Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 451

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2011_052
id	caadria2011_052
authors	Al-Kazzaz, Dhuha A. and Alan Bridges
year	2011
title	Assessing innovation in hybrid designs using shape grammars
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 545-554
doi	https://doi.org/10.52842/conf.caadria.2011.545
summary	Al-kazzaz et al (2010) described hybrid adaption technique to generate innovative designs from heterogeneous precedents using shape grammars. An evaluation of the degree of innovation in the hybrid designs gave feedback to grammar users before and after applying a rule. Innovation was assessed using variables derived from the internal structure of the grammar such as: the number of antecedents in the corpus having the same rule; the number of rules in a subclass rule set having the same geometry; etc. However, the validity of the innovation assessment was unclear and the use of the feedback measures was not demonstrated. Accordingly, this study aims to verify the credibility of the innovation measures and to identify the independent variables that a user can control to achieve a significant impact on each innovation measure as a dependent variable.
keywords	Shape grammars; hybrid design; innovation assessment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2010_022
id	ecaade2010_022
authors	Al-kazzaz, Dhuha; Bridges, Alan; Chase, Scott
year	2010
title	Shape Grammars for Innovative Hybrid Typological Design
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.187-195
doi	https://doi.org/10.52842/conf.ecaade.2010.187
wos	WOS:000340629400020
summary	This paper describes a new methodology of deriving innovative hybrid designs using shape grammars of heterogeneous designs. The method is detailed within three phases of shape grammars: analysis, synthesis and evaluation. In the analysis phase, the research suggests that original rules of each design component are grouped in subclass rule sets to facilitate rule choices. Additionally, adding new hybrid rules to original rules expands the options available to the grammar user. In the synthesis phase, the research adopts state labels and markers to drive the design generation. The former is implemented with a user guide grammar to ensure hybridity in the generated design, while the latter aims to ensure feasible designs. Lastly evaluation criteria are added to measure the degree of innovation of the hybrid designs. This paper describes the derivation of hybrid minaret designs from a corpus of heterogeneous traditional minaret designs.
keywords	Shape grammar; Parallel grammar; Hybrid design; Typology
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2010_084
id	ecaade2010_084
authors	Beirao, Jose; Mendes, Gelly; Duarte, Jose; Stouffs, Rudi
year	2010
title	Implementing a Generative Urban Design Model: Grammar-based design patterns for urban design
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.265-274
doi	https://doi.org/10.52842/conf.ecaade.2010.265
wos	WOS:000340629400028
summary	This paper shows the first results of a prototype implementation of a generative urban design tool. This implementation will form part of a design support tool for a GIS based platform defined to formulate, generate and evaluate urban designs. These three goals, formulation, generation and evaluation are integrated by connecting three modules developed individually for each goal. In this paper we focus on the implementation of the generation module showing a prototype developed on the Integrated Development Environment (IDE) of AutoCAD Civil 3D. This implementation attempts to encode the design moves of the urban planner into design patterns supported on grammar formalisms which allow for design synthesis and design exploration in the field of urban design.
keywords	Shape grammars; Design patterns; Generative urban design; CAD
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia10_357
id	acadia10_357
authors	Brell-Cokcan, Sigrid; Braumann, Johannes
year	2010
title	A New Parametric Design Tool for Robot Milling
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 357-363
doi	https://doi.org/10.52842/conf.acadia.2010.357
summary	This paper proposes the use of parametric design software, which is generally used for real-time analysis and evaluation of architectural design variants, to create a new production immanent design tool for robot milling. Robotic constraints are integrated in the data flow of the parametric model for calculating, visualizing and simulating robot milling toolpaths. As a result of the design process, a physical model together with a milling robot control data file is generated.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia10_218
id	acadia10_218
authors	Chok, Kermin; Donofrio, Mark
year	2010
title	Structure at the Velocity of Architecture
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 218-226
doi	https://doi.org/10.52842/conf.acadia.2010.218
summary	This paper outlines a digital design workflow, utilized by the authors, which actively links the geometry platforms being utilized by architects with tools for structural analysis, design, form-finding, and optimization. This workflow leads to an accelerated generation and transfer of information to help guide and inform the design process. The engineering team is thus empowered to augment the architect’s design by ensuring that the design team is conscious of the structural implications of design decisions throughout the design process. A crucial element of this design process has been the dynamic linkage of parametric geometry models with structural analysis and design tools. This reduces random errors in model generation and allows more time for critical analysis evaluation. However, the ability to run a multitude of options in a compressed time frame has led to ever increasing data sets. A key component of this structural engineering workflow has become the visualization and rigorous interpretation of the data generated by the analysis process. The authors have explored visualization techniques to distill the complex analysis results into graphics that are easily discernable by all members of the design team.
keywords	Workflows, Structure, Collaboration, Visualizations, Analysis
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ijac20108301
id	ijac20108301
authors	Chok, Kermin; Mark Donofrio
year	2010
title	Abstractions for information based design
source	International Journal of Architectural Computing vol. 8 - no. 3, pp. 233-256
summary	This paper discusses how live linkages between parametric geometry, structural analysis and optimization can be leveraged to explore an architectural massing from different perspectives of optimum assuming a set of cost and value characteristics. Broad performance measures such as program area, cladding surface and structural quantities were computed for each geometry variation and collected. Optimums from different perspectives (structure, developer, designer) were extracted for each height category and compared. To further inform and engage stakeholders, a variety of visualization and filtering techniques have been implemented. These new techniques and associated distillation of data aids the design team in understanding the design space. A script based approach towards geometry and data management has led to a shift towards active option evaluation and a more interactive approach to form exploration. A generic workflow for structural analysis, design and optimization has been implemented and this ability to engineer at a greater velocity will move the design profession towards a more collaborative and information based design environment.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2010_260
id	sigradi2010_260
authors	Christakou, Evangelos D.
year	2010
title	Luz natural: avaliação dinâmica e interativa nos ambientes arquitetônicos virtuais [Natural light: assessment in dynamic and interactive virtual architectural environments]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 260-263
summary	Real time walkthrough is a valuable resource, especially in the early stages of the design process. Assessing how shadows and reflections behave enables architects to make better choices regarding materials, geometry and lighting. Traditional methods do not offer daylight simulations in real time, whereas interactive visualization requires large computational resources to allow an evaluation of behavior of light in architectural space. This project researched virtual environments that permit the real - time generation of interactive scenes that simulate natural light algorithms modeled. The goal of this is to meet the needs of architects when evaluating the changes of a dynamic and synchronous project.
keywords	computer simulation, real - time rendering, architectural walkthrough
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	acadia10_110
id	acadia10_110
authors	Di Raimo; Antonino
year	2010
title	Architecture as Caregiver: Human Body - Information - Cognition
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 110-116
doi	https://doi.org/10.52842/conf.acadia.2010.110
summary	Recent studies in contemporary architecture have developed a variety of parameters regarding the information paradigm which have consequently brought different results and techniques to the process of architectural design. Thus, the emergence of an ecological thinking environment and its involvement in scientific matters has determined links moving beyond the conventional references that rely on information. It is characterized as an interconnected and dynamic interaction, concerning both a theoretical background and providing, at the same time, appropriate means in the architectural design process (Saggio, 2007, 117). The study is based on the assumption that Information Theory leads into a bidirectional model which is based on interaction. According to it, I want to emphasize the presence of the human body in both the architectural creation process and the use of architectural space. The aim of my study, is consequently an evaluation of how this corporeal view related to the human body, can be organized and interlinked in the process of architectural design. My hypothesis relies on the interactive process between the information paradigm and the ecological one. The integration of this corporeal view influences the whole process of architectural design, improving abilities and knowledge (Figure 1). I like to refer to this as a missing ring, as it occurs within a circular vital system with all its elements closely linked to each other and in particular, emphasizes architecture as a living being.
keywords	Architecture, information paradigm, human body, corporeity, cognitive Science, cognition,circularity, living system
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2010_053
id	ecaade2010_053
authors	Felasari, Sushardjanti; Peng, Chengzhi
year	2010
title	Enhancing A Virtual City with Collective Memory: A pilot study of Jalan Malioboro in Yogyakarta
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.825-831
doi	https://doi.org/10.52842/conf.ecaade.2010.825
wos	WOS:000340629400088
summary	The paper reports on a pilot study of how a virtual city can be enhanced by interlinking elements of the 3D city model with the city’s collective memory represented in various digital formats. A particular street called Jalan Malioboro in Yogyakarta Indonesia has been modeled and hosted on Google Earth. Through the questionnaires returned by the participating students, we also investigate how collective memory enhanced virtual city (CREATI) could help learners to achieve goals of a particular course. The study shows that CREATI helps students to analyze the task given by providing more historical information related to the street. However it also needs further refinement and evaluation by introducing more interactive features such as enabling students to upload their own design proposals and to post additional information related to the buildings or places.
keywords	City modeling; Collective memory; Virtual city; Google Earth; Architectural and urban design; Jalan Malioboro; e-Learning
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2010_021
id	ecaade2010_021
authors	Gil, Jorge; Beirao, Jose; Montenegro, Nuno; Duarte, Jose
year	2010
title	Assessing Computational Tools for Urban Design: Towards a “city information model”
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.361-369
doi	https://doi.org/10.52842/conf.ecaade.2010.361
wos	WOS:000340629400038
summary	This paper presents an assessment of a selection software tools for urban design confronting their capabilities with the goals of the CityInduction research project. The goal of this paper is the assessment of existing platforms for computer aided urban design to select one as the basis for implementing the urban design model proposed in the CityInduction project. This model includes three sub-models that support the formulation of design programs from contextual information, the exploration of designs solutions through a grammarbased generative approach, and the validation of designs against the program through the use of evaluation tools. To each of these sub-models corresponds a module in the envisioned platform and so, existing platforms are assessed in terms of their ability to support the implementation of each module. The current goal is a proof-of-concept implementation, but the final goal is the development of a complete platform for supporting urban design.
keywords	Software review; Sustainable urban design; GIS; CAAD; BIM
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ijac20108105
id	ijac20108105
authors	Grobman, Yasha Jacob; Abraham Yezioro; Isaac Guedi Capeluto
year	2010
title	Non-Linear Architectural Design Process
source	International Journal of Architectural Computing vol. 8 - no. 1, 41-54
summary	The introduction of the computer to the architectural design process have facilitated the possibility to examine a large number of design alternatives by allowing continuous variation between pre defined constraints. However, for the most part, evaluation and comparison of the alternatives is still handled manually in a linear fashion by the designer. This paper introduces a different approach to the architectural design process, which calls for a multithreaded or a non-linear design process. In a non-linear design process design directions and alternatives are generated, presented and evaluated simultaneously, and in real time. As an example for a non-linear design process the Generative Performance Oriented Design model and software tool (GenPOD) are presented and discussed. Moving towards non-linear modes of design arguably increases design creativity by allowing generating and evaluating a greater number and variation of design alternatives.
series	journal
last changed	2019/05/24 09:55

_id	caadria2010_012
id	caadria2010_012
authors	Gu, Ning; Vishal Singh and Kathryn Merrick
year	2010
title	A framework to integrate generative design techniques for enhancing design automation
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 127-136
doi	https://doi.org/10.52842/conf.caadria.2010.127
summary	This paper presents and demonstrates a computational framework that facilitates the integration of different generative design techniques to enhance design automation. The framework is based on the evaluation and comparison of four main generative design algorithms. Effectiveness of the framework is demonstrated through an example scenario. Compared to most existing generative design systems that are based on one of the techniques, which often bias the generative design process in a certain direction, new generative design systems by applying the proposed framework will provide the trigger at each stage as demonstrated in the example scenario for the designer to perceive the emergent designs from different viewpoints. This advantage will enhance design generation and automation by assisting the designer in making more informed decisions in understanding and selecting the suitable generative techniques for different design needs.
keywords	Generative design systems; shape grammars; L-systems; cellular automata; genetic algorithms
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2010_024
id	caadria2010_024
authors	Gu, Ning; Wyn M. Jones and Anthony Williams
year	2010
title	Utilising digital design and rapid prototyping tools in design education
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 249-258
doi	https://doi.org/10.52842/conf.caadria.2010.249
summary	This paper presents a formal framework for utilising different digital design and rapid prototyping technologies in design education. The framework has been applied in a studio created for a mixed cohort of tertiary students from architecture and industrial design. A comprehensive survey was conducted at the end of the course as a means for evaluation, and for student self-reflection. This paper reports the experiences in conducting the studio and the student perceptions of their design processes and outcomes whilst confronting these tools. The paper provides insight into the application of digital design and rapid prototyping tools in design education, supported by a qualitative analysis of the survey result.
keywords	Student perceptions; digital design; rapid prototyping
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2010_168
id	ecaade2010_168
authors	Halatsch, Jan; Caro, Thomas; Moser, Bruno; Schmitt, Gerhard
year	2010
title	A Grammar-based Procedural Design Guideline Visualization Diagram for the Development of SVA Masdar
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.833-840
doi	https://doi.org/10.52842/conf.ecaade.2010.833
wos	WOS:000340629400089
summary	Nowadays, a large set of involved planning parties are heavily demanded with the definition of holistic in kind requirement specifications for urban planning sites – so called future cities. However, the resulting amountof specifications for a specific building project poses a great challenge to designers and planners especially when it comes to include this information into their design proposals for a sustainable urban development. These design performance criteria are traditionally expressed in textual and numerical planning guidelines and which are making it difficult to establish a comprehensive and holistic view onto the domain itself. Therefore we present in this paper a design guide visualization method to overcome this situation for the evaluation of design specification and urban layouts in a qualitative and quantitative manner.
keywords	Sustainable urban patterns; Shape grammars; Design evaluation; Urban planning; Design guide translation
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2010_205
id	sigradi2010_205
authors	Miotto, Bruscato Underléa; García Alvarado Rodrigo
year	2010
title	Muro - pixel: exploración digital de un sistema constructivo de placas entrelazadas [Muro - pixel: digital exploration of a constructive system with interlocking plates]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 205-208
summary	This paper reports the initial development of a constructive system based on interlocked boards manufactured through digital fabrication. The system is based on the elaboration of grooves in regular pieces by a laser - cutter or CNC - machines to develop self - supported configurations. A parametric design system has been designed and several material models and full - scale prototypes have been built. Although the system requires evaluation of its structural features, production and maintenance, it offers novel building alternatives. This experience set up an innovative way of performing experimental research to develop new products and possible designs.
keywords	digital fabrication, constructive system, parametric design, flexible wall, assembly
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2010_038
id	caadria2010_038
authors	Moloney, Jules and Bharat Dave
year	2010
title	Mixed reality at the sketch design stage
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 401-408
doi	https://doi.org/10.52842/conf.caadria.2010.401
summary	We discuss the use of multiple design representations to enhance decision making at the early stages of design. Our particular interest is in the way in which context can be extended by two interrelated approaches: (1) the incorporation of the temporal; and (2) through the concurrent evaluation of qualitative representations and quantitative information. Outcomes from a practice survey are used to formulate approaches to the use of mixed reality (MR) technology that reflect design-specific modes of working. We propose two approaches – studio MR and site MR – reflecting the distinction between the act of design and the process of a design review. The implementation of a studio MR application and illustrative design project are presented.
keywords	Design representations; mixed reality
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2010_111
id	ecaade2010_111
authors	Morello, Eugenio; Carneiro, Cla_udio; Desthieux, Gilles
year	2010
title	The Use of Digital 3-D Information to Assess Urban Environmental Quality Indicators
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.499-506
doi	https://doi.org/10.52842/conf.ecaade.2010.499
wos	WOS:000340629400054
summary	This paper anticipates the use of 3-D data for the environmental analysis of cities, aiming to provide useful tools for urban designers. The extraction of urban environmental quality (UEQ) indicators from 3-D information using innovative tools is presented. We will introduce our recent research about the implementation of computational tools for the analysis, evaluation and design of the urban space and compare results that can be obtained with different data sources. In particular, we are going to present the advantages of urban models generated from LiDAR data, by showing the case-study analysis of the measurement and quantification of urban vegetation indicators. Results show that the limitation to solar accessibility on roofs is not relevant for the case-study area. Moreover, a set of environmental and morphological indicators could inform urban designers for decision making processes about the distribution of vegetation inside the urban fabric.
keywords	3-D information; Urban environmental quality; 2.5-D digital urban surface model; LiDAR; Digital image processing
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2020_643
id	sigradi2020_643
authors	Naylor, John Osmond; Leconte, Nancy; Michel Vendryes, Franck Reginald
year	2020
title	Education to practice to ecology: A review and preliminary evaluation of a new architectural design curriculum using computational design tools and bamboo in Haiti
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 643-651
summary	There is an absence of lightweight, sustainable construction materials in contemporary Haitian construction, a fact highlighted in the disproportionate loss of life in the 2010 Port-au-Prince earthquake. Between 2014 and 2017 the authors delivered a series of architectural design workshops in Haiti to raise awareness and develop design skills for bamboo using computational design tools. This paper provides a review of these workshops and a preliminary evaluation from surveys conducted with the course participants. Results showed architectural education had changed perceptions of bamboo and showed potential positive ecological impact due to subsequent reforestation activities instigated by participants. Weaknesses were in the lack of subsequent use of parametric modelling software. Bamboo material knowledge and a new architectural design methodology have been most relevant to their professional or academic work.
keywords	Haiti, Full-culm bamboo, Architectural education, Sustainable development, Parametric design
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	caadria2013_195
id	caadria2013_195
authors	Park, Jihyun; Azizan Aziz, Kevin Li and Carl Covington
year	2013
title	Energy Performance Modeling of an Office Building and Its Evaluation – Post-Occupancy Evaluation and Energy Efficiency of the Building
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 209-218
doi	https://doi.org/10.52842/conf.caadria.2013.209
wos	WOS:000351496100021
summary	Energy performance modelling can provide insights into the efficiency and sustainability of commercial buildings, and also the achievement of certification standards such as USGBC LEED. However, the results from the modelling must be validated via a post-construction evaluation, which quantifies any discrepancies between the predicted energy usage and the actual energy consumed. In this study, an existing office building was examined to test how well the model predicts energy usage. The results from the model were compared with the actual usage of gas and electricity over two years (2010-2011). Our study showed a 123% higher gas usage,and a 36% lower electricity, compared with the simulation. This difference presents that occupant behaviour and building construction practices have significant impact on the energy usage of a building. For instance, the large discrepancy among gas usage is due to the office building’s thermal envelope, which identifies the spots at which heat leaks out of the building, thereby forcing the heating unit to work more. Additionally, the post occupancy evaluation study identified that indoor environmental conditions impact on energy consumption of the building.
keywords	Building performance evaluation, Energy modelling, Energy usage, User behaviour, Post occupancy evaluation
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ijac20108407
id	ijac20108407
authors	Pasold, Anke; Isak Worre Foged
year	2010
title	Function Follows Performance in Evolutionary Computational Processing-Vertical Evolution
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 525
summary	As the title ‘Function Follows Performance in Evolutionary Computational Processing’ suggests, this paper explores the potentials of employing multiple design and evaluation criteria within one processing model in order to account for a number of performative parameters desired within varied architectural projects. At the core lies the formulation of a methodology that is based upon the idea of human and computational selection in accordance with pre-defined performance criteria that can be adapted to different requirements by the mere change of parameter input in order to reach location specific design solutions.
series	journal
last changed	2019/05/24 09:55

For more results click below: