Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 515

Reformat results as: short short into frame detailed detailed into frame

_id	acadia11_318
id	acadia11_318
authors	Doumpioti,Christina
year	2011
title	Responsive and Autonomous Material Interfaces
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 318-325
doi	https://doi.org/10.52842/conf.acadia.2011.318
summary	This paper presents continuing research on responsive systems in architecture; the ability of architectural systems to change certain properties in response to their surrounding environmental pressures. While doing so, it shifts from current and past examples of mechanical approaches of adaptation, towards biological paradigms of seamless material integration. Looking at biological mechanisms of growth and focusing on the material make-up behind them, the research proposes the exploration of material systems in a two-fold interrelated manner: firstly, through passive material systems of variable elasticity, and secondly through the embedment of smart materials with shape-changing properties. The combination of the two is aiming at architectural systems of functional versatility.Through an interdisciplinary approach, the paper examines the following questions: Is it possible to envisage structures that share the principles of adaptation and response of living organisms? What are the technological challenges faced when designing self-actuated responsive interfaces? Which is the conceptual framework for understanding and investigating complex adaptive and responsive systems? By exploring and synthesizing theories and tools from material science, bioengineering and cybernetics the aim is to inform architectural interfaces able to enhance interconnectivity between the man-made and the natural. Focusing on the self-organization of material systems the intention is to suggest architectural interventions, which become sub-systems of their ecological milieu. The emphasis therefore is placed not on architectural formalism, but on how we can define synthetic environments through constant exchanges of energy, matter and information.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	sigradi2011_361
id	sigradi2011_361
authors	El-Zanfaly, Dina
year	2011
title	Active Shapes. Introducing guidelines for designing kinetic architectural structures
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 176-179
summary	This paper proposes guidelines for designing kinetic architectural structures, in which rules based on Shape Grammars are used for motion capturing and design. There is an increasing demand for adaptive architecture that reconfigures itself physically to meet functional or climatic changes. These guidelines provide a way for the designer to describe and design novel kinetic structures. Based on Shape Grammars, the rule A ->t(A) is introduced. (A) means an Active Shape, that is a physical shape with motion observed or created by the designer.t(A) means a new Active Shape produced by applying one or more transformations t on the original Active Shape to produce a novel motion.
keywords	MotionGrammars; Kinetic Architectural Design; Shape Grammars.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade2011_100
id	ecaade2011_100
authors	Hakak, Alireza M.; Biloria, Nimish
year	2011
title	New perception of virtual environments, Enhancement of creativity: Increasing dimension of design starting point
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.967-975
doi	https://doi.org/10.52842/conf.ecaade.2011.967
wos	WOS:000335665500111
summary	The digital era allows for a new domain of architectural experience. Within a virtual environment designs can be created that go beyond the mere accommodation of literal functions, and that affect and contribute to the human experience by dynamically interacting with and affecting the inhabitants’ life. A key point in “creativity”, considering different disciplines, is the role of previously gained experiences, which cause the emerging of intuition. Accentuating the role of new experiences in enhancing the intuition, by designing in an imaginary world, stands to be an interesting move. Detached from the real one in sense of time and matter, the imaginary world enables the designer to cross the borderline of reality. The hypothesis underlying this ongoing research, from a cognitive point of view, is that the extensiveness of experiences gained by exploring unconventional virtual environments relates positively to both creative performance (enhancing interactivity, lateral thinking, idea generation, etc) and creativity-supporting cognitive processes (retrieval of unconventional knowledge, recruitment of ideas from unconfined virtual environments for creative idea expansion). Practically, the authors propose starting the design from a point cloud in a virtual environment that can be manipulated by the designer immersing in this environment.
keywords	Virtual Environment; Experience; Enhancing creativity; Point cloud
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_019
id	ecaade2011_019
authors	Bourdakis, Vassilis
year	2011
title	Interactive Spatial Design course analysis: 10 years, 150 projects
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.647-652
doi	https://doi.org/10.52842/conf.ecaade.2011.647
wos	WOS:000335665500075
summary	The paper is giving an overview and analysis of an undergraduate, sixth semester, compulsory course titled “Virtual Reality: Interactive Spatial Design” at the department of Architecture, School of Engineering, University of Thessaly, Volos, Greece. It is one of the very few courses on designing digital/synthetic and interactive space_and not merely utilising Virtual Reality (VR) technologies for architectural visualisations_in architectural curricula. The aim of this paper is to primarily draw on a ten year experience on teaching the course and to open up a discussion on the implications of such digital design courses and address emerging problems. This is achieved through a reflection on the teaching process (interaction as design process, curriculum and attained goals) and an analysis and genre classification of the 150 submitted projects.
keywords	Studio teaching; interaction; virtual environments; digital design
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_015
id	caadria2011_015
authors	Davis, Daniel; Flora Dilys Salim and Jane Burry
year	2011
title	Designing responsive architecture: Mediating analogue and digital modelling in the studio
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 155-164
doi	https://doi.org/10.52842/conf.caadria.2011.155
summary	Prototyping digitally responsive architecture requires that architects know how to program and design electronics. Normally they don’t. The challenge for teachers is to teach these skills whilst maintaining a focus on the design potentials of responsive architecture. One method is to teach students to use Input-Output-Process (IPO) diagrams and parametric modelling as pathways into the logic of responsive architecture. The paper discusses the work of students taught this way during a semester long elective. Our analysis shows that IPO diagrams lead to reactive architecture, which matches the current technical limitations of responsive architecture. We argue that mediating analogue and digital models is an essential aspect to successful responsive architecture.
keywords	Responsive architecture; physical interaction; education; parametric design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2011_p049
id	cf2011_p049
authors	Hii Jun Chung, Daniel; Chye Kiang Heng, Lai Choo Malone Lee, Ji Zhang
year	2011
title	Analyzing the Ventilation Performance of Tropical High Density Residential Precincts using Computational Fluid Dynamics
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 351-366.
summary	Major cities in the world are getting bigger as they continue to grow to cater for more population increase. These cities normally forced the urban planning to go high density. In the tropical context, high density cities like Singapore and Hong Kong do not have the luxury of space to go low rise and compact. These cities have to build to the floor area ratio of 4 and above to cater for the population. Their only solution is to go up, as high as possible, to the extent that the natural wind flow pattern will be altered, which brings environmental impact to the people. This is generally not good since wind flow helps to maintain the thermal comfort of the people as heat and pollutants are being channeled out of the city to avoid Urban Heat Island effect. In the tropical context, wind flow is crucial to maintain people‚Äôs comfort as the temperature is generally very high from the exposure of the sun for the entire year. Studies have shown that wind flow plays the most significant part in maintaining human comfort despite exposing to direct sunlight in the tropics. Therefore, wind flow analysis is extremely crucial to make the design sustainable and energy efficient, as people will not have to depend on mechanical ventilation to compensate for the lack of wind flow. Computational Fluid Dynamics (CFD) has always been used in the field of architecture, urban design and urban planning to understand the patterns of wind flow through the built environment apart from wind tunnel tests. The availability of more powerful hardware for the mainstream computer users as well as the lowering costs of these computers made CFD more possible to be adopted in the design world today. This also means using CFD in the design process, especially to analyze the impact of the design to the current site conditions and annual wind patterns will help the new design to be more responsive to the site. The interest of this paper is to analyze the high density typologies to see how well they respond to the local wind flow pattern. A typology is considered acceptable when the wind flow going through the site is still maintaining acceptable wind speed. This means it does not block off the wind and create stagnant spaces. Different designs generate different typologies which will respond differently to the wind pattern. The study aims at comparing the local high density typologies in terms of their response to the wind. Changes to a typology can be explored too to see if the performance will be different. For a typology which is considered a total failure in terms of response to wind, it may improve its performance if the orientation is altered. The CFD software can also parametrically respond to the changes of the typologies‚Äô dimensions. This is helpful to see how much more a typology can still be performing well before failure by increasing the floor area index. The easiest way to do this is to pump up the building height. In conclusion, designing in response to wind is extremely important as it is more sustainable and responsive to Urban Heat Island effect. A design which responds well to the wind patterns will help save cost of cooling load and fan expenditure. The people will also be more willing to use the outdoor spaces which will as a whole generate more vibrant city spaces. As a result, a high density city with huge population count can still enjoy good thermal comfort if the general urban planning and design respond well to wind.
keywords	computational fluid dynamics, sustainability, high density, urban design, airflow, ventilation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_372
id	acadia11_372
authors	James, Anne; Nagasaka, Dai
year	2011
title	Integrative Design Strategies for Multimedia in Architecture
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 372-379
doi	https://doi.org/10.52842/conf.acadia.2011.372
summary	Multidisciplinary efforts that have shaped the current integration of multimedia into architectural spaces have primarily been conducted by collaborative efforts among art, engineering, interaction design, informatics and software programming. These collaborations have focused on the complexities of designing for applications of multimedia in specific real world contexts. Outside a small but growing number of researchers and practitioners, architects have been largely absent from these efforts. This has resulted in projects that deal primarily with developing technologies augmenting existing architectural environments. (Greenfield and Shepard 2007)This paper examines the potential of multimedia and architecture integration to create new possibilities for architectural space. Established practices of constructing architecture suggest creating space by conventional architectural means. On the other hand, multimedia influences and their effect on the tectonics, topos and typos (Frampton 2001) of an architectural space (‘multimedia effects matrix’) suggest new modes of shaping space. It is proposed that correlations exist between those two that could inform unified design strategies. Case study analyses were conducted examining five works of interactive spaces and multimedia installation artworks, selected from an initial larger study of 25 works. Each case study investigated the means of shaping space employed, according to both conventional architectural practices and the principles of multimedia influence (in reference to the ‘multimedia effects matrix’) (James and Nagasaka 2010, 278-285). Findings from the case studies suggest strong correlations between the two approaches to spatial construction. To indicate these correlations, this paper presents five speculative integrative design strategies derived from the case studies, intended to inform future architectural design practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	cf2011_p020
id	cf2011_p020
authors	Kabre, Chitrarekha
year	2011
title	A Computer Aided Design Model for Climate Responsive Dwelling Roof
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 315-332.
summary	Computer-Aided Design models have generated new possibilities in the sustainable design of buildings. Computer models assisting different aspects of architectural design have been developed and used for several decades. A review of contributions of computing to architectural design is given by Gero. Most of the conventional simulation computer programs do not actively support design development and optimization, specially at the formative design stages. It is well established that most decisions that affect comfort and building energy use occur during the formative design stages of the project. Furthermore, the efforts required to implement those decisions at the beginning of the design process are small compared to the effort that would be necessary later on in the design process. Therefore, if sustainable design issues are going to receive an appropriate level of consideration at the beginning of the design process, they must be presented in a way which is useful to the architect and fits with other things the architect is considering at that time. Design is seen as a problem-solving process of searching through a space of design solutions. The process of finding a solution to a design problem involves, identifying one or more objectives, making design decisions based on the objectives, predicting and evaluating the performance to find the acceptable decisions. Each of these activities can be performed inside or outside the formal model. In designing a roof, an architect or building designer has to make many decisions on the materials. The arrangement of these materials determines the aesthetic appearance of the roof and the house. Other considerations that affect the choice of roofing materials are thermal performance, rain, fire protection, cost, availability and maintenance. Recyclability of materials, hazardous materials, life-cycle expectancy, solutions, and design options as they relate to the environment also need to be considered. Consequently, the design of roof has become quite a complex and multifaceted problem. The principal need is for a direct design aid which can generate feasible solutions and tradeoff performance in conflicting requirements and prescribe the optimum solution. This paper presents a conceptual Computer Aided Design model for dwelling roof. It is based on generation and optimization paradigms of Computer Aided Design; which is diametrically opposite to conventional simulation. The design of roof (design goal) can be defined in terms of design objective as "control radiant and conduction heat." This objective must be satisfied to achieve the design goal. The performance variables, such as roof ceiling surface temperature or new thermal performance index (TPI*) must acquire values within certain ranges which will satisfy the objective. Given the required inputs, this computer model automatically generates prescriptive quantitative information to design roof to achieve optimum thermal comfort in warm humid tropics. The model first generates feasible solutions based on the decision rules; next it evaluates the thermal performance of the roof taking into account design variables related to the building‚Äôs roof and finally it applies numerical optimization techniques to automatically determine the optimum design variables, which achieve the best thermal performance. The rational and methodology used to develop the proposed model is outlined and the implementation of model is described with examples for climatic and technological contexts of India and Australia.
keywords	Computer aided design, sustainable design, generation, optimization, dwelling roof, thermal performance
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_014
id	caadria2011_014
authors	Khoo, Chin Koi and Flora Dilys Salim
year	2011
title	Designing elastic transformable structures: Towards soft responsive architecture
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 143-152
doi	https://doi.org/10.52842/conf.caadria.2011.143
summary	This paper discusses the issues of designing and building environment involving spatial conditions that can be physically reconfigured to meet changing needs. To achieve this architectural vision, most current research focuses on the kinetic, mechanical systems and physical control mechanisms for actuation and structural transformation. Instead of the ‘hard’ mechanical joints and components, there is an unexplored ‘soft’ approach using lightweight elastic composite materials for designing responsive architectural skins and structures. This paper investigates the new possibilities for the manipulation of various architectural enclosures using ‘soft’ and elastic transformable structures, in response to environmental, communication and adapting to various contexts. This approach intends to minimise the mechanistic actuations and reduce weight for such operations. Therefore, this research introduces two modules (a tetrahedron and a cube) as responsive spatial models to test the potentials and limitations for the implementation of elastic materials with responsive capability towards reconfigurable architectural enclosure. Despite their individual differences, these experiments identify a trajectory for new possibilities for elastic architectural components that are more appropriate for ‘soft’ responsive architecture. We argue that this approach can provide an early hypothesis for design responsive architecture with a mix of passive and active design strategies.
keywords	Elastic; transformable; soft; responsive
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia11_334
id	acadia11_334
authors	Khoo, Chin Koi; Burry, Jane; Burry, Mark
year	2011
title	Soft Responsive Kinetic System: An Elastic Transformable Architectural Skin for Climatic and Visual Control
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 334-341
doi	https://doi.org/10.52842/conf.acadia.2011.334
summary	Most designers of dynamic building skins that reconfigure themselves in changing conditions have utilised mechanical systems. However, when designing for dynamic responsiveness, these systems often involve intricate and high-tech mechanistic joints, actuators and control. This research investigates the possibility of the ‘soft’ form-changing material systems to minimise the use of ‘hard’ mechanical components for kinetic responsive architectural skins. The research goal is to develop a prototype system that can be used to retrofit an existing building with an application of a ‘second skin’ that performs well in various climate conditions and is visually compelling. This approach is tested by the prototype, namely “Curtain”. It serves two fundamental purposes: Comfort and Cosmetic, to improve the existing interior and exterior spatial conditions. As an early proposition, the significance of this research offers a practical method for realising a ‘soft’ transformable architectural skin that synthesises passive cooling, manipulates sunlight and is set as an active shading device. Parametric design is used to explore and simulate these climatic and visual design constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p003
id	cf2011_p003
authors	Ng, Edward; Ren Chao
year	2011
title	Sustainable Planning with a Synergetic Collation of Thermal and Dynamic Characteristics of Urban Climate using Map Based Computational Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 367-382.
summary	Since 2006, half of the world’s population lives in cities. In the age of climate change, designing for quality environmental living conditions and sustainability is a topical concern. However, on the one hand, designers and city planners operate with their three dimensional city morphological data such as building shapes and volumes, forms and their spacings, and functional attributes and definition signatures. On the other hand, urban climatologists operate with their numbers and equations, quantities and signals, and normals and anomalies. Traditionally the two camps do not meet. It is a challenge to develop design tools that they can work together. Map based information system based on computational geographic information system (GIS) that is properly structured and represented offers a common language, so to speak, for the two professional groups to work together. Urban climatic map is a spatial and graphical tool with information embedded in defined layers that are collated so that planners and urban climatologists can dialogue over design issues. With various planning and meteorological data coded in defined grid resolutions onto the GIS map system, data can be synergized and collated for various understandings. This papers explains the formulation of Hong Kong’s GIS based Urban Climatic Map as an example of how the map works in practice. Using the map, zonal and district based planning decisions can be made by planners and urban climatologists that lead to new designs and policy changes.
keywords	sustainable development, urban planning, urban thermal, urban dynamics, computer tools
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_107
id	ecaade2011_107
authors	Peters, Brady; Tamke, Martin; Nielsen, Stig Anton; Andersen, Søren Vestbjerg; Haase, Mathias
year	2011
title	Responsive Acoustic Surfaces: Computing Sonic Effects
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.819-828
doi	https://doi.org/10.52842/conf.ecaade.2011.819
wos	WOS:000335665500094
summary	Acoustic performance is defined by the parameter of reverberation time; however, this does not capture the acoustic experience in some types of open plan spaces. As many working and learning activities now take place in open plan spaces, it is important to be able to understand and design for the acoustic conditions of these spaces. This paper describes an experimental research project that studied the design processes necessary to design for sound. A responsive acoustic surface was designed, fabricated and tested. This acoustic surface was designed to create specific sonic effects. The design was simulated using custom integrated acoustic software and also using Odeon acoustic analysis software. The research demonstrates a method for designing space- and sound-defining surfaces, defines the concept of acoustic subspace, and suggests some new parameters for defining acoustic subspaces.
keywords	Architectural Acoustics; Performance-Driven Design; Parametric Design; Digital Fabrication
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_226
id	acadia11_226
authors	Salim, Flora; Jaworski, Przemyslaw; Kaftan, Martin; Friedrich, Eva; Urquiza, Rafael; Oh, Suhee; Fihn, John; Galaso, Jose Luis; Roa, Rafael; Banke, Tore; Bak, Jakob; Kalvo, Raul; Di Leo, Stefan; Madeddu, Davide; Albuquerque, Joao; Gillespie, David; Østergaard, Jacob
year	2011
title	Informing Architecture and Urban Modeling with Real-world Data on 3D Tangible Interfaces and Augmented Displays
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 226-233
doi	https://doi.org/10.52842/conf.acadia.2011.226
summary	The proliferation of online and digital data in our world yields unprecedented opportunities for connecting physical and digital parametric models with live data input and feedback. Tangible interfaces and augmented displays provide theatrical settings for designers to visualize real-world data and experience realtime feedback while manipulating physical and digital models on the table. This paper proposes a new approach to design workflow, where physical model and virtual model can be interconnected and informed in realtime by multiple analytical datasets and live data streams. Using 3D scanning, blob detection, and multi-touch techniques, multidimensional tangible interfaces and augmented displays presented in this paper demonstrate a powerful new approach for designing and interacting with physical models, materials, and environmental data.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:56

_id	cf2011_p104
id	cf2011_p104
authors	Sherif, Ahmed; El Zafarany Abbas
year	2011
title	Designing the Window to Fit a Shading Device, A Reversed Method for Optimizing Energy Efficient Fenestration
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 383-399.
summary	Solar radiation passing through a window contributes significantly to cooling loads and energy consumption, especially in hot climates. Most CAAD tools handling energy efficient design help designers to define the optimal shading device to protect a window of a certain shape, usually a rectangle, but some parts of the rectangular window (such as lower corners) are typically difficult to protect. Usually the whole shading device becomes bigger to shade these corners, which over-shades the rest of the window, increasing artificial lighting and heating loads. It also increases the complexity, visual impact and cost of the shading device. Changing the shape of the window by cutting these corners may reduce the size of the shading device considerably, which opens way to a different –or even a reversed- approach: “Designing the window to fit a shading device instead of designing the shading device to fit the window!” This approach has several potential applications. The building form itself sometimes works implicitly as a shading device. For example, if the building plan shape is a U or L shape, some parts of the walls become shaded, the windows can be placed in these shaded parts, and the window shape can be designed to fit the shadow pattern caused by the building form, changes in the building profile gives similar chances to design windows that fit the shadow pattern. Conceptually, this approach makes energy efficiency a form giving attribute, helping to create innovative facades, while giving an energy efficient configuration for both window and its shading device. CAAD tools can help the designer adopt such an innovative approach, by proposing the window shape that suits an arbitrary shading device created by the designer or a building mass. This paper examines the validity of the approach and introduces the approach required for developing a software module that can be integrated with other CAAD tools such as the Ecotect software. This would enable the designers to use this approach. The method handles the complexity of time-dependent solar geometry and radiation intensity, the geometry of both the window and shading device, and the designers set of objectives, enabling the designer to define the required configuration of window and shading device.
keywords	Energy Efficiency, Low Energy Architecture, Windows, Shading Devices, Algorithm, Oprimization
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2016_013
id	ascaad2016_013
authors	Belkis Öksüz, Elif
year	2016
title	Parametricism for Urban Aesthetics - A flawless order behind chaos or an over-design of complexity
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 105-112
summary	Over the last decade, paradigm shifts in the philosophy of space-time relations, the change from space-time to spatio-temporality, caused significant changes in the design field, and introduced new variations and discourses for parametric approaches in architecture. Among all the discourses, parametricism is likely the most spectacular one. The founder of parametricism, Patrik Schumacher (2009) describes it as “a new style,” which has “the superior capacity to articulate programmatic complexity;” and “aesthetically, it is the elegance of ordered complexity in the sense of seamless fluidity.” In its theoretical background, Schumacher (2011) affiliates this style with the philosophy of autopoiesis, the philosophy that stands between making and becoming. Additionally, parametricism concerns not only the physical geometry in making of form; but also discusses the relational and causal aspects in becoming of form. In other words, it brings the aesthetic qualities in making through the topological intelligence behind becoming. Regarding that, parametricism seems an effective way of managing /creating complex topologies in form-related issues. However, when it comes to practice, there are some challenging points of parametricism in large-scale design studies. Thus, this work underlines that the dominance of elegance for urban planning has the potential of limiting the flexible and dynamic topology of the urban context, and objectifying the whole complex urban form as an over-designed product. For an aesthetic inquiry into urban parametricism, this paper highlights the challenging issues behind the aesthetic premises of parametricism at the urban design scale. For that, Kartal Master Plan Design Proposal by Zaha Hadid Architects (2006) will be discussed as an exemplary work.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p043
id	cf2011_p043
authors	Boeykens, Stefan
year	2011
title	Using 3D Design Software, BIM and Game Engines for Architectural Historical Reconstruction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 493-509.
summary	The use of digital tools has become a tremendous aid in the creation of digital, historical reconstructions of architectural projects. Regular visualization techniques have been used for quite some time and they still pose interesting approaches, such as following cinematic techniques [1]. While common visualizations focus on pre-rendered graphics, it is possible to apply Game Engines [2] for real-time architectural visualization, as witnessed by [3] and [4]. In the course of our teaching and research efforts, we have collected experience with several visualization and modeling techniques, including the use of gaming engines. While the modeling of qualitative geometry for use in regular visualization already poses an elaborate effort, the preparation of models for different uses is often not trivial. Most modeling systems only support the creation of models for a single amount of detail, whereas an optimized model for a real-time system will have fairly different constraints when compared to non-real-time models for photorealistic rendering and animation. The use of parametric methods is one usable approach to tackle this complexity, as illustrated in [4]. One of the major advantages of using parametric approaches lies precisely in the possibility of using a single model to generate different geometry with control over the amount of detail. We explicitly tackle this in a Building Information Modeling (BIM) context, as to support much more than purely 3D geometry and visualization purposes. An integrated approach allows the same model to be used for technical drawings in 2D and an optimized 3D model in varying levels of detail for different visualization purposes. However, while most Building Information Modeling applications are targeted to current architectural practice, they seldom provide sufficient content for the recreation of historical models. This thus requires an extensive library of parametric, custom objects to be used and re-used for historically accurate models, which can serve multiple purposes. Finally, the approach towards the historical resources also poses interpretation problems, which we tackled using a reasonably straightforward set up of an information database, collecting facts and accuracies. This helps in the visualization of color-coded 3D models, depicting the accuracy of the model, which is a valuable graphical approach to discuss and communicate information about the historical study in an appealing format. This article will present the results of different reconstruction case studies, using a variety of design applications and discuss the inherent complexity and limitations in the process of translating an active, evolving model into an environment suitable for use in a real-time system. Especially workflow issues are identified, as the translation of the model into the game engine should be repeated several times, when the model is further refined and adapted. This used to involve a large amount of repetitive work, but the current crop of game engines have much better approaches to manage the updating of the geometry.
keywords	Real-time architecture, game engines, cultural heritage, digital reconstruction, parametric modeling, Building Information Modeling
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_136
id	ecaade2011_136
authors	Bohnenberger, Sascha; de Rycke, Klaas; Weilandt, Agnes
year	2011
title	Lattice Spaces: Form optimisation throgh customization of non developable 3d wood surfaces
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.751-758
doi	https://doi.org/10.52842/conf.ecaade.2011.751
wos	WOS:000335665500087
summary	This paper discusses a collaborative project by RDAI architects, Bollinger+Grohmann and the timber construction company Holzbau Amann. The project is located in a former swimming pool in Paris and it is part of the new interior of a flagship store of the French fashion label Hermes. In late 2009, Rena Duma Architects, asked Bollinger+Grohmann to collaborate as structural engineers on a challenging design proposal within a very short timeframe. Three wooden lattice structures, the so-called “bulle” and one monumental staircase with a similar design approach characterize the interior of the new flagship store. The lattice structures are dividing the basement into different retail spaces. They vary in height (8-9 m) and diameter (8-12 m) and have a free-form shaped wicker basket appearance. Wood was the chosen material for these structures to strengthen the idea of the wickerbaskets and to create an interior space with a sustainable and innovative material.
keywords	Digital production; parametric design; mass customization; wood; digital crafting
series	eCAADe
email
last changed	2022/05/01 23:21

For more results click below: