Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 563

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p049
id	cf2011_p049
authors	Hii Jun Chung, Daniel; Chye Kiang Heng, Lai Choo Malone Lee, Ji Zhang
year	2011
title	Analyzing the Ventilation Performance of Tropical High Density Residential Precincts using Computational Fluid Dynamics
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 351-366.
summary	Major cities in the world are getting bigger as they continue to grow to cater for more population increase. These cities normally forced the urban planning to go high density. In the tropical context, high density cities like Singapore and Hong Kong do not have the luxury of space to go low rise and compact. These cities have to build to the floor area ratio of 4 and above to cater for the population. Their only solution is to go up, as high as possible, to the extent that the natural wind flow pattern will be altered, which brings environmental impact to the people. This is generally not good since wind flow helps to maintain the thermal comfort of the people as heat and pollutants are being channeled out of the city to avoid Urban Heat Island effect. In the tropical context, wind flow is crucial to maintain people‚Äôs comfort as the temperature is generally very high from the exposure of the sun for the entire year. Studies have shown that wind flow plays the most significant part in maintaining human comfort despite exposing to direct sunlight in the tropics. Therefore, wind flow analysis is extremely crucial to make the design sustainable and energy efficient, as people will not have to depend on mechanical ventilation to compensate for the lack of wind flow. Computational Fluid Dynamics (CFD) has always been used in the field of architecture, urban design and urban planning to understand the patterns of wind flow through the built environment apart from wind tunnel tests. The availability of more powerful hardware for the mainstream computer users as well as the lowering costs of these computers made CFD more possible to be adopted in the design world today. This also means using CFD in the design process, especially to analyze the impact of the design to the current site conditions and annual wind patterns will help the new design to be more responsive to the site. The interest of this paper is to analyze the high density typologies to see how well they respond to the local wind flow pattern. A typology is considered acceptable when the wind flow going through the site is still maintaining acceptable wind speed. This means it does not block off the wind and create stagnant spaces. Different designs generate different typologies which will respond differently to the wind pattern. The study aims at comparing the local high density typologies in terms of their response to the wind. Changes to a typology can be explored too to see if the performance will be different. For a typology which is considered a total failure in terms of response to wind, it may improve its performance if the orientation is altered. The CFD software can also parametrically respond to the changes of the typologies‚Äô dimensions. This is helpful to see how much more a typology can still be performing well before failure by increasing the floor area index. The easiest way to do this is to pump up the building height. In conclusion, designing in response to wind is extremely important as it is more sustainable and responsive to Urban Heat Island effect. A design which responds well to the wind patterns will help save cost of cooling load and fan expenditure. The people will also be more willing to use the outdoor spaces which will as a whole generate more vibrant city spaces. As a result, a high density city with huge population count can still enjoy good thermal comfort if the general urban planning and design respond well to wind.
keywords	computational fluid dynamics, sustainability, high density, urban design, airflow, ventilation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	b339
id	b339
authors	Bunster, Victor
year	2011
title	Tropism-oriented generative design: Analogical models for heterogeneous goal integration
source	Master of Philosophy (MPhil) Thesis. Faculty of Architecture, Building and Planning, The University of Melbourne.
summary	Architecture often requires integration between heterogeneous objectives. Both empirical requirements and speculative aspirations inform design in ways that resist ready formalization under computerizable logic. This thesis explores the possibilities of tropism-analogy as strategy for tackling some of these diverse objectives in a generative system. The feasibility of addressing heterogeneous goals with a computerizable design system is established by reviewing the role of rule-based strategies in vernacular tradition and the possibilities of analogies in recent generative methods. Then, the concept of tropism is analysed in depth, starting from its origins to its manifestation in a broad range of disciplines. This analysis leads to the definition of tropism as a ‘process of turn’ that enables purposeful connections between a system and its environment, an invariant property that may result in different levels of adaptation. These generalized conditions are used as conceptual foundation to explore analogical connections between divergent dimensions of architectural problems, and to define a feedback-enabled generative system that uses tropism-inspired rules in tackling contrasting design objectives. This system is implemented as a proof-of-concept for the Chilean social housing program, where is used to generate façade prototypes that respond simultaneously to thermal comfort and formal expression criteria. The outcomes of this thesis suggest that tropism-analogy can be used in tackling heterogeneous façade objectives and, therefore, to define novel design methods to explore goal-integration in computer-based generative architecture systems.
keywords	generative architecture, design computation, tropism analogy, goal integration, social housing
series	thesis:MSc
type	normal paper
email
more	http://dtl.unimelb.edu.au/R/98KH7M6SLEUI1J2GUA82K5A1AQSR7NK9HMI4GPCRJGFAEYDGHF-01472?func=dbin-jump-full&object_id=277253&local_base=GEN01&pds_handle=GUEST
last changed	2012/07/06 17:57

_id	cf2011_p020
id	cf2011_p020
authors	Kabre, Chitrarekha
year	2011
title	A Computer Aided Design Model for Climate Responsive Dwelling Roof
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 315-332.
summary	Computer-Aided Design models have generated new possibilities in the sustainable design of buildings. Computer models assisting different aspects of architectural design have been developed and used for several decades. A review of contributions of computing to architectural design is given by Gero. Most of the conventional simulation computer programs do not actively support design development and optimization, specially at the formative design stages. It is well established that most decisions that affect comfort and building energy use occur during the formative design stages of the project. Furthermore, the efforts required to implement those decisions at the beginning of the design process are small compared to the effort that would be necessary later on in the design process. Therefore, if sustainable design issues are going to receive an appropriate level of consideration at the beginning of the design process, they must be presented in a way which is useful to the architect and fits with other things the architect is considering at that time. Design is seen as a problem-solving process of searching through a space of design solutions. The process of finding a solution to a design problem involves, identifying one or more objectives, making design decisions based on the objectives, predicting and evaluating the performance to find the acceptable decisions. Each of these activities can be performed inside or outside the formal model. In designing a roof, an architect or building designer has to make many decisions on the materials. The arrangement of these materials determines the aesthetic appearance of the roof and the house. Other considerations that affect the choice of roofing materials are thermal performance, rain, fire protection, cost, availability and maintenance. Recyclability of materials, hazardous materials, life-cycle expectancy, solutions, and design options as they relate to the environment also need to be considered. Consequently, the design of roof has become quite a complex and multifaceted problem. The principal need is for a direct design aid which can generate feasible solutions and tradeoff performance in conflicting requirements and prescribe the optimum solution. This paper presents a conceptual Computer Aided Design model for dwelling roof. It is based on generation and optimization paradigms of Computer Aided Design; which is diametrically opposite to conventional simulation. The design of roof (design goal) can be defined in terms of design objective as "control radiant and conduction heat." This objective must be satisfied to achieve the design goal. The performance variables, such as roof ceiling surface temperature or new thermal performance index (TPI*) must acquire values within certain ranges which will satisfy the objective. Given the required inputs, this computer model automatically generates prescriptive quantitative information to design roof to achieve optimum thermal comfort in warm humid tropics. The model first generates feasible solutions based on the decision rules; next it evaluates the thermal performance of the roof taking into account design variables related to the building‚Äôs roof and finally it applies numerical optimization techniques to automatically determine the optimum design variables, which achieve the best thermal performance. The rational and methodology used to develop the proposed model is outlined and the implementation of model is described with examples for climatic and technological contexts of India and Australia.
keywords	Computer aided design, sustainable design, generation, optimization, dwelling roof, thermal performance
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p019
id	cf2011_p019
authors	Haeusler, Matthias Hank; Beilharz Kirsty
year	2011
title	Architecture = Computer‚ from Computational to Computing Environments
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 217-232.
summary	Drawing on architecture, urban digital media, engineering, IT and interaction design, the research presented in this paper outlines a possible shift from architecture designed through computation (any type of process, algorithm or measurement done in a computational matter) towards architecture capable of computing (developing, using and improving computer technology, computer hardware and software as a space-defining element). The research is driven by recent developments in four fields, as follows: (a) Architecture in its recent development has shifted from a planar box, as was the ideal in the modernist movement, towards complex and non-standard forms. (b) The design concepts of non-standard surfaces have been adopted into media facades and media architecture by liberating the pixel from its planar position on a screen [1]. (c) Advancements in pervasive computing applications are now able both to receive information from the environment in which they are used and to detect other devices that enter this environment [2]. (d) Developments in advanced autonomous systems such as Human Computer Interaction (HCI) or Human Robot Interaction (HRI), have produced intelligent systems capable of observing human cues and using these cues as the basis for intelligent decision-making [3]. Media fa_ßade developments work in the direction of the above-mentioned four fields, but often come with limitations in architectural integration; they need additional components to interact with their environment and their interactions are both often limited to visual interactions and require the user to act first. The researched system, Polymedia Pixel [4] discussed in this paper, can overcome these limitations and fulfil the need for a space-defining material capable of computing, thus enabling a shift from architecture designed by computation towards architecture capable of active computing. The Polymedia Pixel architecture merges digital technology with ubiquitous computing. This allows the built environment and its relation with digital technology to develop from (a) architecture being represented by computer to (b) computation being used to develop architecture and then further to where (c) architecture and the space-defining objects have computing attributes. Hence the study presented aims to consider and answer this key question: ‚ÄòWhen building components with computing capacity can define space and function as a computer at the same time, what are the constraints for the building components and what are the possible advantages for the built environment?‚Äô The conceptual framework, design and methods used in this research combine three fields: (a) hardware (architecture and design, electronic engineering) (b) software (content design and IT) and (c) interaction design (HCI and HRI). Architecture and urban design determinates the field of application. Media architecture and computer science provide the technological foundation, while the field of interaction design defines the methodology to link space and computing [5]. The conceptual starting point is to rethink the application of computers in architecture and, if architecture is capable of computing, what kind of methodology and structure would find an answer to the above core research question, and what are the implications of the question itself? The case study discusses opportunities for applying the Polymedia Pixel as an architectural component by testing it on: (a) constraint testing ‚Äì applying computational design methodologies to design space (b) singular testing - discussing the advantages for an individual building, and (c) plural testing ‚Äì investigating the potential for an urban context. The research aims to contribute to the field of knowledge through presenting first steps of a System < - > System mode where buildings can possibly watch and monitor each other, additional to the four primary interactive modes of operation. This investigation, its proposed hypothesis, methodology, implications, significance and evaluation are presented in the paper.
keywords	media architecture, computational environments, ubiquitous computing, interaction design, computer science
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cdrf2023_235
id	cdrf2023_235
authors	Mohsen Kafaei, Jane Burry, Mehrnoush Latifi, Joseph Ciorciari
year	2023
title	Designing a Systematic Experiment to Investigate the Effect of Ambient Smell on Human Emotions in the Indoor Space; Introducing a Mixed-Method Approach
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_20
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	Studies have indicated that built environments affect all aspects of human life such as emotion, perception, behavior, health, and well-being (Cooper et al. 2011). Built environments are formed from the combination and juxtaposition of visible and invisible environmental variables. In recent years, common techniques such as virtual reality, augmented reality, digital twins, and artificial intelligence have enabled researchers in the field of architecture and urban design to simulate environmental conditions to investigate the impacts of environmental variables on humans. However, the studies conducted in this field of human comfort are mostly focused on the impact of environmental variables such as form, temperature, humidity, and sound, and in fewer studies, up-to-date methods and technologies have been used to simulate and investigate the impact of smell on humans. Most of the studies that have investigated the effect of ambient smell on humans, carried out in the discipline of architecture and urban design, have used traditional tools and methods (questionnaire, interview, observation) rather than advanced technology and tools drawing on neuroscientific knowledge and technique to measure the effectiveness of the ambient smell on human. They have used unmasked scents or real-world environments rather than being able to simulate environmental conditions. This article highlights the significance and necessity of employing simulation methods to investigate the impact of environmental smells on humans. Additionally, it presents the methodology of an experiment for studying the effect of indoor environment smells (with a case study of an office environment in the initial phases) on human emotions, utilizing a mixed-method approach. Analysis of some parts of the data from this experiment showed that exposure to the fragrance of the jasmine flower pleasant (flower) and the odor of the rotten orange peel (unpleasant) can cause changes in the electroencephalography (EEG) power across different bands among participants.
series	cdrf
email
last changed	2024/05/29 14:04

_id	caadria2013_195
id	caadria2013_195
authors	Park, Jihyun; Azizan Aziz, Kevin Li and Carl Covington
year	2013
title	Energy Performance Modeling of an Office Building and Its Evaluation – Post-Occupancy Evaluation and Energy Efficiency of the Building
doi	https://doi.org/10.52842/conf.caadria.2013.209
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 209-218
summary	Energy performance modelling can provide insights into the efficiency and sustainability of commercial buildings, and also the achievement of certification standards such as USGBC LEED. However, the results from the modelling must be validated via a post-construction evaluation, which quantifies any discrepancies between the predicted energy usage and the actual energy consumed. In this study, an existing office building was examined to test how well the model predicts energy usage. The results from the model were compared with the actual usage of gas and electricity over two years (2010-2011). Our study showed a 123% higher gas usage,and a 36% lower electricity, compared with the simulation. This difference presents that occupant behaviour and building construction practices have significant impact on the energy usage of a building. For instance, the large discrepancy among gas usage is due to the office building’s thermal envelope, which identifies the spots at which heat leaks out of the building, thereby forcing the heating unit to work more. Additionally, the post occupancy evaluation study identified that indoor environmental conditions impact on energy consumption of the building.
wos	WOS:000351496100021
keywords	Building performance evaluation, Energy modelling, Energy usage, User behaviour, Post occupancy evaluation
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	acadia11_326
id	acadia11_326
authors	Velikov, Kathy; Thün, Geoffrey; O’Malley, Mary; Ripley, Colin
year	2011
title	Toward Responsive Atmospheres: Prototype Exploration through Material and Computational Systems
doi	https://doi.org/10.52842/conf.acadia.2011.326
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 326-333
summary	The Stratus Project is an ongoing body of design research investigating the potential for kinetic, sensing and environment-responsive interior envelope systems. The research emerges from a consideration of our attunement to the soft systems of architecture – light, thermal gradients, air quality and noise – paired with a desire to develop and prototype envelopes that not only perform to affect these atmospheres, but also to promote continual information and material exchange, and eventually dialogue, between occupant and atmosphere. Stratus v1.0 included the construction of a modest prototype using simple open source technologies, aimed to explore the formal, operational and technological possibilities, as well as potential operability and control conflicts, as part of the first phase of thinking around these questions. It deploys a distributed approach to structural, mechanical and communications systems design and delivery, where localized response is prioritized. The project works to reclaim the environmentally performative elements of architecture – in this case, specifically, interior mechanical delivery and interface systems – to within the purview of the discipline, as territories of material, formal, technological and experiential innovation and exploration. This paper will describe both the development of the current prototype as well as future research and investigation trajectories. The Stratus Project begins by situating itself at the crossroads of the disciplinary territories of architecture, technology, environmental control and cybernetics. Through the use of computational technologies and in collaboration with researchers in the fields of computer science, mechanical engineering and materials science, this project aims to advance the development of responsive environmental design and performative building skins.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	acadia11_56
id	acadia11_56
authors	Hoberman, Chuck; Schwitter, Craig
year	2011
title	Adaptive Structures: Building for performance and sustainability
doi	https://doi.org/10.52842/conf.acadia.2011.056
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 56-59
summary	For most architects and engineers, the idea of optimizing a building’s design in relation to its location is so ingrained as to be a reflex. Still, most building professionals have a difficult time making the conceptual and practical leap to the notion of performance-based or “adaptive” buildings. We call these adaptive buildings because they can adapt their shape and function in realtime to environmental changes. This field remains far less developed than other areas of practice, but the logic of adaptive performance — which is time-based, responsive, and dynamic — is compelling. Buildings that continuously attune their configurations in accordance with changing environmental conditions use less energy, offer more occupant comfort, and feature better overall space efficiency than static buildings.
series	ACADIA
type	keynote paper
email
last changed	2022/06/07 07:50

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20109103
id	ijac20109103
authors	Jun Chung, Daniel Hii; Malone-Lee Lai Choo
year	2011
title	Computational Fluid Dynamics for Urban Design: The Prospects for Greater Integration
source	International Journal of Architectural Computing vol. 9 - no. 1, 33-54
summary	Computational Fluid Dynamics (CFD) has always been used in the field of architecture, urban design and urban planning to understand the patterns of wind flow through the built environment. Its analysis is important to evaluate whether the natural ventilation through a site is adequate to mitigate heat and pollutant to achieve better human comfort in dense urban environments. However, given the complex operational requirements, the response to wind flow is not always done early enough to support planning and design. This paper seeks to illustrate how CFD analysis can aid planning and design of urban areas and investigates the workflow requirements, in the hope of making the CFD simulations more accessible to the practices and contribute to design decisions. It also looks at the present technological advancements and future prospects to assess the scenarios where emerging technologies can make CFD simulation more readily available with affordable and even mobile hardware installations.
series	journal
last changed	2019/05/24 09:55

_id	acadiaregional2011_008
id	acadiaregional2011_008
authors	Krietemeyer,Elizabeth A.; Anna H. Dyson
year	2011
title	Electropolymeric Technology for Dynamic Building Envelopes
doi	https://doi.org/10.52842/conf.acadia.2011.x.s0s
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
summary	Human health and energy problems associated with the lack of control of natural light in contemporary buildings have necessitated research into dynamic windows for energy efficient buildings. Existing dynamic glazing technologies have made limited progress towards greater energy performance for curtain wall systems because they are still unable to respond to dynamic solar conditions, fluctuating building demands, and a range of user preferences for visual comfort and individual control. Recent breakthroughs in the field of information display provide opportunities to transfer electropolymeric technology to building envelopes that can achieve geometric and spectral selectivity in concert with pattern variation within the façade. Integrating electroactive polymers within the surfaces of an insulated glazing unit (IGU) could dramatically improve the energy performance of windows while enabling user empowerment through the control of the visual quality of this micro-material assembly, in addition to allowing for the switchable patterning of information display. Using parametric modeling as a generative design and analysis tool, this paper examines the technical intricacies linking system variables with visual comfort, daylight quality, and pattern design of the proposed electropolymeric dynamic facade technology.
series	ACADIA
last changed	2022/06/07 07:49

_id	cf2011_p003
id	cf2011_p003
authors	Ng, Edward; Ren Chao
year	2011
title	Sustainable Planning with a Synergetic Collation of Thermal and Dynamic Characteristics of Urban Climate using Map Based Computational Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 367-382.
summary	Since 2006, half of the world’s population lives in cities. In the age of climate change, designing for quality environmental living conditions and sustainability is a topical concern. However, on the one hand, designers and city planners operate with their three dimensional city morphological data such as building shapes and volumes, forms and their spacings, and functional attributes and definition signatures. On the other hand, urban climatologists operate with their numbers and equations, quantities and signals, and normals and anomalies. Traditionally the two camps do not meet. It is a challenge to develop design tools that they can work together. Map based information system based on computational geographic information system (GIS) that is properly structured and represented offers a common language, so to speak, for the two professional groups to work together. Urban climatic map is a spatial and graphical tool with information embedded in defined layers that are collated so that planners and urban climatologists can dialogue over design issues. With various planning and meteorological data coded in defined grid resolutions onto the GIS map system, data can be synergized and collated for various understandings. This papers explains the formulation of Hong Kong’s GIS based Urban Climatic Map as an example of how the map works in practice. Using the map, zonal and district based planning decisions can be made by planners and urban climatologists that lead to new designs and policy changes.
keywords	sustainable development, urban planning, urban thermal, urban dynamics, computer tools
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_045
id	ecaade2011_045
authors	Noriega, Farid Mokhtar; Barba, Victor Garcia; Merino, Jose Antonio; Zancajo, Jose Julio; Pérez, Teresa Mostaza
year	2011
title	ArchiInspection Project: Integrated Non Destructive Testing, A Building Information Model Approach
doi	https://doi.org/10.52842/conf.ecaade.2011.383
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.383-392
summary	A non destructive testing process is becoming a technical need, thousands of buildings and huge urban areas will have to be adapted to restrictive energy-saving standards and sustainability criteria. Analysis and diagnostics are required on a massive scale. Building Information Modeling seems to be the adequate environment to assemble huge amounts of data. At this moment both hardware and software technologies are performing moderately well separately. The challenge is to connect them and in the long run automate data collection and conversion to a unified model that could be maintained during the programmed building life cycle. The aim of this research is to discuss the challenge of NDT hardware and BIM software systems integration and define the basic steps for the best practices to undertake it in a fast and accurate manner as well as to define the present and future connections to be developed. A 3 phase joint research project is proposed here and basic needs are analysed. Many lessons have been learned from field work, data translation and data incompatibilities with many shortcomings being detected.
wos	WOS:000335665500044
keywords	BIM; Architectural Non Destructive Testing; Architectural conservation databases; information interoperability
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p152
id	cf2011_p152
authors	Plume, Jim; Mitchell John
year	2011
title	An Urban Information Framework to support Planning, Decision-Making & Urban Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 653-668.
summary	This paper reports on a 2-year research project undertaken in collaboration with a state planning authority, a major city municipal council and a government-owned development organisation. The project has involved the design of an urban information model framework with the aim of supporting more informed urban planning by addressing the intersection where an individual building interfaces with its urban context. This adopted approach enables new techniques that better model the city and its processes in a transparent and accessible manner. The primary driver for this project was the challenge provided by the essential incompatibility between legacy GIS (geographic information system) datasets and BIM (building information model) representations of the built form. When dealing with urban scale information, GIS technologies use an overlay mapping metaphor linked to traditional relational database technologies to identify features or regions in the urban landscape and attach attribute data to those in order to permit analysis and informed assessment of the urban form. On the other hand, BIM technologies adopt an object-oriented approach to model the full three-dimensional characteristics of built forms in a way that captures both the geometric and physical attributes of the parts that make up a building, as well as the relationships between those parts and the spaces defined by the building fabric. The latter provides a far richer semantic structure to the data, while the former provides robust tools for a wide range of urban analyses. Both approaches are widely recognised as serving well the needs of their respective domains, but there is a widespread belief that we need to reconcile the two disparate approaches to modelling the real world. This project has sought to address that disjunction between modelling approaches. The UrbanIT project concentrated on two aspects of this issue: the development of a framework for managing information at the precinct and building level through the adoption of an object-oriented database technology that provides a platform for information management; and an exploration of ontology tools and how they can be adopted to facilitate semantic information queries across diverse data sources based on a common urban ontology. This paper is focussed on the first of those two agendas, examining the context of the work, the challenges addressed by the framework and the structure of our solution. A prototype implementation of the framework is illustrated through an urban precinct currently undergoing renewal and redevelopment, finishing with a discussion of future work that comes out of this project. Our approach to the implementation of the urban information model has been to propose extensions to ISO/PAS 16739, the international standard for modelling building information that is commonly known as IFC (Industry Foundation Classes). Our reason for adopting that approach is primarily our deep commitment to the adoption of open standards to facilitate the exchange of information across the built environment professions, but also because IFC is based on a robust object schema that can be used to construct a internet-accessible database able, theoretically, to handle the vast quantity of data needed to model urban-scale information. The database solution comes with well-established protocols for handling data security, integrity, versioning and transaction processing or querying. A central issue addressed through this work is concerned with level of detail. An urban information model permits a very precise and detailed representation of an urban precinct, while many planning analyses rely on simplified object representations. We will show that a key benefit of our approach is the ability to simultaneously maintain multiple representations of objects, making use of the concept of model view definitions to manage diverse analysis needs.
keywords	urban information modelling, geographic information systems, city models, interoperability, urban planning, open standards
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia23_v1_110
id	acadia23_v1_110
authors	Scelsa, Jonathan; Sheward, Gregory; Birkeland, Jennifer; Liu, Jemma; Lin, Yun Jou
year	2023
title	Centripetal Clay Printing : Six-Axis Prints for Habitat Column
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 110-115.
summary	Gottfried Semper, in his 1851 text The Four Elements of Architecture, famously classifies architecture into four elemental parts: the hearth, the roof, the enclosure, and the mound, describing the role of the last three to be the “defenders of the hearth’s flame against the three hostile elements of nature (Semper 2011).” Modernity has witnessed the role of enclosure evolve to that of a sealed envelope, or one which meticulously separates the ‘natural environment,’ from the internally regulated environment as part of modern comfort. The post-modern advent of the rain-screen has further separated the layer of exteriorized cultural expression from the structuring envelope, removing the ornamental aspect of Semper’s enclosure, from the enclosing layer. This habit of casting the natural processes out of our building envelopes has resulted in the rapid depletion of space for biodiversity within our cities. Joyce Hwang in her essay “Living Among Pests,” has suggested that the needed reconnection of biodiversity with our urban buildings will force a re-examination of “facade articulation to take on more responsibilities. Ornament will become performative” (Hwang 2013).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	cf2011_p124
id	cf2011_p124
authors	Verdonck, Evelien; Froyen Hubert
year	2011
title	Universal Design Patterns: Designing a Web-Based Tool with Architects
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 103-115.
summary	The implementation of Universal Design in design practice requires a number of tools that provide support to designers throughout the design process. In recent years, several studies have been carried out, determining methods to help designers select appropriate design support tools (DSTs), looking for desired data representation characteristics, or focusing on involving a wide range of users in the design process. This paper discusses how architects, as end-users of the DST, are involved in the development process of a new web-based tool based on the Universal Design Patterns concept. The Universal Design Pattern concept was developed based on Christopher Alexander‚Äôs Pattern Language, and looks at the possibility of using patterns to describe existing barriers in the built environment (conflicts), as well as design characteristics that may be implemented to make new designs more inclusive (resolutions). Through Universal Design Patterns, users can contribute new insights about the existing built environment, while architects can discuss the inclusive qualities of new design solutions or find useful design guidance. Involving the architects in developing the Universal Design Pattern concept into a web-based design tool is essential to establish a structure for the Universal Design Patterns that is compatible with the designers‚Äô way of thinking about design problems. Using the specific structure of Universal Design Patterns allows for the grouping of information into appropriately themed units on different levels of the design in a clear and uniform way. Building on the results of a survey involving 406 architects and a comparative study of existing DSTs for Universal Design, this paper first focuses on the results of a series of interviews that provided the basis for a first data-structure for the Universal Design Patterns tool. In addition to this, case-studies were carried out to ensure the new tool can easily be incorporated into the architects‚Äô design process. The results from both the interviews and the case-studies were combined in a preliminary model for the web-based tool. Finally, the methodology for testing this model with architects is discussed. In conclusion, some thoughts are given on the potential benefits of not only testing new DSTs with designers, but involving them actively from the early stages; or, in other words, the benefits of tools not only designed for architects, but with them.
keywords	Universal Design, Tools, Patterns
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_022
id	ecaade2011_022
authors	Achten, Henri
year	2011
title	Degrees of Interaction: Towards a Classification
doi	https://doi.org/10.52842/conf.ecaade.2011.565
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.565-572
summary	In architecture various approaches have been developed do deal with changing demands on the building. The most recent development is interactive architecture. In this paper we aim to outline what interactive architecture is. First we define the type of performance behavior that an interactive building or environment has. Following, we consider the relation between the system and the user. We derive four types of relations, characterized as “perfect butler,” “partner,” “environmental,” and “wizard.” Interactive systems are composed of sensors, controllers, actuators, and materials. Various degrees of interactivity can be achieved with such systems, ranging from passive, reactive, autonomous, to agent systems. Complete with earlier discussion of design methods this provides the range of aspects that should be considered when designing interactive architecture.
wos	WOS:000335665500065
keywords	Interactive architecture; Human-Computer interaction; design theory
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: