Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 451

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2010_298
id	sigradi2010_298
authors	Barcellos, Góes Mariza; David Maria Manuela
year	2010
title	Visualization: The Contribution of a Mathematical Mediating Artefact for Creative Processes and Design Activities
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 298-300
summary	Considering mathematical knowledge as an artefact that mediates social activities in the world, this paper emphasizes the contribution of visual thinking to mathematics education and extends it to the learning of design activities, especially in architectural contexts. Results from a previous research paper on architectural design, which focused on the work of some contemporary architects in their day - to - day office activities, showed the relevance of drawing in architectural practice. These results aroused our interest in researching the mediating role of drawing and its structuring effects on creative processes and design activities in architecture.
keywords	visualization, mathematics education, architectural design education, activity theory
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2010_92
id	sigradi2010_92
authors	Barcellos, Góes Mariza; Menezes Alexandre
year	2010
title	O ensino de projeto de arquitetura: transições e desafios na sala de aula contemporânea [Teaching architecture design: transitions and challenges in the contemporary classroom]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 92-95
summary	This article presents an ongoing research project, the main aim of which is to investigate the teaching of architectural design, as well as to deepen the discussion on the role of drawing and architectural representation in the teaching and learning processes. The research conducts studies with design teachers through interviews and systematic classroom monitoring of architecture and urbanism courses. The theoretical frameworks that support this research and that are being used in the educational area to observe and understand practice are activity theory and situated learning.
keywords	design teaching and learning; design processes; drawing; sketches
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2010_019
id	caadria2010_019
authors	Herr, Christiane M.
year	2010
title	Stage-based design briefing beyond the waterfall model: tracing students’ design processes in relation to prescribed design stages throughout an architectural design studio
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 199-208
doi	https://doi.org/10.52842/conf.caadria.2010.199
summary	Based on visualisations of data obtained from field observations, this paper describes and discusses how a group of ten undergraduate students of architecture negotiated their ways through the tutorials of a design studio lasting 17 weeks. The main question guiding this empirical study is how the initially prescribed linear, stage-based framework of the design studio relates to design processes as experienced by participating students and as observed by myself as tutor and participant observer. Visualisations of tutorial observations show that instead of proceeding from one stage to the next sequentially, students tend to engage in continuous and parallel re-consideration of almost all aspects of their work. This results in a process that can be described as a cumulative and layered process, and illustrated as ‘fan’-shaped diagrams. The role of the design stages initially scheduled in the detailed studio brief seems to be to gradually introduce students to increasingly advanced and challenging project scopes rather than to enforce sequential design steps.
keywords	Design stages; design process; design education; data visualisation; tutorials
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2010_142
id	ecaade2010_142
authors	Labelle, Guillaume; Nembrini, Julien; Huang, Jeffrey
year	2010
title	Geometric Programming Framework: ANAR+: Geometry library for Processing
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.403-410
doi	https://doi.org/10.52842/conf.ecaade.2010.403
wos	WOS:000340629400043
summary	This paper introduces a JAVA based library for parametric modeling through programming. From the recent advent of scripting tools integrated into commercial CAAD software and everyday design practice, the use of programming applied to an architectural design process becomes a necessary field of study. The ANAR+ library is a parametric geometry environment meant to be used as programming interface by designers. Form exploration strategies based on parametric variations depends on the internal logic description, a key role for form generation. In most commercial CAD software, geometric data structures are often predefined objects, thus constraining the form exploration, whereas digital architectural research and teaching are in need for an encompassing tool able to step beyond new software products limitations. We introduce key concepts of the library and show a use of the library within a form finding process driven by irradiance simulation.
keywords	Processing; JAVA; Scene graph; Parametric modeling; Geometry
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ascaad2010_241
id	ascaad2010_241
authors	Aboreeda, Faten; Dina Taha
year	2010
title	Using Case-Based Reasoning to Aid Sustainable Design
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 241-246
summary	Since so far there exists only one planet, sustainable design is considered the (ethical) future in all fields of design. Although both architecture and construction are being considered major emitters of green house gases, a wise design not only can lead to minimizing this impact but it can also lead to restoring and regenerating the environment to a sustainable state. This paper presents an on-going research that aims at simplifying the elements and facilitating the process of sustainable design by using case-based reasoning. This is achieved through learning from past experiences; both good and bad ones, by providing a database application with a process-friendly interface which divides the main pillars of sustainable design into categories. Each building contains different stories related to different sustainable related issues. Each story can be repeated in /linked to many buildings. By providing designers with those past experiences, it is believed that deeper-studied designs can be more easily developed. Also a deeper analysis and understanding can be further implemented and produced with less effort for experienced and non-experienced architects in sustainable design. This would also decrease the consumption of time during the design process and encourage even more designers to integrate the sustainability concept into more designs. This research discusses the influence of sustainable design within the architectural domain, and suggests a computer application that aids architects during the preliminary design processes.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ijac20108403
id	ijac20108403
authors	Aksamija, Ajla; Ivanka Iordanova
year	2010
title	Computational Environments with Multimodal Representations of Architectural Design Knowledge
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 439
summary	This article discusses interaction between multimodal representations of architectural design knowledge, particularly focusing on relating explicit and implicit types of information. The aim of the presented research is to develop a computational environment that combines several modes of representation, including and integrating different forms of architectural design knowledge. Development of an interactive digital-models library and ontological model of architectural design factors are discussed, which are complementary in nature. In a time when BIM software is seen as embodiment of domain knowledge and the future medium of architectural design, this paper presents an interaction between ontological representation of architectural design knowledge and its embodiment in interactive models, thus focusing on the process of design and design space exploration. In the digital environments that we propose, representation of different formats of knowledge, such as visual, linguistic or numeric, are integrated with relational and procedural information, design rules, and characteristics. Interactive search and query based on contextual constraints, and parametric variation of the model based on the information received from ontology are the underlying drivers for design exploration and development.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2010_213
id	ascaad2010_213
authors	Babsail, Mohammad; Mahjoub Elnimeiri
year	2010
title	A Computer Process for Investigating Wind Power Production in Building Integrated Wind Turbines
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 213-220
summary	This paper reports on the computer process to be used in an ongoing research to investigate the effect of architectural parameters of tall buildings on the incorporation of wind turbines. The process combines a generative modeling tool (Grasshopper) and a performance based CFD tool (Virtualwind). The process is demonstrated on three typical tall building plan configurations. The wind speed was simulated at certain locations to demonstrate the ability of tall buildings to enhance the wind speed and thus maximize the energy produced by wind turbines located between twin towers. The process to predict wind power production is lastly listed.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_029
id	caadria2010_029
authors	Baerlecken, Daniel; Martin Manegold, Judith Reitz and Arne Kuenstler
year	2010
title	Integrative parametric form-finding processes
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 303-312
doi	https://doi.org/10.52842/conf.caadria.2010.303
summary	The recent developments in digital technologies and contemporary design tools are initiating new approaches of form-finding based on parametric development of multiple geometries with simultaneous consideration of various aspects. This paper focuses on the use of advanced parametric CAD systems and reformulated construction logics to enhance the potential and possibilities of form finding processes. This approach is exemplified through the “Greenhouse Trauttmansdorff project”. The project demonstrates a form finding approach which is based on defined parameters that not only fulfil aesthetic and functional aspects, but simultaneously take structural properties and the resulting sun shading behaviour into account. We will explore within this paper how – next to the functional and contextual building requirements – required illumination levels inside the greenhouse create a feedback loop between the structural system and its cladding system.
keywords	parametric representations; digital technologies; digital fabrication; variable systems; load bearing construction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2021_110
id	caadria2021_110
authors	Bao, Ding Wen, Yan, Xin, Snooks, Roland and Xie, Yi Min
year	2021
title	SwarmBESO: Multi-agent and evolutionary computational design based on the principles of structural performance
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 241-250
doi	https://doi.org/10.52842/conf.caadria.2021.1.241
summary	This paper posits a design approach that integrates multi-agent generative algorithms and structural topology optimisation to design intricate, structurally efficient forms. The research proposes a connection between two dichotomous principles: architectural complexity and structural efficiency. Both multi-agent algorithms and Bi-directional evolutionary structural optimisation (BESO) (Huang and Xie 2010), are emerging techniques that have significant potential in the design of form and structure.This research proposes a structural behaviour feedback loop through encoding BESO structural rules within the logic of multi-agent algorithms. This hybridisation of topology optimisation and swarm intelligence, described here as SwarmBESO, is demonstrated through two simple structural models. The paper concludes by speculating on the potential of this approach for the design of intricate, complex structures and their potential realisation through additive manufacturing.
keywords	Swarm Intelligence; Multi-agent; BESO (bi-directional evolutionary structural optimisation); Intricate Architectural Form; Efficient Structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2010_215
id	ecaade2010_215
authors	Barczik, Guenter
year	2010
title	Uneasy Coincidence? Massive Urbanization and New Exotic Geometries with Algebraic Geometry as an Extreme Example
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.217-226
doi	https://doi.org/10.52842/conf.ecaade.2010.217
wos	WOS:000340629400023
summary	We investigate the recent coincidence of rapid global urbanization and unprecedented formal freedom in architectural design and ask whether this coincidence is an uneasy one. To study an extreme case of the new exotic geometries made possible through CAAD, we employ algebraic surfaces to experimentally design architecture in an university-based research and experimental design project. Such surfaces exhibit unprecedented complexity and new geometric and topological features yet are highly sound and harmonious. We continue and extend our research presented at the eCAADe 2009 conference in Istanbul.
keywords	Algebraic geometry; Shape; Sculpture; design; Tool; Experiment; Methodology; Software
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia10_333
id	acadia10_333
authors	Blough, Lawrence
year	2010
title	Digital Tracery: Fabricating Traits
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 333-339
doi	https://doi.org/10.52842/conf.acadia.2010.333
summary	Recently, prototyping enabled by CNC technology has found its way into design practice where concepts can be quickly and economically tested through multiple design iterations that closely approximate the realities of oneto- one construction. This has lead to the promise of renewed research in tectonics and constructional techniques where the traditional concepts of craft and the joint, that were once married to the hand, can be rediscovered through the agency of mass customization. If we apply the lineage of the trait—a representational and cognitive tool to marry complex form with the exigencies of construction—pedagogical approaches can be developed that extend the current interest in intricate surface, structural morphology and geometry towards a robust materiality rooted in componentry, the joint, and part-to-whole relationships. This paper will introduce several threads from the twentieth century that have informed these tendencies in contemporary design practice, emerging from the well spring of Viollet-le-Duc. The thesis is supported by undergraduate model-based research employing digital design and fabrication techniques.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2010_065
id	ascaad2010_065
authors	Celani, Gabriela; Jose_ Duarte and Regiane Pupo
year	2010
title	Introducing Digital Fabrication Laboratories in Architecture Schools
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 65-74
summary	The present paper proposes a set of guidelines for the implementation of digital fabrication laboratories for education and research in architecture schools. These guidelines are based on authors´ experiences in creating two of such laboratories, one in Brazil and another one in Portugal. They are also based on visits to existing labs throughout the world and interviews with their coordinators. The objective is to help architecture schools plan new facilities or run recently established ones. For this reason, the chapter will be organized in topics and will include a checklist and some specific examples of equipment, software and results, as well as cost estimations. The issues addressed will include various aspects.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia11_186
id	acadia11_186
authors	Chaturvedi, Sanhita; Colmenares, Esteban; Mundim, Thiago
year	2011
title	Knitectonics
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 186-195
doi	https://doi.org/10.52842/conf.acadia.2011.186
summary	The project Knitectonics aims at exploring digital fabrication systems that facilitate optimized, adaptive and specific integrated architectural solutions (Male-Alemany 2010). It is inspired by the beauty of nature systems with their inherent efficiency and performance. The research explored on-site fabrication of monocoques shells, integrating skin and structure along with services and infrastructure, using a simple household technique. It thus embodies a self organized micro system of textures and a macro system of structures. This paper elaborates how the numeric aspects of a textile technique were used, first to digitally imitate the process of assembly and further exploited to develop and visualize a novel fabrication system, based on material research and technical experimentation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2010_028
id	caadria2010_028
authors	Chellappa, J. and H.-J. Park
year	2010
title	BIM + healthcare: on the view of a primary healthcare renovation project
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 293-302
doi	https://doi.org/10.52842/conf.caadria.2010.293
summary	Currently BIM is at the forefront of the building industry. While useful for various building types the definitive nature of healthcare design benefits from the BIM process largely in comparison to other building types. In this paper BIM is employed for phasing the design process of the healthcare project, creating modelling prototypes and making reference to a baseline model in order to increase the overall success of the healthcare design project.
keywords	Building information modelling; healthcare; evidence-based design; prototype; baseline model
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2010_078
id	ecaade2010_078
authors	Chiu, Yun-Ying
year	2010
title	How To Make The Soft Skin?: A preliminary framework for the parametric design of the bionic soft skin
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.237-242
doi	https://doi.org/10.52842/conf.ecaade.2010.237
wos	WOS:000340629400025
summary	This paper is a presentation of the preliminary framework for the design and fabrication of the soft-skin. Today, the digital technology applied in the architecture field is everywhere. However, there are still lots of fantastic free form architecture uncompleted and remained on the paper architecture or only the digital visual simulated model. Until now, most of the finished free form cases are consisted of the skin and bones, or only the bones. The complete soft-skin cases without the bones are fewer and the process remains untold. Based on the parametric environments and biology, how might you design a free form without the bones? How could you make the soft skin stand up? The research starts a series of exploration of the design and fabrication for the soft skin, and seeks to propose the preliminary framework as a helpful reference for the designers who deal with the soft skin project.
keywords	Soft skin; Bionic architecture; Parametric design; Grasshopper
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia10_117
id	acadia10_117
authors	Crotch, Joanna; Mantho, Robert; Horner, Martyn
year	2010
title	Social Spatial Genesis: Activity Centered Space Making
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 117-124
doi	https://doi.org/10.52842/conf.acadia.2010.117
summary	Digital technologies and processes have been used to generate architectural form for over two decades. Recent advances in digital technologies have allowed virtual digital environments to be constructed from physical movement. But can a bridge that connects the physical and virtual realms be developed? Can this, currently arbitrary form making be grounded in human activity and subsequently be integrated in to real time, space, and place. This research asks how space generated from the process of digital morphogenesis can be related to meaning beyond just the creation of form. Existing research asks how new form can be discovered, or what material and structural possibilities can be derived from form, through these morphological processes. The aim of this research project is to complete the loop, physical–virtual–physical, and to connect these digital processes to meaning through human activity. Its aim is to discover the consequences of generated spatial envelopes that are manipulated through digital morphogenesis and related to specific human activity, in the pursuit of possibilities for a digitally generated architecture that is socially engaged. This is not random form finding, wherein architecture tries to imitate biological processes or form, but form finding that is connected to a primary architectural concern, how is the architecture being used by humans.
keywords	Social digital morphogenesis, event based, motion capture
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia10_258
id	acadia10_258
authors	Doumpioti, Christina; Greenberg, Evan L.; Karatzas, Konstantinos
year	2010
title	Embedded Intelligence: Material Responsiveness in Façade Systems
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 258-262
doi	https://doi.org/10.52842/conf.acadia.2010.258
summary	This paper presents recent research for new mechanical systems and façade designs that are able to respond to environmental changes through local interactions, inspired by biological systems. These are based on a model of distributed intelligence founded on insect and animal collectives, from which intelligent behavior emerges through simple local associations. Biological collective systems integrate material form and responsiveness and have the potential to inform new architectural and engineering strategies. The proposed façade system uses integrated sensors and actuators that moderate their local environments through simple interactions with their immediate neighbors. Computational techniques coupled to manufacturing methods and material logics create an integral design framework leading to heterogeneous environmental and structural conditions, producing local responses to environmental stimuli, and ultimately, effective performance of the whole system.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

For more results click below: