Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 451

Reformat results as: short short into frame detailed detailed into frame

_id	acadia11_18
id	acadia11_18
authors	Cheng, Nancy Yen-wen
year	2011
title	Forewords: The Need for Nimble Thinking
doi	https://doi.org/10.52842/conf.acadia.2011.018
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 18-19
summary	The digital age demands fluid movement between different modes of thought. At its foundation, research requires patient study, what Malcolm Gladwell1 describes as the expertise that comes from practicing one thing for 10,000 hours. Careful observation and reflection yield the small insights that lead to bigger discoveries. Through experimenting, designers learn how to do things in an intuitive way, developing a deep tacit knowledge of actions that is hard to express in words.
series	ACADIA
type	introduction
email
last changed	2022/06/07 07:55

_id	acadia11_234
id	acadia11_234
authors	Chok, Kermin
year	2011
title	Progressive Spheres of Innovation: Efficiency, communication and collaboration
doi	https://doi.org/10.52842/conf.acadia.2011.234
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 234-241
summary	Over the last few years, a large majority of construction work has moved overseas. In response to this, our engineering practice has been involved in a large number of Asian and Middle East design competitions, usually executed in a compressed timeframe. Building codes usually include very specific requirements regarding the lateral performance of a building under seismic and wind loads. This is especially true in China. Our structural engineering practice has thus developed a variety of digital tools customized to building code requirements, in order to provide relevant structural feedback in an appropriate design time frame. The paper will discuss our recent digital design work in the context of building code requirements and information sharing. Our innovations have centered on three progressive spheres of innovation: internal efficiency, communication and collaboration. We propose that only with closer and more transparent collaboration will the building industry be effective and efficient in meeting clients’ needs. However, without first addressing a firm’s internal capabilities of efficiency and communication, the firm will be unable to effectively participate in the collaborative process. This paper begins by discussing various custom Rhino-Grasshopper components to facilitate our internal design process. We then touch on the communication realm discussing work in lowering the barriers for information sharing. Lastly, we explore the necessary shifts in thinking required to move beyond linear design exploration and the exciting opportunity to deliver truly innovative design solutions.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia11_316
id	acadia11_316
authors	d’Estree Sterk, Tristan
year	2011
title	Using Robotic Technologies to Integrate External Influences in Design
doi	https://doi.org/10.52842/conf.acadia.2011.316
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 316-317
summary	Designers have always assembled materials to form purposeful connections between ideas and spaces, uniting the height of human thought with the great ability of people to shape the world with their hands and tools. People have understood this opportunity and used it to inform the material investments that they make in buildings.When reflecting upon the past ten or so years of practice it is clear that some methodologies have matured. Professionals, academics and students have found new ways to connect thinking and doing. These connections have a different flavor and tend to feel more analytical to those once used. Previously internalized decisions are being made increasingly explicit by a generation of designers that has found a more meaningful overlap between the theories and procedures of design. The methods they use are visual, analytical, as well as intuitive, and encompassed within a whole gamut of tools such as Grasshopper, Ecotect, Digital Project and Generative Components. All of these tools provide opportunities for designers to inquisitively explore alternative formal, spatial and environmental relationships. The opportunities that are brought by increasing externalization are important. Design is at once turning away from its focus on the end result, be it a building or an interior, and toward a renewed interest in the design process itself. Brought about by encapsulating design principles into self-made tools, this shift has enabled families of formal outcomes rather than singular instances of ‘pure’ architecture. These multiple, equally valid, formal outcomes disrupt more traditional measures of formal legitimacy and help move architects toward more relational understandings of space, time and environment.
series	ACADIA
type	moderator overview
email
last changed	2022/06/07 07:55

_id	ecaade2011_052
id	ecaade2011_052
authors	Hamadah, Qutaibah
year	2011
title	The Polymorphic Diagram
doi	https://doi.org/10.52842/conf.ecaade.2011.318
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.318-324
summary	Thinking about space and its conception lies at the very essence of architectural design, yet only limited attention has been afforded towards developing and advancing its medium of conception. With the objective of better understanding and shaping spatial design workflows, the study sets its attention on what is widely embraced as the medium of thinking about space and its conception in architectural design: The diagram. The study begins with examining the cognitive affordances of the diagram in architecture design, discusses its limitation, then propose a computational-augmented concept for a new class of diagrams, the polymorphic diagram, to assist spatial thinking and cognition during the conceptual design phase.
wos	WOS:000335665500036
keywords	Design; Diagram; Spatial Thinking, Design Cognition; Computation
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_112
id	acadia11_112
authors	Klinger, Kevin
year	2011
title	Informing Design through Production Formulations
doi	https://doi.org/10.52842/conf.acadia.2011.112
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 112-113
summary	Over the decade of the aughts, architectural discourse has charted a new course, and in the wake of the digital effect on mainstream architectural thinking, we find ourselves in a great age of exploration. Research in digital fabrication has moved from the general to the specific, in that it aims to focus efforts related to technological impact on particular cases and variable parameters which contribute to even larger ideas, such as manufacturing, the social impact, sustainable practices, etc. Specific work on building components, coupled with a pragmatic rigor about durability, strength, and production have provided concrete examples of work that spin out of these design-through-production investigations. To be certain, each new design-through-production project explores unique territory and contributes to the knowledge map by adding to a matrix of possible applications. Still, we align our work with the age-old discipline of architectural thinking, while privileging “Making, Materials, Performance, Form, and Function.” Indeed, form is informed by performance! The principles that govern the human decision-making, in light of this new kind of digitally generated work have yet to be clearly articulated, but techniques and methods have expanded to create new opportunities for making architecture. In fact, research has tended to be less about framing the new principles for making digital architecture and more about adding specific cases to the knowledge base, as each new project helps to define the collective body.
series	ACADIA
type	moderator overview
email
last changed	2022/06/07 07:51

_id	acadia11_362
id	acadia11_362
authors	Mathew, Anijo
year	2011
title	Interactive Placemaking: Three Critical Enquiries into Urban Interactions in Place
doi	https://doi.org/10.52842/conf.acadia.2011.362
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 362-371
summary	Project for Public Spaces (Project for Public Spaces) defines placemaking as a process that fosters the creation of vital public destinations: the kind of places where people feel a strong stake in their communities and a commitment to making things better. This paper uses 3 design implementations to argue that architects and designers must reconstruct these ideas of placemaking in the evolving social, cultural, economic and technological context of our time. The projects are used as critical enquiries to explore how designers can integrate current social-economic and cultural thinking from design, business, and computing and show how evolving interactive connected technologies can lead to new ways of constructing located and connected place.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia11_326
id	acadia11_326
authors	Velikov, Kathy; Thün, Geoffrey; O’Malley, Mary; Ripley, Colin
year	2011
title	Toward Responsive Atmospheres: Prototype Exploration through Material and Computational Systems
doi	https://doi.org/10.52842/conf.acadia.2011.326
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 326-333
summary	The Stratus Project is an ongoing body of design research investigating the potential for kinetic, sensing and environment-responsive interior envelope systems. The research emerges from a consideration of our attunement to the soft systems of architecture – light, thermal gradients, air quality and noise – paired with a desire to develop and prototype envelopes that not only perform to affect these atmospheres, but also to promote continual information and material exchange, and eventually dialogue, between occupant and atmosphere. Stratus v1.0 included the construction of a modest prototype using simple open source technologies, aimed to explore the formal, operational and technological possibilities, as well as potential operability and control conflicts, as part of the first phase of thinking around these questions. It deploys a distributed approach to structural, mechanical and communications systems design and delivery, where localized response is prioritized. The project works to reclaim the environmentally performative elements of architecture – in this case, specifically, interior mechanical delivery and interface systems – to within the purview of the discipline, as territories of material, formal, technological and experiential innovation and exploration. This paper will describe both the development of the current prototype as well as future research and investigation trajectories. The Stratus Project begins by situating itself at the crossroads of the disciplinary territories of architecture, technology, environmental control and cybernetics. Through the use of computational technologies and in collaboration with researchers in the fields of computer science, mechanical engineering and materials science, this project aims to advance the development of responsive environmental design and performative building skins.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2011_099
id	ecaade2011_099
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems
doi	https://doi.org/10.52842/conf.ecaade.2011.799
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.799-808
summary	As computational design processes have moved from representation to simulation, the focus has shifted towards advanced integration of performance as a form defining measure. Performance, though, is often assessed purely on the level of geometry and stratified between hierarchically independent layers. When looking at tension-active membrane systems, performance is integrated across multiple levels and with only the membrane material itself, defining the structural, spatial and atmospheric qualities. The research described in this paper investigates the integrative nature of this type of lightweight structure and proposes methodologies for generating highly articulated and differentiated systems. As material is a critical component, the research focuses on a system-based approach which places priority on the inclusion of material research and parameterization into a behavior-based computational process.
wos	WOS:000335665500092
keywords	Material behavior; material computation; system; gestalt; tension-active system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_82
id	acadia11_82
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
doi	https://doi.org/10.52842/conf.acadia.2011.082
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
summary	With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2011_009
id	caadria2011_009
authors	Anderson, Jonathon and Ming Tang
year	2011
title	Form follows parameters: Parametric modeling for fabrication and manufacturing processes
doi	https://doi.org/10.52842/conf.caadria.2011.091
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 91-100
summary	As the architectural field continues to explore the possibilities of parametric design it is important to understand that architectural computation has evolved from representations to simulation and evaluation. This paper explores the digital processes of parametric scripting as a way to generate architectural artefacts that can be realized in the physical landscape through various digital fabrication and industrial manufacturing techniques. This paper will highlight the important discoveries of the geometries and the implications the script has on the construction processes. One benefit of using parametric modelling as a component to the manufacturing pipeline is being able to explore several design iterations in the digital realm before ever realizing them in the physical landscape. Furthermore, parametric modelling allows users to control the production documentation and precision needed to manufacture. As a result, the design pipeline presented in this paper seeks to eliminate the construction processes that hinder the physical act of making architecture.
keywords	Manufacturing process; parametric modelling; 3D printing, plastic casting; mould making
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p092
id	cf2011_p092
authors	Bittermann, Michael S.
year	2011
title	Sustainable Conceptual Building Design using a Cognitive System
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 297-314.
summary	A cognitive system for conceptual building design is presented. It is based on an adaptive multi-objective evolutionary algorithm. The adaptive approach is novel and, in contrast with conventional multi-objective evolutionary algorithms, it explores the solution space effectively, while maintaining diversity among the solutions. The suitability of the approach for conceptual design of a multi-purpose building complex is demonstrated in an application. In the application, the goal of maximizing sustainability is treated by means of a model, which is established using neural computations. The approach is found to be suitable for treating the soft nature of the sustainability concept. Also, the capability of the approach to compare the performance of alternative solutions from an unbiased viewpoint, i.e. without committing a-priori to a relative importance among the performance aspects, is demonstrated.
keywords	computational design, sustainable design, adaptive evolutionary algorithm, Pareto optimality, neural computation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_242
id	acadia11_242
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2011
title	Parametric Robot Control: Integrated CAD/CAM for Architectural Design
doi	https://doi.org/10.52842/conf.acadia.2011.242
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 242-251
summary	Robots are gaining popularity in architecture. Snøhetta has recently purchased their own industrial robot, becoming one of the first architectural offices to adopt robot technology. As more and more architects are exposed to robotic fabrication, the need for easy interoperability, integration into architectural design tools and general accessibility will increase. Architects are discovering that industrial robots are much more than kinematic machines for stacking bricks, welding or milling - they are highly multifunctional and can be used for a huge variety of tasks. However, industry standard software does not provide easy solutions for allowing direct robot control right from CAAD (Computer Aided Architectural Design) systems. In this paper we will discuss existing methods of programming industrial robots, published architectural results (Gramazio and Kohler 2008) and the design of a new user interface that allows intuitive control of parametric designs and customized robotic mass production, by integrating CAM (Computer Aided Manufacturing) functions into CAAD.
keywords	robot programming; parametric design; mass customization; grasshopper component design; fabrication; robot milling; digital architecture
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	b339
id	b339
authors	Bunster, Victor
year	2011
title	Tropism-oriented generative design: Analogical models for heterogeneous goal integration
source	Master of Philosophy (MPhil) Thesis. Faculty of Architecture, Building and Planning, The University of Melbourne.
summary	Architecture often requires integration between heterogeneous objectives. Both empirical requirements and speculative aspirations inform design in ways that resist ready formalization under computerizable logic. This thesis explores the possibilities of tropism-analogy as strategy for tackling some of these diverse objectives in a generative system. The feasibility of addressing heterogeneous goals with a computerizable design system is established by reviewing the role of rule-based strategies in vernacular tradition and the possibilities of analogies in recent generative methods. Then, the concept of tropism is analysed in depth, starting from its origins to its manifestation in a broad range of disciplines. This analysis leads to the definition of tropism as a ‘process of turn’ that enables purposeful connections between a system and its environment, an invariant property that may result in different levels of adaptation. These generalized conditions are used as conceptual foundation to explore analogical connections between divergent dimensions of architectural problems, and to define a feedback-enabled generative system that uses tropism-inspired rules in tackling contrasting design objectives. This system is implemented as a proof-of-concept for the Chilean social housing program, where is used to generate façade prototypes that respond simultaneously to thermal comfort and formal expression criteria. The outcomes of this thesis suggest that tropism-analogy can be used in tackling heterogeneous façade objectives and, therefore, to define novel design methods to explore goal-integration in computer-based generative architecture systems.
keywords	generative architecture, design computation, tropism analogy, goal integration, social housing
series	thesis:MSc
type	normal paper
email
more	http://dtl.unimelb.edu.au/R/98KH7M6SLEUI1J2GUA82K5A1AQSR7NK9HMI4GPCRJGFAEYDGHF-01472?func=dbin-jump-full&object_id=277253&local_base=GEN01&pds_handle=GUEST
last changed	2012/07/06 17:57

_id	acadia11_308
id	acadia11_308
authors	Celento, David; Harriss, Edmund
year	2011
title	Potentials for Multi-dimensional Tessellations in Architectural Applications
doi	https://doi.org/10.52842/conf.acadia.2011.308
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 308-313
summary	Computationally, there exist significant potentials to integrate periodic (repeating) and aperiodic (non-repeating) tessellations in architectural applications. While exploration of two-dimensional and three-dimensional tessellations appear in historically significant works, today, higher-dimensional tessellations are capable of being generated computationally which may be useful in various architectural applications. This paper, a collaboration between an architect and mathematician, explores these processes and potentials. Insights will be offered into this early stage exploration regarding the creation and use of higher-dimensional geometries for architectural applications—such as patterning, volumetric descriptions, and modular assemblages.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 07:55

_id	acadia11_186
id	acadia11_186
authors	Chaturvedi, Sanhita; Colmenares, Esteban; Mundim, Thiago
year	2011
title	Knitectonics
doi	https://doi.org/10.52842/conf.acadia.2011.186
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 186-195
summary	The project Knitectonics aims at exploring digital fabrication systems that facilitate optimized, adaptive and specific integrated architectural solutions (Male-Alemany 2010). It is inspired by the beauty of nature systems with their inherent efficiency and performance. The research explored on-site fabrication of monocoques shells, integrating skin and structure along with services and infrastructure, using a simple household technique. It thus embodies a self organized micro system of textures and a macro system of structures. This paper elaborates how the numeric aspects of a textile technique were used, first to digitally imitate the process of assembly and further exploited to develop and visualize a novel fabrication system, based on material research and technical experimentation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia11_292
id	acadia11_292
authors	Davis, Adam; Tsigkari, Martha; Iseki, Takehiko; Aish, Francis
year	2011
title	Just Passing Through: Integration in Computational Environmental Design
doi	https://doi.org/10.52842/conf.acadia.2011.292
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 292-299
summary	This paper proposes Buckminster Fuller’s concept of pattern integrity as a context for understanding computational techniques in environmentally responsive design. We argue that successful integration in this context requires a continuous design medium that allows for heterogeneous, mutable techniques and models. This model of integration is demonstrated by reference to a current project for a large canopy structure in Singapore with specific focus on issues of environmental mediation, object-oriented programming for CAD environments, and functional programming techniques within parametric modeling systems. We discuss the applicability of these novel integrative approaches to wider problems in computational design.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	745e
id	745e
authors	Derix C, Kimpian J, Mason J and Karanouh A
year	2011
title	Feedback Architecture
source	In Terri Peters (ed), Experimental Green Strategies: Ecological Design Research: Architectural Design (AD), Wiley and Sons, Nov-Dec 2011
summary	Sustainable design and ecological building are the most significant global challenges for the design profession. To meet new building regulations and national targets for carbon emissions, all future buildings will be judged on their ‘green’ merits. For architects to maintain a competitive edge in a global market, innovation is now key; the design of new processes, technologies and materials that combat carbon emissions and improve the sustainable performance of buildings are paramount. Contemporary practices have responded by setting up multi- disciplinary internal research and development teams, with offices such as Foster + Partners, HOK and Aedas setting the bar for ground-breaking research and development. The aim of internal groups is often to adapt and create new technologies and materials and to borrow ways of working from other disciplines, to focus on innovation rather than incrementally increasing performance or efficiency. This title offers insights into how a wide range of established and emerging practices are rising to meet these challenges. In pursuit of integrated sustainability and low-energy building, material and formal innovation and new tools and technologies, it illustrates that the future of architecture is evolving in an exchange of ideas across disciplines. Incorporating the creation of new knowledge about ecological building within the profession, it also identifies the emergence of a collective will to seek out new routes that build in harmony with the environment.
keywords	sustainability, morphology, performance, design computation
series	journal paper
type	normal paper
email
more	http://eu.wiley.com/WileyCDA/WileyTitle/productCd-047068979X.html
last changed	2012/09/20 17:07

_id	acadia11_272
id	acadia11_272
authors	Dimcic, Milos; Knippers, Jan
year	2011
title	Free-form Grid Shell Design Based on Genetic Algorithms
doi	https://doi.org/10.52842/conf.acadia.2011.272
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 272-277
summary	In the 21st century, as free-form design grows in popularity, grid shells are becoming a universal structural solution, enabling the conflation of structure and skin (façade) into one single element (Kolarevic 2003). This paper presents some of the results of a comprehensive research project focused on the automated design and optimization of grid structures over some predefined free form shape, with the goal of generating a stable and statically efficient structure. It shows that by combining design and FEM software in an iterative, Genetic Algorithms-based optimization process, stress and deformation in grid shell structures can be significantly reduced, material can be saved and stability enhanced.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

For more results click below: