, intent driven, fabrication oriented practice; a practice lost in a digital era where the novelty of new tools was sufficient to produce new form. Because parametric models must have established relationships to all parts of the design, each component must have a purpose, be well thought out, and have a direct relationship to a real world object. The introduction of parametric design methodologies into an architectural pedagogy reestablishes architectural praxis in an academic setting. Students are taught to design based on creating relationships to connected components; just as they would do in a professional architectural practice. This paper outlines how Digital Project – a parametric based software – was introduced into an academic setting in an attempt reconnect the ideologies of academia with the practicalities of professional practice. In order to take full advantage of Digital Project as a parameter based software, a project that creates modular, flexible geometries was devised. Produced over one semester, the project set out to find ways of controlling designed geometry through variable parameters that allowed the initial module to be instantiated or replicated into a wall condition: maintaining a unified whole of discrete components. This paper outlines this process, the results and how the outcomes demonstrates the parametric ideologies described above.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2023_395
id	caadria2023_395
authors	Luo, Jiaxiang, Mastrokalou, Efthymia, Aldaboos, Sarah and Aldabous, Rahaf
year	2023
title	Research on the Exploration of Sprayed Clay Material and Modeling System
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 231–240
doi	https://doi.org/10.52842/conf.caadria.2023.2.231
summary	As a traditional building material, clay has been used by humans for a long time. From early civilisations, to the modern dependence on new technologies, the craft of clay making is commonly linked with the use of moulds, handmade creations, ceramic extruders, etc. (Schmandt and Besserat, 1977). Clay in the form of bricks is one of the oldest building materials known (Fernandes et al, 2010). This research expands the possibilities offered by standardised bricks by testing types of clay, forms, shapes, porosity, and structural methods. The traditional way of working with clay relies on human craftsmanship and is based on the use of semi-solid clay (Fernandes et al., 2010). However, there is little research on the use of clay slurry. With the rise of 3D printing systems in recent years, research and development has been emerging on using clay as a 3D printing filament (Gürsoy, 2018). Researchers have discovered that in order for 3D-printed clay slurry to solidify quickly to support the weight of the added layers during printing, curing agents such as lime, coal ash, cement, etc. have to be added to the clay slurry. After adding these substances, clay is difficult to be reused and can have a negative effect on the environment (Chen et al., 2021). In this study, a unique method for manufacturing clay elements of intricate geometries is proposed with the help of an internal skeleton that can be continuously reused. The study introduces the process of applying clay on a special structure through spraying and showcases how this method creates various opportunities for customisation of production.
keywords	Spray clay, Substructure, 3D printing, Modelling system, Reusable
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	sigradi2010_62
id	sigradi2010_62
authors	Monteiro, de Menezes Alexandre; Silva Viana Maria de Lourdes; Pereira Junior Mário Lucio; Palhares Sérgio Ricardo
year	2010
title	A eficiência da comunicação gráfica digital na etapa de projeto e seu reflexo na construção de uma edificação [The efficiency of digital graphic communication at the proeject stage and its impact on the construction of a building]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 62-65
summary	This research studies digital technology in graphic communication among professionals in building design, and its reflection in construction. There is evidence of difficulties caused by interference among the participants involved in building projects, resulting in rework, construction waste and discontent. The effectiveness of graphic communication among professionals is related to the efficiency of constructions. This research has identified procedures in the establishment of projects that contribute positively, or not, to the quality of graphic communication among professionals. After listing these procedures, the research identified their reflections in construction. The results confirm that it is possible to identify positive and negative consequences of graphic communication procedures among professionals involved in building construction.
keywords	graphic digital communication; building project; building construction
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadiaregional2011_019
id	acadiaregional2011_019
authors	Peters, Troy
year	2011
title	Simulation by Design: A Parametric Design Tool for Zero Energy Buildings
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.q2q
summary	To address the shortcomings of integrating building simulation in architectural design and to make it more appealing to students, a simple interface to Energyplus was created. This interface models a simple rectangular building that is passively heated by direct gain and cooled by ventilation. A simple photovoltaic interface has also been added to supply fan energy. This tool has an OpenGL modeler for visualization and uses Energyplus for calculations. The interface will run a full year simulation and graph the results. The results are reported in a yearly graph that shows the outdoor and indoor temperature. The indoor temperature range is based on adaptive comfort level. The interface was tested and used in an introductory design studio in order to comply with the 2010 imperative. The students simulated a simple box and changed the buildings parameters until the building fell within the adaptive comfort zone for most of the year. The climate simulated was Chicago, IL. Using these parameters the students then designed the building. The resulting designs show that even though the students were restricted in parameters, such as window percentage, they were still able to creatively design unique buildings that use zero to negative net energy for heating and cooling in a climate such as Chicago.
series	ACADIA
last changed	2022/06/07 07:49

_id	ascaad2010_189
id	ascaad2010_189
authors	Allahaim, Fahad; Anas Alfaris and David Leifer
year	2010
title	Towards Changeability
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 189-200
summary	Many buildings around the world have undergone successive changes over their life cycles. Regardless of the type or size of a building there are usually requirements for change due to several unanticipated forces and emerging uncertainties that act upon them. These changes might be in the building’s spatial, structural or service systems. This can be due to changes in the needs of occupants, the market demand or technological advances. Although buildings undergo change, current design practice does not address this and buildings are still designed as if they will remain static. This paper proposes an Adaptable Buildings Design (ABD) Framework to address the issue of adaptability in building design. Using this methodology uncertainties and future changes are first identified. To increase the building’s longevity, flexibility options are embedded and design rules are formulated to trigger these options when necessary. The value of adaptability is then assessed by implementing several simulations using Real Options Analysis (ROA). To demonstrate the approach, the ABD is applied to a multi-use commercial building case study. Flexibility is embedded in the building’s design across several systems allowing it to change and evolve over time based on a set of design rules. The buildings adaptability is then assessed using ROA. Positive results demonstrate the strength of the proposed methodology in addressing future change and uncertaintie.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ijac20108202
id	ijac20108202
authors	Apollonio, Fabrizio I.; Cristiana Corsi, Marco Gaiani, Simone Baldissini
year	2010
title	An Integrated 3D Geodatabase for Palladio's Work
source	International Journal of Architectural Computing vol. 8 - no. 2, 111-133
summary	The paper presents a novel digital 3D GIS web-based system entirely founded on Google Earth, built to offer a deep insight into Palladio's opera for restitution of its architectural surveys, reconstruction for historical reasons, analysis for structural and other options, and assembly and presentation of all certified Palladian documentation.The development of the application follows the philosophy of visual computing and it is based on an architectural knowledge representation.The information system is conceived as a typical Rich Internet Application and it is based on the digitalization of the complete Palladian corpus documentation implemented by the Centro Internazionale di Studi di Architettura Andrea Palladio (CISAAP).The 3D geodatabase system is, actually, in use at the Centro as the Palladian information system for researchers and in two expositions at Barbaran da Porto Palace in Vicenza, and at Villa Poiana at Poiana Maggiore, where is widely used by tourists for virtual visits to Palladian buildings.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_229
id	ecaade2010_229
authors	Aschwanden, Gideon D. P. A.; Wullschleger, Tobias; Müller, Hanspeter; Schmitt, Gerhard
year	2010
title	Agent based Emission Evaluation of Traffic in Dynamic City Models
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.717-726
doi	https://doi.org/10.52842/conf.ecaade.2010.717
wos	WOS:000340629400077
summary	We present a simulation platform to evaluate procedurally generated 3d city models with a set of agents representing urban street actors and pedestrians towards greenhouse gas emissions from transportation. Our aim is to give architects and urban planners an empiric tool to analyze, predict and quantify traffic fluctuations over time, and define the number of occupants, individual traffic and public transport in a city. In this project we show that the allocation of functions within a city is an important factor for the appearanceof traffic. The occupant’s decisions where they want to go are defined by the allocation of functions – and the distance defines the mode of transportation. We simulate the decision processes and gain information about the path, the mode of transportation, and the emissions they produce, and individual experiences like stress and effort. The autonomous driving cars are equipped with an acceleration based emission model allowing us to evaluate the inpact of jammed streets on the emission of cars.
keywords	Urban planning; Multi-agent system; Generative city model; Occupant movement; Traffic emission
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2010_196
id	ecaade2010_196
authors	Augustynowicz, Edyta; Sixt, Stefanie; Georgakopoulou, Sofia
year	2010
title	Attractive City - An Interactive City Generator
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.379-387
doi	https://doi.org/10.52842/conf.ecaade.2010.379
wos	WOS:000340629400040
summary	The Attractive City Generator is an interactive installation with which users can create or rearrange virtual cities by placing and moving physical objects. Through the set of simple inputs that the users provide and which represent city areas, landscapes or landmarks, the ACG is capable of creating complex and growing cities. In addition, a plethora of factual feedback on these cities is calculated. Becoming physically involved enhances the learningprocess and increases the user’s interest. The users are drawn to the colourful and simple interface. Due to the practical feedback that the city returns, the users can feel more attached to the city they have created. A dynamic dialogue is formed between the city and its creators, that involves the wishes of the users versus the needs of the virtual city, the practical interaction on the table versus the theoretical calculations taking place inside the computer, the physical input versus the digital output.
keywords	Interactivity; City planning; Human-computer interface; L-system; Developmental models
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia10_145
id	acadia10_145
authors	Briscoe, Danelle
year	2010
title	Information Controlled Erosion
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 145-150
doi	https://doi.org/10.52842/conf.acadia.2010.145
summary	This paper documents research of a design process that interrelates a single information model to 5-axis, waterjet cutting technology. With the intention of creating an optimized design, data is streamed through a building information model that controls geometry parametrically by a component/system relationship. At the scale of a 4’x8’ panel, material properties and pattern variability act as underlying initiators of design rather than post-rational information. In a manner uncommon to the discipline, the information model is being used as a generative tool, rather than as one for mere documentation. The research assigns a limestone wall type to the panel—a material predominantly used in areas where it is indigenous and typically desirable for its texture, color, and thermal properties. The intention is to develop potentialities through material specificity in the information model’s conceptualization. The water-jet process is then used to erode the limestone to achieve varying fields of scalar voids. In addition, the thickness of wall cladding attenuates for figuration and interest. The final stone panels transition from a rain screen system to a solar screen that modulates light, thereby linking environmental intentions to current technological capabilities. The information model is exported for analysis of daylight and structural dynamic qualities and quantities as part of the workflow. Parameters within the information model database facilitate a dimensionally controlled iterative process. Moreover, fabricating with building materials via the information model expedites a design and makes possible for materiality to move beyond merely conceptual representation.
keywords	digital fabrication, information model
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ijac20108408
id	ijac20108408
authors	Brown, Andre; Nicholas Webb
year	2010
title	Examination of the Designs by Auguste Perret Using Digitally-Enabled Forensic Techniques
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 537
summary	This paper discusses how digitally-enabled techniques can be used to augment our understanding of a designer's work, particularly in relation to unbuilt or lost projects. In the first half of the twentieth century Auguste Perret gained international recognition for his buildings and we employ two of his unbuilt museums as the basis for illustration of the technique. Current knowledge of his unbuilt projects is based on surviving literature and incomplete illustrations. We show that the use of digitally-enabled techniques facilitates a fuller examination of the original material. Interpretation of material requires parallel studies into the architect, their influences and the context they operated within in order to extrapolate and fill gaps in an informed way. The construction of various digital representations enables a forensic analysis of the projects; consequently we can produce a richer set of information that can, in turn, enhance our analysis and understanding of an architect and their work, in this case, Perret.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	acadia10_218
id	acadia10_218
authors	Chok, Kermin; Donofrio, Mark
year	2010
title	Structure at the Velocity of Architecture
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 218-226
doi	https://doi.org/10.52842/conf.acadia.2010.218
summary	This paper outlines a digital design workflow, utilized by the authors, which actively links the geometry platforms being utilized by architects with tools for structural analysis, design, form-finding, and optimization. This workflow leads to an accelerated generation and transfer of information to help guide and inform the design process. The engineering team is thus empowered to augment the architect’s design by ensuring that the design team is conscious of the structural implications of design decisions throughout the design process. A crucial element of this design process has been the dynamic linkage of parametric geometry models with structural analysis and design tools. This reduces random errors in model generation and allows more time for critical analysis evaluation. However, the ability to run a multitude of options in a compressed time frame has led to ever increasing data sets. A key component of this structural engineering workflow has become the visualization and rigorous interpretation of the data generated by the analysis process. The authors have explored visualization techniques to distill the complex analysis results into graphics that are easily discernable by all members of the design team.
keywords	Workflows, Structure, Collaboration, Visualizations, Analysis
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2010_199
id	ecaade2010_199
authors	Deng, Xiaofan; Ma, Haidong
year	2010
title	Macro Thinking & Micro Action: A digital simulation example for the southern part of Beijing, China
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.529-537
doi	https://doi.org/10.52842/conf.ecaade.2010.529
wos	WOS:000340629400057
summary	This paper aims to discuss alternative and innovative plan models for Chinese cities that are currently under rapid development. Our study considers Complexity Theories of Cities as theoretical base and applies a holistic approach in city planning by recognizing the complex nature of city. We strive to integrate the diverse local structure in social and spatial aspects with the ambition and demands of city’s expansion. Digital sequence simulation is used as an innovative tool to represent local activities, promote interventions and predict possible self-organization process in the future. The study arrives at an open scenario the feasible prospect. A conclusion is drawn to reflect the process, achievement and weakness of the research.
keywords	Local diversity; Living pattern; Industrial parameterization; Infrastructural parameterization; Sequence simulation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac20108405
id	ijac20108405
authors	Din, Edouard; Athanassios Economou
year	2010
title	Surface Symmetries: The Smith House Revisited
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 485
summary	This work proposes the use of partial order lattices along with representational schemes to account for patterns of ambiguity and emergence in the description of designs. The complexity of such designs is viewed as an aggregation of spatial layers that can all be decomposed by the subgroup relations of the symmetry of the configuration. At the end, this methodology points to a combinatorial approach that generates visual prototypes for future use in design synthesis. Here, Meier's work is just a case study that validates the group theoretical approach.
series	journal
last changed	2019/05/24 09:55

_id	acadia20_464
id	acadia20_464
authors	Elberfeld, Nathaniel; Tessmer, Lavender; Waller, Alexandra
year	2020
title	A Case for Lace
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 464-473.
doi	https://doi.org/10.52842/conf.acadia.2020.1.464
summary	Textiles and architecture share a long, intertwined history from the earliest enclosures to contemporary high-tech tensile structures. In the Four Elements of Architecture, Gottfried Semper (2010) posited wickerwork and carpet enclosures to be the essential origins of architectural space. More recently, architectural designers are capitalizing on the characteristics of textiles that are difficult or impossible to reproduce with other material systems: textiles are pliable, scalable, and materially efficient. As industrial knitting machines join robotic systems in architecture schools with fabrication- forward agendas, much of the recent developments in textile-based projects make use of knitting. In this paper, we propose an alternative textile technique, lacemaking, for architectural fabrication. We present a method for translating traditional lacemaking techniques to an architectural scale and explore its relative advantages over other textiles. In particular, we introduce bobbin lace and describe its steps both in traditional production and at an architectural scale. We use the unique properties of bobbin lace to form workflows for fabrication and computational analysis. An example of computational analysis demonstrates the ability to optimize lace-based designs towards particular labor objectives. We discuss opportunities for automation and consider the broader implications of understanding a material system relative to the cost of labor to produce designs using it.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

For more results click below: