Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 277

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2010_140
id	ecaade2010_140
authors	Chronis, Angelos; Liapi, Katherine A.
year	2010
title	Parametric Approach to the Bioclimatic Design of a Student Housing Building in Patras, Greece
doi	https://doi.org/10.52842/conf.ecaade.2010.313
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.313-319
summary	A new housing complex on the Campus of the University of Patras, Greece, is expected to serve as a test-bed for experimentation with a parametric design process that integrates significant climatic data. To optimize the environmental performance of the proposed housing complex a parametric design algorithm has been developed. The algorithm links the weather data in the area with the site topography and the basic geometric features of the buildings on the site. To explore the interaction of the building features with the prevailing winds in the area and the solar exposure throughout the year various software applications, including computational fluid dynamics (CFD) simulations, have been utilized. The inclusion of wind data in the algorithm renders it particularly effective. The developed parametric process has been useful during the early design phase when studies on various patterns for arranging the buildings on the site were conducted. The parametric process has facilitated the configuration of the typical building block as well.
wos	WOS:000340629400033
keywords	Bioclimatic design; Parametric design; Design algorithms; Sun control; Wind analysis; CFD in building design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2010_158
id	ecaade2010_158
authors	Kuo, Jeannette; Zausinger, Dominik
year	2010
title	Scale and Complexity: Multi-layered, multi-scalar agent networks in time-based urban design
doi	https://doi.org/10.52842/conf.ecaade.2010.651
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.651-657
summary	Urban design, perhaps even more than architecture, is a timedependent discipline. With its multi-layered complexities, from individual buildings to entire regions, decisions made at one level, that may not show effect immediately, may prove to have disastrous consequences further down the line. The need to incorporate time-based simulations in urban modeling, and the demand for a means of evaluating the changes have led to explorations with multi-agent systems in computation that allow for decisions to be decentralized. From the first basic rule-based system of Conway’s Game of Life [1] to recent urban simulations developed at institutions like the ETH Zurich [2], or UCL CASA [3], these programs synthesize the various exigencies into complex simulations so that the designer may make informed decisions. It is however not enough to simply use parametrics in urban design. Rules or desires implemented at one scale may not apply to another, while isolating each scalar layer for independent study reverts to the disjunctive and shortsighted practices of past planning decisions. Central to current parametric research in urban design is the need to deal with multiple scales of urbanism with specific intelligence that can then feed back into the collective system: a networked parametric environment. This paper will present the results from a city-generator, developed in Processing by Dino Rossi, Dominik Zausinger and Jeannette Kuo, using multiagent systems that operate interactively at various scales.
wos	WOS:000340629400070
keywords	Agent-based modeling; Cellular automata; Parametric urbanism; Neural network; Complexity; Genetic algorithm; Urban dynamics
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_135
id	ascaad2010_135
authors	Lostritto, Carl
year	2010
title	Computation Without Computers
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 135-144
summary	This work documents the implications of using physical media to teach digital design concepts, techniques, values and approaches. With the pedagogy and work of a seminar and studio across two Universities as test cases, this research seeks to prove that a parametric and algorithmic approach to architecture is most fruitfully understood as the connection between logic, mathematics and aesthetics. Students trace the indirect relationships between process and product so as to enable the application of these connections in a non-linear, exploratory and goal-flexible design process. The first phase of student work involves the creation of an image, constructed with ink or graphite on paper, that embodies a parametric aesthetic. Students are tasked articulating and performing operations, such as dividing a curve, packing shapes, and conditional transformations. Subsequently, students fabricate a surface-conscious model with modules that have the capacity to vary based on their grid parameter, using historically rooted techniques such as weaving, perforating, layering and tessellation. Digital fabrication and parametric modeling is then introduced, not as a means to a predefined end, but as another medium, capable of participating with manual techniques. As an example, a fabricated paper-based installation is generated with parametrically generating a cut-sheet, partially blind to its assembled manifestation. The hypothesis of this research is tested in more comprehensive projects that follow as environmental forces are resolved through dynamic and ambiguous visual and spatial conditions.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	sigradi2010_205
id	sigradi2010_205
authors	Miotto, Bruscato Underléa; García Alvarado Rodrigo
year	2010
title	Muro - pixel: exploración digital de un sistema constructivo de placas entrelazadas [Muro - pixel: digital exploration of a constructive system with interlocking plates]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 205-208
summary	This paper reports the initial development of a constructive system based on interlocked boards manufactured through digital fabrication. The system is based on the elaboration of grooves in regular pieces by a laser - cutter or CNC - machines to develop self - supported configurations. A parametric design system has been designed and several material models and full - scale prototypes have been built. Although the system requires evaluation of its structural features, production and maintenance, it offers novel building alternatives. This experience set up an innovative way of performing experimental research to develop new products and possible designs.
keywords	digital fabrication, constructive system, parametric design, flexible wall, assembly
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia10_320
id	acadia10_320
authors	Rajus, Vinu Subashini; Woodbury, Robert; Erhan, Halil I.; Riecke, Bernhard E.; Mueller, Volker
year	2010
title	Collaboration in Parametric Design: Analyzing User Interaction during Information Sharing
doi	https://doi.org/10.52842/conf.acadia.2010.320
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 320-326
summary	Designers work in groups. They need to share information either synchronously or asynchronously as they work with parametric modeling software, as with all computer-aided design tools. Receiving information from collaborators while working may intrude on their work and thought processes. Little research exists on how the reception of design updates influences designers in their work. Nor do we know much about designer preferences for collaboration. In this paper, we examine how sharing and receiving design updates affects designers’ performances and preferences. We present a system prototype to share changes on demand or in continuous mode while performing design tasks. A pilot study measuring the preferences of nine pairs of designers for different combinations of control modes and design tasks shows statistically significant differences between the task types and control modes. The types of tasks affect the preferences of users to the types of control modes. In an apparent contradiction, user preference of control modes contradicts task performance time.
keywords	Parametric Design, Collaboration, Human Interaction
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ecaade2010_114
id	ecaade2010_114
authors	Apollonio, Fabrizio I.; Gaiani, Marco; Corsi, Cristiana
year	2010
title	A Semantic and Parametric Method for 3D Models used in 3D Cognitive-Information System
doi	https://doi.org/10.52842/conf.ecaade.2010.863
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.863-872
summary	The paper presents an innovative semantic and parametric method to build 3D models to be used in cognitive-information systems. We integrated structured geometrical and documentary information resulting from multiple sources with the aim to enhance the knowledge of those sites within the frame of their historical evolution and their institutional management in a 3D GIS/DB. The developed applications were designed for different types of users, with a largely scalable interface, able to support different output devices and to work at different levels of iconicity. The system allows a full comprehension of the buildings in their own context, permitting to discover unknown relationships, to evaluate their architectural occupancy and to quickly access a complex system of information.
wos	WOS:000340629400092
keywords	3D-GIS; Semantic modeling; 3D reality-based modeling; Real-time rendering; Virtual heritage
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac20108203
id	ijac20108203
authors	Chevrier, Christine; Nathalie Charbonneau, Pierre Grussenmeyer, Jean-Pierre Perrin
year	2010
title	Parametric Documenting of Built Heritage: 3D Virtual Reconstruction of Architectural Details
source	International Journal of Architectural Computing vol. 8 - no. 2, 135-150
summary	This paper examines 3D modelling of architectural elements with the help of parametric components. Such components may be useful within the framework of projects dealing with virtual 3D reconstruction of heritage monuments. Architectural components of the built heritage often have complex geometry. We studied the various geometrical shapes of a given architectural element, representative of a specific period and place. This study allowed us to identify the parameters and to implement parametric objects (in Maya Environment [1]). We also developed a Graphical User Interface (GUI) to answer the user's needs while generating the 3D model representing the architectural element. Within this GUI, the user is able to make adjustments with the help of laser point clouds from laserscanning, 2D plans or photographs. We exemplify our method with a case study dealing with openings and lintels. The corpus under study consists of elements of the built heritage of Montreal (Canada) and Nancy (France).
series	journal
last changed	2019/05/24 09:55

_id	acadia10_218
id	acadia10_218
authors	Chok, Kermin; Donofrio, Mark
year	2010
title	Structure at the Velocity of Architecture
doi	https://doi.org/10.52842/conf.acadia.2010.218
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 218-226
summary	This paper outlines a digital design workflow, utilized by the authors, which actively links the geometry platforms being utilized by architects with tools for structural analysis, design, form-finding, and optimization. This workflow leads to an accelerated generation and transfer of information to help guide and inform the design process. The engineering team is thus empowered to augment the architect’s design by ensuring that the design team is conscious of the structural implications of design decisions throughout the design process. A crucial element of this design process has been the dynamic linkage of parametric geometry models with structural analysis and design tools. This reduces random errors in model generation and allows more time for critical analysis evaluation. However, the ability to run a multitude of options in a compressed time frame has led to ever increasing data sets. A key component of this structural engineering workflow has become the visualization and rigorous interpretation of the data generated by the analysis process. The authors have explored visualization techniques to distill the complex analysis results into graphics that are easily discernable by all members of the design team.
keywords	Workflows, Structure, Collaboration, Visualizations, Analysis
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia10_103
id	acadia10_103
authors	Flöry, Simon; Pottmann, Helmut
year	2010
title	Ruled Surfaces for Rationalization and Design in Architecture
doi	https://doi.org/10.52842/conf.acadia.2010.103
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 103-109
summary	In this work, we address the challenges in the realization of free-form architecture and complex shapes in general with the technical advantages of ruled surfaces. We propose a geometry processing framework to approximate (rationalize) a given shape by one or multiple strips of ruled surfaces. We discuss techniques to achieve an overall smooth surface and develop a parametric model for the generation of curvature continuous surfaces composed of ruled surface strips. We illustrate the usability of the proposed process at hand of several projects, where the pipeline has been applied to compute NC data for mould production and to rationalize large parts of free-form facades.
keywords	geometry processing; architectural geometry; ruled surface; strip model; surface fitting
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ascaad2010_249
id	ascaad2010_249
authors	Hawker, Ronald; Dina Elkady and Thomas Tucker.
year	2010
title	Not Just Another Pretty Face
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 249-260
summary	Digital Heritage has gained popularity recently as means of dynamically representing and reconstructing historic buildings and cityscapes. Simultaneously this new medium of visualization affords another approach to examine human-virtual environment interaction and offers possibilities of exploiting virtual environments as educational tools. At Zayed University, a federal university primarily for women citizens of the United Arab Emirates, we have integrated student-faculty research and documented and reconstructed a number of historical buildings within the curriculum of the Department of Art and Design. We have further collaborated with the animation program at Winston Salem State University in North Carolina, utilizing the motion capture laboratory at the Center of Design Innovation to literally breathe life into these reconstructions. The primary idea is to contribute to the ongoing documentation of the country’s heritage through creating “responsive virtual heritage environments” where the spectator is actively engaged in exploring the digital space and gain certain degrees of control over the course and scheme of the dynamic experience. The process begins by introducing students to utilize the diverse capabilities of CAD and three dimensional computer applications and intertwine the technical skills they acquire to construct virtual computer models of indigenous built environments. The workflow between the different applications is crucial to stimulate students’ problem solving abilities and tame the application tools, specifically when constructing complex objects and structural details. In addition the spatial and temporal specificity different computer applications afford has proven useful in highlighting and analyzing the buildings’ function within the extreme climate of the country and their role in the political-economy, particularly in visualizing the ephemeral qualities of the architecture as they relate to passive cooling and the inter-relationships between built and natural environments. Light and time settings clarify shadow casting and explain the placement and orientation of buildings. Particle simulations demonstrate the harnessing of wind and rain both urban and rural settings. The quantitative data accumulated and charted through CAD and VR programs and geo-browsers can be integrated with qualitative data to create a more holistic analytical framework for understanding the complex nature of past settlement patterns. In addition, the dynamic nature of this integration creates a powerful educational tool. This paper reviews this ongoing research project with examples of reconstructions completed across the country, demonstrating analytical and educational possibilities through the integration of CAD programs with a range of other statistical, geographic, and visualization software.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2010_019
id	ascaad2010_019
authors	Katz, Neil C.
year	2010
title	Algorithmic Modeling; Parametric Thinking: Computational Solutions to Design Problems
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 19-36
summary	Architects and designers have often used computational design techniques in their design process, even without "computers", from designing spaces which activate at the instant of the solstice sunrise, to creating geometrically complex and structurally innovative cathedrals. Designing with rules and variables can lead to solutions which satisfy the design criteria and may result in interesting and unanticipated models. Computational design is a process of designing and a way of thinking; contemporary tools can promote and enhance this process. Algorithmic and parametric modeling (and thinking) can be powerful processes in design, and particularly in working with complex geometry and addressing project constraints and analytical and data-driven design. This paper describes these methods and provides examples of their use on projects at Skidmore, Owings & Merrill.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	sigradi2010_30
id	sigradi2010_30
authors	Kaufmann, Stefan; Schubert Gerhard; Petzold Frank
year	2010
title	Escaping the Model’s Scale
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 30-34
summary	Over the last five years, the use of computer - controlled machinery in the building process has expanded immensely. With the help of parametric software, it has become possible not only to manage ever more complex structures but also to realize them using digital fabrication processes. These increased possibilities in turn place new demands on architectural teaching and its underlying didactic concepts. Taking the “WAVE 0.18” project as an example, this paper demonstrates the possibilities as well as the challenges of new didactic concepts and their practical application at the Chair for Architectural Informatics at the TU Munich.
keywords	didactics, parametric design, digital fabrication, CAM, Scale 1:1.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	acadia10_139
id	acadia10_139
authors	Miller, Nathan
year	2010
title	[make]SHIFT: Information Exchange and Collaborative Design Workflows
doi	https://doi.org/10.52842/conf.acadia.2010.139
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 139-144
summary	This paper explores design processes requiring the invention and implementation of customized workflows for the optimization of design information exchange. Standard workflows in design software are typically dependent upon the use of proprietary file formats to communicate design intent across the design team. Software platforms promote “one-stop-shop” proprietary approaches to BIM where all team members and consultants ideally operate within a single model environment and store information within a single file format. While the ‘single model’ approach can be effective under some circumstances, this approach is often found to be limiting when the design process calls for the integration of other design toolsets and delivery processes. This is especially true for large complex projects where multiple participants with different software requirements need to collaborate on the same design. In these cases, various non-standard ways of working are often implemented, resulting in a new means of communicating design and building information across a team. This paper will outline the impact customized workflows have on the design process at NBBJ and evaluate their potential for leading to more innovative design and integrated teams. The first study will explore and evaluate the communication and collaborative process that took place in the design development and construction documentation stages of the Hangzhou Stadium. The second study will be an overview of ongoing investigation and experimentation into customized workflows for team and data integration.
keywords	team integration, international practice, parametric methods
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ijac20108307
id	ijac20108307
authors	Park, Kat; Nicholas Holt
year	2010
title	Parametric Design Process of a Complex Building In Practice Using Programmed Code As Master Model
source	International Journal of Architectural Computing vol. 8 - no. 3, pp. 359-376
summary	Parameter based design explorations inevitably require a unified master model that represents the current design state, where each parameter being explored is essentially a critical sub-case of this master model. Throughout the constantly changing design state, it is beneficial to maintain a master model that is flexible and adaptive. This paper describes the design process of a complex building whose master model documented the design logic through implementation of software code. This process is illustrated by the case study of Lotte Super Tower (Seoul, Korea) from the beginning of schematic design to end of construction document phase. By maintaining the master model as a platform-free software code, in contrast to platform-dependent methods, the case study illuminates the advantages of documenting the generative logic behind design variations in a way that allows greater flexibility and a higher level of alignment with design intent.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_055
id	ecaade2010_055
authors	Peters, Brady; Olesen, Tobias S.
year	2010
title	Integrating Sound Scattering Measurements in the Design of Complex Architectural Surfaces: Informing a parametric design strategy with acoustic measurements from rapid prototype scale models
doi	https://doi.org/10.52842/conf.ecaade.2010.481
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.481-491
summary	Digital tools present the opportunity for incorporating performance analysis into the architectural design process. Acoustic performance is an important criterion for architectural design. There is much known about sound absorption but little about sound scattering, even though scattering is recognized to be one of the most important factors in predicting the acoustic performance of architectural spaces. This paper proposes a workflow for the design of complex architectural surfaces and the prediction of their sound scattering properties. This workflow includes the development of computational design tools, geometry generation, fabrication of test surfaces, measurement of acoustic performance, the incorporation of this data into the generative tool. The Hexagon Wall is included and discussed as an illustrative design study.
wos	WOS:000340629400052
keywords	Architectural acoustics; Parametric design; Rapid prototyping
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ascaad2010_075
id	ascaad2010_075
authors	Schubert, Gerhard; Kaufmann Stefan and Petzold Frank
year	2010
title	Project Wave 0.18
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 75-88
summary	In recent years a number of projects have been emerged, in which the new possibilities of the computer as a design tool, have been used. Through the digital chain from design to manufacturing the efficiency has increased and allows the implementation of complex architectural structures. With all these new opportunities, also new challenges arise in the teaching and the educational concepts. The paper describes the detailed course concept and the didactic strategy using the example of a parametric designed roof structure, we designed, planed and build up in scale 1:1 within the main course. „Wendepunkt\|e im Bauen“ (Turning point\|s of building) is the name of an exhibition at the “Pinakothek der Moderne” in Spring 2010. In addition to contributions of the industrialization in the building industry from 1850 to the present day, the exhibition also serves as a platform, to demonstrate new possibilities of computer-aided parametric design and the closely related computer aided manufacturing (CAM). In this context, we took the chance to build a sculpture in Scale 1:1 to show the potential of a constant digital workflow and the digital fabrication. Through the digital chain from design to manufacturing, the efficiency has been increased by the computer and allows the implementation of new complex architectural structures. But the efficiency of the high-degree-automation through the use of computerized machines usually ends in the production of the components. Because this coincidence of the elements in the assembly often proves cost and time, the aim of the project was to optimize both, the production of components and their assembly as well. As part of the wintercourse 2009/2010 different aspects of automation have been reviewed and new solutions have been analyzed. Together with 15 students of the Faculty of Architecture the complete digital chain started with the first design ideas, about parametric programming through production and assembly had been researched, implemented and brought to reality. In the first steps, the students had to learn about the potential, but also about the problems coming with the digital-design and the attached digital-production. There for the course took part at our computerlab. In weekly workshops, all ideas have been implemented and tested directly in the 3-dimensional parametric model. And thanks to the interdisciplinary work with the Department of Structural Design also static factors had been considered, to optimize the form. Parallel to the digital form-finding process, the first prototypes have been produced by the students. By using the chairs 3D-CNC-Mills we were able to check the programmed connection detail in reality and apply the so learned lessons to the further development. After nearly 3 month of research, designing, planning and programming, we were able to produce the over 1000 different parts in only 4 days. By developing a special pre-stressed structure and connection detail it was also possible, to assemble the whole structure (13.5m x 4.5m x 4m) in only one day. The close connection between digital design (CAD) and digital manufacturing (CAM) is an important point of our doctrine. By the fact, that the students operate the machines themselves, but also implement projects on a scale of 1:1, they learn to independently evaluate these new tools and to use them in a meaningful way.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2023_317
id	ecaade2023_317
authors	Zamani, Alireza, Mohseni, Alale and Bertug Çapunaman, Özgüç
year	2023
title	Reconfigurable Formwork System for Vision-Informed Conformal Robotic 3D Printing
doi	https://doi.org/10.52842/conf.ecaade.2023.1.387
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 387–396
summary	Robotic additive manufacturing has garnered significant research and development interest due to its transformative potential in architecture, engineering, and construction as a cost-effective, material-efficient, and energy-saving fabrication method. However, despite its potential, conventional approaches heavily depend on meticulously optimized work environments, as robotic arms possess limited information regarding their immediate surroundings (Bechthold, 2010; Bechthold & King, 2013). Furthermore, such approaches are often restricted to planar build surfaces and slicing algorithms due to computational and physical practicality, which consequently limits the feasibility of robotic solutions in scenarios involving complex geometries and materials. Building on previous work (Çapunaman et al., 2022), this research investigates conformal 3D printing of clay using a 6 degrees-of-freedom robot arm and a vision-based sensing framework on parametrically reconfigurable tensile hyperbolic paraboloid (hypar) formwork. In this paper, we present the implementation details of the formwork system, share findings from preliminary testing of the proposed workflow, and demonstrate application feasibility through a design exercise that aims to fabricate unique components for a poly-hypar surface structure. The formwork system also offers parametric control over generating complex, non-planar tensile surfaces to be printed on. Within the scope of this workflow, the vision-based sensing framework is employed to generate a digital twin informing iterative tuning of the formwork geometry and conformal toolpath planning on scanned geometries. Additionally, we utilized the augmented fabrication framework to observe and analyze deformations in the printed clay body that occurs during air drying. The proposed workflow, in conjunction with the vision-based sensing framework and the reconfigurable formwork, aims to minimize time and material waste in custom formwork fabrication and printing support materials for complex geometric panels and shell structures.
keywords	Robotic Fabrication, Conformal 3D Printing, Additive Manufacturing, Computer-Vision, Reconfigurable Formwork
series	eCAADe
email
last changed	2023/12/10 10:49

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: