Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2011_145
id	ecaade2011_145
authors	Araújo, Leandro; Andrés, Roberto
year	2011
title	BIM.BON . A BIM system for architectural practice in Brazil
doi	https://doi.org/10.52842/conf.ecaade.2011.439
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.439-443
summary	This article discusses the difficulties faced by the BIM (Building Information Modeling) systems to be widely adopted among most part of architecture and engineering professionals in Brazil. A revision of the issue and investigation of possibilities for improving the practice of architecture were made by creating a new model of BIM software addressed to a wider audience. It lists the main critical points in the usability of BIM software, based on a survey made with 300 professionals. The analysis is followed by a study of a new BIM software that could reach a wider audience of architects by implementing a tool that directly links the users to the construction materials market, also including a tool for easy budgetary calculations.
wos	WOS:000335665500050
keywords	BIM Software; Architectural design; Architecture in Brazil; ICT; Collaborative design
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ascaad2016_013
id	ascaad2016_013
authors	Belkis Öksüz, Elif
year	2016
title	Parametricism for Urban Aesthetics - A flawless order behind chaos or an over-design of complexity
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 105-112
summary	Over the last decade, paradigm shifts in the philosophy of space-time relations, the change from space-time to spatio-temporality, caused significant changes in the design field, and introduced new variations and discourses for parametric approaches in architecture. Among all the discourses, parametricism is likely the most spectacular one. The founder of parametricism, Patrik Schumacher (2009) describes it as “a new style,” which has “the superior capacity to articulate programmatic complexity;” and “aesthetically, it is the elegance of ordered complexity in the sense of seamless fluidity.” In its theoretical background, Schumacher (2011) affiliates this style with the philosophy of autopoiesis, the philosophy that stands between making and becoming. Additionally, parametricism concerns not only the physical geometry in making of form; but also discusses the relational and causal aspects in becoming of form. In other words, it brings the aesthetic qualities in making through the topological intelligence behind becoming. Regarding that, parametricism seems an effective way of managing /creating complex topologies in form-related issues. However, when it comes to practice, there are some challenging points of parametricism in large-scale design studies. Thus, this work underlines that the dominance of elegance for urban planning has the potential of limiting the flexible and dynamic topology of the urban context, and objectifying the whole complex urban form as an over-designed product. For an aesthetic inquiry into urban parametricism, this paper highlights the challenging issues behind the aesthetic premises of parametricism at the urban design scale. For that, Kartal Master Plan Design Proposal by Zaha Hadid Architects (2006) will be discussed as an exemplary work.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	acadiaregional2011_029
id	acadiaregional2011_029
authors	Bell, Brad; Kevin Patrick McClellan, Andrew Vrana
year	2011
title	Reconfiguring Collaboration by Computational Means Tex-Fab: A new model for collaborative engagement
doi	https://doi.org/10.52842/conf.acadia.2011.x.f7u
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
summary	TEX-FAB is a non-profit organization founded between three universities in Texas with the primary function of connecting design professionals, academics, and manufactures interested in digital fabrication. The three co-directors established TEX-FAB as a collective action, one that attempts to combine divergent interests and capabilities, for the purpose of strengthening the regional discourse around digital fabrication and parametric design. The three primary avenues for accomplishing this goal are set out as Theoria (Lectures / Exhibitions), Poiesis (Workshops) and Praxis (Competition). We see this type of effort as a new paradigm focused on providing a network of affiliated digital fabrication resources, and a platform for education/ exchange on issues of parametric modeling. It is our position that TEX-FAB engages the new and growing awareness of a regional and global hybridization. We seek to leverage the burgeoning global knowledge base to produce a more specific and contextual dialogue within the region we operate, teach, and practice.
series	ACADIA
last changed	2022/06/07 07:49

_id	sigradi2011_409
id	sigradi2011_409
authors	Bertoni, Griselda; De Monte, Andrea
year	2011
title	Mediaciones perceptivas. Desafíos en la incorporación de la tecnología como instrumento potenciador del proceso de aprendizaje en el TCG [Perceptual mediation. Challenges in incorporating technology as a tool enhacing the learning process in the TCG]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 472-475
summary	This work presents an introduction to current problems detected in the teaching and learning of perceptual and communication processes in front of the availability of disipositivos installed and digital media courses to students enrolled for Design and Architecture careers of our faculty. The same seeks to clarify a state of affairs to continue studies already carried out (Stipech 2004), (Bertero 2009), in relation to issues of representation in the design disciplines, while rehearsing possibilities updated theory and practice in the field of workshop.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p043
id	cf2011_p043
authors	Boeykens, Stefan
year	2011
title	Using 3D Design Software, BIM and Game Engines for Architectural Historical Reconstruction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 493-509.
summary	The use of digital tools has become a tremendous aid in the creation of digital, historical reconstructions of architectural projects. Regular visualization techniques have been used for quite some time and they still pose interesting approaches, such as following cinematic techniques [1]. While common visualizations focus on pre-rendered graphics, it is possible to apply Game Engines [2] for real-time architectural visualization, as witnessed by [3] and [4]. In the course of our teaching and research efforts, we have collected experience with several visualization and modeling techniques, including the use of gaming engines. While the modeling of qualitative geometry for use in regular visualization already poses an elaborate effort, the preparation of models for different uses is often not trivial. Most modeling systems only support the creation of models for a single amount of detail, whereas an optimized model for a real-time system will have fairly different constraints when compared to non-real-time models for photorealistic rendering and animation. The use of parametric methods is one usable approach to tackle this complexity, as illustrated in [4]. One of the major advantages of using parametric approaches lies precisely in the possibility of using a single model to generate different geometry with control over the amount of detail. We explicitly tackle this in a Building Information Modeling (BIM) context, as to support much more than purely 3D geometry and visualization purposes. An integrated approach allows the same model to be used for technical drawings in 2D and an optimized 3D model in varying levels of detail for different visualization purposes. However, while most Building Information Modeling applications are targeted to current architectural practice, they seldom provide sufficient content for the recreation of historical models. This thus requires an extensive library of parametric, custom objects to be used and re-used for historically accurate models, which can serve multiple purposes. Finally, the approach towards the historical resources also poses interpretation problems, which we tackled using a reasonably straightforward set up of an information database, collecting facts and accuracies. This helps in the visualization of color-coded 3D models, depicting the accuracy of the model, which is a valuable graphical approach to discuss and communicate information about the historical study in an appealing format. This article will present the results of different reconstruction case studies, using a variety of design applications and discuss the inherent complexity and limitations in the process of translating an active, evolving model into an environment suitable for use in a real-time system. Especially workflow issues are identified, as the translation of the model into the game engine should be repeated several times, when the model is further refined and adapted. This used to involve a large amount of repetitive work, but the current crop of game engines have much better approaches to manage the updating of the geometry.
keywords	Real-time architecture, game engines, cultural heritage, digital reconstruction, parametric modeling, Building Information Modeling
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2011_356
id	sigradi2011_356
authors	Bustos Lopez, Gabriela; González, Giscard; Rincón, Francisco
year	2011
title	Arquitectura Interactiva, reacción, comportamientos y transformaciones en el Programa de Diseño Digital [Interactive architecture, reaction, behaviors and transformations in the Digital Design Program]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 171-175
summary	This paper shows an academic strategy of production in the Interactive Architecture´s Mention of the Digital Design Diploma from the School of Architecture and Design at the University of Zulia, like weaves of reactions in the process of creation in the virtual space in 3D, and its establishment like interactive architectonic devices, jointly with a conceptual exposition that is based on the interactivity definition from the complex epistemology vision. It is the manifestation of an academic experience developed within the framework of both theoretical and practice exposition, based on the complex epistemology of the design with digital technology.
keywords	Architecture, interactivity; digital design; intelligent behaviors
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_121
id	sigradi2011_121
authors	Castral, Paulo Cesar; Tanoue Vizioli, Simone Helena
year	2011
title	O desenho à mão-livre mediado pelo tablet [The freehand drawing mediated by tablet]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 64-68
summary	This article discusses the redefinition of freehand drawing´s function in the design process, through digital media. This paper presents an experience for an interpretative analysis of drawing using tablets, by the students of Architecture and Urbanism of IAU - USP. It is a design exercise, emphasizing the draft phase. This empirical approach intends to be a pilot for the use of tablets in the perception´s process, suitable for architecture students as a reflection on the different cognitive dimensions that constitute the drawing practice and on its reinterpretation to reach new ideas.
keywords	Freehand drawing; sketches; tablets; design process
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cf2011_p165
id	cf2011_p165
authors	Chasznar, Andre
year	2011
title	Navigating Complex Models in Collaborative Work for (Sustainably) Integrated Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 619-636.
summary	Increasingly intensive use of computational techniques such as parametric-associative modeling, algorithmic design, performance simulations and generative design in architecture, engineering and construction are leading to increasingly large and complex 3D building models which in turn require increasingly powerful techniques in order to be manipulated and interpreted effectively. Further complexities are of course due also to the multi-disciplinary nature of building projects, in which there can be significant variation and even conflict among the aims of architects, engineers and builders, as well as owners, occupants and other stakeholders in the process. Effective use of model information depends to a large extent on sense-making, which can in some ways be helped but also hindered by schemes for organizing the information contained. Common techniques such as layering, labeling (aka ‚Äòtagging‚Äô) and assignment of various other attributes to model objects have significant limitations ‚Äì especially those arising from general problems of language, ontology and standardization, as well as but distinct from issues of interoperability ‚Äì both with respect to locating the desired items in a 3D building model and also with respect to displaying the objects in informative ways which effectively assist collaborative design and decision-making. Sustainable design in particular is an area generally requiring a high level of inter-disciplinary collaboration to achieve highly integrated designs which make multiple use of the elements and systems incorporated (though integrated design may also be pursued without explicit aims of sustainability). The proposed paper describes ongoing research concerning alternatives to the currently common techniques for locating and displaying information in 3D building models in support of sense-making to promote collaborative and integrated design. These alternatives comprise on the one hand interactive geometric-content-based methods for search and classification of model objects ‚Äì as an alternative or complement to common assigned-attribute-based methods ‚Äì and on the other hand visual analytic techniques ‚Äì in contrast to existing, relatively static tabular and "physical" views ‚Äì which can help to increase the informativeness of the geometric data within the model, as well as the non-geometric data that is attached to geometric objects (e.g. as in the cases of BIM and various types of CAE performance simulations). Tests undertaken with architects and engineers in practice and academia to evaluate the proposed methods are also described. Finally conclusions are drawn regarding these methods‚Äô positive present performance and some of their shortcomings, as well as indicating directions for future research concerning the methods‚Äô refinement and extension to help 3D building models become more effective components of the design process than they are at present, both with respect to these models‚Äô present levels of complexity and especially with respect to their anticipated increasing complexity in future.
keywords	CAD/CAE/BIM, content-based search, visual analytics
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2011_071
id	sigradi2011_071
authors	Chiarella, Mauro
year	2011
title	Pliegues despliegues y repliegues Didáctica proyectual e instrumentos de Ideación [Foldings, unfoldings and refoldings. Pedagogy for the project and instruments of ideation]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 27-30
summary	The international architecture of the last decades has examples of works and architectural projects presented graphic from the two-dimensional unfolding of three-dimensional folded surfaces. These valuable individual experiences have not represented generalized strategies that can be transferred to the professional practice and to architectural education. This article uses results of more than 10 workshops (with Unfolding and Folding methodologies) developed in Chile, Argentina and Brazil to build up a pedagogy for the project that makes it possible to investigate the spatial and material properties of folded compositions in Architecture. It proposes to review and update project instruments through the incorporation of Parametric Design; 3D origami software and Digital Manufacturing.
keywords	Folded compositions; pedagogy for the project; parametric design; digital manufacturing
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2011_423
id	sigradi2011_423
authors	Chiarella, Mauro; Dalla Costa, Matias
year	2011
title	Patrones Generativos Dinámicos (URDIR.Lab). Estrategias proyectuales paramétricas simples para el ejercicio profesional cotidiano [Dynamic Generative Patterns (URDIR.Lab). Simple Parametric Design Strategies for Everyday Practice]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 210-214
summary	The international architecture of the past decade adds parametric design to the project as a new variable dynamic strategy in the design process. Generative patterns meet a way of achieving parameterization from the computational geometry. The experimental developments of URDIR.Lab (FADU-UNL) group, ranges from: the current projective exercises with dynamic materials and forms to the development of simple formulas applied to everyday practice. The proposed challenge is to merge the local available technological resources - pre-industrial and industrial - with the ideation systems of post-industrial technologies.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	acadia11_234
id	acadia11_234
authors	Chok, Kermin
year	2011
title	Progressive Spheres of Innovation: Efficiency, communication and collaboration
doi	https://doi.org/10.52842/conf.acadia.2011.234
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 234-241
summary	Over the last few years, a large majority of construction work has moved overseas. In response to this, our engineering practice has been involved in a large number of Asian and Middle East design competitions, usually executed in a compressed timeframe. Building codes usually include very specific requirements regarding the lateral performance of a building under seismic and wind loads. This is especially true in China. Our structural engineering practice has thus developed a variety of digital tools customized to building code requirements, in order to provide relevant structural feedback in an appropriate design time frame. The paper will discuss our recent digital design work in the context of building code requirements and information sharing. Our innovations have centered on three progressive spheres of innovation: internal efficiency, communication and collaboration. We propose that only with closer and more transparent collaboration will the building industry be effective and efficient in meeting clients’ needs. However, without first addressing a firm’s internal capabilities of efficiency and communication, the firm will be unable to effectively participate in the collaborative process. This paper begins by discussing various custom Rhino-Grasshopper components to facilitate our internal design process. We then touch on the communication realm discussing work in lowering the barriers for information sharing. Lastly, we explore the necessary shifts in thinking required to move beyond linear design exploration and the exciting opportunity to deliver truly innovative design solutions.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	caadria2011_004
id	caadria2011_004
authors	Coorey, Benjamin P. and Julie R. Jupp
year	2011
title	Parametric modelling and design processes: Exploringsynthesis and evaluation using a Function-Behaviour-Structure perspective
doi	https://doi.org/10.52842/conf.caadria.2011.039
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 39-48
summary	In an attempt to extend our understanding of the design process in the context of computational parametric design tools, this paper explores the relationship between and interaction of synthesis and evaluation. In establishing the importance of their coupling in parametric design the paper then explores its consequence on the design process relative to existing models of designing. A tension between designing as planning, search and exploration in parametric design is highlighted together with a conceptual framework, which draws from a situated Function-Behaviour-Structure model of design. The purpose of the framework is to facilitate these different modes of designing and is targeted at the use of parametric tools.
keywords	Design processes; parametric design; evaluation; synthesis, design models
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_397
id	ecaadesigradi2019_397
authors	Cristie, Verina and Joyce, Sam Conrad
year	2019
title	'GHShot': a collaborative and distributed visual version control for Grasshopper parametric programming
doi	https://doi.org/10.52842/conf.ecaade.2019.3.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	When working with parametric models, architects typically focus on using rather structuring them (Woodbury, 2010). As a result, increasing design complexity typically means a convoluted parametric model, amplifying known problems: 'hard to understand, modify, share and reuse' (Smith 2007; Davis 2011). This practice is in contrast with conventional software-programming where programmers are known to meticulously document and structure their code with versioning tool. In this paper, we argue that versioning tools could help to manage parametric modelling complexity, as it has been showing with software counterparts. Four key features of version control: committing, differentiating, branching, and merging, and how they could be implemented in a parametric design practice are discussed. Initial user test sessions with 5 student designers using GHShot Grasshopper version control plugin (Cristie and Joyce 2018, 2017) revealed that the plugin is useful to record and overview design progression, share model, and provide a fallback mechanism.
keywords	Version Control; Parametric Design; Collaborative Design; Design Exploration
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	caadria2011_003
id	caadria2011_003
authors	Davis, Daniel; Jane Burry and Mark Burry
year	2011
title	The flexibility of logic programming : Parametrically regenerating the Sagrada Família
doi	https://doi.org/10.52842/conf.caadria.2011.029
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 29-38
summary	Flexibility is a major attribute of parametric modelling, however designers find it hard to maintain flexibility throughout their projects. One cause may be the programming paradigm of the parametric model. Currently this is dataflow programming, which makes it easy to create and flex parameters, but difficult to modify relationships. This paper investigates the implications of changing the programming paradigm in a parametric model to logic programming. A qualitative account is given of using dataflow programming and logic programming to generate a portion of the Sagrada Família church. It finds logic programming adept at translating explicit models into parametric models, but lacking continuous flexibility. This research demonstrates there are different types of flexibility within the model and architects can privilege certain flexibility types by selecting the programming paradigm of the model.
keywords	Logic programming; parametric modelling; end user programming; practice based research
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia11_316
id	acadia11_316
authors	d’Estree Sterk, Tristan
year	2011
title	Using Robotic Technologies to Integrate External Influences in Design
doi	https://doi.org/10.52842/conf.acadia.2011.316
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 316-317
summary	Designers have always assembled materials to form purposeful connections between ideas and spaces, uniting the height of human thought with the great ability of people to shape the world with their hands and tools. People have understood this opportunity and used it to inform the material investments that they make in buildings.When reflecting upon the past ten or so years of practice it is clear that some methodologies have matured. Professionals, academics and students have found new ways to connect thinking and doing. These connections have a different flavor and tend to feel more analytical to those once used. Previously internalized decisions are being made increasingly explicit by a generation of designers that has found a more meaningful overlap between the theories and procedures of design. The methods they use are visual, analytical, as well as intuitive, and encompassed within a whole gamut of tools such as Grasshopper, Ecotect, Digital Project and Generative Components. All of these tools provide opportunities for designers to inquisitively explore alternative formal, spatial and environmental relationships. The opportunities that are brought by increasing externalization are important. Design is at once turning away from its focus on the end result, be it a building or an interior, and toward a renewed interest in the design process itself. Brought about by encapsulating design principles into self-made tools, this shift has enabled families of formal outcomes rather than singular instances of ‘pure’ architecture. These multiple, equally valid, formal outcomes disrupt more traditional measures of formal legitimacy and help move architects toward more relational understandings of space, time and environment.
series	ACADIA
type	moderator overview
email
last changed	2022/06/07 07:55

_id	caadria2011_069
id	caadria2011_069
authors	Fernando, Ruwan; James Steel and Robin Drogemuller
year	2011
title	Using domain specific languages in the Building Information Modelling workflow
doi	https://doi.org/10.52842/conf.caadria.2011.731
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 731-740
summary	The design of architecture, in practice, entails the collaboration of many disciplines each with their own set of tools and representations. Building Information Models aim to support interoperability between these disciplines. However current implementations require a lot of manual work involving translating parts from the various specialised descriptions to the common model format. Domain Specific Languages are a development from Information Technology that defines a mapping from the concepts used in one discipline to those used in another. In this paper, a workflow incorporating the movement between specialised languages and a central model is described. The central model is structured using the Industrial Foundation Classes (IFC). The motivation for elaborating on the interdisciplinary workflow is the desire to create a more iterative process without the need for the manual recreation of models. While it is difficult to have a description or language that contains all the information of all the disciplines, this research demonstrates how the IFC schema acts as a pivot not just between data sets, but also between concepts expressed in different representations thus giving from analysis to design.
keywords	Building Information Model; BIM; domain-specific languages; lighting; spatial planning; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2011_150
id	ecaade2011_150
authors	Fioravanti, Antonio; Loffreda, Gianluigi; Trento, Armando
year	2011
title	Computing Ontologies to Support AEC Collaborative Design: Towards a Building Organism delicate concept
doi	https://doi.org/10.52842/conf.ecaade.2011.177
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.177-186
summary	To help architects in real life work it is needed to clarify what a building is from their point of view. Till now we have seen that building design aid programs are mainly conceived from an “external” perspective, that of computer scientists. Difficulties related to architectural design support programs result from: an insufficient overall model of the building; an inadequate formalization of information; an underestimated complexity inherent in the design process. To overcome these difficulties we introduce a ‘systemic’ building model that takes into account discipline-specific goals by means of relation structures to relate entities of domains and ontologies to formalize knowledge.
wos	WOS:000335665500020
keywords	Design architecture; building organism; ontologies; collaborative design; situated design
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2013_043
id	caadria2013_043
authors	Freitas, Márcia Regina de and Regina Coeli Ruschel
year	2013
title	What is Happening to Virtual and Augmented Reality Applied to Architecture?
doi	https://doi.org/10.52842/conf.caadria.2013.407
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 407-416
summary	This paper presents the results of a comprehensive survey of activities on research and development of Virtual and Augmented Reality applied to architecture. 200 papers were reviewed, taken from annual conferences of the Association for Computer Aided Design In Architecture (ACADIA) and its sibling organizations in Europe (ECAADE and CAAD Futures), Asia (CAADRIA), the Middle East (ASCAAD) and South America (SIGRADI). The papers were grouped in research areas (design method, architectural theory and history, performance evaluation, human interaction, representation and process & management), emphasis (education, application, collaboration, visualization, practice and theory) and technology development stage (specification, development, application demonstration and evaluation). The period of study comprises 11 years, from 2000 to 2011. Findings for each category are described and key publications and authors are identified.
wos	WOS:000351496100040
keywords	Virtual reality, Augmented reality, Study of activity
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: