Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 451

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2010_279
id	ascaad2010_279
authors	Celani, G.; L. Medrano; J. Spinelli
year	2010
title	Unicamp 2030: A plan for increasing a university campus in a sustainable way and an example of integrated use of CAAD simulation and computational design strategies
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 279-286
summary	The state university of Campinas, Unicamp, is a public university in upstate São Paulo, Brazil, ranked the second best in the country. It was founded in 1966, and its main campus started to be built in 1967, in the suburbs of Campinas, nowadays a two-million people city. The area of the campus is almost 3 million square meters (300 hectares), with a total built area of 522.000 m2 and a population of 40 thousand people - 30 thousand students, 2 thousand faculty members and almost 8 thousand staff members. The campus’ gross population density is 133 people per hectare. Less than 6% of the total campus area is presently occupied. The design of Unicamp's campus is based on concepts that were typical of the modern movement, with reminiscences of corbusian urbanism, in which preference is given to cars and buildings are spread apart on the territory, with little concern to the circulation of pedestrians. The standard building type that has been built on campus since the 1970's is based on non-recyclable materials, and has a poor thermal performance. Unicamp is expected to double its number of students by the year 2030. The campus density is thus expected to grow from 600 people per hectare to almost 1,000 people per hectare. The need to construct new buildings is seen as an opportunity to correct certain characteristics of the campus that are now seen as mistakes, according to sustainability principles. This paper describes a set of proposals targeting the increase of the campus' density in a sustainable way. The plan also aims at increasing the quality of life on campus and diminishing its impact on the environment. The main targets are: - Reducing the average temperature by 2oC; - Reducing the average displacement time by 15 minutes; - Increasing the campus' density by 100%; - Reducing the CO2 emissions by 50%. // In order to achieve these goals, the following actions have been proposed: Developing a new standard building for the university, incorporating sustainability issues, such as the use of renewable and/or recyclable materials, the installation of rainwater storage tanks, the use of natural ventilation for cooling, sitting the buildings in such a way to decrease thermal gain, and other issues that are required for sustainable buildings' international certifications. To assess the performance of the new standard building, different simulation software were used, such as CFD for checking ventilation, light simulation software to assess energy consumption, and so on. 1. Filling up under-utilized urban areas in the campus with new buildings, to make better use of unused infrastructure and decrease the distance between buildings. 2. Proposing new bicycle paths in and outside campus, and proposing changes in the existing bicycle path to improve its safety. 3. Developing a landscape design plan that aims at creating shaded pedestrian and bicycle passageways.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:37

_id	ecaade2010_021
id	ecaade2010_021
authors	Gil, Jorge; Beirao, Jose; Montenegro, Nuno; Duarte, Jose
year	2010
title	Assessing Computational Tools for Urban Design: Towards a “city information model”
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.361-369
doi	https://doi.org/10.52842/conf.ecaade.2010.361
wos	WOS:000340629400038
summary	This paper presents an assessment of a selection software tools for urban design confronting their capabilities with the goals of the CityInduction research project. The goal of this paper is the assessment of existing platforms for computer aided urban design to select one as the basis for implementing the urban design model proposed in the CityInduction project. This model includes three sub-models that support the formulation of design programs from contextual information, the exploration of designs solutions through a grammarbased generative approach, and the validation of designs against the program through the use of evaluation tools. To each of these sub-models corresponds a module in the envisioned platform and so, existing platforms are assessed in terms of their ability to support the implementation of each module. The current goal is a proof-of-concept implementation, but the final goal is the development of a complete platform for supporting urban design.
keywords	Software review; Sustainable urban design; GIS; CAAD; BIM
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2010_065
id	ecaade2010_065
authors	Hardy, Steve(n); Lundberg, Jonas
year	2010
title	Environmental Catalysts for a Computational Urbanism
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.805-814
doi	https://doi.org/10.52842/conf.ecaade.2010.805
wos	WOS:000340629400086
summary	It is perhaps no longer relevant to discuss digital tools purely as means in themselves; the growth of abstract systems or computational patterns for their own sake simply strain justification in light of real-world concerns such as climate change and economic crises. While growing concerns over climate change have necessitated an increased interest in sustainable urbanism and design, sustainability has done little to yet alter the morphological and typological consequences of architectural space (Hardy, 2008). In a series of overlapping research projects and design studio briefs, students, research assistants and we worked with the iterative and variable processes of Rhinoscript, McNeel’s Grasshopper and Bentley’s Generative Components to explore the possibilities of changing environmental extremes (specifically flooding) as catalysts for providing new urban morphologies and spatial organizations. Working between the master plan and the individual housing unit, we investigated arrays of terrace homes in the London Thames Valley flood zones while simultaneously exploring the potential for computational generation and parametric optimization.
keywords	Computational urbanism; Formative strategies; Parametric design; Adaptive vs. mitagative; Environmental formations
series	eCAADe
email
last changed	2022/06/07 07:49

_id	caadria2011_067
id	caadria2011_067
authors	Neisch, Paulina
year	2011
title	Colour-code models: The concept of spatial network
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 707-716
doi	https://doi.org/10.52842/conf.caadria.2011.707
summary	The main goal for the architects or planners is to understand a perspective of the user. The foundation of the design process is to create buildings and environments, which will be both innovative and functional for all types of users, including adults and children. While planning the environments for children the particular aspects should be considered. The important questions are: What kind of contact does child have with the city, urban places and buildings? How does the child construct the picture of the city? What kind of urban or architectural spaces contributes to the relation that a child has with the environment? Most of the previous studies concentrating on creation of spaces for children have focused on the perspectives that have adults. According to CAADRIA 2010 paper, the objective of our study was to “learn about” (get to know the) children’s perception of everyday places. The main goal of the project was to define an appropriate tool for the design process. We identified three elements, which were considered to be the most important for child’s identification with environment: home, school, and the journey from home to school. For this purpose, children living in a residential community in Bangkok were surveyed. Contrariwise to the quantitative approach (Neisch, 2010), the concept of Colour – Code Models of space propose a qualitative development of this research – a graphic language which allow to understand the children’s spatial world, the novel way to analyze and present space, useful for educate architects and planners.
keywords	Spatial network; perception and representation of environment; drawing processing; data analyses; design for children
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2010_000
id	ecaade2010_000
authors	Schmitt, Gerhard; Hovestadt, Ludger; Van Gool, Luc; Bosché, Frédéric; Burkhard, Remo; Colemann, Suzanne; Halatsch, Jan; Hansmeyer, Michael; Konsorski-Lang, Silke; Kunze, Antje; Sehmi-Luck, Martina (eds.)
year	2010
title	FUTURE CITIES
source	28th eCAADe Conference Proceedings [ISBN 978-0-9541183-7-2], ETH Zurich (Switzerland) 15-18 September 2010, 904 p.
doi	https://doi.org/10.52842/conf.ecaade.2010
summary	Future Cities – the title of the 2010 eCAADe Conference describes one of the major challenges of the 21st century. The conference theme is a logical evolution from previous years in that it expands the focus of interest from the building to larger scales and higher complexity. The conference contributions describe methods and instruments that were developed in the last three decades and apply them to city and territorial planning. The eCAADe proceedings demonstrate that CAAD research and education of the past prepared the ground for the future and for the increased responsibility of the CAAD community. The population of cities has developed worldwide from a minority to the majority. Cities are the largest, most complex and most dynamic man-made systems. As vibrant centres of cultural life and of mega events, they are engines that drive local and global economies. However, their growth was in the fewest cases determined by sustainability goals. As a result, contemporary metropolitan territories are often environmentally, socially and economically unsustainable entities placing increasing pressure on the surrounding rural areas. No longer do traditional methods support the planning and managing of large cities – these methods have reached their limits. Parallel to the revolution in the design of buildings, we need a radical re-thinking of the planning, design, development and management process of cities and urban-rural systems. Compared to buildings, urban and rural systems involve a much higher number of stakeholders and decision makers. We need to study and simulate the effects and side effects of urban-rural planning or re-development much earlier in the process than normally done today. The goal seems clear: the transformation of existing and the planning of new sustainable urban-rural systems. As ordering principles we can build on experiences with building architecture. Complexity, dynamics, scale, and the urban metabolism evolve as promising research and education areas.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ascaad2010_135
id	ascaad2010_135
authors	Lostritto, Carl
year	2010
title	Computation Without Computers
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 135-144
summary	This work documents the implications of using physical media to teach digital design concepts, techniques, values and approaches. With the pedagogy and work of a seminar and studio across two Universities as test cases, this research seeks to prove that a parametric and algorithmic approach to architecture is most fruitfully understood as the connection between logic, mathematics and aesthetics. Students trace the indirect relationships between process and product so as to enable the application of these connections in a non-linear, exploratory and goal-flexible design process. The first phase of student work involves the creation of an image, constructed with ink or graphite on paper, that embodies a parametric aesthetic. Students are tasked articulating and performing operations, such as dividing a curve, packing shapes, and conditional transformations. Subsequently, students fabricate a surface-conscious model with modules that have the capacity to vary based on their grid parameter, using historically rooted techniques such as weaving, perforating, layering and tessellation. Digital fabrication and parametric modeling is then introduced, not as a means to a predefined end, but as another medium, capable of participating with manual techniques. As an example, a fabricated paper-based installation is generated with parametrically generating a cut-sheet, partially blind to its assembled manifestation. The hypothesis of this research is tested in more comprehensive projects that follow as environmental forces are resolved through dynamic and ambiguous visual and spatial conditions.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2010_043
id	caadria2010_043
authors	Barker, Tom and M. Hank Haeusler
year	2010
title	Urban digital media: facilitating the intersection between science, the arts and culture in the arena of technology and building
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2010.457
summary	The research presented in this paper investigates ways of providing better design applications for technologies in the field of Urban Digital Media (UDM). The work takes an emergent approach, evolving a design strategy through the early engagement of stakeholders. The paper discusses research in a design-led creative intersection between media technology, culture and the arts in the built environment. The case study discusses opportunities for the enhancement of a university campus experience, learning culture and community, through the provision of an integrated digital presence within campus architecture and urban spaces. It considers types of information architecture (Manovich, 2001) and designs for use in urban settings to create communication-rich, advanced and interactive designed spaces (Haeusler, 2009). The presented research investigates how to create a strategy for display technologies and networked communications to transform and augment the constructed reality of the built environment, allowing new formats of media activity.
keywords	Urban design; outdoor digital media; information architecture; multidisciplinary design; augmented reality; media facades
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
doi	https://doi.org/10.52842/conf.caadria.2010.327
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2010_034
id	caadria2010_034
authors	Chung, Daniel Hii Jun and Malone-Lee Lai Choo
year	2010
title	Computational fluid dynamics for efficient urban design
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 357-366
doi	https://doi.org/10.52842/conf.caadria.2010.357
summary	Computational fluid dynamics (CFD) is a method of solving and analysing problems that involved fluid flows. In the field of architecture, urban design and urban planning, CFD is useful for the analysis of ventilation and airflow in the built environment, especially in very dense cities. This paper will look into the possibility of making CFD more accessible to the general design and planning field. A simulation is done on a urban design proposal to quickly see how air flow behaves around it. From there, it looks into the future where technology will make CFD simulation more easily adopted and the possibilities of integrating the ventilation analysis with other environmental analysis results into the urban design arena.
keywords	Computational fluid dynamics; sustainability; high density; urban design; airflow
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2010_233
id	ecaade2010_233
authors	Guerbuez, Esra; Cagdas, Guelen; Alacam, Sema
year	2010
title	A Generative Design Model for Gaziantep’s Traditional Pattern
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.841-849
doi	https://doi.org/10.52842/conf.ecaade.2010.841
wos	WOS:000340629400090
summary	This paper describes a research to develop new urban designalternatives for Gaziantep by using fractal based approaches. The aim of the research is not only generating new form alternatives but also considering the continuity of traditional architectural and urban pattern which faces deterioration. Within this study, it is intended to test the applicability of the fractal based generative approaches and explore the potential advantages. The method called CADaFED (Ediz, 2003) is updated to be used in one of the 3d modeling programs, 3DsMax scripting and it is used as an experimental tool in two-day student workshop. The working field is limited as Bey Neighbourhood in Gaziantep for its well-preserved architectural characteristics. In this paper, the outcomes of the student workshop will be evaluated and discussed in the sense of affirmative effects of fractal based design approaches.
keywords	Generative design; Fractal based design; Computational architectural design; Traditional pattern
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ascaad2010_249
id	ascaad2010_249
authors	Hawker, Ronald; Dina Elkady and Thomas Tucker.
year	2010
title	Not Just Another Pretty Face
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 249-260
summary	Digital Heritage has gained popularity recently as means of dynamically representing and reconstructing historic buildings and cityscapes. Simultaneously this new medium of visualization affords another approach to examine human-virtual environment interaction and offers possibilities of exploiting virtual environments as educational tools. At Zayed University, a federal university primarily for women citizens of the United Arab Emirates, we have integrated student-faculty research and documented and reconstructed a number of historical buildings within the curriculum of the Department of Art and Design. We have further collaborated with the animation program at Winston Salem State University in North Carolina, utilizing the motion capture laboratory at the Center of Design Innovation to literally breathe life into these reconstructions. The primary idea is to contribute to the ongoing documentation of the country’s heritage through creating “responsive virtual heritage environments” where the spectator is actively engaged in exploring the digital space and gain certain degrees of control over the course and scheme of the dynamic experience. The process begins by introducing students to utilize the diverse capabilities of CAD and three dimensional computer applications and intertwine the technical skills they acquire to construct virtual computer models of indigenous built environments. The workflow between the different applications is crucial to stimulate students’ problem solving abilities and tame the application tools, specifically when constructing complex objects and structural details. In addition the spatial and temporal specificity different computer applications afford has proven useful in highlighting and analyzing the buildings’ function within the extreme climate of the country and their role in the political-economy, particularly in visualizing the ephemeral qualities of the architecture as they relate to passive cooling and the inter-relationships between built and natural environments. Light and time settings clarify shadow casting and explain the placement and orientation of buildings. Particle simulations demonstrate the harnessing of wind and rain both urban and rural settings. The quantitative data accumulated and charted through CAD and VR programs and geo-browsers can be integrated with qualitative data to create a more holistic analytical framework for understanding the complex nature of past settlement patterns. In addition, the dynamic nature of this integration creates a powerful educational tool. This paper reviews this ongoing research project with examples of reconstructions completed across the country, demonstrating analytical and educational possibilities through the integration of CAD programs with a range of other statistical, geographic, and visualization software.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	ascaad2010_127
id	ascaad2010_127
authors	Hubers, Hans
year	2010
title	Collaborative Parametric BIM
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 127-134
summary	The paper will be focussing on a number of digital design tools used in [our groups credentials]. A new laboratory called […] is developed with Virtual Reality for collaborative architectural design. A brief description of the systems and how they are used to support a design team is given. Synchronic and a-synchronic, local and inter-local communication is made possible. Methods for introducing sustainability in the digital design process and user participation over the Internet will be discussed. The results of the author’s PhD research “Collaborative architectural design in virtual reality” are used to develop a new approach in which team members use their own specific software. Swarm design applications developed in Virtools are used at the start of a project. The objects in the swarm can be urban and architectural functional volumes. Examples of the first are houses, offices, factories, roads and water ways. Examples of the second are working, dining, shopping and waiting spaces. Relations between the functional volumes with or without constraints make the functional volumes swarm to find equilibrium. Everything is dynamic, meaning that relations and functional volumes can change any time. Alternatives can be developed using different values for these parameters and by top-down intervention. When the final global layout has been chosen, using a criteria matrix with sustainability criteria to be judged by all participants, including the future users, a next phase is started amongst professionals using parametric design software. A study into different types of parametric design software makes clear why object parametric software can be used for IFC based BIM, while the more interesting process parametric software can not. To make this clear a pragmatic description of the IFC format is given with a simple example of such a file. Future research will be proposed in which applications of different disciplines are connected through the application programming interfaces, while integrating as much as possible the building information and knowledge in the IFC format.
series	ASCAAD
type	normal paper
email
last changed	2011/03/01 07:48

_id	ecaade2010_096
id	ecaade2010_096
authors	Juvancic, Matevz; Verovsek, Spela; Jutraz, Anja; Zupancic, Tadeja
year	2010
title	Developing Shared Urban Visions Through Participation Supported by Digital Tools
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.667-676
doi	https://doi.org/10.52842/conf.ecaade.2010.667
wos	WOS:000340629400072
summary	The authors base their efforts on the assumption that future cities will only be called ‘advanced’ and ‘sustainable’ if they evolve as a shared vision between the city users / dwellers (general public) and urban designers, planners, architects, engineers (experts). For visions to be shared and planning processes to be inclusive the involvement of all (urban) actors is paramount. With the increasing urban complexity and the interrelation of phenomena there is also an increasing demand for updated, advanced and re-thought digital tools that could help in forming and enabling such common urban visions. The paper outlines the agenda and connects our on-going research efforts with the fields deemed most crucial for inclusive-for-all, successful participation that can lead to shared visions of future cities. Standing out in interchangeable order and never-ending cyclic process are: (1) education, (2) communication and (3) collaboration.
keywords	Urban design; Education; Visual communication; Collaboration; Digital tools
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2010_032
id	caadria2010_032
authors	Karakiewicz, Justyna and Thomas Kvan
year	2010
title	Diagrams as parametric systems in urban design: parametric systems applied to conceptual design
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 337-346
doi	https://doi.org/10.52842/conf.caadria.2010.337
summary	The paper describes how parametric systems have been used to help students bridge from conceptual design to descriptive results. Specifically, it describes projects set in two cities, Hong Kong and Melbourne, to address substantive urban design issues and illustrate that the approach is not scale or culturally bounded. The project undertaken in Hong Kong establishes interdependency models for dense urban structure and examined urban systems that contribute positively to their contextual setting. Parametric models were used to develop diagrams of site potential through models of air movement, light and sun exposure, in particular addressing air quality in one of the most polluted places in Hong Kong. The Melbourne case studies examine urban systems as self-organising systems. In these, the case studies identify parameters that determine two patterns: material pattern of the city and cognitive pattern of the city. The paper illustrates the use of a parametric system as a diagramming tool to explore urban propositions from an urban system.
keywords	Urbanism; systems thinking; parametric; diagrams
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2010_167
id	ecaade2010_167
authors	Kunze, Antje; Schmitt, Gerhard
year	2010
title	A Conceptual Framework for the Formulation of Stakeholder Requirements
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.697-705
doi	https://doi.org/10.52842/conf.ecaade.2010.697
wos	WOS:000340629400075
summary	We need to face challenging needs for the planning of sustainable future cities. New methods in urban simulation enhance significantly the early urban design phase. However, these promising methods will only be sustainable if they consider stakeholder participation from the very beginning. Therefore we propose a conceptual framework for the formulation of stakeholder requirements, which enables the iterative modification of an urban model inside participatory workshops. A special emphasis concentrates on environmental, social and economical factors. The requirements posed by the stakeholders are instantly transferred into urban design patterns. Each single pattern stands for a solution for a specific problem that is integrated and visualized in a procedural model. Our goal is to create a participatory process that takes advantages by the use of comprehensive urban design patterns. The results are integrated within an interactive procedural model that communicate the most important guidelines for the planning of sustainable future cities.
keywords	Decision-making process; Stakeholder participation; Shape grammars; Urban patterns; Urban planning
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2010_090
id	ecaade2010_090
authors	Ladouce, Nicolas; Hee, Limin; Janssen, Patrick T.
year	2010
title	Urban Space Planning for Sustainable High Density Environment
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.777-785
doi	https://doi.org/10.52842/conf.ecaade.2010.777
wos	WOS:000340629400083
summary	In this paper we investigate the possibilities of new typologies of urban public space for high density environments. The premise for the project would be that with new high-density typologies, it would be necessary to consider a difference in the nature of urban public spaces rather than a difference in degree from the status quo. From observations of urban patterns that drive collective, hybrid spaces around Asia, relationships between urban attributes are drawn. For this paper we shall focus on the particular case of Linked Hybrid, Beijing, China, as an elevated urban public space. A literature review focuses on reviewing key theories to construct and adopt a rating system to develop an empirical framework to evaluate the case studies and extract the key attributes. These rated attributes are then abstracted in a real-time model that enables user manipulation. The purpose is to create a tool to better observe the effects and evolution of planning decisions for future urban spaces in high density contexts. The preliminary results are consistent with the idea that selected spatial parameters of a space may be embedded into a “barcode” and referenced as a type. The combination of different types, hence their parameters may be used for effective replication of their characteristics to improve the decision-making process for urban designers. The research is not intended to reproduce the successful urban public spaces but rather result in a catalogue of typologies which can be referred to during the initial stages of planning to provide an indication of spatial qualities.
keywords	High density environments; Collective urban space; Hybrid typologies; Parametric urbanism
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2010_396
id	sigradi2010_396
authors	Leder, Solange Maria; Ruttkay Pereira Fernando Oscar; Claro Anderson
year	2010
title	Acessibilidade à luz natural no meio urbano [Accessibility to natural light in urban environments]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 396-398
summary	This study covers daylighting performance analysis of inner spaces in two different urban occupation configurations through computational simulation. The scenarios are based on an urban patch of Florianópolis city, with an area of 38,900 square meters. The scenarios were built by CityZoom computer code. The daylighting simulation analyses were performed by Apolux code. The daylighting availability in urban scenario was analyzed through the Preferable Sky Window parameter and obstruction mask. According to this work methodology, guidelines can be developed restricting building height and spacing in order to provide minimum standards of daylight availability.
keywords	daylight; daylighting; urban sustainability
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	acadia11_132
id	acadia11_132
authors	MacDowell, Parke; Tomova, Diana
year	2011
title	Robotic Rod-bending: Digital Drawing in Physical Space
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 132-137
doi	https://doi.org/10.52842/conf.acadia.2011.132
summary	This paper details preliminary project-based design research that emphasizes the development of tools and processes in tandem with the development of ideas and forms. Amid increasingly mechanized fabrication processes, this project injects the human as code-writer and tool-builder, asserting authorship within the modes of production themselves. The initial output from this foray, wavePavilion is an architectural installation generated by computer algorithms and built using custom digital fabrication technology. Completed in June 2010, the project is located on the grounds of the University of Michigan Taubman College of Architecture and Urban Planning. wavePavilion has a footprint of 20x30 feet and stands 14 feet tall, containing over a kilometer of 1/4-inch diameter steel rod.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	caadria2010_006
id	caadria2010_006
authors	Martens, Bob and Herbert Peter
year	2010
title	Displacing the frontiers of reconstructed cultural heritage: representation of the non-existing within an urban context
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 63-72
doi	https://doi.org/10.52842/conf.caadria.2010.063
summary	Reconstruction work on more than twenty synagogues in Vienna has been ongoing for more than a decade. The fact that these sacred buildings no longer exist is a pivotal aspect in this undertaking. Research revealed archived material, however, which served as reliable basis for the reconstruction work. The paper focuses on the possibilities and limits of this exploration and discusses the long-term options for handling 3D models and the dissemination of results to a large audience. The appropriate illustration of spatial contexts is another aspect that has been explored. The publication of results in the form of a city guide is in line with the objective of conveying the reconstruction results to a large audience.
keywords	Virtual reconstruction; 3D modelling; visual representation; urban context
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:59

For more results click below: