Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 244

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	9eef
id	9eef
authors	Christenson, Mike
year	2010
title	Registering visual permeability in architecture: Isovists and occlusion maps in AutoLISP
source	Environment and Planning B: Planning and Design 37(6): 1128–1136
summary	In this paper the design and execution of a simple AutoLISP routine for generating a map of plan isovists (in the sense of Benedikt) are discussed. Such a plan field of isovists is a registration of visibility from multiple station points within and around a building. More precisely, the plan field records the cumulative effect, over a spatial matrix, of occluded vision of a distant horizon. Thus, the plan field is termed an occlusion map. An occlusion map registers the effect which an observer's position in space has on their perception of architecture's visual permeability. Occlusion maps are shown here to be an important tool for comparing existing buildings in a historical sense and also as an effective design tool, particularly when an addition to an existing building is being contemplated, as an addition invariably affects the visual permeability of its host.
keywords	AutoLISP, visibility, isovist
series	journal paper
type	normal paper
email
more	doi:10.1068/b36076
last changed	2011/04/13 16:58

_id	ecaade2010_193
id	ecaade2010_193
authors	Dillenburger, Benjamin
year	2010
title	Space Index: A retrieval-system for building-plots
doi	https://doi.org/10.52842/conf.ecaade.2010.893
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.893-899
summary	Increasingly, digital architectural data will become available through information technology. Yet until now, there were no satisfying methods to query this data for architectural purposes. This paper introduces an information retrieval system for parcels that not only allows searching for specific attributes, but also includes properties of shape and context of the building plots. An automatically generated index stores the relevant spatial properties as normalized bitmap images on several layers. When a query is started, only this index has to be queried and not the complete database. The search process can be controlled through a graphical interface that incorporates the user’s sketches. The retrieved parcels are presented as a sorted list of vector drawings including their contained buildings. With the simplified access to these case-studies, quality and efficiency of the architectural design process could be increased.
wos	WOS:000340629400095
keywords	Architecture-retrieval; Shape matching; Indexing; Operationalization; Urban morphology; Case-based reasoning
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2010_029
id	ecaade2010_029
authors	Germen, Murat; Kavlak, Emrah
year	2010
title	Future Users, Future Cities: Dweller as Designer
doi	https://doi.org/10.52842/conf.ecaade.2010.057
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.57-64
summary	As technology advances, users get more detached from the way things work and are produced. Users end up being pure consumers and leave their positions as decision makers behind. Before the architecture and buildings processes were industrialized, most practitioners of the so-called vernacular architecture were in fact the dwellers of what they built and they easily met the specific personal needs since they were in total control. Some “architectural theorists have turned to vernacular construction with the conviction that such buildings and settlements express the interconnectedness between humans and the landscapes they live in.” (Beesley and Bonnemaison 2008). Considering the present day intense building activity, such relationship of dweller and architecture seems not possible excepting a very few examples to later referred to. This paper will instead focus on the possibility of the non-architect users of architectures as decision makers in order to reach designs that meet the requirements of their addressees.
wos	WOS:000340629400005
keywords	User driven architecture; Architecture without architects; Architecture as interface; Sustainability; User involvement
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ascaad2010_249
id	ascaad2010_249
authors	Hawker, Ronald; Dina Elkady and Thomas Tucker.
year	2010
title	Not Just Another Pretty Face
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 249-260
summary	Digital Heritage has gained popularity recently as means of dynamically representing and reconstructing historic buildings and cityscapes. Simultaneously this new medium of visualization affords another approach to examine human-virtual environment interaction and offers possibilities of exploiting virtual environments as educational tools. At Zayed University, a federal university primarily for women citizens of the United Arab Emirates, we have integrated student-faculty research and documented and reconstructed a number of historical buildings within the curriculum of the Department of Art and Design. We have further collaborated with the animation program at Winston Salem State University in North Carolina, utilizing the motion capture laboratory at the Center of Design Innovation to literally breathe life into these reconstructions. The primary idea is to contribute to the ongoing documentation of the country’s heritage through creating “responsive virtual heritage environments” where the spectator is actively engaged in exploring the digital space and gain certain degrees of control over the course and scheme of the dynamic experience. The process begins by introducing students to utilize the diverse capabilities of CAD and three dimensional computer applications and intertwine the technical skills they acquire to construct virtual computer models of indigenous built environments. The workflow between the different applications is crucial to stimulate students’ problem solving abilities and tame the application tools, specifically when constructing complex objects and structural details. In addition the spatial and temporal specificity different computer applications afford has proven useful in highlighting and analyzing the buildings’ function within the extreme climate of the country and their role in the political-economy, particularly in visualizing the ephemeral qualities of the architecture as they relate to passive cooling and the inter-relationships between built and natural environments. Light and time settings clarify shadow casting and explain the placement and orientation of buildings. Particle simulations demonstrate the harnessing of wind and rain both urban and rural settings. The quantitative data accumulated and charted through CAD and VR programs and geo-browsers can be integrated with qualitative data to create a more holistic analytical framework for understanding the complex nature of past settlement patterns. In addition, the dynamic nature of this integration creates a powerful educational tool. This paper reviews this ongoing research project with examples of reconstructions completed across the country, demonstrating analytical and educational possibilities through the integration of CAD programs with a range of other statistical, geographic, and visualization software.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2010_158
id	ecaade2010_158
authors	Kuo, Jeannette; Zausinger, Dominik
year	2010
title	Scale and Complexity: Multi-layered, multi-scalar agent networks in time-based urban design
doi	https://doi.org/10.52842/conf.ecaade.2010.651
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.651-657
summary	Urban design, perhaps even more than architecture, is a timedependent discipline. With its multi-layered complexities, from individual buildings to entire regions, decisions made at one level, that may not show effect immediately, may prove to have disastrous consequences further down the line. The need to incorporate time-based simulations in urban modeling, and the demand for a means of evaluating the changes have led to explorations with multi-agent systems in computation that allow for decisions to be decentralized. From the first basic rule-based system of Conway’s Game of Life [1] to recent urban simulations developed at institutions like the ETH Zurich [2], or UCL CASA [3], these programs synthesize the various exigencies into complex simulations so that the designer may make informed decisions. It is however not enough to simply use parametrics in urban design. Rules or desires implemented at one scale may not apply to another, while isolating each scalar layer for independent study reverts to the disjunctive and shortsighted practices of past planning decisions. Central to current parametric research in urban design is the need to deal with multiple scales of urbanism with specific intelligence that can then feed back into the collective system: a networked parametric environment. This paper will present the results from a city-generator, developed in Processing by Dino Rossi, Dominik Zausinger and Jeannette Kuo, using multiagent systems that operate interactively at various scales.
wos	WOS:000340629400070
keywords	Agent-based modeling; Cellular automata; Parametric urbanism; Neural network; Complexity; Genetic algorithm; Urban dynamics
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20108101
id	ijac20108101
authors	Phan, Viet Toan; Seung Yeon Choo
year	2010
title	Augmented Reality-Based Education and Fire Protection for Traditional Korean Buildings
source	International Journal of Architectural Computing vol. 8 - no. 1, 75-91
summary	This study examines an application of Augmented Reality technology (AR) for Korean Cultural Traditional Buildings, specifically, the Namdaemun Gate, "National Treasure No 1" of the Republic of Korea. Unfortunately, in February 2008, the Namdaemun Gate burned down, despite the efforts of many firemen, as the main difficulty was getting the fire under control without any structural knowledge of the wooden building. Hence, with the great advances in digital technology, an application of virtual technical information to traditional buildings is needed, and the new technology of AR offers many such advantages for digital architectural design and construction fields. While AR is already being considered as new design approach for architecture, outdoor AR is another practical application that can take advantage of new wearable computer equipment (Head-mounted display also know as HMD, position and orientation sensors, and mobile computing) to superimpose virtual graphics of traditional buildings (in this case, Namdaemun Gate) in a real outdoor scene. Plus, outdoor AR also allows the user to move freely around and inside a 3D virtual construction, thereby offering important training opportunities, for example, specific structural information in the case of firemen and mission planning in the case of a real-life emergency. In this example, the proposed outdoor AR system is expected to provide important educational information on traditional wooden building for architects, archaeologists, and engineers, while also assisting firemen to protect such special buildings.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_023
id	ecaade2010_023
authors	Rafi, Ahmad; Salleh, Azhar; Paul, Avijit; Maulana, Reza; Athar, Faisal; Pratiniyata, Gatya
year	2010
title	e-Warisan SENIBINA: Towards a collaborative architectural virtual heritage experience
doi	https://doi.org/10.52842/conf.ecaade.2010.739
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.739-746
summary	This research introduces the concepts of virtual heritage in the field of architecture. It then continues with the fundamentals of virtual heritage (VH) metadata structure adopted from the UNESCO guidelines. The key highlights to the content of e-Warisan SENIBINA will be demonstrated via techniques to reconstruct heritage buildings towards a collaborative architectural virtual heritage experience as closely to originally design features. The virtual reconstruction will be based on the techniques suggested by the research team tested earlier in a smaller scale of advanced lighting technique for virtual heritage representations. This research will suggest (1) content preparation for creating collaborative architectural heritage, (2) effective low-polygon modelling solutions that incorporate global illumination (GI) lighting for real-time simulation and (3) texturing techniques to accommodate reasonable detailing and give the essence of the VH.
wos	WOS:000340629400079
keywords	Simulation; Virtual heritage; Virtual reality; Collaborative environment; Realistic lighting
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2010_110
id	ecaade2010_110
authors	Santo, Yasu; Frazer, John Hamilton; Drogemuller, Robin
year	2010
title	Co-Adaptive Environments: Investigation into computer and network enhanced adaptable, sustainable and participatory environments
doi	https://doi.org/10.52842/conf.ecaade.2010.677
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.677-686
summary	This paper presents research in response to environmental concerns we face today. In a search for a better method to manage spaces and building resources consumed excessively through traditional top-down architectural solutions, the research began by speculating that the building spaces and resources can be managed by designing architectural systems that encourage a bottom-up approach. In other words, this research investigates how to design systems that encourage occupants and users of buildings to actively understand, manage and customise their own spaces. Specific attention is paid to the participation of building users because no matter how sophisticated the system is, the building will become as wasteful as conventional buildings if users cannot, or do not want to, utilise the system effectively. The research is still in its early stages. The intension of this paper is to provide a background to the issue, discuss researches and projects relevant to, but not necessarily about, architecture, and introduce a number of hypothesis and investigations to realise adaptable, participatory and sustainable environments for users.
wos	WOS:000340629400073
keywords	Adaptive; Interactive; Participatory; Tangible; Ubiquitous
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2010_000
id	ecaade2010_000
authors	Schmitt, Gerhard; Hovestadt, Ludger; Van Gool, Luc; Bosché, Frédéric; Burkhard, Remo; Colemann, Suzanne; Halatsch, Jan; Hansmeyer, Michael; Konsorski-Lang, Silke; Kunze, Antje; Sehmi-Luck, Martina (eds.)
year	2010
title	FUTURE CITIES
doi	https://doi.org/10.52842/conf.ecaade.2010
source	28th eCAADe Conference Proceedings [ISBN 978-0-9541183-7-2], ETH Zurich (Switzerland) 15-18 September 2010, 904 p.
summary	Future Cities – the title of the 2010 eCAADe Conference describes one of the major challenges of the 21st century. The conference theme is a logical evolution from previous years in that it expands the focus of interest from the building to larger scales and higher complexity. The conference contributions describe methods and instruments that were developed in the last three decades and apply them to city and territorial planning. The eCAADe proceedings demonstrate that CAAD research and education of the past prepared the ground for the future and for the increased responsibility of the CAAD community. The population of cities has developed worldwide from a minority to the majority. Cities are the largest, most complex and most dynamic man-made systems. As vibrant centres of cultural life and of mega events, they are engines that drive local and global economies. However, their growth was in the fewest cases determined by sustainability goals. As a result, contemporary metropolitan territories are often environmentally, socially and economically unsustainable entities placing increasing pressure on the surrounding rural areas. No longer do traditional methods support the planning and managing of large cities – these methods have reached their limits. Parallel to the revolution in the design of buildings, we need a radical re-thinking of the planning, design, development and management process of cities and urban-rural systems. Compared to buildings, urban and rural systems involve a much higher number of stakeholders and decision makers. We need to study and simulate the effects and side effects of urban-rural planning or re-development much earlier in the process than normally done today. The goal seems clear: the transformation of existing and the planning of new sustainable urban-rural systems. As ordering principles we can build on experiences with building architecture. Complexity, dynamics, scale, and the urban metabolism evolve as promising research and education areas.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2010_130
id	ecaade2010_130
authors	Sdegno, Alberto
year	2010
title	Digital Simulation of the City for Three Millions Inhabitants by Le Corbusier: Geometrical analysis, electronic reconstruction and video animation
doi	https://doi.org/10.52842/conf.ecaade.2010.549
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.549-556
summary	The research that is presented describes the geometrical analysis and the digital reconstruction of one of the most important designs by Le Corbusier: the City of Three Millions Inhabitants; it represents one of the most impressive solutions of the idea of Future City done during the XX Century, and a lot of its architectural elements are now part of contemporary buildings. The aim of the research was to understand the main morphological aspects of it and compare the different solutions made by the author during his life, starting from the first public presentation in occasion of the Salon d’Automne in Paris (1922) and to reconstruct the 3D digital realistic-textured model of it, in order to realize the video that describes the whole project of the city; the research was done at the Faculty of Architecture of the IUAV University of Venice.
wos	WOS:000340629400059
keywords	Le Corbusier; Urban design; Digital reconstruction; Simulation; Video
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2010_351
id	sigradi2010_351
authors	Stumpp, Monika Maria; Elísia da Costa Ana; Radunz Roberto; Pinheiro Machado Maria Beatriz
year	2010
title	Patrimônio e mídia interativa: as residências modernas na Serra Gaúcha_Brasil [Heritage and interactive media: moder homes at Serra Gaucha in Brazil]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 351-354
summary	This article presents the results of a study that is being carried out at the University of Caxias do Sul, Brazil. The goal of the study is to publicize a collection of the modern architecture in southern Brazil through interactive media on a web portal. This study presents the development of a digital media to publicize a collection composed of single - family houses, for a total of two - hundred - and - fifteen residences that are organized by city and decade, from 1930 to 1970. The buildings of each decade are analyzed in terms of their language and compositional features. It also presents brief biographies of the architects, engineers and builders involved in the construction.
keywords	cultural heritage, hypermedia, modern residences
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	acadia10_327
id	acadia10_327
authors	Vassigh, Shahin; Herrera, Silvana
year	2010
title	Interactive Teaching through Simulation Environments
doi	https://doi.org/10.52842/conf.acadia.2010.327
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 327-332
summary	Spurring new and innovative building design will be critical to the urban energy and economic future of the nation. The operation of completed buildings account for 48% of the nation’s annual greenhouse gas emissions, and 76% of all electricity generated by U.S. power plants goes to supply the building sector. Therefore developing and applying new and innovative sustainable building design will have a measurable impact on the environment. Recent studies show sustainable building design is closely linked to system integration, where various components of a building work in confluence to produce synergetic benefits. As a result, a critical component of sustainable design involves a clear understanding of building systems operation, interaction, and the selection parameters. A consideration of suitable building systems, gauging their interaction, and proposing well integrated systems can lead to producing efficient models of sustainable buildings with minimal impact on the environment. The following paper outlines the progress on a project entitled “Building Literacy: the Integration of Building Technology and Design in Architectural Education.” The project develops a digital tool for teaching/learning architectural technology from an integrated systems perspective. The project attempts to immerse students in a simulated environment that is based on the real life practice of architecture. The project accomplishes this by harnessing the capabilities of simulation and dynamic modeling programs, as well as the state of art graphic media, to create compelling and rewarding reasons for students’ engagement in the lear ning process. The project involves a multidisciplinary team of faculty from Florida International University, University at Buffalo the State University of New York, and Iowa State University and is funded by the US Department of Education for the period of 2007-2011.
keywords	educational software, interactive learning, interactive teaching, simulation programs, building performance, building integrated systems,
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	caadria2010_003
id	caadria2010_003
authors	Vaughan, Josephine and Michael J. Ostwald
year	2010
title	Refining a computational fractal method of analysis: testing Bovill’s architectural data
doi	https://doi.org/10.52842/conf.caadria.2010.029
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 29-38
summary	In 1996 Bovill applied Mandelbrot’s fractal method for calculating the approximate visual complexity of images to architecture. This method is one of only a limited number of quantifiable approaches to provide a measure of the relative complexity of an architectural form. However, the method has rarely been tested despite many scholars uncritically repeating Bovill’s conclusions. While Bovill’s original work was calculated manually, a software program, Archimage, is presently being developed by the authors as a tool to assist architectural designers and researchers to understand the visual complexity of building designs. The present research returns to Bovill’s original architectural data (elevations of famous buildings) and re-calculates the results published therein using Archimage and the commercial software Benoit. These results are then compvared with those produced by Bovill (1996) and Lorenz (2003), to determine if any consistency can be found between the sets. The level of consistency will assist in determining the validity of Bovill’s method and provide important data in the ongoing process to refine the Archimage software and the analytical method.
keywords	Computational analysis tools; design analysis; visual complexity
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2011_093
id	ecaade2011_093
authors	Veliz, Alejandro; Sills, Pablo
year	2011
title	Digital design of reconstruction proposals in Chile
doi	https://doi.org/10.52842/conf.ecaade.2011.673
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.673-678
summary	After the earthquake and tsunami occurred in Chile on February 27th 2010, the Technical University Federico Santa Maria was asked to contribute with reconstruction proposals for the commercial infrastructure destroyed in the town “San Juan Bautista”. Located 600 km (~370 mi) away from the continent, this town is not just the home of several endemic species, but is also located next to a National Protected Area and UNESCO Biosphere Reserve. Within this context, the design problem consisted on the development of a component-based strategy and prefabrication requirements, and to reduce to the minimum the implied logistics and environmental impacts of the new buildings. With a Studio of 23 final year students and the support of the Architecture Firms Association, 11 projects were developed using digital tools such as visual programming and digital fabrication. Finally, technical documentation was produced and delivered to the local and government authorities.
wos	WOS:000335665500078
keywords	Visual programming; post-disaster reconstruction; prefabrication; constraintbased design; building components
series	eCAADe
email
last changed	2022/05/01 23:21

_id	lasg_hylozoicground_2010_fulltext
id	lasg_hylozoicground_2010_fulltext
year	2010
title	Hylozoic Ground; Liminal Responsive Architecture
source	Hylozoic Ground; Liminal Responsive Architecture [ISBN 978-1-926724-02-7] Riverside Architectural Press: Toronto, Canada 2010.
summary	Introductory summary of developing Hylozoic Series, a collection of life-like architectural structures
keywords	Hylozoism, Hylozoic series, components, assemblies, design process
last changed	2019/07/29 14:00

_id	ecaade2010_171
id	ecaade2010_171
authors	Achten, Henri; Kopriva, Milos
year	2010
title	A Design Methodological Framework for Interactive Architecture
doi	https://doi.org/10.52842/conf.ecaade.2010.169
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.169-177
summary	Interactive architecture is a fairly recent phenomenon enabled through new materials and technologies. Through experimentation architects are coping with questions of changeability, adaptability, and interaction. However, there are no comprehensive design methods to support this type of architecture. In this paper we aim to bring together methods that can support the design of interactive architecture. The methods are ordered in a methodological framework that provides an overview of possible approaches.
wos	WOS:000340629400018
keywords	Design methods; Interactive architecture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

For more results click below: