Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 448

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_035
id	ecaade2011_035
authors	Krieg, Oliver David; Dierichs, Karola; Reichert, Steffen; Schwinn, Tobias; Menges, Achim
year	2011
title	Performative Architectural Morphology: Robotically manufactured biomimetic finger-joined plate structures
doi	https://doi.org/10.52842/conf.ecaade.2011.573
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.573-580
summary	Performative Architectural Morphology is a notion derived from the term Functional Morphology in biology and describes the capacity of an architectural material system to adapt morphologically to specific internal constraints and external influences and forces. The paper presents a research project that investigates the possibilities and limitations of informing a robotically manufactured finger-joint system with principles derived from biological plate structures, such as sea urchins and sand dollars. Initially, the material system and robotic manufacturing advances are being introduced. Consequently, a performative catalogue is presented, that analyses both the biological system’s basic principles, the respective translation into a more informed manufacturing logic and the consequent architectural implications. The paper concludes to show how this biologically informed material system serves to more specifically respond to a given building environment.
wos	WOS:000335665500066
keywords	Robotic Manufacturing; Biomimetics; Parametric Design; Wood Joints; Plate Structures
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	b339
id	b339
authors	Bunster, Victor
year	2011
title	Tropism-oriented generative design: Analogical models for heterogeneous goal integration
source	Master of Philosophy (MPhil) Thesis. Faculty of Architecture, Building and Planning, The University of Melbourne.
summary	Architecture often requires integration between heterogeneous objectives. Both empirical requirements and speculative aspirations inform design in ways that resist ready formalization under computerizable logic. This thesis explores the possibilities of tropism-analogy as strategy for tackling some of these diverse objectives in a generative system. The feasibility of addressing heterogeneous goals with a computerizable design system is established by reviewing the role of rule-based strategies in vernacular tradition and the possibilities of analogies in recent generative methods. Then, the concept of tropism is analysed in depth, starting from its origins to its manifestation in a broad range of disciplines. This analysis leads to the definition of tropism as a ‘process of turn’ that enables purposeful connections between a system and its environment, an invariant property that may result in different levels of adaptation. These generalized conditions are used as conceptual foundation to explore analogical connections between divergent dimensions of architectural problems, and to define a feedback-enabled generative system that uses tropism-inspired rules in tackling contrasting design objectives. This system is implemented as a proof-of-concept for the Chilean social housing program, where is used to generate façade prototypes that respond simultaneously to thermal comfort and formal expression criteria. The outcomes of this thesis suggest that tropism-analogy can be used in tackling heterogeneous façade objectives and, therefore, to define novel design methods to explore goal-integration in computer-based generative architecture systems.
keywords	generative architecture, design computation, tropism analogy, goal integration, social housing
series	thesis:MSc
type	normal paper
email
more	http://dtl.unimelb.edu.au/R/98KH7M6SLEUI1J2GUA82K5A1AQSR7NK9HMI4GPCRJGFAEYDGHF-01472?func=dbin-jump-full&object_id=277253&local_base=GEN01&pds_handle=GUEST
last changed	2012/07/06 17:57

_id	acadia11_186
id	acadia11_186
authors	Chaturvedi, Sanhita; Colmenares, Esteban; Mundim, Thiago
year	2011
title	Knitectonics
doi	https://doi.org/10.52842/conf.acadia.2011.186
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 186-195
summary	The project Knitectonics aims at exploring digital fabrication systems that facilitate optimized, adaptive and specific integrated architectural solutions (Male-Alemany 2010). It is inspired by the beauty of nature systems with their inherent efficiency and performance. The research explored on-site fabrication of monocoques shells, integrating skin and structure along with services and infrastructure, using a simple household technique. It thus embodies a self organized micro system of textures and a macro system of structures. This paper elaborates how the numeric aspects of a textile technique were used, first to digitally imitate the process of assembly and further exploited to develop and visualize a novel fabrication system, based on material research and technical experimentation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_068
id	caadria2011_068
authors	Garagnani, Simone
year	2011
title	Packing the “Chinese box”: A strategy to manage knowledge using architectural digital models
doi	https://doi.org/10.52842/conf.caadria.2011.717
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 717-726
summary	The architectural design activity has been transformed due to technological advances in building knowledge management. The research proposed is based on a three years long Ph.D. work on 3D models intended as graphical informative systems, layered according to the “Chinese box” paradigm and destined to professionals and researchers in architecture. The applied case study is referred to San Vitale’s church in Ravenna, Italy: the monument was investigated through nested digital models produced by different computer programs. Passing through evolutionary steps identified as synthesis, reduction and projection, the resulting archive lowered its Complication Ratio, a numerical value inspired by fractal’s auto-similarity, indicating a recursive modification in morphologies and contents. Models so conceived are qualified as progressive knowledge-based catalogues easily interchangeable and useful to understand how new or existing architectures work. As a result of this approach, representations obtained with surveys, historical chronicles, light analysis and acoustic simulations were composed following gradual refinements: technical data were collected running parallel to bibliographic research, enriching interactive virtual models sprung from a recursive criterion destined to increase the information enclosed into an undivided, lossless, digital archive.
keywords	3D modelling; virtual architecture; BIM; CAAD; information database
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2020_181
id	ecaade2020_181
authors	Soltani, Sahar, Dias Guimaraes, Gabriela, Liao, Pan, Calixto, Victor and Gu, Ning
year	2020
title	Computational Design Sustainability: A Conceptual Framework for Built Environment Research
doi	https://doi.org/10.52842/conf.ecaade.2020.1.219
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 219-228
summary	This paper presents and demonstrates a "Computational Design Sustainability" (CDS) framework, inspired by "Computational Sustainability" (CS), which is a new area in computational research (C. Gomes & Yang, 2011). CS aims to apply techniques from computer science to address sustainability problems affecting a wide range of fields from environmental sciences to social studies. While CS has been broadly embraced in environmental science, the great potential of this concept to address grand challenges and solve complex problems seems to have not been adequately explored in the built environment domain. Therefore, this paper attempts to formally investigate the application of CS in built environment research addressing different scales of design problems with computational design through proposing the new concept of CDS . These approaches are demonstrated and evaluated through a range of projects collectively conducted by the research team. CDS proposes to advance computational deign research by creating a trade-off between pillars of sustainability in an integrated multifaceted and multidisciplinary approach. The presented conceptual framework provides a formal means to critically understand and further advance these approaches in a systematic way suitable for future development and broader application.
keywords	Computational Design Sustainability; Computational Sustainability; Computational Design; Sustainable Development; Built Environment Research
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2011_198
id	sigradi2011_198
authors	Aroztegui Massera, Carmen
year	2011
title	La cámara en la animación de arquitectura. Reconsiderando “la mirada” y el régimen de mostración en el cine [The Camera in Architectural Animation. Reconsidering “The Gaze” and The Registration Regime in the Cinema]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 432-435
summary	Even though inspired by cinema, architecture animations often oversimplify filmic space, and conflate two distinct concepts: gaze, and vision. Such misinterpretation leads to overuse camera movement to present spaces as if the change of point of view would lead to communicate lived space. This article introduces such discussion in the context of the tableau vivant, a living picture, explores the use of the shot sequence and the use of non-narrative scenes.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_022
id	ecaade2011_022
authors	Achten, Henri
year	2011
title	Degrees of Interaction: Towards a Classification
doi	https://doi.org/10.52842/conf.ecaade.2011.565
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.565-572
summary	In architecture various approaches have been developed do deal with changing demands on the building. The most recent development is interactive architecture. In this paper we aim to outline what interactive architecture is. First we define the type of performance behavior that an interactive building or environment has. Following, we consider the relation between the system and the user. We derive four types of relations, characterized as “perfect butler,” “partner,” “environmental,” and “wizard.” Interactive systems are composed of sensors, controllers, actuators, and materials. Various degrees of interactivity can be achieved with such systems, ranging from passive, reactive, autonomous, to agent systems. Complete with earlier discussion of design methods this provides the range of aspects that should be considered when designing interactive architecture.
wos	WOS:000335665500065
keywords	Interactive architecture; Human-Computer interaction; design theory
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_017
id	ecaade2011_017
authors	Achten, Henri; Koszewski, Krzysztof; Martens, Bob
year	2011
title	What happened after the “Hype” on Virtual Design Studios?: Some Considerations for a Roundtable Discussion
doi	https://doi.org/10.52842/conf.ecaade.2011.023
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.23-32
summary	The issue of collaborative design has been elaborated extensively within the framework of previous CAAD–conferences. Today, an appreciation for traditional attitudes and methods can be observed, but interestingly, a mixture of approaches is also noticeable (computational techniques used in low–tech fabrication environments, for example). This allows for a round–table survey of the current state–of–the–art focused on experiences related to distant learning in the architectural curriculum. To make VDS viable, not only are technological solutions necessary, but so are social (among people) and professional (ways of behavior) ones. In this round–table we aim to identify critical factors of success (or failure).
wos	WOS:000335665500001
keywords	Education; architectural curriculum; blended learning; collaborative design; VDS
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2011_099
id	ecaade2011_099
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems
doi	https://doi.org/10.52842/conf.ecaade.2011.799
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.799-808
summary	As computational design processes have moved from representation to simulation, the focus has shifted towards advanced integration of performance as a form defining measure. Performance, though, is often assessed purely on the level of geometry and stratified between hierarchically independent layers. When looking at tension-active membrane systems, performance is integrated across multiple levels and with only the membrane material itself, defining the structural, spatial and atmospheric qualities. The research described in this paper investigates the integrative nature of this type of lightweight structure and proposes methodologies for generating highly articulated and differentiated systems. As material is a critical component, the research focuses on a system-based approach which places priority on the inclusion of material research and parameterization into a behavior-based computational process.
wos	WOS:000335665500092
keywords	Material behavior; material computation; system; gestalt; tension-active system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_82
id	acadia11_82
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
doi	https://doi.org/10.52842/conf.acadia.2011.082
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
summary	With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2011_052
id	caadria2011_052
authors	Al-Kazzaz, Dhuha A. and Alan Bridges
year	2011
title	Assessing innovation in hybrid designs using shape grammars
doi	https://doi.org/10.52842/conf.caadria.2011.545
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 545-554
summary	Al-kazzaz et al (2010) described hybrid adaption technique to generate innovative designs from heterogeneous precedents using shape grammars. An evaluation of the degree of innovation in the hybrid designs gave feedback to grammar users before and after applying a rule. Innovation was assessed using variables derived from the internal structure of the grammar such as: the number of antecedents in the corpus having the same rule; the number of rules in a subclass rule set having the same geometry; etc. However, the validity of the innovation assessment was unclear and the use of the feedback measures was not demonstrated. Accordingly, this study aims to verify the credibility of the innovation measures and to identify the independent variables that a user can control to achieve a significant impact on each innovation measure as a dependent variable.
keywords	Shape grammars; hybrid design; innovation assessment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2011_117
id	ecaade2011_117
authors	Albayrak, Canan; Tunçer, Bige
year	2011
title	Performative architecture as a guideline for transformation: Defense Line of Amsterdam
doi	https://doi.org/10.52842/conf.ecaade.2011.501
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.501-510
summary	Performance as an architectural design paradigm has been emerging during the recent years. We have developed an understanding that we formalized as a taxonomy for performative architecture that considers performance from three points of view: health, safety and security performance; functional and efficiency performance; and psychological, social, cultural, and esthetic performance. This paper focuses on a design project that explores these ideas as a performative architecture proposal. The project focuses on the architectural transformation of the Defense Line of Amsterdam, 41 forts, as a green belt. This transformation considers a holistic approach of defining a general method and guideline. We developed a series of parametric models for the definition and generation of designs. The first model computes an urbanization level for each fort. Consequently, models are developed in 4 stages: regional design, urban design, building design, and production of a scale model, and these are applied in an iterative manner to reach design outcomes for the project.
wos	WOS:000335665500058
keywords	Performative architecture; performance evaluation; taxonomy; parametric modeling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	10cc
id	10cc
authors	Alves, Gilfranco; Nojimoto, Cynthia
year	2011
title	Strings Pavilion: design process
source	V!RUS, [online] n. 6. [online] Available at: . [Accessed: 30 December 2011].
summary	The paper presents the design process of Strings Pavilion developed during the Architectural Association School of Architecture's Visiting School Workshop occurred in Sao Paulo city, in July, 2011. The pavilion is an outcome from a collective creation process of five persons team working in an immersive way during ten days; they explored several possibilities of experimentation and hybrid processes from researches about materials features and behaviors as well as parametric software. Fundamental concepts such as loop, feedback and responsivity from Second Order Cybernetic and Systems Theory were included and applied in the creation process.
keywords	design processes; Second Order Cybernetic; Complex Systems, parametric design; digital fabrication; interactivity.
series	other
type	normal paper
email
more	http://www.nomads.usp.br/virus/virus06/?sec=6&item=2&lang=en
last changed	2012/01/09 07:27

_id	sigradi2011_084
id	sigradi2011_084
authors	Alves, Gilfranco; Pratschke, Anja
year	2011
title	Mediação digital e revisão dos processos de design em Arquitetura [Digital mediation and review of design processes in Architecture]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 35-38
summary	This paper presents partial results of doctoral research entitled Architecture, Semiotics and Second Order Cybernetics: observation, representation and performance in design process. The research is linked to the Nomads.usp research group and proposes a review of design process, considering the mediation of digital media by using concepts of Second order Cybernetics. This work start with the hypothesis that in a contemporary context, professional demands of architects and designers requires a different approach in relation to the concept of emergence in architecture, and also describes an experiment during the AA Visiting School SP 2011, the Strings / Supple Pavilion project.
keywords	Design processes; digital media; emergence; performance.; Second-order Cybernetics
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: