Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 396

Reformat results as: short short into frame detailed detailed into frame

_id	acadia10_103
id	acadia10_103
authors	Flöry, Simon; Pottmann, Helmut
year	2010
title	Ruled Surfaces for Rationalization and Design in Architecture
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 103-109
doi	https://doi.org/10.52842/conf.acadia.2010.103
summary	In this work, we address the challenges in the realization of free-form architecture and complex shapes in general with the technical advantages of ruled surfaces. We propose a geometry processing framework to approximate (rationalize) a given shape by one or multiple strips of ruled surfaces. We discuss techniques to achieve an overall smooth surface and develop a parametric model for the generation of curvature continuous surfaces composed of ruled surface strips. We illustrate the usability of the proposed process at hand of several projects, where the pipeline has been applied to compute NC data for mould production and to rationalize large parts of free-form facades.
keywords	geometry processing; architectural geometry; ruled surface; strip model; surface fitting
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2010_189
id	ascaad2010_189
authors	Allahaim, Fahad; Anas Alfaris and David Leifer
year	2010
title	Towards Changeability
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 189-200
summary	Many buildings around the world have undergone successive changes over their life cycles. Regardless of the type or size of a building there are usually requirements for change due to several unanticipated forces and emerging uncertainties that act upon them. These changes might be in the building’s spatial, structural or service systems. This can be due to changes in the needs of occupants, the market demand or technological advances. Although buildings undergo change, current design practice does not address this and buildings are still designed as if they will remain static. This paper proposes an Adaptable Buildings Design (ABD) Framework to address the issue of adaptability in building design. Using this methodology uncertainties and future changes are first identified. To increase the building’s longevity, flexibility options are embedded and design rules are formulated to trigger these options when necessary. The value of adaptability is then assessed by implementing several simulations using Real Options Analysis (ROA). To demonstrate the approach, the ABD is applied to a multi-use commercial building case study. Flexibility is embedded in the building’s design across several systems allowing it to change and evolve over time based on a set of design rules. The buildings adaptability is then assessed using ROA. Positive results demonstrate the strength of the proposed methodology in addressing future change and uncertaintie.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2010_039
id	ascaad2010_039
authors	Almusharaf, Ayman M.; Mahjoub Elnimeiri
year	2010
title	A Performance-Based Design Approach for Early Tall Building Form Development
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 39-50
summary	This paper presents a methodological interactive design approach within which structure is integrated into tall building form development. The approach establishes a synergy between generative and analytical tools to allow for parallel interaction of the formal and structural design considerations during the conceptual design phase. An integration of the associative modeling system, Grasshopper, and the structural analysis tool, ETABS was established, and a bi-directional feedback link between the two tools was initiated to guide the iterative from generation process. A design scenario is presented in this paper to demonstrate how the parametric generation and alteration of architectural form can be carried out based on instant feedback on the structural performance. Utilizing such a tool, architects can not only develop improved understanding of structural needs, but also realize their formal ideas structurally and materially.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_125
id	acadia10_125
authors	Andersen, Paul; Salomon, David
year	2010
title	The Pattern That Connects
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 125-132
doi	https://doi.org/10.52842/conf.acadia.2010.125
summary	While patterns have a spotty history in architecture, their definitions and uses in other fields offer new possibilities for design. This paper examines those definitions and uses—including theories put forward by architectural theorist, Christopher Alexander; art educator, Gyorgy Kepes; chemist, Ilya Prigogine; and anthropologist, Gregory Bateson. Of particular interest is the shift from eternal, essential, universal, and fundamental patterns to fleeting, superficial, specific, and incidental versions. While endemic to many contemporary architectural practices, this multifaceted view of patterns was anticipated by Bateson, who saw them as agents of evolution and learning. His desire to combine redundancy and noise offers architects new ways to understand patterns and use them to link form and information, matter and thought.
keywords	pattern, Bateson, evolution, noise, redundancy, feedback
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2010_47
id	sigradi2010_47
authors	Angulo, Antonieta; Mounayar Michel
year	2010
title	Virtual Sets: A Mixed Reality Application for an Old Practice
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 47-50
summary	This paper chronicles the implementation of state - of - the - art virtual set technology through the teaching of an independent study course at Ball State University. The paper describes the use of independent study formats as a means to initiate teaching of emergent media that does not fit neatly into specific academic silos. In addition to its learning potential this technology offers a new practice area for architects and designers that have an understanding of communication studies and space design at the crossroads of imagination. The creative realm for new emergent media and markets requires new teaching formats, opportunities and challenges for future implementation.
keywords	virtual sets, design communications, 3D modeling, design, mixed reality
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2010_320
id	sigradi2010_320
authors	Ariel, Moreira Alejandro
year	2010
title	Modelos digitales de representación de lo real como estrategia de management alternativo en la práctica profesional arquitectónica [Digital models of representation of reality as an alternative management strategy in architectural practice]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 320-323
summary	An architectural project is designed in weeks or months—sometimes in places far from the construction site—and is built in years. The challenge of design is more than creating a three - dimensional digital (3D) model that includes all available information; visualization and communication throughout the entire process is crucial due to the global nature of contemporary architectural practice. This study asks: What tool would satisfy this need for communication? The objective of this paper is to explore these issues and propose an answer to this query based on flexible management to solve them.
keywords	technological integration, BIM, IPD, knowledge management, digital model of reality
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2010_209
id	sigradi2010_209
authors	Aroztegui, Carmen
year	2010
title	Superficies adulteradas: el muro en línea y la representación fílmica [Adulterated surfaces: the online wall and conematic representation]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 209-212
summary	Online communities use a “wall” as a place to articulate non - synchronic communication among its members. Such a place, however, poorly explores the metaphor of the wall as a means of enhancing online experiences. Online “walls” do not explore or challenge the richness of a real wall, and they do not embrace new experiences that are only possible in the digital world. In order to tackle these issues, this paper analyzes three movie scenes where the everyday perception of the wall is altered by madness and estrangement. Finally, the paper suggests how these perceptions of the wall could be integrated into interfaces using touch screen technologies.
keywords	online, wall, metaphor, film, representation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia22_128
id	acadia22_128
authors	Azel, Nicolas; Pachuca, Brandon; Wilson, Lucien
year	2022
title	Closing the Gap
source	ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 128-137.
summary	This paper shares KPF Cloud Tools, a platform for using Rhino Compute (McNeel’s REST API for RhinoCommon and Grasshopper) to run a library of Grasshopper tools through a cloud server via a Rhino plugin with a procedurally generated user interface, making it quick to deploy new tools (Robert McNeel & Associates 2010). We describe the professional challenges that the KPF Cloud Tools platform solves, document the technical implementation of the platform, and illustrate its benefit through the impact on a large architectural practice.
series	ACADIA
type	paper
email
last changed	2024/02/06 14:00

_id	ascaad2010_213
id	ascaad2010_213
authors	Babsail, Mohammad; Mahjoub Elnimeiri
year	2010
title	A Computer Process for Investigating Wind Power Production in Building Integrated Wind Turbines
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 213-220
summary	This paper reports on the computer process to be used in an ongoing research to investigate the effect of architectural parameters of tall buildings on the incorporation of wind turbines. The process combines a generative modeling tool (Grasshopper) and a performance based CFD tool (Virtualwind). The process is demonstrated on three typical tall building plan configurations. The wind speed was simulated at certain locations to demonstrate the ability of tall buildings to enhance the wind speed and thus maximize the energy produced by wind turbines located between twin towers. The process to predict wind power production is lastly listed.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_313
id	acadia10_313
authors	Banda, Pablo
year	2010
title	Parametric Propagation of Acoustical Absorbers
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 313-319
doi	https://doi.org/10.52842/conf.acadia.2010.313
summary	The following paper deals with a performance-driven morphogenetic design task to improve the conditions of room acoustics, using as a case study the material laboratory of the School of Architecture at Federico Santa Maria University of Technology. Combining contemporary Parametric Modeling techniques and a Performance- Based approach, an automatic generative system was produced. This system generated a modular acoustic ceiling based on Helmholtz Resonators. To satisfy sound absorption requirements, acoustic knowledge was embedded within the system. It iterates through a series of design sub-tasks from Acoustic Simulation to Digital Fabrication, searching for a suitable design solution. The internal algorithmic complexity of the design process has been explored through this case study. Although it is focused on an acoustic component, the proposed design methodology can influence other experiences in Parametric Design.
keywords	Parametric Modeling, Sound Absorption & Acoustic Knowledge, Performance-Based Design, Design Task, Scripting, Digital Fabrication, Custom Tools, Honeycomb.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2010_272
id	sigradi2010_272
authors	Banda, Pablo
year	2010
title	Absorbente de panal de abejas: explorando la adición de performance en sistemas de modelado paramétrico [Absorbing honeycomb: exploring performance addition in parametric modeling systems]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 272-275
summary	This paper analyzes the characteristics of the development of generative systems, originated by embedding knowledge of sound absorption within a parametric design system and implementing Helmholtz Resonators for the decrement of low frequencies of sound. The encounter between physically - related knowledge and explicit geometric processes is observed by focusing on contemporary author skills and design postures to outline methodological traces for a performance - based approach to parametric design.
keywords	parametric modeling, performance - based design, digital fabrication, scripting, custom tools
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2021_110
id	caadria2021_110
authors	Bao, Ding Wen, Yan, Xin, Snooks, Roland and Xie, Yi Min
year	2021
title	SwarmBESO: Multi-agent and evolutionary computational design based on the principles of structural performance
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 241-250
doi	https://doi.org/10.52842/conf.caadria.2021.1.241
summary	This paper posits a design approach that integrates multi-agent generative algorithms and structural topology optimisation to design intricate, structurally efficient forms. The research proposes a connection between two dichotomous principles: architectural complexity and structural efficiency. Both multi-agent algorithms and Bi-directional evolutionary structural optimisation (BESO) (Huang and Xie 2010), are emerging techniques that have significant potential in the design of form and structure.This research proposes a structural behaviour feedback loop through encoding BESO structural rules within the logic of multi-agent algorithms. This hybridisation of topology optimisation and swarm intelligence, described here as SwarmBESO, is demonstrated through two simple structural models. The paper concludes by speculating on the potential of this approach for the design of intricate, complex structures and their potential realisation through additive manufacturing.
keywords	Swarm Intelligence; Multi-agent; BESO (bi-directional evolutionary structural optimisation); Intricate Architectural Form; Efficient Structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2010_298
id	sigradi2010_298
authors	Barcellos, Góes Mariza; David Maria Manuela
year	2010
title	Visualization: The Contribution of a Mathematical Mediating Artefact for Creative Processes and Design Activities
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 298-300
summary	Considering mathematical knowledge as an artefact that mediates social activities in the world, this paper emphasizes the contribution of visual thinking to mathematics education and extends it to the learning of design activities, especially in architectural contexts. Results from a previous research paper on architectural design, which focused on the work of some contemporary architects in their day - to - day office activities, showed the relevance of drawing in architectural practice. These results aroused our interest in researching the mediating role of drawing and its structuring effects on creative processes and design activities in architecture.
keywords	visualization, mathematics education, architectural design education, activity theory
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia10_263
id	acadia10_263
authors	Beaman, Michael Leighton; Bader, Stefan
year	2010
title	Responsive Shading \| Intelligent Façade Systems
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 263-270
doi	https://doi.org/10.52842/conf.acadia.2010.263
summary	As issues of sustainability gain traction for architects, methodologies for designing, analyzing, and calibrating design solutions have emerged as essential areas of research and development. A number of approaches have been pursued with regard to embedding data into the design process, most fall into one of two approaches to research. The first approach is to mediate environmental impact at the level of applied technology; the second alters building methods and material construction, generating efficient energy use. However, few approaches deal with the crafting of relationships between information and performance on an architectural level. We will examine an approach focused on understanding how crafting relationships between information and design can move architecture towards achieving sustainability. In developing this approach, we created a data-driven design methodology spanning from design inception to construction. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. By contextualizing the solutions generated, we were able design though a set of specific and controlled responses rather than as a singular solution. Information utilization requires a new kind of craft that moves beyond instances into relationships and offers performance sensitive issues in design a focused trajectory. We applied this method to the research and development of a responsive shading structure built in conjunction with a thermal testing lab for two test locations – Austin, Texas (Figure. 1 and 2) and Munich, Germany. The following paper chronicles the design and construction at the Texas site over an academic semester.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia10_333
id	acadia10_333
authors	Blough, Lawrence
year	2010
title	Digital Tracery: Fabricating Traits
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 333-339
doi	https://doi.org/10.52842/conf.acadia.2010.333
summary	Recently, prototyping enabled by CNC technology has found its way into design practice where concepts can be quickly and economically tested through multiple design iterations that closely approximate the realities of oneto- one construction. This has lead to the promise of renewed research in tectonics and constructional techniques where the traditional concepts of craft and the joint, that were once married to the hand, can be rediscovered through the agency of mass customization. If we apply the lineage of the trait—a representational and cognitive tool to marry complex form with the exigencies of construction—pedagogical approaches can be developed that extend the current interest in intricate surface, structural morphology and geometry towards a robust materiality rooted in componentry, the joint, and part-to-whole relationships. This paper will introduce several threads from the twentieth century that have informed these tendencies in contemporary design practice, emerging from the well spring of Viollet-le-Duc. The thesis is supported by undergraduate model-based research employing digital design and fabrication techniques.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2010_104
id	sigradi2010_104
authors	Borda, Adriane; De Freitas Pires Janice; Dalla Vecchia Luisa; Celani Gabriela
year	2010
title	Produção e compartilhamento de objetos de aprendizagem dirigidos ao projeto de arquitetura [Production and sharing of learning objects, aimed at architecture desing projects]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 104-107
summary	Didactic material in digital format is being produced in different contexts focused on similar themes. The efforts of such production are not being optimized. This paper describes the structuring process of a system of collaborative production of didactic material aimed at broadening geometric vocabulary and repertory in architecture. Established material regarding this theme is analyzed through the concept of learning objects. Efforts concentrate on the establishment of a taxonomy to characterize these objects, seeking to make the search and selective recovery of these objects easier. An environment has been made available for sharing, discussion and validation of this material, outlining a methodology for the establishment of the proposed system.
keywords	architecture; information and communication technologies; sharing; didactic material; taxonomy
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: