Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 445

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2010_000
id	ecaade2010_000
authors	Schmitt, Gerhard; Hovestadt, Ludger; Van Gool, Luc; Bosché, Frédéric; Burkhard, Remo; Colemann, Suzanne; Halatsch, Jan; Hansmeyer, Michael; Konsorski-Lang, Silke; Kunze, Antje; Sehmi-Luck, Martina (eds.)
year	2010
title	FUTURE CITIES
source	28th eCAADe Conference Proceedings [ISBN 978-0-9541183-7-2], ETH Zurich (Switzerland) 15-18 September 2010, 904 p.
doi	https://doi.org/10.52842/conf.ecaade.2010
summary	Future Cities – the title of the 2010 eCAADe Conference describes one of the major challenges of the 21st century. The conference theme is a logical evolution from previous years in that it expands the focus of interest from the building to larger scales and higher complexity. The conference contributions describe methods and instruments that were developed in the last three decades and apply them to city and territorial planning. The eCAADe proceedings demonstrate that CAAD research and education of the past prepared the ground for the future and for the increased responsibility of the CAAD community. The population of cities has developed worldwide from a minority to the majority. Cities are the largest, most complex and most dynamic man-made systems. As vibrant centres of cultural life and of mega events, they are engines that drive local and global economies. However, their growth was in the fewest cases determined by sustainability goals. As a result, contemporary metropolitan territories are often environmentally, socially and economically unsustainable entities placing increasing pressure on the surrounding rural areas. No longer do traditional methods support the planning and managing of large cities – these methods have reached their limits. Parallel to the revolution in the design of buildings, we need a radical re-thinking of the planning, design, development and management process of cities and urban-rural systems. Compared to buildings, urban and rural systems involve a much higher number of stakeholders and decision makers. We need to study and simulate the effects and side effects of urban-rural planning or re-development much earlier in the process than normally done today. The goal seems clear: the transformation of existing and the planning of new sustainable urban-rural systems. As ordering principles we can build on experiences with building architecture. Complexity, dynamics, scale, and the urban metabolism evolve as promising research and education areas.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2010_43
id	sigradi2010_43
authors	Clayton, Mark J.; Ozener Ozan; Haliburton James; Farias Francisco
year	2010
title	Towards Studio 21: Experiments in Design Education Using BIM
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 43-46
summary	Explorations conducted in university - based design studios suggest that Building Information Modeling (BIM) technology invites the adoption of a dramatically different design process. In contrast to conventional process rooted in successive refinement of initial abstractions and dependence on tacit knowledge, the Studio 21 BIM - aided process relies upon a complete and comprehensive base case and subsequent alternative schemes that are subjected to explicit analysis to support choice of the final design. The Studio 21 process can boost the objective level of performance that is achieved. It is teachable and may be a better process for addressing 21st century imperatives.
keywords	design, process, education, BIM, studio
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	acadia10_73
id	acadia10_73
authors	Mathew, Anijo Punnen
year	2010
title	Just in Place Learning: A Novel Framework for Employing Information in “Place” for Urban Learning Environments
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 73-80
doi	https://doi.org/10.52842/conf.acadia.2010.073
summary	Nineteenth century models of education and learning which dictate that information is passed on from teacher to apprentice :abstract in a closed classroom environment seem archaic to us, especially since so much of our experiences are constructed in the outside world. Advances in ubiquitous and calm computing; social and immersive media; and urban locative technologies now allow for embedding complex information into physical environments and thus open up possibilities for teachers to set up carefully tagged student engagements in the real world—in “places” where real scientific phenomena are happening and technological artifacts can be engaged with. However these models are seldom successful because they are employed without an understanding of changing paradigms of learning. In this paper, we look at several new developments in learning models and use them to develop Just in Place learning, a novel framework which harnesses embodiment, place, and the potential of new locative technologies to augment traditional practice-based learning. Just in Place learning provides new potential for teachers and students to engage with information in “place,” exploit the urban environment as the new classroom, and the built environment as a portal for situated learning.
keywords	Urban computing, interactive environments, education, digital media learning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2010_004
id	ecaade2010_004
authors	Paio, Alexandra; Turkienicz, Benamy
year	2010
title	A Grammar for Portuguese Historical Urban Design
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.349-358
doi	https://doi.org/10.52842/conf.ecaade.2010.349
wos	WOS:000340629400037
summary	This paper suggests that Portuguese historical cities were based on a structured knowledge-based process from where it’s possible to retrieve not only a generative parametric urban grammar but also to construct a computational model capable to generate Portuguese planimetric proportionate and symmetrical urban grammar. The grammar is described graphically and discursively, followed by the introduction of a 2D shape grammars interpreter UrbanGENE. The 2D shape grammar interpreter will allow the user to interact with the genetic and generative principles of Portuguese historical urban design from 16th to 18th century and additionally be deployed in urban history teaching and learning.
keywords	Urban design; Shape grammars; Generative and parametric design; UrbanGENE
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia10_305
id	acadia10_305
authors	Perry, Chris
year	2010
title	Anticipatory Architecture \| Extrapolative Design
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 305-312
doi	https://doi.org/10.52842/conf.acadia.2010.305
summary	The instrumental and aesthetic implications of architecture’s engagement with science and technology has a long history, part of which includes the period following the Second World War when the rapid technological advances of the Industrial Revolution merged with a general cultural mindset characterized by themes of progress and futurism. For postwar thinkers like Reyner Banham, this interest in a futurist architecture suggested an approach to design rooted less in architectural precedent than technological extrapolation. While a precedent based approach might be viewed as more disciplinary in nature, technological extrapolation suggests an inclination towards interdisciplinarity. Thus, Banham’s concept of extrapolation encouraged architects to look beyond the limits of their own discipline as a means of discovering new forms of knowledge and expertise. Indeed Banham was engaged in taking stock of the technological advances particular to his time while simultaneously anticipating the implication of these advancements for the future. To this extent, the postwar period and its inherent futurism provides a useful and poignant lens through which to take stock of our own technological climate. Given the equally revolutionary advances in computer technology in the last twenty years, our contemporary moment can be seen as having many parallels with the postwar period, and not unlike the postwar generation of architects and thinkers, contemporary designers are inevitably faced with the challenge of engaging new technological advances and their implications for architecture. In our current age of digital and biological technologies, these advances are both rapid and widespread, and include LED and fiber-optic lighting systems, motion sensing, interface design, solar tracking photovoltaic skins and wind harnessing technologies, magnetic levitation, and robotics. This paper begins with an examination of design work and criticism from the postwar period and proceeds to utilize that examination as an historical framework for addressing issues of contemporary design and 21st Century technological advancement.
keywords	Architecture, Anticipatory, Technology, Science
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ecaade2010_130
id	ecaade2010_130
authors	Sdegno, Alberto
year	2010
title	Digital Simulation of the City for Three Millions Inhabitants by Le Corbusier: Geometrical analysis, electronic reconstruction and video animation
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.549-556
doi	https://doi.org/10.52842/conf.ecaade.2010.549
wos	WOS:000340629400059
summary	The research that is presented describes the geometrical analysis and the digital reconstruction of one of the most important designs by Le Corbusier: the City of Three Millions Inhabitants; it represents one of the most impressive solutions of the idea of Future City done during the XX Century, and a lot of its architectural elements are now part of contemporary buildings. The aim of the research was to understand the main morphological aspects of it and compare the different solutions made by the author during his life, starting from the first public presentation in occasion of the Salon d’Automne in Paris (1922) and to reconstruct the 3D digital realistic-textured model of it, in order to realize the video that describes the whole project of the city; the research was done at the Faculty of Architecture of the IUAV University of Venice.
keywords	Le Corbusier; Urban design; Digital reconstruction; Simulation; Video
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2010_388
id	sigradi2010_388
authors	Triana, Trujillo Jhon Alejandro; Padilla Andres Felipe; Ordoñez Sergio; Hernández José Tiberio
year	2010
title	Methodology for Automatic Generation of Distributed Urban Spatial Models from GIS Data
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 388-391
summary	Urban spatial models are important to many professions, and they can be used in a wide range of urban decision - making applications. This paper describes a methodology for automatic generation of an urban spatial model from a GIS source. The methodology uses a Voronoi polygon - based method in order to split the urban space. After partitioning the GIS, functional characteristics are used to generate zones of interest at each Voronoi polygon. The paper also presents examples of applications of the model: a two dimensional model used for microsimulation of traffic, and a three - dimensional model used for simulation of air pollution.
keywords	mobility, urban model, Voronoi diagram, GIS, distributed system
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	ecaade2010_040
id	ecaade2010_040
authors	Akdag, Suzan Girginkaya; Cagdas, Gulen; Guney, Caner
year	2010
title	Analyzing the Changes of Bosphorus Silhouette
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.815-823
doi	https://doi.org/10.52842/conf.ecaade.2010.815
wos	WOS:000340629400087
summary	Due to improving technology and global competition today sky is the only limit for high towers of metropolitan areas. The increase in number of high rise has been ruining the silhouette of cities all over the world like Istanbul, whose identity and image have also been destroyed by skyscrapers dominating the seven slopes on which it was once built. The urbanization in Istanbul has somehow become homogenous and destructive over the topography. Despite of raising debates on the critical issue now and then, no analytical approach has ever been introduced. The research therefore, aims to analyze the change of Bosphorus silhouette caused by the emergence of high rise blocks in Zincirlikuyu-Maslak route since it was defined as a Central Business District and a high rise development area by Bosphorus Conservation Law in 1991. ArcGIS Desktop software and its analyst extensions are used for mapping, analyzing and evaluating the urban development within years. The application is considered to be the initial step for a decision support system which will assist in assigning ground for high rise buildings in Istanbul.
keywords	GIS; Bosphorus; Silhouette analysis; High rise buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2010_118
id	ecaade2010_118
authors	Araneda, Claudio
year	2010
title	Urban Protophenomenon: Introducing the notion of primordial phenomenon in urbanism
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.207-215
doi	https://doi.org/10.52842/conf.ecaade.2010.207
wos	WOS:000340629400022
summary	This paper aims to draw the necessary distinctions in order to contribute to identify, among all the objects that populate our world of perception, the urbanist´s own object of study. In systemic jargon, it aims to distinguish that elemental unity that ensures that a phenomenon is an urban one and none other. This, in order to help to distinguish in turn the urbanist´s own field of action. It calls into question the widespread belief that this object of study might be the already built city as current academic and professional tradition dictates and postulates instead the study of the urban protophenomenonalternatively, of the archetypal citizen- as a genuinely urban route for the attainment of urban knowledge.
keywords	Urban phenomenon; Architectural phenomenon; Urban protophenomenon; Architectural protophenomenon; Phenomenology
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2010_229
id	ecaade2010_229
authors	Aschwanden, Gideon D. P. A.; Wullschleger, Tobias; Müller, Hanspeter; Schmitt, Gerhard
year	2010
title	Agent based Emission Evaluation of Traffic in Dynamic City Models
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.717-726
doi	https://doi.org/10.52842/conf.ecaade.2010.717
wos	WOS:000340629400077
summary	We present a simulation platform to evaluate procedurally generated 3d city models with a set of agents representing urban street actors and pedestrians towards greenhouse gas emissions from transportation. Our aim is to give architects and urban planners an empiric tool to analyze, predict and quantify traffic fluctuations over time, and define the number of occupants, individual traffic and public transport in a city. In this project we show that the allocation of functions within a city is an important factor for the appearanceof traffic. The occupant’s decisions where they want to go are defined by the allocation of functions – and the distance defines the mode of transportation. We simulate the decision processes and gain information about the path, the mode of transportation, and the emissions they produce, and individual experiences like stress and effort. The autonomous driving cars are equipped with an acceleration based emission model allowing us to evaluate the inpact of jammed streets on the emission of cars.
keywords	Urban planning; Multi-agent system; Generative city model; Occupant movement; Traffic emission
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2010.457
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2010_084
id	ecaade2010_084
authors	Beirao, Jose; Mendes, Gelly; Duarte, Jose; Stouffs, Rudi
year	2010
title	Implementing a Generative Urban Design Model: Grammar-based design patterns for urban design
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.265-274
doi	https://doi.org/10.52842/conf.ecaade.2010.265
wos	WOS:000340629400028
summary	This paper shows the first results of a prototype implementation of a generative urban design tool. This implementation will form part of a design support tool for a GIS based platform defined to formulate, generate and evaluate urban designs. These three goals, formulation, generation and evaluation are integrated by connecting three modules developed individually for each goal. In this paper we focus on the implementation of the generation module showing a prototype developed on the Integrated Development Environment (IDE) of AutoCAD Civil 3D. This implementation attempts to encode the design moves of the urban planner into design patterns supported on grammar formalisms which allow for design synthesis and design exploration in the field of urban design.
keywords	Shape grammars; Design patterns; Generative urban design; CAD
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia10_333
id	acadia10_333
authors	Blough, Lawrence
year	2010
title	Digital Tracery: Fabricating Traits
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 333-339
doi	https://doi.org/10.52842/conf.acadia.2010.333
summary	Recently, prototyping enabled by CNC technology has found its way into design practice where concepts can be quickly and economically tested through multiple design iterations that closely approximate the realities of oneto- one construction. This has lead to the promise of renewed research in tectonics and constructional techniques where the traditional concepts of craft and the joint, that were once married to the hand, can be rediscovered through the agency of mass customization. If we apply the lineage of the trait—a representational and cognitive tool to marry complex form with the exigencies of construction—pedagogical approaches can be developed that extend the current interest in intricate surface, structural morphology and geometry towards a robust materiality rooted in componentry, the joint, and part-to-whole relationships. This paper will introduce several threads from the twentieth century that have informed these tendencies in contemporary design practice, emerging from the well spring of Viollet-le-Duc. The thesis is supported by undergraduate model-based research employing digital design and fabrication techniques.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2017_078
id	sigradi2017_078
authors	Brandão, Filipe; Ricardo Correia, Alexandra Paio
year	2017
title	Rhythms of Renewal of the City
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.534-540
summary	In the last few years, building renovation has gained an unprecedented relevance in Portugal, yet it is an asymmetric and urban phenomenon for the study of which, in space and in time, traditional statistic tools have limitations. Using computational tools, it is possible to generate maps that correlate building permits georeferenced data and their processing time. Using Lisbon City Hall database of planning applications and georeferenced vector information, two approaches are developed to represent the internal dynamic of renewal of the city between 2010 and 2016. These maps can be useful to improve the accessibility of planning information to citizens.
keywords	Urban renewal; Building renovation; Lisbon; Time; Representation
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ijac20108408
id	ijac20108408
authors	Brown, Andre; Nicholas Webb
year	2010
title	Examination of the Designs by Auguste Perret Using Digitally-Enabled Forensic Techniques
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 537
summary	This paper discusses how digitally-enabled techniques can be used to augment our understanding of a designer's work, particularly in relation to unbuilt or lost projects. In the first half of the twentieth century Auguste Perret gained international recognition for his buildings and we employ two of his unbuilt museums as the basis for illustration of the technique. Current knowledge of his unbuilt projects is based on surviving literature and incomplete illustrations. We show that the use of digitally-enabled techniques facilitates a fuller examination of the original material. Interpretation of material requires parallel studies into the architect, their influences and the context they operated within in order to extrapolate and fill gaps in an informed way. The construction of various digital representations enables a forensic analysis of the projects; consequently we can produce a richer set of information that can, in turn, enhance our analysis and understanding of an architect and their work, in this case, Perret.
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
doi	https://doi.org/10.52842/conf.caadria.2010.327
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: