Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 450

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2010_140
id	ecaade2010_140
authors	Chronis, Angelos; Liapi, Katherine A.
year	2010
title	Parametric Approach to the Bioclimatic Design of a Student Housing Building in Patras, Greece
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.313-319
doi	https://doi.org/10.52842/conf.ecaade.2010.313
wos	WOS:000340629400033
summary	A new housing complex on the Campus of the University of Patras, Greece, is expected to serve as a test-bed for experimentation with a parametric design process that integrates significant climatic data. To optimize the environmental performance of the proposed housing complex a parametric design algorithm has been developed. The algorithm links the weather data in the area with the site topography and the basic geometric features of the buildings on the site. To explore the interaction of the building features with the prevailing winds in the area and the solar exposure throughout the year various software applications, including computational fluid dynamics (CFD) simulations, have been utilized. The inclusion of wind data in the algorithm renders it particularly effective. The developed parametric process has been useful during the early design phase when studies on various patterns for arranging the buildings on the site were conducted. The parametric process has facilitated the configuration of the typical building block as well.
keywords	Bioclimatic design; Parametric design; Design algorithms; Sun control; Wind analysis; CFD in building design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2021_110
id	caadria2021_110
authors	Bao, Ding Wen, Yan, Xin, Snooks, Roland and Xie, Yi Min
year	2021
title	SwarmBESO: Multi-agent and evolutionary computational design based on the principles of structural performance
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 241-250
doi	https://doi.org/10.52842/conf.caadria.2021.1.241
summary	This paper posits a design approach that integrates multi-agent generative algorithms and structural topology optimisation to design intricate, structurally efficient forms. The research proposes a connection between two dichotomous principles: architectural complexity and structural efficiency. Both multi-agent algorithms and Bi-directional evolutionary structural optimisation (BESO) (Huang and Xie 2010), are emerging techniques that have significant potential in the design of form and structure.This research proposes a structural behaviour feedback loop through encoding BESO structural rules within the logic of multi-agent algorithms. This hybridisation of topology optimisation and swarm intelligence, described here as SwarmBESO, is demonstrated through two simple structural models. The paper concludes by speculating on the potential of this approach for the design of intricate, complex structures and their potential realisation through additive manufacturing.
keywords	Swarm Intelligence; Multi-agent; BESO (bi-directional evolutionary structural optimisation); Intricate Architectural Form; Efficient Structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac20108205
id	ijac20108205
authors	Holzer, Dominik
year	2010
title	Optioneering in Collaborative Design Practice
source	International Journal of Architectural Computing vol. 8 - no. 2, 165-182
summary	The discourse about computational support of collaborative architectural design has in recent years mainly focused on the topic of Building Information Modeling (BIM). In this paper, the method of ‘optioneering’ is presented that, in contrast to current BIM capabilities, assists designers and consultants to resolve design problems through integrated analyses across disciplines in the early stages of design. Although the method of ‘optioneering’ has only recently been adapted in building practice, it has been preceded by manifold efforts by researchers in the field of design and computation over the past two decades.At the end of this paper the computational framework ‘DesignLink’ will be discussed.‘DesignLink’ supports ‘optioneering’ in the design stages before BIM becomes effective and it is currently being developed and used to support performance optimisation of building projects in practice.
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_018
id	caadria2010_018
authors	Schoch, M.; A. Praditsmanont and C. Prakasvudhisarn
year	2010
title	Shaping building volumes through life cycle costs: a constraint programming approach for building volume optimisation
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 185-194
doi	https://doi.org/10.52842/conf.caadria.2010.185
summary	Due to a general freedom in the architectural design process, a wide range of possible alternatives exist; although building-volume designs must also continue to meet numerous, possibly conflicting design requirements originating from various related disciplines. This research addresses problems associated with missing quantitative design aids during the early design stages. It aims to provide designers with solutions that provide optimal cost-effectiveness. The demonstrated building-volume optimisation model minimises life cycle costs by determining optimal-volume dimensions, floor number, building orientation and ‘window / wall’ opening ratios while satisfying site and building code regulations and design constraints. Results indicate an optimal solution can be found within a practical timeframe. The proposed, novel approach to introduce cost objectives into building-volume design provides designers with a valuable decision support tool in a design domain that is known to be complex owing to multiple design criteria and constraint influences.
keywords	Decision support; design optimisation; building volume design; life cycle costs and constraint-based design
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	caadria2010_039
id	caadria2010_039
authors	Yeung, W. and J. Harkins
year	2010
title	Digital architecture for humanitarian design: a case study of applying digital technologies in post-disaster reconstruction
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 413-422
doi	https://doi.org/10.52842/conf.caadria.2010.413
summary	This paper describes the context and proposal for applying digital technology in humanitarian design for remote areas of developing countries that are the most technologically challenged. It presents a case study of on-going post-disaster reconstruction in the Solomon Islands. A system of digital tools, in particular parametric modelling, was devised to optimise the exemplar design for site and project specific needs, and reduce time and cost required in the overall design and construction process. Shelters developed under this system will start construction in 2010.
keywords	Optimisation of design; parametric design; post-disaster; algorithmic modelling; developing countries
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_040
id	ecaade2010_040
authors	Akdag, Suzan Girginkaya; Cagdas, Gulen; Guney, Caner
year	2010
title	Analyzing the Changes of Bosphorus Silhouette
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.815-823
doi	https://doi.org/10.52842/conf.ecaade.2010.815
wos	WOS:000340629400087
summary	Due to improving technology and global competition today sky is the only limit for high towers of metropolitan areas. The increase in number of high rise has been ruining the silhouette of cities all over the world like Istanbul, whose identity and image have also been destroyed by skyscrapers dominating the seven slopes on which it was once built. The urbanization in Istanbul has somehow become homogenous and destructive over the topography. Despite of raising debates on the critical issue now and then, no analytical approach has ever been introduced. The research therefore, aims to analyze the change of Bosphorus silhouette caused by the emergence of high rise blocks in Zincirlikuyu-Maslak route since it was defined as a Central Business District and a high rise development area by Bosphorus Conservation Law in 1991. ArcGIS Desktop software and its analyst extensions are used for mapping, analyzing and evaluating the urban development within years. The application is considered to be the initial step for a decision support system which will assist in assigning ground for high rise buildings in Istanbul.
keywords	GIS; Bosphorus; Silhouette analysis; High rise buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2010_189
id	ascaad2010_189
authors	Allahaim, Fahad; Anas Alfaris and David Leifer
year	2010
title	Towards Changeability
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 189-200
summary	Many buildings around the world have undergone successive changes over their life cycles. Regardless of the type or size of a building there are usually requirements for change due to several unanticipated forces and emerging uncertainties that act upon them. These changes might be in the building’s spatial, structural or service systems. This can be due to changes in the needs of occupants, the market demand or technological advances. Although buildings undergo change, current design practice does not address this and buildings are still designed as if they will remain static. This paper proposes an Adaptable Buildings Design (ABD) Framework to address the issue of adaptability in building design. Using this methodology uncertainties and future changes are first identified. To increase the building’s longevity, flexibility options are embedded and design rules are formulated to trigger these options when necessary. The value of adaptability is then assessed by implementing several simulations using Real Options Analysis (ROA). To demonstrate the approach, the ABD is applied to a multi-use commercial building case study. Flexibility is embedded in the building’s design across several systems allowing it to change and evolve over time based on a set of design rules. The buildings adaptability is then assessed using ROA. Positive results demonstrate the strength of the proposed methodology in addressing future change and uncertaintie.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ijac20108202
id	ijac20108202
authors	Apollonio, Fabrizio I.; Cristiana Corsi, Marco Gaiani, Simone Baldissini
year	2010
title	An Integrated 3D Geodatabase for Palladio's Work
source	International Journal of Architectural Computing vol. 8 - no. 2, 111-133
summary	The paper presents a novel digital 3D GIS web-based system entirely founded on Google Earth, built to offer a deep insight into Palladio's opera for restitution of its architectural surveys, reconstruction for historical reasons, analysis for structural and other options, and assembly and presentation of all certified Palladian documentation.The development of the application follows the philosophy of visual computing and it is based on an architectural knowledge representation.The information system is conceived as a typical Rich Internet Application and it is based on the digitalization of the complete Palladian corpus documentation implemented by the Centro Internazionale di Studi di Architettura Andrea Palladio (CISAAP).The 3D geodatabase system is, actually, in use at the Centro as the Palladian information system for researchers and in two expositions at Barbaran da Porto Palace in Vicenza, and at Villa Poiana at Poiana Maggiore, where is widely used by tourists for virtual visits to Palladian buildings.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_114
id	ecaade2010_114
authors	Apollonio, Fabrizio I.; Gaiani, Marco; Corsi, Cristiana
year	2010
title	A Semantic and Parametric Method for 3D Models used in 3D Cognitive-Information System
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.863-872
doi	https://doi.org/10.52842/conf.ecaade.2010.863
wos	WOS:000340629400092
summary	The paper presents an innovative semantic and parametric method to build 3D models to be used in cognitive-information systems. We integrated structured geometrical and documentary information resulting from multiple sources with the aim to enhance the knowledge of those sites within the frame of their historical evolution and their institutional management in a 3D GIS/DB. The developed applications were designed for different types of users, with a largely scalable interface, able to support different output devices and to work at different levels of iconicity. The system allows a full comprehension of the buildings in their own context, permitting to discover unknown relationships, to evaluate their architectural occupancy and to quickly access a complex system of information.
keywords	3D-GIS; Semantic modeling; 3D reality-based modeling; Real-time rendering; Virtual heritage
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2010_213
id	ascaad2010_213
authors	Babsail, Mohammad; Mahjoub Elnimeiri
year	2010
title	A Computer Process for Investigating Wind Power Production in Building Integrated Wind Turbines
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 213-220
summary	This paper reports on the computer process to be used in an ongoing research to investigate the effect of architectural parameters of tall buildings on the incorporation of wind turbines. The process combines a generative modeling tool (Grasshopper) and a performance based CFD tool (Virtualwind). The process is demonstrated on three typical tall building plan configurations. The wind speed was simulated at certain locations to demonstrate the ability of tall buildings to enhance the wind speed and thus maximize the energy produced by wind turbines located between twin towers. The process to predict wind power production is lastly listed.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2010_000
id	ascaad2010_000
authors	Bennadji, Amar; Bhzad F. Sidawi & Rabee M. Reffat (eds.)
year	2010
title	CAAD - Cities - Sustainability
source	5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010)[ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, 361 p.
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impacts on our today’s buildings and cities. The 5th international ASCAAD conference invited academics, researchers and professionals interested in CAAD concepts applications on the built environment to join and contribute to the debate on learned lessons from the past and present impacts of CAAD on buildings and cities around the world along with the potential future from a CAAD perspective.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_145
id	acadia10_145
authors	Briscoe, Danelle
year	2010
title	Information Controlled Erosion
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 145-150
doi	https://doi.org/10.52842/conf.acadia.2010.145
summary	This paper documents research of a design process that interrelates a single information model to 5-axis, waterjet cutting technology. With the intention of creating an optimized design, data is streamed through a building information model that controls geometry parametrically by a component/system relationship. At the scale of a 4’x8’ panel, material properties and pattern variability act as underlying initiators of design rather than post-rational information. In a manner uncommon to the discipline, the information model is being used as a generative tool, rather than as one for mere documentation. The research assigns a limestone wall type to the panel—a material predominantly used in areas where it is indigenous and typically desirable for its texture, color, and thermal properties. The intention is to develop potentialities through material specificity in the information model’s conceptualization. The water-jet process is then used to erode the limestone to achieve varying fields of scalar voids. In addition, the thickness of wall cladding attenuates for figuration and interest. The final stone panels transition from a rain screen system to a solar screen that modulates light, thereby linking environmental intentions to current technological capabilities. The information model is exported for analysis of daylight and structural dynamic qualities and quantities as part of the workflow. Parameters within the information model database facilitate a dimensionally controlled iterative process. Moreover, fabricating with building materials via the information model expedites a design and makes possible for materiality to move beyond merely conceptual representation.
keywords	digital fabrication, information model
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ijac20108408
id	ijac20108408
authors	Brown, Andre; Nicholas Webb
year	2010
title	Examination of the Designs by Auguste Perret Using Digitally-Enabled Forensic Techniques
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 537
summary	This paper discusses how digitally-enabled techniques can be used to augment our understanding of a designer's work, particularly in relation to unbuilt or lost projects. In the first half of the twentieth century Auguste Perret gained international recognition for his buildings and we employ two of his unbuilt museums as the basis for illustration of the technique. Current knowledge of his unbuilt projects is based on surviving literature and incomplete illustrations. We show that the use of digitally-enabled techniques facilitates a fuller examination of the original material. Interpretation of material requires parallel studies into the architect, their influences and the context they operated within in order to extrapolate and fill gaps in an informed way. The construction of various digital representations enables a forensic analysis of the projects; consequently we can produce a richer set of information that can, in turn, enhance our analysis and understanding of an architect and their work, in this case, Perret.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	ecaade2010_184
id	ecaade2010_184
authors	Celani, Gabriela; Medrano, Leandro
year	2010
title	Schemas and Rules in the Design Process: A Case Study
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.305-312
doi	https://doi.org/10.52842/conf.ecaade.2010.305
wos	WOS:000340629400032
summary	The present paper describes the design process of a new prototypical building for the State University of Campinas, with the use of shape schemata and rules. The use of this construct or method made the design process more intelligible for the students who took part in the project and helped managing the team work. We expect that these rules will also allow the automation of the production of design alternatives and construction drawings for new buildings in the campus.
keywords	Design process; Shape grammar; Rules; Schemata; Standard design system
series	eCAADe
email
last changed	2022/06/07 07:55

_id	9eef
id	9eef
authors	Christenson, Mike
year	2010
title	Registering visual permeability in architecture: Isovists and occlusion maps in AutoLISP
source	Environment and Planning B: Planning and Design 37(6): 1128–1136
summary	In this paper the design and execution of a simple AutoLISP routine for generating a map of plan isovists (in the sense of Benedikt) are discussed. Such a plan field of isovists is a registration of visibility from multiple station points within and around a building. More precisely, the plan field records the cumulative effect, over a spatial matrix, of occluded vision of a distant horizon. Thus, the plan field is termed an occlusion map. An occlusion map registers the effect which an observer's position in space has on their perception of architecture's visual permeability. Occlusion maps are shown here to be an important tool for comparing existing buildings in a historical sense and also as an effective design tool, particularly when an addition to an existing building is being contemplated, as an addition invariably affects the visual permeability of its host.
keywords	AutoLISP, visibility, isovist
series	journal paper
type	normal paper
email
more	doi:10.1068/b36076
last changed	2011/04/13 16:58

_id	ecaade2010_193
id	ecaade2010_193
authors	Dillenburger, Benjamin
year	2010
title	Space Index: A retrieval-system for building-plots
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.893-899
doi	https://doi.org/10.52842/conf.ecaade.2010.893
wos	WOS:000340629400095
summary	Increasingly, digital architectural data will become available through information technology. Yet until now, there were no satisfying methods to query this data for architectural purposes. This paper introduces an information retrieval system for parcels that not only allows searching for specific attributes, but also includes properties of shape and context of the building plots. An automatically generated index stores the relevant spatial properties as normalized bitmap images on several layers. When a query is started, only this index has to be queried and not the complete database. The search process can be controlled through a graphical interface that incorporates the user’s sketches. The retrieved parcels are presented as a sorted list of vector drawings including their contained buildings. With the simplified access to these case-studies, quality and efficiency of the architectural design process could be increased.
keywords	Architecture-retrieval; Shape matching; Indexing; Operationalization; Urban morphology; Case-based reasoning
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2010_053
id	ecaade2010_053
authors	Felasari, Sushardjanti; Peng, Chengzhi
year	2010
title	Enhancing A Virtual City with Collective Memory: A pilot study of Jalan Malioboro in Yogyakarta
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.825-831
doi	https://doi.org/10.52842/conf.ecaade.2010.825
wos	WOS:000340629400088
summary	The paper reports on a pilot study of how a virtual city can be enhanced by interlinking elements of the 3D city model with the city’s collective memory represented in various digital formats. A particular street called Jalan Malioboro in Yogyakarta Indonesia has been modeled and hosted on Google Earth. Through the questionnaires returned by the participating students, we also investigate how collective memory enhanced virtual city (CREATI) could help learners to achieve goals of a particular course. The study shows that CREATI helps students to analyze the task given by providing more historical information related to the street. However it also needs further refinement and evaluation by introducing more interactive features such as enabling students to upload their own design proposals and to post additional information related to the buildings or places.
keywords	City modeling; Collective memory; Virtual city; Google Earth; Architectural and urban design; Jalan Malioboro; e-Learning
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: