Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 452

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2010_040
id	ecaade2010_040
authors	Akdag, Suzan Girginkaya; Cagdas, Gulen; Guney, Caner
year	2010
title	Analyzing the Changes of Bosphorus Silhouette
doi	https://doi.org/10.52842/conf.ecaade.2010.815
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.815-823
summary	Due to improving technology and global competition today sky is the only limit for high towers of metropolitan areas. The increase in number of high rise has been ruining the silhouette of cities all over the world like Istanbul, whose identity and image have also been destroyed by skyscrapers dominating the seven slopes on which it was once built. The urbanization in Istanbul has somehow become homogenous and destructive over the topography. Despite of raising debates on the critical issue now and then, no analytical approach has ever been introduced. The research therefore, aims to analyze the change of Bosphorus silhouette caused by the emergence of high rise blocks in Zincirlikuyu-Maslak route since it was defined as a Central Business District and a high rise development area by Bosphorus Conservation Law in 1991. ArcGIS Desktop software and its analyst extensions are used for mapping, analyzing and evaluating the urban development within years. The application is considered to be the initial step for a decision support system which will assist in assigning ground for high rise buildings in Istanbul.
wos	WOS:000340629400087
keywords	GIS; Bosphorus; Silhouette analysis; High rise buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2010_189
id	ascaad2010_189
authors	Allahaim, Fahad; Anas Alfaris and David Leifer
year	2010
title	Towards Changeability
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 189-200
summary	Many buildings around the world have undergone successive changes over their life cycles. Regardless of the type or size of a building there are usually requirements for change due to several unanticipated forces and emerging uncertainties that act upon them. These changes might be in the building’s spatial, structural or service systems. This can be due to changes in the needs of occupants, the market demand or technological advances. Although buildings undergo change, current design practice does not address this and buildings are still designed as if they will remain static. This paper proposes an Adaptable Buildings Design (ABD) Framework to address the issue of adaptability in building design. Using this methodology uncertainties and future changes are first identified. To increase the building’s longevity, flexibility options are embedded and design rules are formulated to trigger these options when necessary. The value of adaptability is then assessed by implementing several simulations using Real Options Analysis (ROA). To demonstrate the approach, the ABD is applied to a multi-use commercial building case study. Flexibility is embedded in the building’s design across several systems allowing it to change and evolve over time based on a set of design rules. The buildings adaptability is then assessed using ROA. Positive results demonstrate the strength of the proposed methodology in addressing future change and uncertaintie.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2010_055
id	caadria2010_055
authors	Chen, Zi-Ru; Chung-Yang Wang, Pei-Chien Hung and Yu-Tung Liu
year	2010
title	Preliminary tectonic phenomena of diversified architectural spatial forms in digital age
doi	https://doi.org/10.52842/conf.caadria.2010.599
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 599-608
summary	The research on tectonics in the architectural field began from the middle of nineteenth century and in recent twenty years digital technology gradually developed and permeated through the field of architecture. Liu and Lim (2006, 2009) integrated classic and digital tectonic factors a present framework of new tectonics. However, the previous studies related to the tectonics in this digital age were only on architectural cases that use a great deal of digital media. The research wants to know what and how the tectonic factors affect the different spatial forms of modern architecture and focused on a case study of the diversified spatial forms, orthogonal, folding and curving. The results show the classic tectonic thinking is imperative until now. It is critical to prove the significance of adding the new digital tectonic factors in digital age.
keywords	Digital and classic tectonics; spatial form; digital media
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2010_109
id	ascaad2010_109
authors	Hamadah, Qutaibah
year	2010
title	A Computational Medium for the Conceptual Design of Mix-Use Projects
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 109-116
summary	Mix use development is receiving wide attention for its unique sustainable benefits. Nevertheless, the planning and designing of successful mixed use projects in today's environment is a complex matrix of skill sets and necessary collaborations between various stakeholders and design professionals. From a design point of view, architects are required to manage and coordinate large information sets, which are many time at odds with one another. The expansive space of knowledge and information is at its best vague and substantially ill-structured. A situation that continues to overburden architects mental and intellectual ability to understand, address and communicate the design issue. In the face of this complex condition, designers are gravitating towards information modeling to manage and organize the expansive data. However, is becoming increasingly evident that current building information modeling applications are less suited for early design activity due to their interrupted and rigid workflows. Against this background, this paper presents a theoretical framework for a computational medium to support the designer during early phases of exploring and investigating design alternatives for mix-use projects. The focus is on the conjecture between programming and conceptual design phase; when uncertainty and ambiguity as at its maximum, and the absence of computational support continues to be the norm. It must be noted however, the aim of the medium is not to formulate or automate design answers. Rather, to support designers by augmenting and enhancing their ability to interpret, understand, and communicate the diverse and multi-faceted design issue. In literature on interpretation, Hans-Georg Gadamer explains that understanding is contingent on an act of construction. To understand something is to construct it. In light of this explanation. To help designers understand the design issue, is to help them construct it. To this end, the computational medium discussed in this paper is conceived to model (construct) the mix-use architectural program. In effect, turning it into a dynamic and interactive information model in the form of a graph (network). This is an important development because it will enable an entirely new level of interaction between the designer and the design-problem. It will allow the designer to gather, view, query and repurpose the information in novel ways. It will offer the designer a new context to foster knowledge and understanding about the ill-structured and vague design issue. Additionally, the medium would serve well to communicate and share knowledge between the various stakeholders and design professionals. Central to the discussion are two questions: First, how can architects model the design program using a graph? Second, what is the nature of the proposed computational medium; namely, its components and defining properties?
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_019
id	caadria2010_019
authors	Herr, Christiane M.
year	2010
title	Stage-based design briefing beyond the waterfall model: tracing students’ design processes in relation to prescribed design stages throughout an architectural design studio
doi	https://doi.org/10.52842/conf.caadria.2010.199
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 199-208
summary	Based on visualisations of data obtained from field observations, this paper describes and discusses how a group of ten undergraduate students of architecture negotiated their ways through the tutorials of a design studio lasting 17 weeks. The main question guiding this empirical study is how the initially prescribed linear, stage-based framework of the design studio relates to design processes as experienced by participating students and as observed by myself as tutor and participant observer. Visualisations of tutorial observations show that instead of proceeding from one stage to the next sequentially, students tend to engage in continuous and parallel re-consideration of almost all aspects of their work. This results in a process that can be described as a cumulative and layered process, and illustrated as ‘fan’-shaped diagrams. The role of the design stages initially scheduled in the detailed studio brief seems to be to gradually introduce students to increasingly advanced and challenging project scopes rather than to enforce sequential design steps.
keywords	Design stages; design process; design education; data visualisation; tutorials
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac20108205
id	ijac20108205
authors	Holzer, Dominik
year	2010
title	Optioneering in Collaborative Design Practice
source	International Journal of Architectural Computing vol. 8 - no. 2, 165-182
summary	The discourse about computational support of collaborative architectural design has in recent years mainly focused on the topic of Building Information Modeling (BIM). In this paper, the method of ‘optioneering’ is presented that, in contrast to current BIM capabilities, assists designers and consultants to resolve design problems through integrated analyses across disciplines in the early stages of design. Although the method of ‘optioneering’ has only recently been adapted in building practice, it has been preceded by manifold efforts by researchers in the field of design and computation over the past two decades.At the end of this paper the computational framework ‘DesignLink’ will be discussed.‘DesignLink’ supports ‘optioneering’ in the design stages before BIM becomes effective and it is currently being developed and used to support performance optimisation of building projects in practice.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2010_117
id	ecaade2010_117
authors	Koenig, Reinhard; Thurow, Torsten; Braunes, Jo_rg; Tonn, Christian; Donath, Dirk; Schneider, Sven
year	2010
title	FREAC: A Technical Introduction to a Framework for Enhancing Research in Architectural Design and Communication
doi	https://doi.org/10.52842/conf.ecaade.2010.445
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.445-451
summary	This paper describes a framework for a collaborative, dynamically modifiable product model called FREAC built for the purposes of experimental software development. When developing FREAC, we attempted to realise the following properties that are typically lacking in currently available commercial systems: first, a high degree of flexibility so that it is highly adaptable to the needs of different disciplines; second, the ability to seamlessly connect different tools; third, real-time concurrent modelling by different remote partners; fourth, the ability to save a record of the entire modelling process; fifth, dynamic extensibility both for software developers as well as for the end users of the respective tools.
wos	WOS:000340629400048
keywords	Software development; Experimental platform; Product model; Digital building model
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2010_167
id	ecaade2010_167
authors	Kunze, Antje; Schmitt, Gerhard
year	2010
title	A Conceptual Framework for the Formulation of Stakeholder Requirements
doi	https://doi.org/10.52842/conf.ecaade.2010.697
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.697-705
summary	We need to face challenging needs for the planning of sustainable future cities. New methods in urban simulation enhance significantly the early urban design phase. However, these promising methods will only be sustainable if they consider stakeholder participation from the very beginning. Therefore we propose a conceptual framework for the formulation of stakeholder requirements, which enables the iterative modification of an urban model inside participatory workshops. A special emphasis concentrates on environmental, social and economical factors. The requirements posed by the stakeholders are instantly transferred into urban design patterns. Each single pattern stands for a solution for a specific problem that is integrated and visualized in a procedural model. Our goal is to create a participatory process that takes advantages by the use of comprehensive urban design patterns. The results are integrated within an interactive procedural model that communicate the most important guidelines for the planning of sustainable future cities.
wos	WOS:000340629400075
keywords	Decision-making process; Stakeholder participation; Shape grammars; Urban patterns; Urban planning
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2023_395
id	caadria2023_395
authors	Luo, Jiaxiang, Mastrokalou, Efthymia, Aldaboos, Sarah and Aldabous, Rahaf
year	2023
title	Research on the Exploration of Sprayed Clay Material and Modeling System
doi	https://doi.org/10.52842/conf.caadria.2023.2.231
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 231–240
summary	As a traditional building material, clay has been used by humans for a long time. From early civilisations, to the modern dependence on new technologies, the craft of clay making is commonly linked with the use of moulds, handmade creations, ceramic extruders, etc. (Schmandt and Besserat, 1977). Clay in the form of bricks is one of the oldest building materials known (Fernandes et al, 2010). This research expands the possibilities offered by standardised bricks by testing types of clay, forms, shapes, porosity, and structural methods. The traditional way of working with clay relies on human craftsmanship and is based on the use of semi-solid clay (Fernandes et al., 2010). However, there is little research on the use of clay slurry. With the rise of 3D printing systems in recent years, research and development has been emerging on using clay as a 3D printing filament (Gürsoy, 2018). Researchers have discovered that in order for 3D-printed clay slurry to solidify quickly to support the weight of the added layers during printing, curing agents such as lime, coal ash, cement, etc. have to be added to the clay slurry. After adding these substances, clay is difficult to be reused and can have a negative effect on the environment (Chen et al., 2021). In this study, a unique method for manufacturing clay elements of intricate geometries is proposed with the help of an internal skeleton that can be continuously reused. The study introduces the process of applying clay on a special structure through spraying and showcases how this method creates various opportunities for customisation of production.
keywords	Spray clay, Substructure, 3D printing, Modelling system, Reusable
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	acadia10_305
id	acadia10_305
authors	Perry, Chris
year	2010
title	Anticipatory Architecture \| Extrapolative Design
doi	https://doi.org/10.52842/conf.acadia.2010.305
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 305-312
summary	The instrumental and aesthetic implications of architecture’s engagement with science and technology has a long history, part of which includes the period following the Second World War when the rapid technological advances of the Industrial Revolution merged with a general cultural mindset characterized by themes of progress and futurism. For postwar thinkers like Reyner Banham, this interest in a futurist architecture suggested an approach to design rooted less in architectural precedent than technological extrapolation. While a precedent based approach might be viewed as more disciplinary in nature, technological extrapolation suggests an inclination towards interdisciplinarity. Thus, Banham’s concept of extrapolation encouraged architects to look beyond the limits of their own discipline as a means of discovering new forms of knowledge and expertise. Indeed Banham was engaged in taking stock of the technological advances particular to his time while simultaneously anticipating the implication of these advancements for the future. To this extent, the postwar period and its inherent futurism provides a useful and poignant lens through which to take stock of our own technological climate. Given the equally revolutionary advances in computer technology in the last twenty years, our contemporary moment can be seen as having many parallels with the postwar period, and not unlike the postwar generation of architects and thinkers, contemporary designers are inevitably faced with the challenge of engaging new technological advances and their implications for architecture. In our current age of digital and biological technologies, these advances are both rapid and widespread, and include LED and fiber-optic lighting systems, motion sensing, interface design, solar tracking photovoltaic skins and wind harnessing technologies, magnetic levitation, and robotics. This paper begins with an examination of design work and criticism from the postwar period and proceeds to utilize that examination as an historical framework for addressing issues of contemporary design and 21st Century technological advancement.
keywords	Architecture, Anticipatory, Technology, Science
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ecaade2010_000
id	ecaade2010_000
authors	Schmitt, Gerhard; Hovestadt, Ludger; Van Gool, Luc; Bosché, Frédéric; Burkhard, Remo; Colemann, Suzanne; Halatsch, Jan; Hansmeyer, Michael; Konsorski-Lang, Silke; Kunze, Antje; Sehmi-Luck, Martina (eds.)
year	2010
title	FUTURE CITIES
doi	https://doi.org/10.52842/conf.ecaade.2010
source	28th eCAADe Conference Proceedings [ISBN 978-0-9541183-7-2], ETH Zurich (Switzerland) 15-18 September 2010, 904 p.
summary	Future Cities – the title of the 2010 eCAADe Conference describes one of the major challenges of the 21st century. The conference theme is a logical evolution from previous years in that it expands the focus of interest from the building to larger scales and higher complexity. The conference contributions describe methods and instruments that were developed in the last three decades and apply them to city and territorial planning. The eCAADe proceedings demonstrate that CAAD research and education of the past prepared the ground for the future and for the increased responsibility of the CAAD community. The population of cities has developed worldwide from a minority to the majority. Cities are the largest, most complex and most dynamic man-made systems. As vibrant centres of cultural life and of mega events, they are engines that drive local and global economies. However, their growth was in the fewest cases determined by sustainability goals. As a result, contemporary metropolitan territories are often environmentally, socially and economically unsustainable entities placing increasing pressure on the surrounding rural areas. No longer do traditional methods support the planning and managing of large cities – these methods have reached their limits. Parallel to the revolution in the design of buildings, we need a radical re-thinking of the planning, design, development and management process of cities and urban-rural systems. Compared to buildings, urban and rural systems involve a much higher number of stakeholders and decision makers. We need to study and simulate the effects and side effects of urban-rural planning or re-development much earlier in the process than normally done today. The goal seems clear: the transformation of existing and the planning of new sustainable urban-rural systems. As ordering principles we can build on experiences with building architecture. Complexity, dynamics, scale, and the urban metabolism evolve as promising research and education areas.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ascaad2010_075
id	ascaad2010_075
authors	Schubert, Gerhard; Kaufmann Stefan and Petzold Frank
year	2010
title	Project Wave 0.18
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 75-88
summary	In recent years a number of projects have been emerged, in which the new possibilities of the computer as a design tool, have been used. Through the digital chain from design to manufacturing the efficiency has increased and allows the implementation of complex architectural structures. With all these new opportunities, also new challenges arise in the teaching and the educational concepts. The paper describes the detailed course concept and the didactic strategy using the example of a parametric designed roof structure, we designed, planed and build up in scale 1:1 within the main course. „Wendepunkt\|e im Bauen“ (Turning point\|s of building) is the name of an exhibition at the “Pinakothek der Moderne” in Spring 2010. In addition to contributions of the industrialization in the building industry from 1850 to the present day, the exhibition also serves as a platform, to demonstrate new possibilities of computer-aided parametric design and the closely related computer aided manufacturing (CAM). In this context, we took the chance to build a sculpture in Scale 1:1 to show the potential of a constant digital workflow and the digital fabrication. Through the digital chain from design to manufacturing, the efficiency has been increased by the computer and allows the implementation of new complex architectural structures. But the efficiency of the high-degree-automation through the use of computerized machines usually ends in the production of the components. Because this coincidence of the elements in the assembly often proves cost and time, the aim of the project was to optimize both, the production of components and their assembly as well. As part of the wintercourse 2009/2010 different aspects of automation have been reviewed and new solutions have been analyzed. Together with 15 students of the Faculty of Architecture the complete digital chain started with the first design ideas, about parametric programming through production and assembly had been researched, implemented and brought to reality. In the first steps, the students had to learn about the potential, but also about the problems coming with the digital-design and the attached digital-production. There for the course took part at our computerlab. In weekly workshops, all ideas have been implemented and tested directly in the 3-dimensional parametric model. And thanks to the interdisciplinary work with the Department of Structural Design also static factors had been considered, to optimize the form. Parallel to the digital form-finding process, the first prototypes have been produced by the students. By using the chairs 3D-CNC-Mills we were able to check the programmed connection detail in reality and apply the so learned lessons to the further development. After nearly 3 month of research, designing, planning and programming, we were able to produce the over 1000 different parts in only 4 days. By developing a special pre-stressed structure and connection detail it was also possible, to assemble the whole structure (13.5m x 4.5m x 4m) in only one day. The close connection between digital design (CAD) and digital manufacturing (CAM) is an important point of our doctrine. By the fact, that the students operate the machines themselves, but also implement projects on a scale of 1:1, they learn to independently evaluate these new tools and to use them in a meaningful way.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia10_000
id	acadia10_000
authors	Sprecher, Aaron; Yeshayahu, Shai and Lorenzo-Eiroa, Pablo (eds.)
year	2010
title	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture
doi	https://doi.org/10.52842/conf.acadia.2010
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), 411 p.
summary	The ACADIA 2010 conference will focus on the changing nature of information and its impact on architectural education, research and practice. With the ever-increasing integration of information technologies in the design laboratory, the discipline of architecture has changed profoundly in recent years. The emerging fields of digital fabrication, generative and evolutionary modeling among others, are now at the core of investigations in a growing community of digital design practitioners and researchers. ACADIA 2010 will explore the ways designers, architects, engineers and scientists collect, analyze and assemble information through computational systems that redefine the notions of design performance and optimization, evolutionary and responsive models. These notions are today inherently related to the possibilities and limitations offered by our increasing computational capabilities, and the way information shapes relations between the human, the environment, and the machine. ACADIA 2010 will gather leading practitioners, theorists, and researchers who will examine the relation that architecture has with technology and information, and how the latter propels today’s most innovative design experimentations and research. The conference will be centered on a series of peer-reviewed paper sessions and a groundbreaking exhibition including peer-reviewed projects.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	caadria2010_010
id	caadria2010_010
authors	Tan, Beng-Kiang and Stephen Lim Tsung Yee
year	2010
title	Place and placelessness in 3D online virtual world
doi	https://doi.org/10.52842/conf.caadria.2010.103
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 103-112
summary	This paper examines the issue of place-making in 3D virtual world from the design point of view. It aims to find out what are the elements to create a sense of place. As Second Life currently has the largest users among 3D virtual worlds, it is selected as a study case. The methodology consists of theoretical studies and ethnographic observation. Firstly, literature review of theories regarding place-making in the physical world and the virtual world were done. From that a framework was formulated as a common basis for ethnographic observations and interviews at three real world public spaces and four locations in Second Life. This paper presents findings from the latter. The focus areas are physical settings, activities and experience of users. The observations are discussed and criteria for place-making in multiuser 3D online virtual environments are proposed. This paper will contribute to the understanding of how to design a place rather than space in 3D online virtual world.
keywords	3D virtual world; Second Life; place-making; multiuser online virtual environment
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2010_219
id	ecaade2010_219
authors	Tuncer, Bige; Sariyildiz, Sevil
year	2010
title	Facilitating Architectural Communities of Practice
doi	https://doi.org/10.52842/conf.ecaade.2010.707
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.707-716
summary	An architectural community of practice is formed by designers working together on a common goal. Members of this community share a common professional language where the vocabulary of this language represents a shared understanding. Members of a community of practice operate both by recording common knowledge into documents and by actively participating in social processes in order to personally contextualize this recorded knowledge. ArcIMap is a framework, consisting of a method and a computational model, that facilitates communities of practice to acquire, represent, share and reusedesign information and knowledge, and targets the creation of situated digital environments where teams of designers communicate and collaborate using this information and knowledge. This paper describes ArcIMap, its background, and one of its implementations for a community of practice working on an urban renewal project in an educational context.
wos	WOS:000340629400076
keywords	Community of practice; Correspondence; Complex information structure; Information modeling; Urban design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2010_085
id	ecaade2010_085
authors	Ulu, Ebru Arkut; Arkut, Burcu; Gun, Onur Yuce
year	2010
title	Future Community in Istanbul: An interpretation of Istanbul to generate a new urban life
doi	https://doi.org/10.52842/conf.ecaade.2010.295
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.295-303
summary	The parametric design techniques are developed over the past 15 years. And a new style called parametricism is born, which is the style rooted in digital animation techniques. The parametricism is based on the advanced parametric design systems and scripting method (Schumacher, 2009). This study is the research of defining the city of Istanbul and the skyscraper together in the sense of the parametricism. The result is expected to be a self-sufficient urban living proposal by using generative and parametric tools and scripting techniques. The other purpose of this study is to examine the relationship between the skyscraper and the natural world, and the urban living.
wos	WOS:000340629400031
keywords	Skyscraper; Istanbul; Banyan tree; Upwards and downwards growth; Shape grammar
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2010_171
id	ecaade2010_171
authors	Achten, Henri; Kopriva, Milos
year	2010
title	A Design Methodological Framework for Interactive Architecture
doi	https://doi.org/10.52842/conf.ecaade.2010.169
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.169-177
summary	Interactive architecture is a fairly recent phenomenon enabled through new materials and technologies. Through experimentation architects are coping with questions of changeability, adaptability, and interaction. However, there are no comprehensive design methods to support this type of architecture. In this paper we aim to bring together methods that can support the design of interactive architecture. The methods are ordered in a methodological framework that provides an overview of possible approaches.
wos	WOS:000340629400018
keywords	Design methods; Interactive architecture
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: