Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 563

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_117
id	ecaade2011_117
authors	Albayrak, Canan; Tunçer, Bige
year	2011
title	Performative architecture as a guideline for transformation: Defense Line of Amsterdam
doi	https://doi.org/10.52842/conf.ecaade.2011.501
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.501-510
summary	Performance as an architectural design paradigm has been emerging during the recent years. We have developed an understanding that we formalized as a taxonomy for performative architecture that considers performance from three points of view: health, safety and security performance; functional and efficiency performance; and psychological, social, cultural, and esthetic performance. This paper focuses on a design project that explores these ideas as a performative architecture proposal. The project focuses on the architectural transformation of the Defense Line of Amsterdam, 41 forts, as a green belt. This transformation considers a holistic approach of defining a general method and guideline. We developed a series of parametric models for the definition and generation of designs. The first model computes an urbanization level for each fort. Consequently, models are developed in 4 stages: regional design, urban design, building design, and production of a scale model, and these are applied in an iterative manner to reach design outcomes for the project.
wos	WOS:000335665500058
keywords	Performative architecture; performance evaluation; taxonomy; parametric modeling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_396
id	acadia11_396
authors	Lim, Jason
year	2011
title	Let’s Work Together: A Stigmergic Approach to Acoustic Design
doi	https://doi.org/10.52842/conf.acadia.2011.396
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 396-403
summary	This paper explores the application of agent-based modeling techniques to the domain of acoustics design. Concepts derived from Stigmergy, which is a class of mechanisms that mediate interactions between social organisms, are applied to a custom implementation of a raytracing based acoustics simulator. Rays are given the agency of changing the geometric and material properties of the surfaces they come in contact with during the raytracing phase. The acoustic simulation process is an active one, where the modeled room environment is adapted while being evaluated. Given performance criteria as input, the simulation process is applied to an auditorium example. The auditorium is adapted and its eventual emergent design has improved acoustic performance. It is hoped that this work will demonstrate the potential of coupling multi-agent systems with simulation processes in order to create new design tools.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 07:59

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_146
id	ecaade2011_146
authors	Hunter, Moira; Chase, Scott; Kligerman, Bradley; Zupancic, Tadeja
year	2011
title	ARCHI21: Architectural and Design based Education and Practice through Content & Language Integrated Learning using Immersive Virtual Environments for 21st Century Skills
doi	https://doi.org/10.52842/conf.ecaade.2011.725
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.725-733
summary	This paper offers insights into innovative practice being undertaken in higher architectural and design education, where both language and content teaching and learning are integrated as interwoven parts with joint curricular roles. Using Expansive Learning Theory as an analytical framework to examine potential tensions and contradictions arising from the educational approach of Content and Language Integrated Learning, reference is made to three very recent pilot studies of the EU funded project, ARCHI21. The experiential learning in these studies adopted a blended approach, where classical face-to-face learning-teaching scenarios were supported by immersive 3D virtual environments together with social networking media and Web 2.0 tools. This paper uses these pilot studies to speculate on aspects of fragility and offers reflection on future project activity.
wos	WOS:000335665500084
keywords	Architecture; education; Content and Language Integrated Learning; 3D immersive environments; Second Life
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p095
id	cf2011_p095
authors	Shin, Dongyoun; Muller Arisona Stefan, Schmitt Gerhard
year	2011
title	Crowdsourcing Urban Simulation Platform Using Mobile Devices and Social Networking Media Technologies
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 233-246.
summary	Introduction and Research Questions The research area of urban simulation methods has grown notably in recent decades. Most of the research topics that concern urban simulation have concentrated on defining the complexities of urban environments with certain rules and algorithms. However, cities are getting more complex and changes to them are being made at greater speed. Therefore, current urban simulation modeling approaches based on rules and protocols are still struggling to reduce the gap between the virtual simulation environment and the real cities, since the behavior of citizens is frequently unpredictable and continuously adapting. In this context, research is necessary to develop more fundamental simulation methods that can handle these complexities and changes, leading to new design decision support systems. Therefore, this research was motivated with the following questions: What is the origin of the complexities and transformations of the urban environment? How can we approach the origin to deal with the urban complexities and transformations? To answer these questions, we hypothesize that the diverse human intentions are the origin of the issues that result from all of the complexities and changes of the cities. General Objectives As a result, we propose a participatory simulation environment that brings human intention into the urban simulator: a crowdsourcing [1] simulation platform that is operated by the people‚Äôs participation. To achieve this crowdsourcing urban sustainability simulation environment, we must address the following research issues: categorization of urban sustainability indicators and technologies, inducing mass participations, and an implementation of social network services. Furthermore, we aim at using mobile computing devices, such as smart phones, as a terminal to the simulation environment. Fundamental Goals Our goal is to enable people to share urban information at any time and to compare each other‚Äôs contributions through the crowdsourcing urban simulation platform. The information will be returned to the citizens to support their sustainability-aware life. The simulation platform also gives a chance not only to compare each other‚Äôs levels of sustainability, but also to give self-satisfaction through an altruistic contribution for a sustainable future. Thus, people shall utilize the simulator in order to predict their individual or cities‚Äô future sustainability. Meanwhile, the user data will be collected and delivered to the central server in order to analyze the urban sustainability. Consequently, we can measure the urban sustainability based on a real human interaction, and compare individuals as well as cities. The whole process of this research is presented as a new paradigm of an urban simulator that reflects the urban complexities and the inconstant human mind changes. Specific Objectives of This Paper This paper will represent strategies of the crowdsourcing urban simulation which can make a paradigm shift of urban simulation and shall define the customized sustainable indicators for the initial steps of this research. It shows how as system for can communicate with the public using the current technologies: high performance mobile media, social network services and wide-area geospatial information systems. Furthermore, for the first step of this research, the paper defines the urban sustainability indicators, and their categorization is generalized and translated into simpler ways to support the citizen‚ intuitive understanding.
keywords	Crowdsourcing, Urban sustainability, Multi-agent based simulation, Social network services
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2020_181
id	ecaade2020_181
authors	Soltani, Sahar, Dias Guimaraes, Gabriela, Liao, Pan, Calixto, Victor and Gu, Ning
year	2020
title	Computational Design Sustainability: A Conceptual Framework for Built Environment Research
doi	https://doi.org/10.52842/conf.ecaade.2020.1.219
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 219-228
summary	This paper presents and demonstrates a "Computational Design Sustainability" (CDS) framework, inspired by "Computational Sustainability" (CS), which is a new area in computational research (C. Gomes & Yang, 2011). CS aims to apply techniques from computer science to address sustainability problems affecting a wide range of fields from environmental sciences to social studies. While CS has been broadly embraced in environmental science, the great potential of this concept to address grand challenges and solve complex problems seems to have not been adequately explored in the built environment domain. Therefore, this paper attempts to formally investigate the application of CS in built environment research addressing different scales of design problems with computational design through proposing the new concept of CDS . These approaches are demonstrated and evaluated through a range of projects collectively conducted by the research team. CDS proposes to advance computational deign research by creating a trade-off between pillars of sustainability in an integrated multifaceted and multidisciplinary approach. The presented conceptual framework provides a formal means to critically understand and further advance these approaches in a systematic way suitable for future development and broader application.
keywords	Computational Design Sustainability; Computational Sustainability; Computational Design; Sustainable Development; Built Environment Research
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2011_077
id	ecaade2011_077
authors	Ettlinger, Or
year	2011
title	The Perceptual, the Virtual, and the Real: On the experience of place in the digital age
doi	https://doi.org/10.52842/conf.ecaade.2011.925
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.925-932
summary	Since the dawn of philosophical thought man has questioned the validity of his experience of the world around him: Is the world just as we perceive it to be, or does its true essence lie beyond our reach? In our own time, technological, social, and economic developments have made such philosophical concerns more relevant to our everyday lives than ever before. However, the available terminology for discussing such matters is often too limited to fully capture their nature. This paper proposes a consistent terminology for the discussion of such matters and suggests a model of the different aspects from which they are comprised. This terminology will be applied to, as well as presented through, issues that are pertinent to architectural theory, to the experience of places, and to the intangible sense of place which digital phenomena can sometimes provide.
wos	WOS:000335665500106
keywords	Architectural theory; media theory; perceptual; virtual; real
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_222
id	sigradi2011_222
authors	Faria Lopes, Pedro; Reis, Joaquim; Santos, Filipe; Eloy, Sara; Paio, Alexandra; Rato, Vasco
year	2011
title	Shaping emergent cities for all
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 107-109
summary	This paper describes work in progress in the area of producing affordable housing to underprivileged populations living in slums. This project is being developed recurring to a Shape Grammar approach, using a direct input strategy targeted to the common user with non digital expertise. The diversity of solutions are to be applied to three case studies in Mozambique, Angola and Brazil.
keywords	Interface design; shape grammar; agents; housing
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	acadiaregional2011_003
id	acadiaregional2011_003
authors	Howe, Nathan
year	2011
title	Algorithmic Modeling: Teaching Architecture in Digital Age
doi	https://doi.org/10.52842/conf.acadia.2011.x.a0p
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
summary	Can a working knowledge of algorithmic modeling augment student understanding of building architecture? This question is fundamental when addressing student design education today. This paper demonstrates that when students apply a reductive process more in line with Newell, Shaw and Simon (Newell, Shaw and Simon 1957), they can break down a complex problem into simpler and simpler terms until the problem can be resolved. This type of reduction can be applied systematically to the parametric-driven form through reverse engineering. In the process of reverse engineering, students begin to connect descriptive geometry with complex form, breaking down the complex form into its simplest parts. This design process of reduction and reverse engineering leads designers to take a more systematic approach to theoretical ideas, at once creating complex constructs while pragmatically attacking the issues of buildable form. This paper will delve into teaching analytical tools so students not only comprehend the input of form-making, but the necessary output to test building and material concepts. Fostering a clear methodology for testing built form within the design process also furthers the student’s development as a problem solver and design innovator.
series	ACADIA
last changed	2022/06/07 07:49

_id	caadria2011_045
id	caadria2011_045
authors	Indraprastha, Aswin and Michihiko Shinozaki
year	2011
title	Computational method for mapping quality of architectural space
doi	https://doi.org/10.52842/conf.caadria.2011.473
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 473-482
summary	The key aim of this paper is to develop a computational method for mapping architectural space used for visual openness analysis. We suggest that the result will offer possibilities for quantitative design analysis particularly on spatial quality influenced by architectural elements. The proposed method consists of two stages: determination of subdivided enclosed spaces and measuring quality using visual openness parameters on each subdivided enclosed space. We advise new approach to determine subdivided enclosed spaces on architectural plan by determining two factors: bounded space and circulation space. Computational procedures applied to analyse architectural plan and then determine map of subdivided enclosed space by analysing relationship of these two factors. The concept underlying this method is that architectural space is composed of subdivided enclosed spaces, which each of them have distinct physical properties and therefore become possible to develop mapping of evaluation regarding the quality of architectural space. Our finding on orthogonal architectural plan provides ranking index of subdivided enclosed spaces that could help for analysing spatial quality of architectural space.
keywords	Architectural space; subdivided enclose space; quality mapping; computational method
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2011_p075
id	cf2011_p075
authors	Janssen, Patrick; Chen Kian Wee
year	2011
title	Visual Dataflow Modelling: A Comparison of Three Systems
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 801-816.
summary	Visual programming languages enable users to create computer programs by manipulating graphical elements rather than by entering text. The difference between textual languages and visual languages is that most textual languages use a procedural programming model, while most visual languages use a dataflow programming model. When visual programming is applied to design, it results in a new modelling approach that we refer to 'visual dataflow modelling' (VDM). Recently, VDM has becoming increasingly popular within the design community, as it can accelerate the iterative design process, thereby allowing larger numbers of design possibilities to be explored. Furthermore, it is now also becoming an important tool in performance-based design approaches, since it may potentially enable the closing of the loop between design development and design evaluation. A number of CAD systems now provide VDM interfaces, allowing designers to define form generating procedures without having to resort to scripting or programming. However, these environments have certain weaknesses that limit their usability. This paper will analyse these weaknesses by comparing and contrasting three VDM environments: McNeel Grasshopper, Bentley Generative Components, and Sidefx Houdini. The paper will focus on five key areas: * Conditional logic allow rules to be applied to geometric entities that control how they behave. Such rules will typically be defined as if-then-else conditions, where an action will be executed if a particular condition is true. A more advanced version of this is the while loop, where the action within the loop will be repeatedly executed while a certain condition remains true. * Local coordinate systems allow geometric entities to be manipulated relative to some convenient local point of reference. These systems may be either two-dimensional or three-dimensional, using either Cartesian, cylindrical, or spherical systems. Techniques for mapping geometric entities from one coordinate system to another also need to be considered. * Duplication includes three types: simple duplication, endogenous duplication, and exogenous duplication. Simple duplication consists of copying some geometric entity a certain number of times, producing identical copies of the original. Endogenous duplication consist of copying some geometric entity by applying a set of transformations that are defined as part of the duplication process. Lastly, exogenous duplication consists of copying some geometric entity by applying a set of transformations that are defined by some other external geometry. * Part-whole relationships allow geometric entities to be grouped in various ways, based on the fundamental set-theoretic concept that entities can be members of sets, and sets can be members of other sets. Ways of aggregating data into both hierarchical and non-hierarchical structures, and ways of filtering data based on these structures need to be considered. * Spatial queries include relationships between geometric entities such as touching, crossing, overlapping, or containing. More advanced spatial queries include various distance based queries and various sorting queries (e.g. sorting all entities based on position) and filtering queries (e.g. finding all entities with a certain distance from a point). For each of these five areas, a simple benchmarking test case has been developed. For example, for conditional logic, the test case consists of a simple room with a single window with a condition: the window should always be in the longest north-facing wall. If the room is rotated or its dimensions changed, then the window must re-evaluate itself and possibly change position to a different wall. For each benchmarking test-case, visual programs are implemented in each of the three VDM environments. The visual programs are then compared and contrasted, focusing on two areas. First, the type of constructs used in each of these environments are compared and contrasted. Second, the cognitive complexity of the visual programming task in each of these environments are compared and contrasted.
keywords	visual, dataflow, programming, parametric, modelling
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20119405
id	ijac20119405
authors	Koi Khoo, Chin; Flora Salim and Jane Burry
year	2011
title	Designing Architectural Morphing Skins with Elastic Modular Systems
source	International Journal of Architectural Computing vol. 9 - no. 4, 379-419
summary	This paper discusses the issues of designing architectural skins that can be physically morphed to adapt to changing needs.To achieve this architectural vision, designers have focused on developing mechanical joints, components, and systems for actuation and kinetic transformation. However, the unexplored approach of using lightweight elastic form-changing materials provides an opportunity for designing responsive architectural skins and skeletons with fewer mechanical operations. This research aims to develop elastic modular systems that can be applied as a second skin or brise-soleil to existing buildings.The use of the second skin has the potential to allow existing buildings to perform better in various climatic conditions and to provide a visually compelling skin.This approach is evaluated through three design experiments with prototypes, namely Tent, Curtain and Blind, to serve two fundamental purposes: Comfort and Communication.These experimental prototypes explore the use of digital and physical computation embedded in form-changing materials to design architectural morphing skins that manipulate sunlight and act as responsive shading devices.
series	journal
last changed	2019/07/30 10:55

_id	sigradi2011_197
id	sigradi2011_197
authors	Lara, Arthur H.; Giacaglia, Marcelo E.; da Silva Moura, Norberto
year	2011
title	Intervenções Urbanas Paramétricas [Urban Parametric Interventions]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 500-502
summary	Renowned Architecture schools are acting globally by means of international workshops. In these, new methodo- logies of digital parametric representations are applied in urban interventions. We bring forward an inflatable solution for sheltering a sports event, held under a viaduct. In this case, parametric technology was employed in the design, with the use of digital fabrication. Several other interventions were proposed for the same space chosen for the action of a multidisciplinary group of professors. Differently from government actions that usually focus on the removal of social problems this workshop sought a solution through technology, new materials and parametric design.
keywords	Parametric design; urban interventions; metaballs; augmented culture
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	eaea2009_loerincz_szilagyi_urbin
id	eaea2009_loerincz_szilagyi_urbin
authors	Loerincz, Daniel; Brigitta Szilagyi, Agnes Urbin
year	2011
title	Space Representation with Six Vanishing Points
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 161-171
summary	Even the antique world’s scientists were interested in the problem of realistic space representation. Renaissance artists realized the first significant results with the one landmark perspective: in this mode the relative positions of objects are easy to define. Leonardo da Vinci discovered that the one-point perspective shows in different measure the objects in the same distances from the viewer but different distances from the landmark. To eliminate this problem he applied the natural perspective for the first time (two-point perspective). With this method he extended the field of view to 90° (in line with the horizon). Later the three-point perspective made possible to represent those objects which have quite large extension in all directions. Because of the feature of the human eye in everyday life we only need these three space representations. The extension of the field of view raises the problem that parallel lines seem to run to different landmarks. So we can conclude that in case of large field of view the images of straight lines are usually not straight lines. This paradox is possible because in case of perspectives with one two and three vanishing points we represent only half lines on the paper and we neglect three more landmarks. It’s easy to see that if two parallel lines meet in front of us, it must happen in the same way behind us. The six- point perspective is a space representation which takes these problems into consideration. In this way we are able to represent on a terminate field the whole space around us except the viewpoint. This system can terminate the rank of the perspectives started with the traditional one-, two- and three- point perspectives and continued with the four- and five-point perspectives. In literature we can find some book about art which is engaged in this system and gives alternative solutions against the conventional space representations and some enterprising artist are making experiments in this field.
series	other
type	normal paper
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:54

_id	ecaade2020_147
id	ecaade2020_147
authors	Matìjovská, Dana and Achten, Henri
year	2020
title	It’s Art Baby - The Science of Comparing and Scoring Artistic Endeavour at Schools of Higher Education
doi	https://doi.org/10.52842/conf.ecaade.2020.2.527
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 527-534
summary	Scientific output has well-established methods for comparing and scoring the quality and quantity of the work. For artistic output this matter is not settled at all and a subject of much debate. We present a method which has been developed in Czech republic since 2011. This method is used to compare and score the artistic output of all schools of arts in the country (for example, music, performative arts, architecture, literature, sculpture, painting). The system presented in this paper is based on the Saaty-method (also known as Analytic Hierarchy Process). After almost eight years of development and use, the system has proven as a valuable asset to assess in an objective way output between many different forms of artistic works. In 2016 the system was incorporated in the Higher Education Act. In the paper we present a brief history of the development and the principles of AHP applied in the system. In particular, we will focus on the findings in architecture derived from the system. Finally, we will discuss possible implications for architectural education in general.
keywords	Register of Artistic Performance; SAATY method
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2011_234
id	sigradi2011_234
authors	Nome, Carlos; Clayton, Mark J.; Aguiar, Marcela
year	2011
title	BIM: configurações e desdobramentos para implementação prática e ensino de arquitetura [BIM: configurations and unfoldings for implementation in practice and architectural education]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 507-511
summary	This paper reports on the initial findings of a long term case study. It focuses on the BIM implementation efforts for Brazilian public firms that are responsible for the design, construction and management of buildings, infrastructure and urban spaces. It was postulated that BIM implementation could bring to Brazilian public institutions benefits similar to the ones achieved in the US, yet at a different cost structure. Research follows a mixed methods approach using focus groups and quasi experiments. Results describe obstacles encountered, benefits realized, and process changes expected that result from Brazilian socio-cultural context applied to public institutions.
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	acadia11_106
id	acadia11_106
authors	Parsons, Ronnie; Akos, Gil
year	2011
title	Form Force Matter: Investigating form-active systems through analog machines and physics-based simulation
doi	https://doi.org/10.52842/conf.acadia.2011.106
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 106-109
summary	Form-active Systems offer an intuitive means of gaining direct and tangible knowledge for addressing architectural design problems with degrees of complexity typically beyond our capacity or desire to engage as designers. With these systems as a mechanism for research, we may establish a rich territory in which form, force, and matter are inherently imbricated in their conceptual domain. Furthermore, if we approach this conceptual terrain with an understanding that the elements of these systems exist along a continuum between the real and the virtual, we may incorporate methods and techniques in the form of analog machines and physics-based simulation from architecture’s peripheral fields of structural engineering, physics, and computation. This paper presents an applied research framework undertaken in a continued sequence of seminars whereby Form-active Systems are analyzed for their performative characteristics, synthesized for operative design strategies, iteratively prototyped across scales, and redeployed within the context of a multi-story installation.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 08:00

_id	ecaade2011_173
id	ecaade2011_173
authors	Tauscher, Helga; Scherer, Raimar J.
year	2011
title	Area cartograms in building product model visualization: A case study on the presentation of non-spatial object properties in spatial context with anamorphic maps
doi	https://doi.org/10.52842/conf.ecaade.2011.444
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.444-450
summary	Existing presentation of building information models is mostly based on a 1:1 mapping of spatial information to spatial visualisation parameters. This approach limits the presentability of non-spatial properties and can even produce misleading presentations. An area cartogram is a type of map where the size of the areas is tied to some non-spatial value instead of the real size of the object. We identified five types of cartograms, applied them to typical building geometry and evaluated the resulting presentations in terms of readability. Finally a use case scenario is given to prove the need of such formal studies and to provide the basis for further evaluation.
wos	WOS:000335665500051
keywords	Building information model; information visualization; area cartogram; spatial structure; building element structure
series	eCAADe
email
last changed	2022/05/01 23:21

For more results click below: