Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 447

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2010_011
id	caadria2010_011
authors	Maleki, Maryam M. and Robert F. Woodbury
year	2010
title	Programming in the model: combining task and tool in computer-aided design
doi	https://doi.org/10.52842/conf.caadria.2010.117
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 117-125
summary	Programming takes designers away from typical domain- and task-based interfaces such as three-dimensional modellers. It thus imposes additional cognitive load on the already challenging design task. Programming in the model is a system design strategy that embeds the act of programming in a 3D CAD model. This paper presents the argument for programming in the model and two user interface constructs that support such programming.
keywords	End-user programming; scripting; visual programming; direct manipulation
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ascaad2010_075
id	ascaad2010_075
authors	Schubert, Gerhard; Kaufmann Stefan and Petzold Frank
year	2010
title	Project Wave 0.18
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 75-88
summary	In recent years a number of projects have been emerged, in which the new possibilities of the computer as a design tool, have been used. Through the digital chain from design to manufacturing the efficiency has increased and allows the implementation of complex architectural structures. With all these new opportunities, also new challenges arise in the teaching and the educational concepts. The paper describes the detailed course concept and the didactic strategy using the example of a parametric designed roof structure, we designed, planed and build up in scale 1:1 within the main course. „Wendepunkt\|e im Bauen“ (Turning point\|s of building) is the name of an exhibition at the “Pinakothek der Moderne” in Spring 2010. In addition to contributions of the industrialization in the building industry from 1850 to the present day, the exhibition also serves as a platform, to demonstrate new possibilities of computer-aided parametric design and the closely related computer aided manufacturing (CAM). In this context, we took the chance to build a sculpture in Scale 1:1 to show the potential of a constant digital workflow and the digital fabrication. Through the digital chain from design to manufacturing, the efficiency has been increased by the computer and allows the implementation of new complex architectural structures. But the efficiency of the high-degree-automation through the use of computerized machines usually ends in the production of the components. Because this coincidence of the elements in the assembly often proves cost and time, the aim of the project was to optimize both, the production of components and their assembly as well. As part of the wintercourse 2009/2010 different aspects of automation have been reviewed and new solutions have been analyzed. Together with 15 students of the Faculty of Architecture the complete digital chain started with the first design ideas, about parametric programming through production and assembly had been researched, implemented and brought to reality. In the first steps, the students had to learn about the potential, but also about the problems coming with the digital-design and the attached digital-production. There for the course took part at our computerlab. In weekly workshops, all ideas have been implemented and tested directly in the 3-dimensional parametric model. And thanks to the interdisciplinary work with the Department of Structural Design also static factors had been considered, to optimize the form. Parallel to the digital form-finding process, the first prototypes have been produced by the students. By using the chairs 3D-CNC-Mills we were able to check the programmed connection detail in reality and apply the so learned lessons to the further development. After nearly 3 month of research, designing, planning and programming, we were able to produce the over 1000 different parts in only 4 days. By developing a special pre-stressed structure and connection detail it was also possible, to assemble the whole structure (13.5m x 4.5m x 4m) in only one day. The close connection between digital design (CAD) and digital manufacturing (CAM) is an important point of our doctrine. By the fact, that the students operate the machines themselves, but also implement projects on a scale of 1:1, they learn to independently evaluate these new tools and to use them in a meaningful way.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaadesigradi2019_397
id	ecaadesigradi2019_397
authors	Cristie, Verina and Joyce, Sam Conrad
year	2019
title	'GHShot': a collaborative and distributed visual version control for Grasshopper parametric programming
doi	https://doi.org/10.52842/conf.ecaade.2019.3.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	When working with parametric models, architects typically focus on using rather structuring them (Woodbury, 2010). As a result, increasing design complexity typically means a convoluted parametric model, amplifying known problems: 'hard to understand, modify, share and reuse' (Smith 2007; Davis 2011). This practice is in contrast with conventional software-programming where programmers are known to meticulously document and structure their code with versioning tool. In this paper, we argue that versioning tools could help to manage parametric modelling complexity, as it has been showing with software counterparts. Four key features of version control: committing, differentiating, branching, and merging, and how they could be implemented in a parametric design practice are discussed. Initial user test sessions with 5 student designers using GHShot Grasshopper version control plugin (Cristie and Joyce 2018, 2017) revealed that the plugin is useful to record and overview design progression, share model, and provide a fallback mechanism.
keywords	Version Control; Parametric Design; Collaborative Design; Design Exploration
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ascaad2010_109
id	ascaad2010_109
authors	Hamadah, Qutaibah
year	2010
title	A Computational Medium for the Conceptual Design of Mix-Use Projects
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 109-116
summary	Mix use development is receiving wide attention for its unique sustainable benefits. Nevertheless, the planning and designing of successful mixed use projects in today's environment is a complex matrix of skill sets and necessary collaborations between various stakeholders and design professionals. From a design point of view, architects are required to manage and coordinate large information sets, which are many time at odds with one another. The expansive space of knowledge and information is at its best vague and substantially ill-structured. A situation that continues to overburden architects mental and intellectual ability to understand, address and communicate the design issue. In the face of this complex condition, designers are gravitating towards information modeling to manage and organize the expansive data. However, is becoming increasingly evident that current building information modeling applications are less suited for early design activity due to their interrupted and rigid workflows. Against this background, this paper presents a theoretical framework for a computational medium to support the designer during early phases of exploring and investigating design alternatives for mix-use projects. The focus is on the conjecture between programming and conceptual design phase; when uncertainty and ambiguity as at its maximum, and the absence of computational support continues to be the norm. It must be noted however, the aim of the medium is not to formulate or automate design answers. Rather, to support designers by augmenting and enhancing their ability to interpret, understand, and communicate the diverse and multi-faceted design issue. In literature on interpretation, Hans-Georg Gadamer explains that understanding is contingent on an act of construction. To understand something is to construct it. In light of this explanation. To help designers understand the design issue, is to help them construct it. To this end, the computational medium discussed in this paper is conceived to model (construct) the mix-use architectural program. In effect, turning it into a dynamic and interactive information model in the form of a graph (network). This is an important development because it will enable an entirely new level of interaction between the designer and the design-problem. It will allow the designer to gather, view, query and repurpose the information in novel ways. It will offer the designer a new context to foster knowledge and understanding about the ill-structured and vague design issue. Additionally, the medium would serve well to communicate and share knowledge between the various stakeholders and design professionals. Central to the discussion are two questions: First, how can architects model the design program using a graph? Second, what is the nature of the proposed computational medium; namely, its components and defining properties?
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_017
id	ecaade2010_017
authors	Hemsath, Timothy L.
year	2010
title	Searching for Innovation Through Teaching Digital Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2010.021
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.21-30
summary	The use of digital fabrication in the discourse and education of architectural students has become a common skill in many schools of architecture. There is a growing demand for computer-aided design (CAD) skills, computer-aided manufacturing (CAM) logic, programming and fabrication knowledge in student education. The relevance of fabrication tools for architecture and design education goes beyond mere competence and can pursue innovation in what Branko Koleravic (2003) observed, “The digital age has radically reconfigured the relationship between conception and production, creating a direct digital link between what can be conceived and what can be built through “file-to-factory” processes of computer numerically controlled (CNC) fabrication”. However, there has been very little written about what students are actually learning through digital fabrication courses and the relevance of the skills required for innovation in the field of digital fabrication.
wos	WOS:000340629400001
keywords	CAD; CAM; Pedagogy; Curriculum
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ascaad2010_179
id	ascaad2010_179
authors	Jones, Charles; Kevin Sweet
year	2010
title	Over Constrained
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 179-188
summary	Parametric software has fundamentally changed the way in which architecture is conceptualized, developed and even constructed. The ability to assign parameters or numeric variables to specific portions of a project has allowed designers the potential to test variations of their design. Small changes to a single parameter can have an exponential effect on the designed object and alter its appearance beyond original preconceptions in both positive and negative ways. Parametric software also has the ability to constrain or restrict geometry to set values, parameters or conditions. This has the benefit of allowing portions of a form to remain constant or unchanged while simultaneously allowing for a great degree of flexibility in response to a design intent. Constraining portions of a design allows architects to respond to existing or unalterable conditions by ""locking down"" information within a project and then explore those portions that can change more freely. This programmed relationship between the parameter and the form, once established, can give the illusion of minimal effort for maximum output. The ease in which geometrical form can be altered and shaped by a single variable can mislead beginning designers into thinking that the software makes these relationships for them. What is hidden, is the programming or connections needed between the parameters and the geometry in order to produce such dramatic change. Finally, thinking parametrically about design reintroduces the concept of a rigorous, intent driven, fabrication oriented practice; a practice lost in a digital era where the novelty of new tools was sufficient to produce new form. Because parametric models must have established relationships to all parts of the design, each component must have a purpose, be well thought out, and have a direct relationship to a real world object. The introduction of parametric design methodologies into an architectural pedagogy reestablishes architectural praxis in an academic setting. Students are taught to design based on creating relationships to connected components; just as they would do in a professional architectural practice. This paper outlines how Digital Project – a parametric based software – was introduced into an academic setting in an attempt reconnect the ideologies of academia with the practicalities of professional practice. In order to take full advantage of Digital Project as a parameter based software, a project that creates modular, flexible geometries was devised. Produced over one semester, the project set out to find ways of controlling designed geometry through variable parameters that allowed the initial module to be instantiated or replicated into a wall condition: maintaining a unified whole of discrete components. This paper outlines this process, the results and how the outcomes demonstrates the parametric ideologies described above.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ecaade2010_104
id	ecaade2010_104
authors	Mark, Earl
year	2010
title	Optimizing Solar Insolation in Transformable Fabric Architecture: A parametric search design process
doi	https://doi.org/10.52842/conf.ecaade.2010.461
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.461-470
summary	A design studio and a parallel research project focused on transformable fabric architecture. To facilitate a part of this work, computer based shape generation tools were used to optimize the placement of thin-film photovoltaic cells onto a transformable roof structure. In addition, the tension membrane fabric is rigged in a way that is similar to a sailing boat. The fabric is set into position by winches and cables. The winches are hand-operated so as to lower the overall energy cost. The initial computer models proceeded concurrently with the mockup of small-scale physical prototypes. In addition, the author used an open source programming language to implement a particle spring real time simulation of the fabric shapes. The simulation included a three-dimensional graphical representation of solar insolation and helped to further determine the physical geometry of the project. One of the goals was to evaluate whether larger transformations to the structure as a whole or smaller movements in the fabric would help to optimize the solar insolation benefits. As the examination of potential forms narrowed down to classical saddle shapes, the practical details of rigging the fabric imposed further limitations on its transformable nature. This paper is focused on how modeling with ad hoc tools and especially real-time computer simulation influenced the direction of the work.
wos	WOS:000340629400050
keywords	Transformable fabric architecture; Parametric design; Thin-film photovoltaic cells; Animation; Simulation
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2010_018
id	caadria2010_018
authors	Schoch, M.; A. Praditsmanont and C. Prakasvudhisarn
year	2010
title	Shaping building volumes through life cycle costs: a constraint programming approach for building volume optimisation
doi	https://doi.org/10.52842/conf.caadria.2010.185
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 185-194
summary	Due to a general freedom in the architectural design process, a wide range of possible alternatives exist; although building-volume designs must also continue to meet numerous, possibly conflicting design requirements originating from various related disciplines. This research addresses problems associated with missing quantitative design aids during the early design stages. It aims to provide designers with solutions that provide optimal cost-effectiveness. The demonstrated building-volume optimisation model minimises life cycle costs by determining optimal-volume dimensions, floor number, building orientation and ‘window / wall’ opening ratios while satisfying site and building code regulations and design constraints. Results indicate an optimal solution can be found within a practical timeframe. The proposed, novel approach to introduce cost objectives into building-volume design provides designers with a valuable decision support tool in a design domain that is known to be complex owing to multiple design criteria and constraint influences.
keywords	Decision support; design optimisation; building volume design; life cycle costs and constraint-based design
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2010_384
id	sigradi2010_384
authors	García, Alvarado Rodrigo; Turkienicz Benamy
year	2010
title	Generative House: Exploration of Digital Fabrication and Generative System for Low - cost Housing in Southern Brazil
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 384-387
summary	Generative House is a collaborative exploration of advanced technologies for lower - and working - class housing carried out by industrial and academic partners in southern Brazil. It seeks to test generative procedures and digital manufacturing to develop a flexible building system for low - cost sustainable housing in order to inspire future developments in this field by developing an urban grammar through manufacturing models and generative programming, as well as parametric design of panels assembled using digital fabrication. Scale models and full - scale prototype with timber boards have been built, demonstrating the feasibility of the approach proposed. However, further refinement of the adopted procedures and technical applications is required.
keywords	low - cost housing, generative programming, parametric design, digital manufacturing, collaborative development
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ascaad2010_127
id	ascaad2010_127
authors	Hubers, Hans
year	2010
title	Collaborative Parametric BIM
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 127-134
summary	The paper will be focussing on a number of digital design tools used in [our groups credentials]. A new laboratory called […] is developed with Virtual Reality for collaborative architectural design. A brief description of the systems and how they are used to support a design team is given. Synchronic and a-synchronic, local and inter-local communication is made possible. Methods for introducing sustainability in the digital design process and user participation over the Internet will be discussed. The results of the author’s PhD research “Collaborative architectural design in virtual reality” are used to develop a new approach in which team members use their own specific software. Swarm design applications developed in Virtools are used at the start of a project. The objects in the swarm can be urban and architectural functional volumes. Examples of the first are houses, offices, factories, roads and water ways. Examples of the second are working, dining, shopping and waiting spaces. Relations between the functional volumes with or without constraints make the functional volumes swarm to find equilibrium. Everything is dynamic, meaning that relations and functional volumes can change any time. Alternatives can be developed using different values for these parameters and by top-down intervention. When the final global layout has been chosen, using a criteria matrix with sustainability criteria to be judged by all participants, including the future users, a next phase is started amongst professionals using parametric design software. A study into different types of parametric design software makes clear why object parametric software can be used for IFC based BIM, while the more interesting process parametric software can not. To make this clear a pragmatic description of the IFC format is given with a simple example of such a file. Future research will be proposed in which applications of different disciplines are connected through the application programming interfaces, while integrating as much as possible the building information and knowledge in the IFC format.
series	ASCAAD
type	normal paper
email
last changed	2011/03/01 07:48

_id	acadia11_372
id	acadia11_372
authors	James, Anne; Nagasaka, Dai
year	2011
title	Integrative Design Strategies for Multimedia in Architecture
doi	https://doi.org/10.52842/conf.acadia.2011.372
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 372-379
summary	Multidisciplinary efforts that have shaped the current integration of multimedia into architectural spaces have primarily been conducted by collaborative efforts among art, engineering, interaction design, informatics and software programming. These collaborations have focused on the complexities of designing for applications of multimedia in specific real world contexts. Outside a small but growing number of researchers and practitioners, architects have been largely absent from these efforts. This has resulted in projects that deal primarily with developing technologies augmenting existing architectural environments. (Greenfield and Shepard 2007)This paper examines the potential of multimedia and architecture integration to create new possibilities for architectural space. Established practices of constructing architecture suggest creating space by conventional architectural means. On the other hand, multimedia influences and their effect on the tectonics, topos and typos (Frampton 2001) of an architectural space (‘multimedia effects matrix’) suggest new modes of shaping space. It is proposed that correlations exist between those two that could inform unified design strategies. Case study analyses were conducted examining five works of interactive spaces and multimedia installation artworks, selected from an initial larger study of 25 works. Each case study investigated the means of shaping space employed, according to both conventional architectural practices and the principles of multimedia influence (in reference to the ‘multimedia effects matrix’) (James and Nagasaka 2010, 278-285). Findings from the case studies suggest strong correlations between the two approaches to spatial construction. To indicate these correlations, this paper presents five speculative integrative design strategies derived from the case studies, intended to inform future architectural design practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2010_142
id	ecaade2010_142
authors	Labelle, Guillaume; Nembrini, Julien; Huang, Jeffrey
year	2010
title	Geometric Programming Framework: ANAR+: Geometry library for Processing
doi	https://doi.org/10.52842/conf.ecaade.2010.403
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.403-410
summary	This paper introduces a JAVA based library for parametric modeling through programming. From the recent advent of scripting tools integrated into commercial CAAD software and everyday design practice, the use of programming applied to an architectural design process becomes a necessary field of study. The ANAR+ library is a parametric geometry environment meant to be used as programming interface by designers. Form exploration strategies based on parametric variations depends on the internal logic description, a key role for form generation. In most commercial CAD software, geometric data structures are often predefined objects, thus constraining the form exploration, whereas digital architectural research and teaching are in need for an encompassing tool able to step beyond new software products limitations. We introduce key concepts of the library and show a use of the library within a form finding process driven by irradiance simulation.
wos	WOS:000340629400043
keywords	Processing; JAVA; Scene graph; Parametric modeling; Geometry
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_195
id	ecaade2010_195
authors	Leitão, António; Cabecinhas, Filipe; Martins, Susana
year	2010
title	Revisiting the Architecture Curriculum: The programming perspective
doi	https://doi.org/10.52842/conf.ecaade.2010.081
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.81-88
summary	Nowadays, programming is quickly becoming part of the tool chest of the modern architect. Unfortunately, the architecture curriculum does not yet recognize its importance and usefulness or uses inadequate languages or programming environments to teach it. In this paper we argue that it is necessary to include computer science courses in the architecture curriculum and that these courses should be tailored to the needs of the architects. To help achieve this goal, we propose VisualScheme, an interactive programming environment that accompanies the architect from the learning phases to the advanced uses and that can be explored in pedagogic, research, and industry settings.
wos	WOS:000340629400008
keywords	Generative design; Programming; Teaching; Computer-aided-design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_214
id	ecaade2010_214
authors	Lemberski, David; Hemmerling, Marco
year	2010
title	Mixer Modeling – An Intuitive Design Tool: Using a hardware controller to actuate parametric design software
doi	https://doi.org/10.52842/conf.ecaade.2010.453
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.453-458
summary	Music and architecture share not only phenomenological similarities in relation to their characteristics - like volume, timbre, tone pitch, instrumentation vs. geometry, materiality, light ambiance or perspective - but imply as well comparability in the process of creation. The investigation of digital tools that cross borders between music and architecture was the starting point for the research project „Mixer Modeling“. Against this background the paper discusses the transformation of a musical composition controller into an intuitive design tool for the generation of architectural geometries. In the same amount that the use of a MIDI-controller increases the degrees of freedom for the simultaneous activation of various parameters the definition of geometric dependencies on the level of visual programming become more important for the resulting geometry.
wos	WOS:000340629400049
keywords	Intuitive design tool; Parametric design; Music and architecture; Hardware controller; MIDI; Visual programming; Human-computer interaction
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2010_025
id	caadria2010_025
authors	Meyboom, Annalisa; Jerzy Wojtowicz and Greg Johnson
year	2010
title	ROBO studio: towards architectronics
doi	https://doi.org/10.52842/conf.caadria.2010.259
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 259-268
summary	Contemporary architecture can be seen as a dynamic system that causes change to its environment, or even as system that can modify itself. Interactive or responsive environments are not totally new to architecture however the possibilities in architecture have only been lightly referred to. This interdisciplinary design studio, with mechatronics engineers and architects collaborating, explored possible applications with real world equipment, sensors and knowledge. Development of responsive architecture requires architects to have a fluency in sensors, actuators and their control system programming. New potential application of technologies requires a re-framing of what that technology could do in a different social application. Together these issues challenged architecture and engineering students in a collaborative design environment. The resulting projects – kinetic architecture on control systems – challenge our understanding of what our built environment could be.
keywords	Architecture; mechatronics; robotics; kinematics; design
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	sigradi2010_39
id	sigradi2010_39
authors	Piazentin, Ono Jorge Henrique; Corbucci Caldeira Marco Antonio
year	2010
title	Graphical Simulator for a Robotic Environment
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 39-42
summary	In this paper we present a didactic tool named “STORM”, which simulates a real environment in which students can control and program a robot in a very basic way by simply setting switches to configure an action or an activity to be carried out by the robot. The control interface is totally graphic, so it can be used by students from primary schools to universities. The objective of the simulator is to create learning objects to develop the dynamic and strategic competences of students in addition to concepts such as robot navigation and control, and computer programming.
keywords	robotics, simulation, robotic education
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ijac20108303
id	ijac20108303
authors	Rafael, Urquiza S.
year	2010
title	Parametric Performative Systems: Designing a Bioclimatic Responsive Skin
source	International Journal of Architectural Computing vol. 8 - no. 3, pp. 279-300
summary	This paper assumes the façade as an innovative element of interaction between the inside and the outside: the architectural skin. As in nature, one of its most significant functions is the energy exchange with the environment. Similarly, efficiency increases by passive and active responses to climate conditions and site orientation. This research explores the potential of parametric techniques, programming and digital manufacturing, to design and build a Bioclimatic Responsive Skin (BRS). Firstly, we designed a bio-component applicable to any surface due to its parametric nature. Secondly, we fabricated two non-reactive working prototypes to study the manufacturing and construction details. Thirdly, we integrated the physical and the digital interfaces by using Generative Components™, Arduino, and Ubimash to generate a kinetic responsive model. This prototype was presented at SmartGeometry Workshop and Conference 2010. Finally, Lem3a architecture used this BRS in a real design project for a Sustainable house in New Hope, PA.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_069
id	ecaade2010_069
authors	Schoch, Martin; Praditsmanont, Apichat
year	2010
title	Experimenting with Building Footprint Formation and Volume Optimization: A constraint programming approach for the optimization of buildingvolumes based on combinatorial rectangular footprint formations
doi	https://doi.org/10.52842/conf.ecaade.2010.419
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.419-427
summary	This paper is focusing on integrating footprint formations of buildingvolumes into an existing research of building-volume optimization (BVO). While earlier BVO experiments concentrated on single rectangular floor-area units per floor, the current BVO model allows footprint assemblies of combinatorial rectangular floor-area units per floor. The aspect of using these combinatorial floor assemblies is to provide more flexibility into the shaping of possible building-volumes and thus a more realistic approach to building-volume design. The investigation regarding combinatorial floor-area units concentrated on running time in reference to amount of allowable unit combinations per floor and the ability to provide close to optimal solutions through additional search runs. Results of the experiments documented a sharp increase of running time due to the additional allocation of floor-area units, while the BVO model was improved through the ability to generate combinatory footprint formation and offer close to optimal solutions.
wos	WOS:000340629400045
keywords	Decision support; Design optimization; Building-volume design; Life cycle costs; Constraint-based design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2009_833
id	sigradi2009_833
authors	Stoyanov, Momchil
year	2009
title	Análise lumínica virtual de elementos construídos por meio de programação: exemplo de aplicação em software do tipo BIM [ Analysis of Virtual Elements Constructed by Means of Programming: The Example of BIM-Application Software]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	Daylighting is an important part of designing sustainably. Daylighting is the use of natural light for primary interior illumination. This reduces our need for artificial light within the space, thus reducing internal heat gain and energy use. Direct sunlight, once it enters the building, is not only light but heat, and that additional heat will need to be taken into account in your energy analysis." While Autodesk Revit Architecture 2010 (ARA) itself cannot perform the actual analysis, there are some ways to do that. This papper focuses on the study of parametric modeling using a BIM tool for daylighting analysis. This paper presents the first part of the building method of LUME, a plug-in maked whit C# programming language in Microsoft Visual Studio 2010 and ARA Software Developer Kit (SDK) package. The script accepts as its input a standard three dimensional model of building opening and his position on space.
keywords	Script language; BIM; Revit Architecture; Energy analysis; Daylighting; Parametric design process
series	SIGRADI
email
last changed	2016/03/10 10:01

For more results click below: