Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 156

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_144
id	ecaade2011_144
authors	Kunze, Antje; Halatsch, Jan; Vanegas, Carlos; Jacobi, Martina Maldaner
year	2011
title	A Conceptual Participatory Design Framework for Urban Planning: The case study workshop ‘World Cup 2014 Urban Scenarios’, Porto Alegre, Brazil
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.895-903
doi	https://doi.org/10.52842/conf.ecaade.2011.895
wos	WOS:000335665500103
summary	This paper focuses on the definition of a conceptual participatory design framework for urban planning. Traditional planning methods can no longer satisfy the growing demands on sustainable urban planning in regard to factors such as complexity, problem size, and level of detail and these limitations make the development of new approaches necessary. Expert knowledge as well as insights from stakeholders and community members needs to take part equally in the decision-making process since they are responsible for a broad understanding and acceptance of final planning decisions. Therefore, a participatory framework is presented in the following, which integrates needs and requirements of stakeholders. In order to enable diverse groups of stakeholders to act conjointly, we propose the application of interactive decision support tools, which will leverage general conclusions especially to solve crucial zplanning decisions.
keywords	Decision-making process; stakeholder participation; shape grammars; procedural model; urban planning
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2023_108
id	sigradi2023_108
authors	Passos, Aderson, Jorge, Luna, Cavalcante, Ana, Sampaio, Hugo, Moreira, Eugenio and Cardoso, Daniel
year	2023
title	Urban Morphology and Solar Incidence in Public Spaces - an Exploratory Correlation Analysis Through a CIM System
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1655–1666
summary	The walkability of open spaces has been highlighted in current discussions about the production of designed environments in urban contexts (Matan, 2011). To contribute to this theme, this work selects the environmental comfort of open spaces as its element of study. The production of urban space was investigated, specifically in regard to urban morphology, understanding that city design directly influences environmental comfort (Jacobs, 1996). This work addresses the geographic context of low latitudes, specifically in hot and humid climate zones of Brazil, and, in this context, according to NBR 15220 (national performance standards), shading is one of the main comfort strategies, so solar incidence was the approached environmental phenomenon. Thus, this work presents a digital system that performs exploratory analysis on the correlations between urban form indicators and environmental performance indicators, specifically solar incidence. The method consists of three steps: urban form modeling (1), indicator measurement (2) and correlation analysis (3). In the first stage, different spatial sections of a city in Brazil were represented in the digital environment (1). This work’s implementation instrument is based on a City Information Modeling framework (Beirao et al., 2012). Visual Programming Interface (VPI) and Geographic Information Systems (GIS) tools were used, in addition to a Relational Database Management System (RDBMS). Then, for each urban clipping, the values of morphological indicators and the incidence of solar radiation were measured (2). Based on the values of the indicators, an exploration of their correlation was carried out by statistical methods (3). The results of the correlation analysis and their correspondent scatter plots are presented. Finally, possible applications of the results for the creation of prescriptive urban planning systems are discussed, seeking to promote a sustainable urban environment.
keywords	Urban planning, Environmental comfort, Walkability, Urban morphology, Statistical methods.
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	ecaade2011_115
id	ecaade2011_115
authors	Nováková, Katerina; Achten, Henri; Matejovská; Dana
year	2011
title	Towards Improved Architecture Education: A Research Framework
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.63-69
doi	https://doi.org/10.52842/conf.ecaade.2011.063
wos	WOS:000335665500006
summary	In this paper we report on a PhD research project that has just started. The main question of the research deals with improvement of architectural education, and we are concerned in particular on the influence of CAD. First we outline the basic assumptions and major considerations of the research, following we describe the research methodology, and show the principal direction of the work. Some work has already been done, and the paper ends with a few tentative “educated guesses” what the possible outcomes of the work may be.
keywords	Education; Pedagogy; Collaborative Design; Sketching
series	eCAADe
type	normal paper
email
last changed	2022/05/01 23:21

_id	ecaade2011_034
id	ecaade2011_034
authors	Schirmer, Patrick; Kawagishi, Noboru
year	2011
title	Using shape grammars as a rule based approach in urban planning - a report on practice
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.116-124
doi	https://doi.org/10.52842/conf.ecaade.2011.116
wos	WOS:000335665500013
summary	With the development of user friendly software, using procedural shape grammars has become productive for urban planning projects. Little about the experience of their use by architects and urban planning agencies has been reported yet. This paper will thus discuss the experience gained with the use of shape grammars in the projects of KCAP. We will show how the different scales of urban planning and urban design can be handled and how design concepts can be integrated into the procedural “pipeline” using the software “CityEngine”. We will also present an approach of “typological testing” that allows to test various design concepts for their possible developments. This work is the base for current research at ETH, integrating geometric aspects into behavioural simulation processes of urban simulation.
keywords	Shape grammars; Urban planning; Urban Simulation; Urban Typologies
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ijac20109104
id	ijac20109104
authors	Schoch, Martin; Chakguy Prakasvudhisarn, Apichat Praditsmanont
year	2011
title	Building-Volume Designs with Optimal Life-Cycle Costs
source	International Journal of Architectural Computing vol. 9 - no. 1, 55-76
summary	This report provides a detailed overview of the building-volume optimization (BVO) model. It allows for insights into elements that comprise the BVO model, describes its setup as an optimization tool for design and tests its possibilities through exemplary runs. It includes the description of all life-cycle cost (LCC) members involved and explains the implemented optimization process approach. It also provides a perspective regarding the sensitivity and consequences of the BVO model. Serving as decision-support for designers the model qualifies as a practice-oriented application during the early design stage. Test results indicate that LCC considerations can significantly affect building-volume designs during this stage. Therefore, the introduction of cost objectives to the building-volume design represents a valuable approach. Enabling for their inclusion, design issues referring to estimated building performances, are capable of improvement before design finalization. Especially comparisons between initial and operational costs imply that, with increasing life-cycle periods, the impact of operational costs on shaping building-volume design is continuously growing.
series	journal
last changed	2019/05/24 09:55

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	ijac20109301
id	ijac20109301
authors	Biloria, Nimish
year	2011
title	InfoMatters, a multi-agent systems approach for generating performative architectural formations
source	International Journal of Architectural Computing vol. 9 - no. 3, 205-222
summary	The research paper exemplifies upon a computationally intensive inter-disciplinary research driven design investigation into spatializing the relationship between digital information and physical matter. Focusing on the development of architectural scale urban inserts, the design-research work operates on the intersection of information technology, environmental design, architecture, and computer aided manufacturing domains.The research framework revolves around developing a seamless integration of the aforementioned disciplines in order to establish iterative simulation driven methodologies for generating bottom-up sustainable architectural formations. This is achieved by establishing parametrically driven relational linkages between differential data sets (environmental, social, topological, material etc), which formulate the context (both global and local) within which the proposed project has to be designed. A selforganizing multi-agent system based simulation methodology for generating resultant spatial formations, in time, based on the impacts of the parametric relationships between the aforementioned data sets is eventually embarked upon. This implies, understanding the site as a dynamic information field within which interdependent ecology of agents (representing typology of people, program, structure, speed, desired social interaction etc) with multi-level relational affinities amongst each other as well as the dynamic urban information field. The resultant self-organized multi-agent formations are iteratively mined for identifying logical three-dimensional structural patterns or subjected to programmatic and environmental need driven additional layer of structural simulation with pre-embedded material restraints. An optimized system of multi-performative components that not only populates but also serves as an integrated structural + skin system of the results obtained from the agent based simulations (based upon the degree of inclusion/exclusion of parameters such as the amount of light, sound, wind etc) is subsequently generated. These experimental projects attained the status of self-evolving ecologies of multi-dimensional agents with embodied behavioural profiles, thus providing engaged, highly interdependent design by simulation outputs. The outputs showcase a dynamic system's driven approach towards sustainable design by stressing upon the idea of cohesively binding information and material systems from the very beginning of the design process. Such approaches help in reducing post-optimization of built form and consequently allow for rational understanding of performance criteria and its impact on formal articulations throughout the design process.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2011_157
id	sigradi2011_157
authors	Burneo Valdivieso, Xavier Eduardo
year	2011
title	No es esto lo que hacen los arquitectos? Experiencias y aplicaciones de herramientas digitales en los talleres de diseño [Is not this what architects do? Experiences and applications of digital tools in design workshops]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 82-85
summary	This paper shows under the framework of research and teaching project developed at the Technical University of Loja, Ecuador, with the participation of students in the school of architecture, taking aim through the study of theory and a series exercises to strengthen the relationship between the methods of generative design and digital technologies in architectural projects from creation to completion display, to achieve better teaching and learning as the architect insert specific language in society and contemporary architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadiaregional2011_009
id	acadiaregional2011_009
authors	Esquivel, Gabriel; Ryan Collier
year	2011
title	A Swell Project: Between Parametrics and Fabrication
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.r0r
summary	As a case study, Swell serves as: 1) an investigation into architectural ornamentation using a contemporary framework, as directed through specific modes of research, 2) a study in fabrication materials and methods, especially through the realization of form, and 3) as a pedagogical tool, loosely assembled through real and virtual space. This essay will focus mainly on the fabrication methods in terms of why and the pedagogical research initiatives and reactions that went into the design of Swell. The project was conceived through a summer studio which was formed to investigate tools and methods available at the Texas A&M Architecture Ranch and to further the local pedagogical direction toward fabrication in architectural design at Texas A&M University as a whole. That is to say, there was no specific agenda toward parametrics, form, research, technology, or the like. At the same time, as the research continued, certain decisions were cast in terms of technology, sensibility, site, etc. informed by research, iterative processes, or parametric evaluation that ultimately formed the project as it exists today.
series	ACADIA
last changed	2022/06/07 07:49

_id	ijac20109103
id	ijac20109103
authors	Jun Chung, Daniel Hii; Malone-Lee Lai Choo
year	2011
title	Computational Fluid Dynamics for Urban Design: The Prospects for Greater Integration
source	International Journal of Architectural Computing vol. 9 - no. 1, 33-54
summary	Computational Fluid Dynamics (CFD) has always been used in the field of architecture, urban design and urban planning to understand the patterns of wind flow through the built environment. Its analysis is important to evaluate whether the natural ventilation through a site is adequate to mitigate heat and pollutant to achieve better human comfort in dense urban environments. However, given the complex operational requirements, the response to wind flow is not always done early enough to support planning and design. This paper seeks to illustrate how CFD analysis can aid planning and design of urban areas and investigates the workflow requirements, in the hope of making the CFD simulations more accessible to the practices and contribute to design decisions. It also looks at the present technological advancements and future prospects to assess the scenarios where emerging technologies can make CFD simulation more readily available with affordable and even mobile hardware installations.
series	journal
last changed	2019/05/24 09:55

_id	ijac20109306
id	ijac20109306
authors	Peng, Chengzhi
year	2011
title	uCampus: Can an open source 3D interactive virtual campus modelling platform support institutional learning and innovation?
source	International Journal of Architectural Computing vol. 9 - no. 3, 303-324
summary	This paper reports and reflects on the key findings from the UK JISC funded weCAMP-uCampus project undertaken at the University of Sheffield in which a Web-based 3D interactive campus visualization modelling platform was developed and deployed using the latest Java and XML-based open source technologies. The project evolved rapidly along three strands of development on software design, content generation, and user/stakeholder engagement. One of the key outcomes is a novel approach to visualising large complex datasets in conjunction with multi-scale and multi-layered 3D campus modelling. To test the adaptability of uCampus, the Augustine House Experiment was later carried out in collaboration with the iBorrow project based at the Canterbury Christ Church University campus. The question on the prospect of uCampus to support learning and innovation at an institutional level is discussed by revisiting the earlier works of the Oregon Experiment and the Seeding-Reseeding Meta-Design Framework.
series	journal
last changed	2019/05/24 09:55

_id	ijac20119402
id	ijac20119402
authors	Toth, Bianca; Flora Salim, Jane Burry, John Frazer, Robin Drogemuller and Mark Burry
year	2011
title	Energy-Oriented Design Tools for Collaboration in the Cloud
source	International Journal of Architectural Computing vol. 9 - no. 4, 339-359
summary	Emerging from the challenge to reduce energy consumption in buildings is the need for energy simulation to be used more effectively to support integrated decision making in early design.As a critical response to a Green Star case study, we present DEEPA, a parametric modeling framework that enables architects and engineers to work at the same semantic level to generate shared models for energy simulation.A cloud-based toolkit provides web and data services for parametric design software that automate the process of simulating and tracking design alternatives, by linking building geometry more directly to analysis inputs. Data, semantics, models and simulation results can be shared on the fly.This allows the complex relationships between architecture, building services and energy consumption to be explored in an integrated manner, and decisions to be made collaboratively.
series	journal
last changed	2019/07/30 10:55

_id	cf2011_p011
id	cf2011_p011
authors	Verdonck, Evelien; Lieve Weytjens, Verbeeck Griet, Froyen Hubert
year	2011
title	Design Support Tools in Practice. The Architects' Perspective
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 769-784.
summary	In recent years, a large number of design support tools (DSTs) have been developed to address the ever increasing complexity and fragmentation of the architectural design process. Despite the omnipresence and the wide variety of DSTs available to architects today, literature reveals that there is still a mismatch between existing tools and design practice. Further examination of this discrepancy might reveal possible strategies for the improvement of tools. Therefore, this study investigates the Flemish architectural practice directly through a large-scale survey including 629 architects (nearly 10% of the population). The survey was based on a practice-oriented conceptual framework, which was developed as a theoretical background for this study. First the nature of the design process was explored through extensive literature review. In addition to this, a study of tools and possible classifications was carried out. Although numerous studies are available that provide a possible classification, most focus on specific design aspects, for instance sustainability or user-centered design. However, there is no general outline of tools available that would be adequate for the purpose of this research. The DSTs included in this study range from sketches and checklists to 3D CAD and simulation software, in other words any instrument intended to support one or more aspects of the design process. The findings from both literature studies were synthesized in the conceptual framework. This framework presents the design process as a linear process, consisting of the conceptual design phase, the preliminary design phase, the building permission phase, and the construction phase. Six categories of tools were defined, according to the roles they play in the design process, namely knowledge-based, presentation, evaluation/analysis, structuring, modeling, and communication. A tool can belong to one or more categories. The mapping of these roles on the design process resulted in the final framework, which was then used as a base for the questionnaire. The survey aimed at gaining insight into the different DSTs and their corresponding roles, as well as the design phases in which they are used or most needed by Flemish architects in architectural practice. In addition to this, the survey contained questions about the influence of tools on design decision-making, and the specific characteristics and qualities the designers prefer for design support tools. A final part of the survey asked about general background information, such as the respondents‚Äô age, size of architectural firm and types of projects usually undertaken. The results of the survey reveal that there are distinctly different needs for each of the roles defined, as well as a specific frequency of use within each design phase. Furthermore, the most popular tools often encompass multiple roles. Additionally, clear expectations for future tools are defined. Finally, the data collected show researchers and tool developers what kind of support designers need in the different stages of the design process, and may help them to develop DSTs accordingly, to maximize their usability and eventually contribute to decrease the gap between tools and practice.
keywords	design tools, architectural design process, survey
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20109302
id	ijac20109302
authors	Williams, Nicholas; Hanno Stehling, Fabian Scheurer, Silvan Oesterle, Matthias Kohler, Fabio Gramazio
year	2011
title	A Case Study of a Collaborative Digital Workflow in the Design and Production of Formwork for ‘Non-Standard’ Concrete Structures
source	International Journal of Architectural Computing vol. 9 - no. 3, 223-240
summary	This paper presents an overview of ongoing research from within the Tailorcrete research project into the development of CAD tools for the design and realization of ‘non-standard’ concrete structures. The focus is on concrete formwork, a significant factor affecting cost, logistics and aesthetics. With a process spanning a broad range of expertise, collaboration through an effective digital workflow is vital to the successful execution of such structures. As a concept for this workflow, a working model of a Design System is described and its development discussed. This focuses on three aspects: (1) the identification of key Use-Cases; (2) the definition of Formwork Systems; and (3) the definition of communication between software elements to provide relevant means of collaboration for expert users. An implementation as a package of software prototypes is also briefly presented. This includes a Base Framework, tools targeting Use-Cases and components relating to specific formwork systems.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_113
id	ecaade2012_113
authors	Jutraz, Anja ; Zupancic, Tadeja
year	2012
title	Digital system of tools for public participation and education in urban design: Exploring 3D ICC
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 383-392
doi	https://doi.org/10.52842/conf.ecaade.2012.1.383
wos	WOS:000330322400039
summary	This article is a starting point for the development of experiential urban co-design interfaces to enhance public participation in local urban projects and to be also used as a communication and collaboration tool in urban design. It is based on the previous research involving 3D city models utilized as understandable design interfaces for the non-technical public (Jutraz, Zupancic, 2011), where we have already explored different views (pedestrian, intermediate and bird’s-eye view), as well as the means by which the information obtained from these different views may be combined by shifting between viewpoints. Previous work was conducted in the “street lab” as well as the Urban Experimental Lab, which was developed specifi cally for the public’s participation in urban planning (Voigt, Kieferle, Wössner, 2009). Presented in this article is the next step that explores the immersive collaboration environment 3D ICC [1], formerly known as Teleplace. The environment was developed for effi cient collaboration and remote communication and shifts the research focus towards questions regarding how to employ both labs as interfaces between the non-technical public and design professionals. As we are facing the lack of digital systems for public participation and education in urban design, different digital tools for communication and collaboration should be combined into a new holistic platform for design. A digital system of tools needs to be developed that supports the urban design decision-making process and focuses on improved final solutions and increased satisfaction amongst all participants. In this article the system of digital tools for public participation, which include communication, collaboration and education, will be also defi ned, with its basic characteristics and its elements.
keywords	Digital system of tools; collaboration; 3D model; public participation; urban design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2011_072
id	sigradi2011_072
authors	Parra-Agudelo, Leonardo
year	2011
title	Interaction Design for Bogota: civil participation and public space construction [Interaction Design for Bogota: civil participation and public space construction]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 335-338
summary	The ubiquity of digitally enhanced objects has made our social and cultural experiences to be mediated by electronic and digital products, and the vast and mostly invisible layer of technology that is being deployed in Bogota, Colombia, will have a substantial impact in our local public space. Design disciplines have the responsibility to actively engage and address problems and opportunities created by new technology developments. This paper will focus on the theoretical framework and research approach, to provide foundations for local upcoming research projects dealing with public space and digital technologies.
keywords	Public space; urban informatics; interaction design; action research; design research
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	sigradi2011_238
id	sigradi2011_238
authors	Spencer, Herbert; Spitz, Rejane
year	2011
title	MediaFranca: Rediseñando el Modelo Democrático [MediaFranca: Redesigning the Democratic Model]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 363-367
summary	Citizen engagement in public affairs is at the core of a healthy democracy. Nonetheless we must recognize that this is not often the case, and when it occurs it may not always be inclusive, coherent or constructive. While various digital services and social networks have created a new mode of public conversation, they have proved to be insufficient. The problem of democracy is way beyond the reach of an individual service or platform if we don't agree in a general framework for a digital open-mesh for democracy. As we identify the necessity for a new mode of participation, we examine socialinteraction patterns for public deliberation and collaboration for presenting a general design framework for e-government structured around user-experience and social co-experience.
keywords	e-democracy; e-government; social software; interaction design; metadesign
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2021_231
id	caadria2021_231
authors	Wong, Kwan Ki Calvin and van Ameijde, Jeroen
year	2021
title	In-Between Spaces: Data-driven Analysis and Generative Design for Public Housing Estate Layouts
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 397-406
doi	https://doi.org/10.52842/conf.caadria.2021.2.397
summary	As Hong Kong constructs increasingly high-density, high-rise public housing estates to increase land use efficiency, public in-between spaces are more constrained, which impacts the quality of social relations, movements and daily practices of residents (Shelton et al. 2011; Tang et al. 2019). Current planning practices are focused on the achievement of quantitative performance measures, rather than qualitative design considerations that support residents experiences and community interaction. This paper presents a new methodology that combines urban analysis and generative design for the regeneration of social housing estates, based on the spatial and social qualities of their in-between spaces.
keywords	Social Housing; Public Open Space; Generative Design; Urban Planning
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	eaea2009_schneider_petzold
id	eaea2009_schneider_petzold
authors	Schneider, Sven; Frank Petzold
year	2011
title	Digital & Analogue – Seamlessly Integrating Freehand-Sketching in a Digital Design Environment
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 135-146
summary	In last decade the computer has turned from a simple “drawing machine” into a broad “design medium”. Digital tools offer possibilities for simulation, analysis or research. Using these tools in addition to the creative process new synergies can arise in dialog with the computer. Nevertheless, this potential is currently not exhausted. Reasons for this dilemma originate to large parts from the complicatedness of the programs which prevent a creative usage with the arising possibilities the complex digital design brings along with. To guarantee a smooth dialog between the computer and the designer and between distributed working design teams, we are investigating in the conception of an ideal computer-based design environment (ICBDE). Therefore we developed a prototypical design platform, where we try to consider the peculiarities of the design process in an integrated “digital chain”. Core concept of this ideal-framework is the seamless coupling of digital design tools to permit a back-coupling work in a comprehensive design environment. In this context the paper outlines sketching as one part of this ICBDE. Freehand-sketching is still one of the most important design tools. It is used in all phases of the design process and helps to turn the invisible thoughts fast and intuitively into workable artifacts. In contrast to the precise virtual models, the vagueness of sketches helps the designer to remain flexible in his decision- making and to keep the orientation in complex design tasks.
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	cf2011_p012
id	cf2011_p012
authors	Chen, Liang; Ng Edward
year	2011
title	PedNaTAS: An Integrated Multi-Agent Based Pedestrian Thermal Comfort Assessment System
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 735-750.
summary	Pedestrian’s thermal comfort is of great importance in urban planning. To develop effective planning standards that prompt pedestrian comfort, a comprehensive assessment framework that takes into account pedestrian’s individual perception and behavioral is in great need. Computer simulation tools in this respect are still sparse. This paper presents the PedNaTAS system, an agent-based integrated decision support system that assesses pedestrian thermal comfort from bottom-up.
keywords	thermal comfort, pedestrian simulation, multi-agent based modeling, geographical information system, Repast
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: