Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 131

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2010_222
id	ecaade2010_222
authors	Matcha, Heike; Ljubas, Ante
year	2010
title	Parametric Origami: Adaptable temporary buildings
doi	https://doi.org/10.52842/conf.ecaade.2010.243
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.243-251
summary	We employ the possibilities of parametric modeling software andcustomized mass production machinery to develop a design for adaptablemultifunctional temporary medium size buildings made from recyclable lightweight materials and built a prototype from cardboard. We developed agrasshopper script that controls the geometry of a self-supporting arc made from a folded plane. The project is conducted as an experimental design-and-build university course that familiarizes students with parametric thinking and designing and with carrying out a project from initial concepts through tobuilding a 1:1 prototype. This project is part of an ongoing series of investigative design & build courses integrating current design possibilities and construction methods.
wos	WOS:000340629400026
keywords	Parametric design; Grasshopper script; Temporary low-cost buildings; Student design build projects; CAAM methods
series	eCAADe
email
last changed	2022/06/07 07:59

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2010_114
id	ecaade2010_114
authors	Apollonio, Fabrizio I.; Gaiani, Marco; Corsi, Cristiana
year	2010
title	A Semantic and Parametric Method for 3D Models used in 3D Cognitive-Information System
doi	https://doi.org/10.52842/conf.ecaade.2010.863
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.863-872
summary	The paper presents an innovative semantic and parametric method to build 3D models to be used in cognitive-information systems. We integrated structured geometrical and documentary information resulting from multiple sources with the aim to enhance the knowledge of those sites within the frame of their historical evolution and their institutional management in a 3D GIS/DB. The developed applications were designed for different types of users, with a largely scalable interface, able to support different output devices and to work at different levels of iconicity. The system allows a full comprehension of the buildings in their own context, permitting to discover unknown relationships, to evaluate their architectural occupancy and to quickly access a complex system of information.
wos	WOS:000340629400092
keywords	3D-GIS; Semantic modeling; 3D reality-based modeling; Real-time rendering; Virtual heritage
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2010_140
id	ecaade2010_140
authors	Chronis, Angelos; Liapi, Katherine A.
year	2010
title	Parametric Approach to the Bioclimatic Design of a Student Housing Building in Patras, Greece
doi	https://doi.org/10.52842/conf.ecaade.2010.313
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.313-319
summary	A new housing complex on the Campus of the University of Patras, Greece, is expected to serve as a test-bed for experimentation with a parametric design process that integrates significant climatic data. To optimize the environmental performance of the proposed housing complex a parametric design algorithm has been developed. The algorithm links the weather data in the area with the site topography and the basic geometric features of the buildings on the site. To explore the interaction of the building features with the prevailing winds in the area and the solar exposure throughout the year various software applications, including computational fluid dynamics (CFD) simulations, have been utilized. The inclusion of wind data in the algorithm renders it particularly effective. The developed parametric process has been useful during the early design phase when studies on various patterns for arranging the buildings on the site were conducted. The parametric process has facilitated the configuration of the typical building block as well.
wos	WOS:000340629400033
keywords	Bioclimatic design; Parametric design; Design algorithms; Sun control; Wind analysis; CFD in building design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2010_166
id	ecaade2010_166
authors	Geyer, Philipp; Buchholz, Martin
year	2010
title	System-Embedded Building Design and Modeling: Parametric systems modeling of buildings and their environment for performance-based and strategic design
doi	https://doi.org/10.52842/conf.ecaade.2010.641
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.641-650
summary	The paper proposes Parametric Systems Modeling (PSM) as a tool for building and city planning. The outlined method is based on the Systems Modeling Language (SysML) and is intended for design, dimensioning, and optimization of buildings and cities as systems. The approach exceeds the geometric approach, considers additional information from physics, technology, as well as biology, and provides a basis for multidisciplinary analyses and simulations. Its application aims at the exploration of innovative sustainable design solutions at system level. The proposal of an innovative buildinggreenhouse-city system serves to illustrate the approach. Features of this system are closed water cycles, renewable energy use, thermo-chemical energy storage and transport of energy for heating and cooling purposes on the base of desiccants, as well as recycling of CO2 , accumulation of biomass and related soil improvement.
wos	WOS:000340629400069
keywords	Parametric systems modeling; Systems design and engineering; Sustainable city system; City-integrated greenhouse
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2010_089
id	ascaad2010_089
authors	Hemmerling, Marco
year	2010
title	Origamics
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 89-96
summary	Folding strategies in architecture have been explored since the 1990s – if not before – as a method to generate spatial and structural concepts by applying complex geometries. These strategies are generally related to an analogue working method that involves paper folded models rather than digital form finding processes. Against this background the paper focuses on the impact and possibilities of folding principles from origami for the digital design process in using parametric software to generate integral and adaptive systems within an experimental and intuitive design approach.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_158
id	ecaade2010_158
authors	Kuo, Jeannette; Zausinger, Dominik
year	2010
title	Scale and Complexity: Multi-layered, multi-scalar agent networks in time-based urban design
doi	https://doi.org/10.52842/conf.ecaade.2010.651
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.651-657
summary	Urban design, perhaps even more than architecture, is a timedependent discipline. With its multi-layered complexities, from individual buildings to entire regions, decisions made at one level, that may not show effect immediately, may prove to have disastrous consequences further down the line. The need to incorporate time-based simulations in urban modeling, and the demand for a means of evaluating the changes have led to explorations with multi-agent systems in computation that allow for decisions to be decentralized. From the first basic rule-based system of Conway’s Game of Life [1] to recent urban simulations developed at institutions like the ETH Zurich [2], or UCL CASA [3], these programs synthesize the various exigencies into complex simulations so that the designer may make informed decisions. It is however not enough to simply use parametrics in urban design. Rules or desires implemented at one scale may not apply to another, while isolating each scalar layer for independent study reverts to the disjunctive and shortsighted practices of past planning decisions. Central to current parametric research in urban design is the need to deal with multiple scales of urbanism with specific intelligence that can then feed back into the collective system: a networked parametric environment. This paper will present the results from a city-generator, developed in Processing by Dino Rossi, Dominik Zausinger and Jeannette Kuo, using multiagent systems that operate interactively at various scales.
wos	WOS:000340629400070
keywords	Agent-based modeling; Cellular automata; Parametric urbanism; Neural network; Complexity; Genetic algorithm; Urban dynamics
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2010_129
id	sigradi2010_129
authors	Lyon, Gottlieb Arturo; García Alvarado Rodrigo
year	2010
title	Variaciones intensivas: diseño paramétrico de edificios en altura basado en análisis topológico [Intensive variations: parametric design of tall buildings based on topological analysis]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 129-132
summary	Several building works have demonstrated the possibilities of architectural design based on structural performance. This work discusses some examples and digital design strategies that approach this issue, as well as an exercise for a tower generated through topological optimization. That experience presents alternatives for a traditional office tower in Santiago, Chile, the Torre Santa Maria, based on generative design strategies for the incorporation of structural and environmental requirements to define parametric models. The experience and the capabilities studied reveal an intensive variation of architectural shape. This approach challenges conventional building regularity and suggests new ways of designing based on material performance.
keywords	parametric design, topological analysis, tall buildings, environmental performance, structural performance
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadiaregional2011_019
id	acadiaregional2011_019
authors	Peters, Troy
year	2011
title	Simulation by Design: A Parametric Design Tool for Zero Energy Buildings
doi	https://doi.org/10.52842/conf.acadia.2011.x.q2q
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
summary	To address the shortcomings of integrating building simulation in architectural design and to make it more appealing to students, a simple interface to Energyplus was created. This interface models a simple rectangular building that is passively heated by direct gain and cooled by ventilation. A simple photovoltaic interface has also been added to supply fan energy. This tool has an OpenGL modeler for visualization and uses Energyplus for calculations. The interface will run a full year simulation and graph the results. The results are reported in a yearly graph that shows the outdoor and indoor temperature. The indoor temperature range is based on adaptive comfort level. The interface was tested and used in an introductory design studio in order to comply with the 2010 imperative. The students simulated a simple box and changed the buildings parameters until the building fell within the adaptive comfort zone for most of the year. The climate simulated was Chicago, IL. Using these parameters the students then designed the building. The resulting designs show that even though the students were restricted in parameters, such as window percentage, they were still able to creatively design unique buildings that use zero to negative net energy for heating and cooling in a climate such as Chicago.
series	ACADIA
last changed	2022/06/07 07:49

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_189
id	ascaad2010_189
authors	Allahaim, Fahad; Anas Alfaris and David Leifer
year	2010
title	Towards Changeability
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 189-200
summary	Many buildings around the world have undergone successive changes over their life cycles. Regardless of the type or size of a building there are usually requirements for change due to several unanticipated forces and emerging uncertainties that act upon them. These changes might be in the building’s spatial, structural or service systems. This can be due to changes in the needs of occupants, the market demand or technological advances. Although buildings undergo change, current design practice does not address this and buildings are still designed as if they will remain static. This paper proposes an Adaptable Buildings Design (ABD) Framework to address the issue of adaptability in building design. Using this methodology uncertainties and future changes are first identified. To increase the building’s longevity, flexibility options are embedded and design rules are formulated to trigger these options when necessary. The value of adaptability is then assessed by implementing several simulations using Real Options Analysis (ROA). To demonstrate the approach, the ABD is applied to a multi-use commercial building case study. Flexibility is embedded in the building’s design across several systems allowing it to change and evolve over time based on a set of design rules. The buildings adaptability is then assessed using ROA. Positive results demonstrate the strength of the proposed methodology in addressing future change and uncertaintie.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_110
id	ecaade2010_110
authors	Santo, Yasu; Frazer, John Hamilton; Drogemuller, Robin
year	2010
title	Co-Adaptive Environments: Investigation into computer and network enhanced adaptable, sustainable and participatory environments
doi	https://doi.org/10.52842/conf.ecaade.2010.677
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.677-686
summary	This paper presents research in response to environmental concerns we face today. In a search for a better method to manage spaces and building resources consumed excessively through traditional top-down architectural solutions, the research began by speculating that the building spaces and resources can be managed by designing architectural systems that encourage a bottom-up approach. In other words, this research investigates how to design systems that encourage occupants and users of buildings to actively understand, manage and customise their own spaces. Specific attention is paid to the participation of building users because no matter how sophisticated the system is, the building will become as wasteful as conventional buildings if users cannot, or do not want to, utilise the system effectively. The research is still in its early stages. The intension of this paper is to provide a background to the issue, discuss researches and projects relevant to, but not necessarily about, architecture, and introduce a number of hypothesis and investigations to realise adaptable, participatory and sustainable environments for users.
wos	WOS:000340629400073
keywords	Adaptive; Interactive; Participatory; Tangible; Ubiquitous
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac20108403
id	ijac20108403
authors	Aksamija, Ajla; Ivanka Iordanova
year	2010
title	Computational Environments with Multimodal Representations of Architectural Design Knowledge
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 439
summary	This article discusses interaction between multimodal representations of architectural design knowledge, particularly focusing on relating explicit and implicit types of information. The aim of the presented research is to develop a computational environment that combines several modes of representation, including and integrating different forms of architectural design knowledge. Development of an interactive digital-models library and ontological model of architectural design factors are discussed, which are complementary in nature. In a time when BIM software is seen as embodiment of domain knowledge and the future medium of architectural design, this paper presents an interaction between ontological representation of architectural design knowledge and its embodiment in interactive models, thus focusing on the process of design and design space exploration. In the digital environments that we propose, representation of different formats of knowledge, such as visual, linguistic or numeric, are integrated with relational and procedural information, design rules, and characteristics. Interactive search and query based on contextual constraints, and parametric variation of the model based on the information received from ontology are the underlying drivers for design exploration and development.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2010_039
id	ascaad2010_039
authors	Almusharaf, Ayman M.; Mahjoub Elnimeiri
year	2010
title	A Performance-Based Design Approach for Early Tall Building Form Development
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 39-50
summary	This paper presents a methodological interactive design approach within which structure is integrated into tall building form development. The approach establishes a synergy between generative and analytical tools to allow for parallel interaction of the formal and structural design considerations during the conceptual design phase. An integration of the associative modeling system, Grasshopper, and the structural analysis tool, ETABS was established, and a bi-directional feedback link between the two tools was initiated to guide the iterative from generation process. A design scenario is presented in this paper to demonstrate how the parametric generation and alteration of architectural form can be carried out based on instant feedback on the structural performance. Utilizing such a tool, architects can not only develop improved understanding of structural needs, but also realize their formal ideas structurally and materially.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ijac20108401
id	ijac20108401
authors	Attar, Ramtin; Robert Aish, Jos Stam, et al.
year	2010
title	Embedded Rationality: A Unified Simulation Framework for Interactive Form Finding
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 39
summary	This paper describes embedded rationality as a method for implicitly combining fabrication constraints into an interactive framework for conceptual design. While the concept of ‘embedded rationality’ has been previously discussed in the context of a parametric design environment, we employ this concept to present a novel framework for dynamic simulation as a method for interactive form-finding. By identifying categories of computational characteristics, we present a unified physics-solver that generalizes existing simulations through a constraint-based approach. Through several examples we explore conceptual approaches to a fixed form where the resulting effects of interacting forces are produced in real-time. Finally, we provide an example of embedded rationality by examining a constraint-based model of fabrication rationale for a Planar Offset Quad (POQ) panelization system.
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_029
id	caadria2010_029
authors	Baerlecken, Daniel; Martin Manegold, Judith Reitz and Arne Kuenstler
year	2010
title	Integrative parametric form-finding processes
doi	https://doi.org/10.52842/conf.caadria.2010.303
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 303-312
summary	The recent developments in digital technologies and contemporary design tools are initiating new approaches of form-finding based on parametric development of multiple geometries with simultaneous consideration of various aspects. This paper focuses on the use of advanced parametric CAD systems and reformulated construction logics to enhance the potential and possibilities of form finding processes. This approach is exemplified through the “Greenhouse Trauttmansdorff project”. The project demonstrates a form finding approach which is based on defined parameters that not only fulfil aesthetic and functional aspects, but simultaneously take structural properties and the resulting sun shading behaviour into account. We will explore within this paper how – next to the functional and contextual building requirements – required illumination levels inside the greenhouse create a feedback loop between the structural system and its cladding system.
keywords	parametric representations; digital technologies; digital fabrication; variable systems; load bearing construction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia10_313
id	acadia10_313
authors	Banda, Pablo
year	2010
title	Parametric Propagation of Acoustical Absorbers
doi	https://doi.org/10.52842/conf.acadia.2010.313
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 313-319
summary	The following paper deals with a performance-driven morphogenetic design task to improve the conditions of room acoustics, using as a case study the material laboratory of the School of Architecture at Federico Santa Maria University of Technology. Combining contemporary Parametric Modeling techniques and a Performance- Based approach, an automatic generative system was produced. This system generated a modular acoustic ceiling based on Helmholtz Resonators. To satisfy sound absorption requirements, acoustic knowledge was embedded within the system. It iterates through a series of design sub-tasks from Acoustic Simulation to Digital Fabrication, searching for a suitable design solution. The internal algorithmic complexity of the design process has been explored through this case study. Although it is focused on an acoustic component, the proposed design methodology can influence other experiences in Parametric Design.
keywords	Parametric Modeling, Sound Absorption & Acoustic Knowledge, Performance-Based Design, Design Task, Scripting, Digital Fabrication, Custom Tools, Honeycomb.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2010_272
id	sigradi2010_272
authors	Banda, Pablo
year	2010
title	Absorbente de panal de abejas: explorando la adición de performance en sistemas de modelado paramétrico [Absorbing honeycomb: exploring performance addition in parametric modeling systems]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 272-275
summary	This paper analyzes the characteristics of the development of generative systems, originated by embedding knowledge of sound absorption within a parametric design system and implementing Helmholtz Resonators for the decrement of low frequencies of sound. The encounter between physically - related knowledge and explicit geometric processes is observed by focusing on contemporary author skills and design postures to outline methodological traces for a performance - based approach to parametric design.
keywords	parametric modeling, performance - based design, digital fabrication, scripting, custom tools
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia10_357
id	acadia10_357
authors	Brell-Cokcan, Sigrid; Braumann, Johannes
year	2010
title	A New Parametric Design Tool for Robot Milling
doi	https://doi.org/10.52842/conf.acadia.2010.357
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 357-363
summary	This paper proposes the use of parametric design software, which is generally used for real-time analysis and evaluation of architectural design variants, to create a new production immanent design tool for robot milling. Robotic constraints are integrated in the data flow of the parametric model for calculating, visualizing and simulating robot milling toolpaths. As a result of the design process, a physical model together with a milling robot control data file is generated.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia10_364
id	acadia10_364
authors	Cabrinha, Mark
year	2010
title	Parametric Sensibility: Cultivating the Material Imagination in Digital Culture
doi	https://doi.org/10.52842/conf.acadia.2010.364
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 364-371
summary	Digital fabrication and parametric tools require not only digital dexterity but a robust material sensibility that precedes digital mediation. Developed through Gaston Bachelard’s concept of the graft, the material imagination acts as a reciprocal creative intelligence to today’s dominant formal imagination enabled through the fluid geometric precision in digital tools. This paper presents a series of “materials first” pedagogical approaches through which material constraints become operative design criteria in the development of digital skills. This intersection between analog and digital systems develops a parametric sensibility that is demonstrated through physical prototypes and full-scale installations. This approach is implicitly a critique of the disregard of material logic in many parametric approaches in particular, and digital design culture in general. Conversely, the development of a parametric sensibility through analog means enables the development of material primitives from which parametric tools can expand the material imagination while giving structure to it.
keywords	Parametric, Digital Fabrication, Analog, Digital
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: