Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 449

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2010_58
id	sigradi2010_58
authors	Cardoso, Eduardo
year	2010
title	A contribuição da prototipagem com emprego de fresadora CNC no processo de design de produto [The contribution of prototyping with the use of CNC milling machine in the process of product design]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 58-61
summary	This article presents the work developed in the Models and Prototypes II class found in the undergraduate program in design at the Federal University of Rio Grande do Sul. The paper aims to show the objectives of the discipline, the methodology and results obtained through the use of Subtractive Rapid Prototyping (SRP) in the development of new products, as well as the technical, formal, conceptual and economic demands considered in the design of furniture.
keywords	subtractive rapid prototyping; design; product design; furniture
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2010_264
id	sigradi2010_264
authors	Cardoso, Eduardo; de Vargas Scherer Fabiano
year	2010
title	O uso de modelos virtuais e físicos no ensino de projeto integrado de sistemas de sinalização e mobiliário urbano [The use of virtual and physical models in design teaching: sygnal systems and urban furniture]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 264-267
summary	This article presents the Integrated Project I class at the Federal University of Rio Grande do Sul which covers design of signage systems and urban furniture of the undergraduate courses of product design and visual design. This work presents the objectives of the discipline, as well as the methodology, applications and importance of physical and virtual models in the development process of signage and urban furniture, beginning with the stages of creation to development, detailing and implementation.
keywords	CAD; CAM; prototyping; signage; urban furniture
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2010_218
id	sigradi2010_218
authors	Corbucci, Caldeira Marco Antonio; Silva José Reinaldo
year	2010
title	A Collaborative Framework for Conceptual Design
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 218-221
summary	Currently almost all complex products, including physical products as well as information - based products are developed through the interaction of many participants that work on different elements of project. This creates a need for increased adoption of information technology and computer - based communication tools to manage the entire process of product development. This work proposes a framework of a collaborative system to support conceptual design. This should provide a team environment in which to discuss, exchange knowledge and information, negotiate, and develop joint projects through intelligent interfaces in order to have more flexibility to design more efficiently and effectively.
keywords	conceptual design, collaboration, collaborative systems
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ascaad2010_097
id	ascaad2010_097
authors	Kenzari, Bechir
year	2010
title	Generative Design and the Reduction of Presence
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 97-106
summary	Digital design/fabrication is slowly emancipating architectural design from its traditional static/representational role and endowing it instead with a new, generative function. In opposition to the classical isomorphism between drawings and buildings, wherein the second stand as translations of the first, the digital design/fabrication scenario does not strictly fall within a semiotic frame as much as within a quasi biological context, reminiscent of the Aristotelian notion of entelechy. For the digital data does not represent the building as much it actively works to become the building itself. Only upon sending a given file to a machine does the building begin to materialize as an empirical reality, And eventually a habitable space as we empirically know it. And until the digital data actualizes itself, the building qua building is no more than one single, potential possibility among many others. This new universe of digital design/fabrication does not only cause buildings to be produced as quick, precise, multiply-generated objects but also reduces their presence as original entities. Like cars and fashion items, built structures will soon be manufactured as routinely-consumed items that would look original only through the subtle mechanisms of flexibility: frequent alteration of prototype design (Style 2010, Style 2015..) and “perpetual profiling” (mine, yours, hers,..). The generic will necessarily take over the circumstantial. But this truth will be veiled since “customized prototypes” will be produced or altered to individual or personal specifications. This implies that certain “myths” have to be generated to speed up consumption, to stimulate excessive use and to lock people into a continuous system which can generate consumption through a vocabulary of interchangeable, layered and repeatable functions. Samples of “next season’s buildings” will be displayed and disseminated to enforce this strategy of stimulating and channeling desire. A degree of manipulation is involved, and the consumer is flattered into believing that his or her own free assessment of and choice between the options on offer will lead him or her to select the product the advertiser is seeking to sell. From the standpoint of the architect as a maker, the rising upsurge of digital design and fabrication could leave us mourning the loss of what has been a personal stomping ground, namely the intensity of the directly lived experiences of design and building. The direct, sensuous contact with drawings, models and materials is now being lost to a (digital) realm whose attributes refer to physical reality only remotely. Unlike (analogue) drawings and buildings, digital manipulations and prototypes do not exercise themselves in a real space, and are not subjected in the most rigorous way to spatial information. They denote in this sense a loss of immediacy and a withering of corporal thought. This flexible production of space and the consequent loss of immediate experience from the part of the designer will be analyzed within a theoretical framework underpinned mainly by the works of Walter Benjamin. Samples of digitally-produced objects will be used to illustrate this argument.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_117
id	ecaade2010_117
authors	Koenig, Reinhard; Thurow, Torsten; Braunes, Jo_rg; Tonn, Christian; Donath, Dirk; Schneider, Sven
year	2010
title	FREAC: A Technical Introduction to a Framework for Enhancing Research in Architectural Design and Communication
doi	https://doi.org/10.52842/conf.ecaade.2010.445
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.445-451
summary	This paper describes a framework for a collaborative, dynamically modifiable product model called FREAC built for the purposes of experimental software development. When developing FREAC, we attempted to realise the following properties that are typically lacking in currently available commercial systems: first, a high degree of flexibility so that it is highly adaptable to the needs of different disciplines; second, the ability to seamlessly connect different tools; third, real-time concurrent modelling by different remote partners; fourth, the ability to save a record of the entire modelling process; fifth, dynamic extensibility both for software developers as well as for the end users of the respective tools.
wos	WOS:000340629400048
keywords	Software development; Experimental platform; Product model; Digital building model
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ascaad2010_135
id	ascaad2010_135
authors	Lostritto, Carl
year	2010
title	Computation Without Computers
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 135-144
summary	This work documents the implications of using physical media to teach digital design concepts, techniques, values and approaches. With the pedagogy and work of a seminar and studio across two Universities as test cases, this research seeks to prove that a parametric and algorithmic approach to architecture is most fruitfully understood as the connection between logic, mathematics and aesthetics. Students trace the indirect relationships between process and product so as to enable the application of these connections in a non-linear, exploratory and goal-flexible design process. The first phase of student work involves the creation of an image, constructed with ink or graphite on paper, that embodies a parametric aesthetic. Students are tasked articulating and performing operations, such as dividing a curve, packing shapes, and conditional transformations. Subsequently, students fabricate a surface-conscious model with modules that have the capacity to vary based on their grid parameter, using historically rooted techniques such as weaving, perforating, layering and tessellation. Digital fabrication and parametric modeling is then introduced, not as a means to a predefined end, but as another medium, capable of participating with manual techniques. As an example, a fabricated paper-based installation is generated with parametrically generating a cut-sheet, partially blind to its assembled manifestation. The hypothesis of this research is tested in more comprehensive projects that follow as environmental forces are resolved through dynamic and ambiguous visual and spatial conditions.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	sigradi2010_334
id	sigradi2010_334
authors	Martin, Kathi; KoSeoul Hyeong_Seok
year	2010
title	The Imaginative Fashion Experience
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 334-337
summary	Symptomatic of a good deal of our education, design, manufacturing, and product delivery mechanisms still grounded in 20th century traditions, much of the variety of expertise required for development of the most effective digital tools remains distinct and non - collaborative. This report describes an application utilized in multi - cultural fashion design and cultural heritage projects that may fundamentally change how we experience fashion and alter the way we manufacture clothes, conserve cultural artifacts, and educate the next leaders of multidisciplinary areas.
keywords	virtual clothing, digital cultural heritage, interdisciplinary design collaboration, multi cultural design collaboration
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2012_235
id	sigradi2012_235
authors	Polo, Pablo Herrera
year	2012
title	Reutilizando códigos como mecanismo de información y conocimiento: Programación en arquitectura [Reusing codes as a mechanism of information and cognition: Scripting in architecture]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 74-78
summary	Differently from other regions in the Planet, since 2010, in Latin America textual programming language (Rhinoscripting) is being replaced by its visual equivalent (Grasshopper). This is a consequence of our preference for an interactive platform, and because our design problems are not as complex, so we aim to control geometrical problems or aspects belonging to an product scale instead of an architectural one. Problems emerging when creating code could be improved by modifying and reusing existing solutions as a starting point, since learning would not be centered in the object but in the process of creating it, using a suitable instrument.
keywords	Visual Programming Language; Textual Programming Language; Scripting; Grasshopper; Rhinoscripting
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	caadria2010_009
id	caadria2010_009
authors	Rahaman, Hafizur and Beng-Kiang Tan
year	2010
title	Interpreting digital heritage: considering the end-user’s perspective
doi	https://doi.org/10.52842/conf.caadria.2010.093
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 93-102
summary	Present virtual heritage projects are mostly focused either on ‘process’ or ‘product’ but rarely consider ‘user’ (end user’s perception of the content) with project contents predominantly developed with an ‘ocular-centric’ tendency. There is no significant interpretation method or principles for interpreting digital heritage unlike other disciplines such as archaeology. This paper argues that, for better interpretation and experience of a digital heritage site, a comprehensive interpretation method is required, which should address multicultural background of end-users and overcome the linearity and subjectiveness in content creation. This paper also argues that instead of pre-determined instructional sequences or descriptive interpretation, the interaction setting can be participatory and contributive, where the visitor and environment may interplay mutually with each other. As a methodology, ‘Interpretation’ is first conceptualized by assimilating definitions from heritage scholars and organizations. Notions of interpretation-practice and level of interaction were identified from reviewing some online digital heritage projects. By identifying weaknesses, this paper finally proposes a few suggestions for overcoming and possibly developing a comprehensive interpretation method for future digital heritage projects.
keywords	Heritage interpretation; end user; digital heritage
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	sigradi2011_091
id	sigradi2011_091
authors	Rodriguez Barros, Diana
year	2011
title	Diseño de Productos y Modelado 3D Hiperrealistico. Un caso de enseñanza y práctica proyectual en entornos digitales [Product design and hyper realistic 3D model. A case of teaching and design practice in digital environments]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 411-414
summary	We present a teaching experience carried out during the second quarter of 2010 in the Industrial Informatics 2 course of FAUD UNMdP Industrial Design Product oriented career, about three-dimensional and communication module. We tackle this practice, developed in the digital workshop environment, from the perspective of Design Thinking through an approach to the multidimensional implicit in the design process. The experience walked through the initial product selection and recognition of coding guidelines for design; redesign, 3D modeling and product prototyping; and result communicating. We consider have obtained multiple and original results to tackle, complement and resolve the design in virtual environments from the individual interests of students.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
doi	https://doi.org/10.52842/conf.caadria.2010.443
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	architectural_intelligence2023_10
id	architectural_intelligence2023_10
authors	Cheng Bi Duan, Su Yi Shen, Ding Wen Bao & Xin Yan
year	2023
title	Innovative design solutions for contemporary Tou-Kung based on topological optimisation
doi	https://doi.org/https://doi.org/10.1007/s44223-023-00028-x
source	Architectural Intelligence Journal
summary	Tou-Kung, which is pronounced in Chinese and known as Bracket Set (Liang & Fairbank, A pictorial history of Chinese architecture, 1984), is a vital support component in the Chinese traditional wooden tectonic systems. It is located between the column and the beam and connects the eave and pillar, making the heavy roof extend out of the eaves longer. The development of Tou-Kung is entirely a microcosm of the development of ancient Chinese architecture; the aesthetic structure and Asian artistic temperament behind Tou-Kung make it gradually become the cultural and spiritual symbol of traditional Chinese architecture. In the contemporary era, inheriting and developing Tou-Kung has become an essential issue. Several architects have attempted to employ new materials and techniques to integrate the traditional Tou-Kung into modern architectural systems, such as the China Pavilion at the 2010 World Expo and Yusuhara Wooden Bridge Museum. This paper introduces the topological optimisation method bi-directional evolutionary structural optimisation (BESO) for form-finding. BESO method is one of the most popular topology optimisation methods widely employed in civil engineering and architecture. Through analyzing the development trend of Tou-Kung and mechanical structure, the authors integrate 2D and 3D optimisation methods and apply the hybrid methods to form-finding. Meanwhile, mortise and tenon joint used to create stable connections with components of Tou-Kung are retained. This research aims to design a new Tou-Kung corresponding to “structural performance-based aesthetics”. The workflow proposed in this paper is valuable for Architrave and other traditional building components.
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

_id	ecaade2010_107
id	ecaade2010_107
authors	Gaiani, Marco; Ferioli, Silvia; Ricci, Pier Carlo; Barone, Mirko; Agnoletti, Michele
year	2010
title	A Framework for a Sustainable Design and Presentation Process of Furniture Collection
doi	https://doi.org/10.52842/conf.ecaade.2010.471
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.471-480
summary	Design and presentation of new furniture is today a great challenge that requires a large amount of resources: exhibition space, photographic studios, physical prototypes, etc. In this paper we present a new RTR framework RTR-based that allows a more sustainable design and communication process. The framework is addressed to furniture designers, interior designers, furniture companies and presents techniques and methods developed to meet the requirement to ensure predictive rendering quality required by the high level furniture industries. Finally, in order to ensure full functionality a number of tools described in the paper were developed.
wos	WOS:000340629400051
keywords	Real-time rendering; Semantic modeling; Virtual furniture design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2010_384
id	sigradi2010_384
authors	García, Alvarado Rodrigo; Turkienicz Benamy
year	2010
title	Generative House: Exploration of Digital Fabrication and Generative System for Low - cost Housing in Southern Brazil
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 384-387
summary	Generative House is a collaborative exploration of advanced technologies for lower - and working - class housing carried out by industrial and academic partners in southern Brazil. It seeks to test generative procedures and digital manufacturing to develop a flexible building system for low - cost sustainable housing in order to inspire future developments in this field by developing an urban grammar through manufacturing models and generative programming, as well as parametric design of panels assembled using digital fabrication. Scale models and full - scale prototype with timber boards have been built, demonstrating the feasibility of the approach proposed. However, further refinement of the adopted procedures and technical applications is required.
keywords	low - cost housing, generative programming, parametric design, digital manufacturing, collaborative development
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2010_021
id	ecaade2010_021
authors	Gil, Jorge; Beirao, Jose; Montenegro, Nuno; Duarte, Jose
year	2010
title	Assessing Computational Tools for Urban Design: Towards a “city information model”
doi	https://doi.org/10.52842/conf.ecaade.2010.361
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.361-369
summary	This paper presents an assessment of a selection software tools for urban design confronting their capabilities with the goals of the CityInduction research project. The goal of this paper is the assessment of existing platforms for computer aided urban design to select one as the basis for implementing the urban design model proposed in the CityInduction project. This model includes three sub-models that support the formulation of design programs from contextual information, the exploration of designs solutions through a grammarbased generative approach, and the validation of designs against the program through the use of evaluation tools. To each of these sub-models corresponds a module in the envisioned platform and so, existing platforms are assessed in terms of their ability to support the implementation of each module. The current goal is a proof-of-concept implementation, but the final goal is the development of a complete platform for supporting urban design.
wos	WOS:000340629400038
keywords	Software review; Sustainable urban design; GIS; CAAD; BIM
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2010_168
id	ecaade2010_168
authors	Halatsch, Jan; Caro, Thomas; Moser, Bruno; Schmitt, Gerhard
year	2010
title	A Grammar-based Procedural Design Guideline Visualization Diagram for the Development of SVA Masdar
doi	https://doi.org/10.52842/conf.ecaade.2010.833
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.833-840
summary	Nowadays, a large set of involved planning parties are heavily demanded with the definition of holistic in kind requirement specifications for urban planning sites – so called future cities. However, the resulting amountof specifications for a specific building project poses a great challenge to designers and planners especially when it comes to include this information into their design proposals for a sustainable urban development. These design performance criteria are traditionally expressed in textual and numerical planning guidelines and which are making it difficult to establish a comprehensive and holistic view onto the domain itself. Therefore we present in this paper a design guide visualization method to overcome this situation for the evaluation of design specification and urban layouts in a qualitative and quantitative manner.
wos	WOS:000340629400089
keywords	Sustainable urban patterns; Shape grammars; Design evaluation; Urban planning; Design guide translation
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: