Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 542

Reformat results as: short short into frame detailed detailed into frame

_id	acadia11_82
id	acadia11_82
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
doi	https://doi.org/10.52842/conf.acadia.2011.082
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
summary	With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_053
id	ecaade2011_053
authors	Barros, Mário; Duarte, José P.; Chaparro, Bruno
year	2011
title	Digital Thonet: An automated system for the generation and analysis of custom-made chairs
doi	https://doi.org/10.52842/conf.ecaade.2011.521
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.521-529
summary	A system is presented to support the designer in creating custom versions of chairs within a predefined design language using Thonet chairs as a case study. The system consists of parametric models based on shape grammars linked to structural analysis to provide an integrated generative process for mass customization in the furniture industry.
wos	WOS:000335665500060
keywords	Thonet; furniture design; finite element method; parametric design; mass customization
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_108
id	ecaade2011_108
authors	Celani, Gabriela; Beirão, José N.; Duarte, José P.: Vaz, Carlos
year	2011
title	Optimizing the “characteristic structure”: Combining shape grammars and genetic algorithms to generate urban patterns
doi	https://doi.org/10.52842/conf.ecaade.2011.491
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.491-500
summary	The present paper is part of an undergoing research that aims at developing software that can generate urban plans, based on contemporary urban design concepts, in an optimized way. As a design method, the project proposes the use of the trilogy formulation/ generation/evaluation, which starts with an outline of the design requirements, proceeds with the definition of generative procedures that can result in these requirements, and follows with the evaluation of the generated designs. The paper describes the development of a computer program that implements some of Marshall’s evaluation methods, and further elaborates them to define generative criteria and to optimize the resulting designs with GA techniques. The program aims at generating what Marshall calls a “characteristic structure”, a type of urban fabric that is usually found in vernacular urban fabrics.
wos	WOS:000335665500057
keywords	Generative design; urban design; genetic algorithms; shape grammars
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_092
id	ecaade2011_092
authors	Hulin, Jaroslav; Pavlicek, Jiri; Kaftan, Martin
year	2011
title	Parametric bus stop shelters in rural areas: Automating custom design
doi	https://doi.org/10.52842/conf.ecaade.2011.485
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.485-490
summary	This paper describes the first stage of an applied research project that explores parametric design strategies in a context of rural bus stop shelters. The aim of the research is to propose a possible method for improving current state of public infrastructure in rural locations of the Czech Republic. The research project examines, in a practical way, how advanced design techniques and new technologies could help architects and designers participate in some areas of the building industry that have been out of reach of professional designers. Rural bus stop shelters in Czech Republic serve as an example of one particular ‘unreachable’ area. During the first stage of the research (described in this paper), we developed a parametric system of design and production of a bus stop shelter and we commissioned a fully functional prototype to be built. In the outlook of the research, participation of users in the design process is outlined.
wos	WOS:000335665500056
keywords	Parametric design; mass customization; participatory design; bus stop shelters
series	eCAADe
email
last changed	2022/05/01 23:21

_id	eaea2009_kardos_plachtinska
id	eaea2009_kardos_plachtinska
authors	Kardos, Peter; Petra Plachtinska
year	2011
title	Spatial Experience in Real & Virtual Environment as an Urban Design Tool
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 59-64
summary	The innovations of information technologies and the new possibilities of multimedia exploitation in the realm of architectural design and education are supporting the development of image communication methods on the basis of interactivity. The creative process of searching and decision-making in the urban design studio of our Faculty is supported by spatial modeling methods. The draft is sketched in modeling material on a working model. From the didactic point of view, relevant are mainly those phases, in which is possible, in the imaginative way, to support the searching and decision making process with the aim to test, compare and continuously evaluate the fulfillment of the hypothetic intentions of the solution responsibilities. The model becomes an interactive medium of cooperation between teacher and the working group of students. From the view of design crystallization, the dominant phases, in the creative process, are examining, verification, and simulation. The alternatives of material-compositional content and the spatial performance charts of modeled physical structure are verifying and the visual experience of the anticipated urban environment is simulated by the author, but also through the future client’s eyes. The alternation of the composition’s spatial configurations is generally appreciated by the static visual verification in the endoscopic horizon like the architectural spatial studies. The effective method of the progress generates a creative atmosphere for the generative thinking and design. The laboratory simulation of spatial experiences and their evaluation is performed following the perception psychology relations. The simulation of digestion of the new spatial reality intervenes the customer’s identification and guides to subjective approaches towards the quality and complexity of the formed environment. The simulation is performed in motion in order to be able to anticipate the dynamic continuity of subjective spatial imagination. The induced atmosphere will direct the evaluational attitudes of authors on comparison and selection of the successful alternatives. In our fee, we will present the demonstrations of selected static and dynamic notations of image sequences prepared in our laboratory. The presentations have been created in order to analyze, verify and offer imaginative support to creative findings in result of fulfilling the studio design tasks in the educational process. The main one is the design of urban spatial structures. The laboratory methodology is in the first place oriented on the analogue-digital procedures of "endoscope" model simulation. At the same time it also explores and looks for new unconventional forms of visual communication or archiving as imagination support to specialist and laymen participants in creative, valorization and approval processes.
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	acadia11_334
id	acadia11_334
authors	Khoo, Chin Koi; Burry, Jane; Burry, Mark
year	2011
title	Soft Responsive Kinetic System: An Elastic Transformable Architectural Skin for Climatic and Visual Control
doi	https://doi.org/10.52842/conf.acadia.2011.334
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 334-341
summary	Most designers of dynamic building skins that reconfigure themselves in changing conditions have utilised mechanical systems. However, when designing for dynamic responsiveness, these systems often involve intricate and high-tech mechanistic joints, actuators and control. This research investigates the possibility of the ‘soft’ form-changing material systems to minimise the use of ‘hard’ mechanical components for kinetic responsive architectural skins. The research goal is to develop a prototype system that can be used to retrofit an existing building with an application of a ‘second skin’ that performs well in various climate conditions and is visually compelling. This approach is tested by the prototype, namely “Curtain”. It serves two fundamental purposes: Comfort and Cosmetic, to improve the existing interior and exterior spatial conditions. As an early proposition, the significance of this research offers a practical method for realising a ‘soft’ transformable architectural skin that synthesises passive cooling, manipulates sunlight and is set as an active shading device. Parametric design is used to explore and simulate these climatic and visual design constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	caadria2011_007
id	caadria2011_007
authors	Ko, Kaon and Salvator-John Liotta
year	2011
title	Digital tea house: Japanese tea ceremony as a pretext for exploring parametric design and digital fabrication in architectural education
doi	https://doi.org/10.52842/conf.caadria.2011.071
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 71-80
summary	This paper reviews the Digital Tea House, a joint workshop in August of 2010 held at the University of Tokyo, Department of Architecture, together with Columbia University GSAPP. Three pavilions for hosting ceremony were designed and built in less than one month, in an attempt to bridge technology and culture not only through design but also fabrication. Issues addressed in the process included applications of computational design, interpretations of tradition and culture in spatial or activity oriented expressions, structural stability, to practical solutions for quick physical materialization. Three teams comprised of 6 to 8 students, each a blend of different nationalities, ultimately produced 3 full-scale tea houses with the same software, primary material, budget, and principal fabrication method.
keywords	Digital fabrication; academic workshop; computational design; design-build; tea house
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac20109203
id	ijac20109203
authors	Martini, Kirk
year	2011
title	Optimization and parametric modelling to support conceptual structural design
source	International Journal of Architectural Computing vol. 9 - no. 2, 151-166
summary	The paper describes software combining parametric geometric modeling with a version of the harmony search method, modified to support multimodal structural optimization. Researchers have recognized the potential of population-based optimization methods, such as genetic algorithms, to support multimodal optimization: that is, generating a diverse range of good alternative solutions, rather than a single best solution. Among these methods is the harmony search method, which has been demonstrated to be efficient in many unimodal structural optimization problems. The paper describes a new version of the harmony search method, implemented as an assembly within Bentley's Generative Components, enabling high-level control of geometry. The new method is demonstrated on an bridge supported by two inclined parabolic arches, a structure where GC controls a complex geometry with a single variable. Comparative studies of the example find that the new method is more effective than conventional harmony search in consistently finding multiple good solutions.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2011_088
id	ecaade2011_088
authors	Paio, Alexandra; Reis, Joaquim; Santos, Filipe; Lopes, Pedro Faria; Eloy, Sara; Rato, Vasco
year	2011
title	Emerg.cities4all: Towards a shape grammar based computational system tool for generating a sustainable and integrated urban design
doi	https://doi.org/10.52842/conf.ecaade.2011.152
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.152-158
summary	The ongoing research project called “Emerg.cities4all” is focused on the development of a generative computer-aided planning support system for cities and housing to low-income populations, using a descriptive method as the Shape Grammars and based on multi-agent rule-based system. The goal is to develop a system that could reveal the cultural, social and spatial dynamics involved in the genesis of informal settlements (favelas, musseques and caniços) and use it to generate contemporary humanized urban morphologies. The multi agent shape grammar implementation could generate automatically designs according to different types of users: urban planners, architect and local end users. This paper presents the methodology and the initial results of the research, using an informal settlement as a case study.
wos	WOS:000335665500017
keywords	Shape grammar; Multi-agent systems; Urban design; Informal settlements; Emergcities4all
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_122
id	acadia11_122
authors	Pigram, David; McGee, Wes
year	2011
title	Formation Embedded Design: A methodology for the integration of fabrication constraints into architectural design
doi	https://doi.org/10.52842/conf.acadia.2011.122
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 122-131
summary	This paper presents a methodology for the integration of fabrication constraints within the architectural design process through custom written algorithms for fabrication. The method enables the translation from three-dimensional geometry, or algorithmically produced data, into appropriately formatted machine codes for direct CNC fabrication within a single CAD modeling environment. This process is traditionally one-way with part files translated via dedicated machine programming software (CAM). By integrating the toolpath creation into the design package, with an open framework, the translation from part to machine code can be automated, parametrically driven by the generative algorithms or explicitly modeled by the user. This integrated approach opens the possibility for direct and instantaneous feedback between fabrication constraints and design intent. The potentials of the method are shown by discussing the computational workflow and process integration of a diverse set of fabrication techniques in conjunction with a KUKA 7-Axis Industrial Robot. Two-dimensional knife-cutting, large-scale additive fabrication (foam deposition), robot-mounted hot-wire cutting, and robot-assisted rod-bending are each briefly described. The productive value of this research is that it opens the possibility of a much stronger network of feedback relations between formational design processes and material and fabrication concerns.
keywords	robotic fabrication; multi-axis; file-to-factory, open-source fabrication, parametric modeling, computational design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ijac20109201
id	ijac20109201
authors	Ramsgard Thomsen, Mette; Martin Tamke, Jacob Riiber Nielsen
year	2011
title	Generating a scalar logic: producing the "it's a SMALL world" exhibition
source	International Journal of Architectural Computing vol. 9 - no. 2, 115-132
summary	This paper presents the design project “it’s a SMALL world”, an exhibition design developed for the Danish Design Centre in 2009.The project investigates the making of a generative design environment by which multiple design parameters as from program, site or the subsequent digital fabrication and assembly process can be negotiated. In this paper we discuss methods for understanding the emergent interrelationships between encoded parameters, how to manage these and their impact on design.The implementation of the design necessitated a novel design method that allowed to blend the qualities of a generative design approach, that can adapt through recursion gradually to local requirements, with explicit definitions.The project showcases with its new developed manufacturing system for non- standard element how customized digital design and production tools allow for a novel nearness to material and new ways of production and collaboration of architects, engineers and the crafts.
series	journal
last changed	2019/05/24 09:55

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_117
id	ecaade2011_117
authors	Albayrak, Canan; Tunçer, Bige
year	2011
title	Performative architecture as a guideline for transformation: Defense Line of Amsterdam
doi	https://doi.org/10.52842/conf.ecaade.2011.501
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.501-510
summary	Performance as an architectural design paradigm has been emerging during the recent years. We have developed an understanding that we formalized as a taxonomy for performative architecture that considers performance from three points of view: health, safety and security performance; functional and efficiency performance; and psychological, social, cultural, and esthetic performance. This paper focuses on a design project that explores these ideas as a performative architecture proposal. The project focuses on the architectural transformation of the Defense Line of Amsterdam, 41 forts, as a green belt. This transformation considers a holistic approach of defining a general method and guideline. We developed a series of parametric models for the definition and generation of designs. The first model computes an urbanization level for each fort. Consequently, models are developed in 4 stages: regional design, urban design, building design, and production of a scale model, and these are applied in an iterative manner to reach design outcomes for the project.
wos	WOS:000335665500058
keywords	Performative architecture; performance evaluation; taxonomy; parametric modeling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p098
id	cf2011_p098
authors	Bernal, Marcelo; Eastman Charles
year	2011
title	Top-down Approach for Interaction of Knowledge-Based Parametric Objects and Preliminary Massing Studies for Decision Making in Early Design Stages
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 149-164.
summary	Design activities vary from high-degree of freedom in early concept design stages to highly constrained solution spaces in late ones. Such late developments entail large amount of expertise from technical domains. Multiple parallel models handle different aspects of a project, from geometric master models to specific building components. This variety of models must keep consistency with the design intent while they are dealing with specific domains of knowledge such as architectural design, structure, HVAC, MEP, or plumbing systems. Most of the expertise embedded within the above domains can be translated into parametric objects by capturing design and engineering knowledge through parameters, constraints, or conditionals. The aim of this research is capturing such expertise into knowledge-based parametric objects (KPO) for re-usability along the design process. The proposed case study ‚Äì provided by SOM New York‚ is the interaction between a massing study of a high-rise and its building service core, which at the same time handles elevators, restrooms, emergency stairs, and space for technical systems. This project is focused on capturing design expertise, involved in the definition of a building service core, from a high-rise senior designer, and re-using this object for interaction in real-time with a preliminary massing study model of a building, which will drive the adaption process of the service core. This interaction attempts to provide an integrated design environment for feedback from technical domains to early design stages for decision-making, and generate a well-defined first building draft. The challenges addressed to drive the instantiation of the service core according to the shifting characteristics of the high-rise are automatic instantiation and adaptation of objects based on decision rules, and updating in real-time shared parameters and information derived from the high-rise massing study. The interaction between both models facilitates the process from the designer‚Äôs perspective of reusing previous design solutions in new projects. The massing study model is the component that handles information from the perspective of the outer shape design intent. Variations at this massing study model level drive the behavior of the service core model, which must adapt its configuration to the shifting geometry of the building during design exploration in early concept design stages. These variations depend on a list of inputs derived from multiple sources such as variable lot sizes, building type, variable square footage of the building, considerations about modularity, number of stories, floor-to-floor height, total building height, or total building square footage. The shifting combination of this set of parameters determines the final aspect of the building and, consequently, the final configuration of the service core. The service core is the second component involved in the automatic generation of a building draft. In the context of BIM, it is an assembly of objects, which contains other objects representing elevators, restrooms, emergency stairs, and space for several technical systems. This assembly is driven by different layouts depending on the building type, a drop-off sequence, which is the process of continuous reduction of elevators along the building, and how this reduction affects the re-arrangement of the service core layout. Results from this research involves a methodology for capturing design knowledge, a methodology for defining the architecture of smart parametric objects, and a method for real-time-feedback for decision making in early design stages. The project also wants to demonstrate the feasibility of continuous growth on top of existing parametric objects allowing the creation of libraries of smart re-usable objects for automation in design.
keywords	design automation, parametric modeling, design rules, knowledge-based design
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2018_1359
id	sigradi2018_1359
authors	Bertola Duarte, Rovenir; Ziger Dalgallo, Ayla; Consalter Diniz, Maria Luisa; Romão Magoga, Thais
year	2018
title	A window to the autism: the political role of the difference of an objectile in the homogeneous school
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 848-853
summary	This paper approaches the insertion of an objectile in the homogeneous space of a school, looking to bring flexibility and responsiveness to assist a user with Autism Spectrum Disorder (ASD). The research concerns with photosensitivity, a problem faced by almost 25% of the children with autism (Miller-Horn; Spence; Takeoka, 2011). The study is based on the theories for ASD environments that speak of ‘sensorial perception’ and ‘thinking with imagery’ (Mostafa, 2008), and the coexistence of Sensory Design Theory and Neuro-Typical Method (Pomana, 2015). The result consists of a gadget developed in MIT App Inventor tool and a curtain that interact responsively through an Arduino code, for a new connection between the user and his surroundings.
keywords	Objectile; Responsive Architecture; Architecture and autism; ASD; Inclusive school
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	b339
id	b339
authors	Bunster, Victor
year	2011
title	Tropism-oriented generative design: Analogical models for heterogeneous goal integration
source	Master of Philosophy (MPhil) Thesis. Faculty of Architecture, Building and Planning, The University of Melbourne.
summary	Architecture often requires integration between heterogeneous objectives. Both empirical requirements and speculative aspirations inform design in ways that resist ready formalization under computerizable logic. This thesis explores the possibilities of tropism-analogy as strategy for tackling some of these diverse objectives in a generative system. The feasibility of addressing heterogeneous goals with a computerizable design system is established by reviewing the role of rule-based strategies in vernacular tradition and the possibilities of analogies in recent generative methods. Then, the concept of tropism is analysed in depth, starting from its origins to its manifestation in a broad range of disciplines. This analysis leads to the definition of tropism as a ‘process of turn’ that enables purposeful connections between a system and its environment, an invariant property that may result in different levels of adaptation. These generalized conditions are used as conceptual foundation to explore analogical connections between divergent dimensions of architectural problems, and to define a feedback-enabled generative system that uses tropism-inspired rules in tackling contrasting design objectives. This system is implemented as a proof-of-concept for the Chilean social housing program, where is used to generate façade prototypes that respond simultaneously to thermal comfort and formal expression criteria. The outcomes of this thesis suggest that tropism-analogy can be used in tackling heterogeneous façade objectives and, therefore, to define novel design methods to explore goal-integration in computer-based generative architecture systems.
keywords	generative architecture, design computation, tropism analogy, goal integration, social housing
series	thesis:MSc
type	normal paper
email
more	http://dtl.unimelb.edu.au/R/98KH7M6SLEUI1J2GUA82K5A1AQSR7NK9HMI4GPCRJGFAEYDGHF-01472?func=dbin-jump-full&object_id=277253&local_base=GEN01&pds_handle=GUEST
last changed	2012/07/06 17:57

For more results click below: