Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 328

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	10cc
id	10cc
authors	Alves, Gilfranco; Nojimoto, Cynthia
year	2011
title	Strings Pavilion: design process
source	V!RUS, [online] n. 6. [online] Available at: . [Accessed: 30 December 2011].
summary	The paper presents the design process of Strings Pavilion developed during the Architectural Association School of Architecture's Visiting School Workshop occurred in Sao Paulo city, in July, 2011. The pavilion is an outcome from a collective creation process of five persons team working in an immersive way during ten days; they explored several possibilities of experimentation and hybrid processes from researches about materials features and behaviors as well as parametric software. Fundamental concepts such as loop, feedback and responsivity from Second Order Cybernetic and Systems Theory were included and applied in the creation process.
keywords	design processes; Second Order Cybernetic; Complex Systems, parametric design; digital fabrication; interactivity.
series	other
type	normal paper
email
more	http://www.nomads.usp.br/virus/virus06/?sec=6&item=2&lang=en
last changed	2012/01/09 07:27

_id	sigradi2011_084
id	sigradi2011_084
authors	Alves, Gilfranco; Pratschke, Anja
year	2011
title	Mediação digital e revisão dos processos de design em Arquitetura [Digital mediation and review of design processes in Architecture]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 35-38
summary	This paper presents partial results of doctoral research entitled Architecture, Semiotics and Second Order Cybernetics: observation, representation and performance in design process. The research is linked to the Nomads.usp research group and proposes a review of design process, considering the mediation of digital media by using concepts of Second order Cybernetics. This work start with the hypothesis that in a contemporary context, professional demands of architects and designers requires a different approach in relation to the concept of emergence in architecture, and also describes an experiment during the AA Visiting School SP 2011, the Strings / Supple Pavilion project.
keywords	Design processes; digital media; emergence; performance.; Second-order Cybernetics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2011_009
id	caadria2011_009
authors	Anderson, Jonathon and Ming Tang
year	2011
title	Form follows parameters: Parametric modeling for fabrication and manufacturing processes
doi	https://doi.org/10.52842/conf.caadria.2011.091
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 91-100
summary	As the architectural field continues to explore the possibilities of parametric design it is important to understand that architectural computation has evolved from representations to simulation and evaluation. This paper explores the digital processes of parametric scripting as a way to generate architectural artefacts that can be realized in the physical landscape through various digital fabrication and industrial manufacturing techniques. This paper will highlight the important discoveries of the geometries and the implications the script has on the construction processes. One benefit of using parametric modelling as a component to the manufacturing pipeline is being able to explore several design iterations in the digital realm before ever realizing them in the physical landscape. Furthermore, parametric modelling allows users to control the production documentation and precision needed to manufacture. As a result, the design pipeline presented in this paper seeks to eliminate the construction processes that hinder the physical act of making architecture.
keywords	Manufacturing process; parametric modelling; 3D printing, plastic casting; mould making
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2011_290
id	sigradi2011_290
authors	Azevedo de Oliveira, Fabiana Mabel
year	2011
title	Redes sociotécnicas: a concepção de uma interface [Sociotechnical network: design of an interface]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 568-570
summary	This paper aims to examine the forms of representation of the processes of creation of Web interfaces for platforms. Its origin is associated with a proposal that understands the new communications technologies, specifically the Internet, and the possibility of formation of a sociotechnical network, as a tool to expand the ways of social interaction (Egler, 2007). Increasing access to information and communication, making the process more open, redefining the relationships and social exchanges, and allowing its mediation by digital processes.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_099
id	sigradi2011_099
authors	Balmaceda, Maria; Díaz Reinoso, Verónica; Pringles, Alicia; Azeglio, Carlos
year	2011
title	Cultura digital, cultura aumentada "conocimiento aumentado" [Digital Culture, Augmented Culture. Augmented knowledge?]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 415-418
summary	This study investigates the potential of multimedia learning materials to improve the possibilities of knowledge construction processes about computer graphics technology. The primary hypothesis was that information in multimedia format, could contribute to overcome epistemological obstacles students encounter, more effectively than printed literature, and improve the quality of their learning. We designed multimedia learning materials, using appropriate pedagogy and instructional strategies. We gave them to the students and used them for teaching. The results suggest that the hypothesis could be corroborated, thus indicators of knowledge level and quality of the students, showed a significant upswing.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_332
id	sigradi2011_332
authors	Berns, Torben; Nguyen, Philam
year	2011
title	The Subject on the Table: Augmented Reality and the Technical Image
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 571-574
summary	This paper approaches the dilemma of the technical image as it relates to an understanding of the constructed subject. Proceeding from a condition identified in film and popular culture, the authors construct an investigative, graduate level workshop around a collaborative interface and archive. The project was premised upon the notion that a new ground, based in visualization processes and incorporating existing technologies, must be practically and critically explored to make any sense at all of the subjectivity already coeval with these technologies.
keywords	Technical image; subjectivity; collaborative work; sensus communis
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_409
id	sigradi2011_409
authors	Bertoni, Griselda; De Monte, Andrea
year	2011
title	Mediaciones perceptivas. Desafíos en la incorporación de la tecnología como instrumento potenciador del proceso de aprendizaje en el TCG [Perceptual mediation. Challenges in incorporating technology as a tool enhacing the learning process in the TCG]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 472-475
summary	This work presents an introduction to current problems detected in the teaching and learning of perceptual and communication processes in front of the availability of disipositivos installed and digital media courses to students enrolled for Design and Architecture careers of our faculty. The same seeks to clarify a state of affairs to continue studies already carried out (Stipech 2004), (Bertero 2009), in relation to issues of representation in the design disciplines, while rehearsing possibilities updated theory and practice in the field of workshop.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_120
id	sigradi2011_120
authors	Briones, Carolina
year	2011
title	Diseño digital y manufactura artesanal, ejemplos de diseño paramétrico en Chile [Digital design and handcrafted manufacturing, examples of parametric design in Chile]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 60-63
summary	The present article tracks and attempts to portray the current state of the art, in relation to the application of parametric or algorithmic design in Chilean architecture and design production. These technologies have emerged in the last decades and have become increasingly popular in the international arena. Through the presentation of examples made at different scales, the processes of digital and traditional manufacture used in each work of art are revealed. The difficulties, advantages and virtues of these tools are discussed and addressed from a local educational and professional perspective.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2011_000
id	sigradi2011_000
authors	Chiarella, Mauro; Tosello, Maria Elena (eds.)
year	2011
title	Sigradi 2011: Augmented Culture
source	Proceedings of the 15th Iberoamerican Congress of Digital Graphics Graphics / ISBN 13: 978-987-657-679-6] Argentina - Santa Fe 16-18 November 2011, 579 p.
summary	“Augmented Culture” talks about a combination of interdependent social and technological meanings in a complex, multiple, interactive and interconnected context. It acknowledges that a new social and cultural paradigm is being developed as the old barriers of time, space and language are ruptured and transcended. In our knowledge-based civilization, we inhabit interconnected societies where new relational forms are configured. Additionally, cultural expressions have been qualitatively augmented starting from their integration with information and communication technologies, which have dramatically enhanced not only their creative and reflective processes, but also the realization and construction of cultural objects. In this sense, an “Augmented Culture” compels us to investigate the wide and complex spectrum of the variables that express the interdisciplinary, collective and participative constructions of our present age, so strongly related to visual culture, information culture and interface culture. Thus, we consider it necessary to concentrate, to expand, to spread and to share exploratory, descriptive or explanatory experiences and productions of such phenomena. The attempt is to define a multidimensional theoretical framework that while recognizing today’s state-of-the-art and tendencies, it provides us with a critical viewpoint.
series	other
type	normal paper
email
last changed	2011/12/30 18:05

_id	sigradi2011_391
id	sigradi2011_391
authors	Claro, Ana Julia
year	2011
title	Herramientas digitales para la ideación y desarrollo de formas complejas [Digital tools for conception and development of complex forms]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 197-200
summary	The aim of this investigation is to study the connection between geometry and architecture, nowadays strongly stimulated by the use of digital tools, design and fabrication. At the same time, it expresses the need to develop interdisciplinary processes when analyzing the conception and construction of complex forms in the architecture, focusing on creating a computer application in charge of the unfold of NURBS surfaces, carried out for this study.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	sigradi2011_405
id	sigradi2011_405
authors	García Alvarado, Rodrigo; Lyon Gottlieb, Arturo
year	2011
title	De la Optimización Estructural Evolutiva al Diseño Paramétrico basado en desempeño; experiencias en plataformas integradas para estrategias de diseño multidisciplinares [From Evolutionary Structural Optimization to performance driven Parametric Design; experiences on integrated platforms for multidisciplinary design strategies]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 201-205
summary	This paper presents a research developed by a multidisciplinary team looking into the use of Topological Optimization and its integration to collaborative design platforms in early stages of design processes. The interest of the experience is focused on how Evolutionary Structural Optimization (ESO) models can be further integrated into parametric design software for the definition of adaptable components in response to environmental and architectural criteria. This research explores platforms and processes for the collaboration between software development, structural engineers and architects in early stages of design as a possibility to relate the potential of computational processes with the definition of design criteria involving architectural, structural and environmental parameters.
keywords	Evolutionary Structural Optimization; Topological Analysis; Parametric Design; Performance Driven Design
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2011_068
id	sigradi2011_068
authors	Gomez Zamora, Paula
year	2011
title	NonGeometric Information Visualization in BIM. An Approach to Improve Project Team Communication
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 22-26
summary	Building design and construction processes use geometrical models as well as other documentation for com- municating information during all phases of a project. Currently, an important amount of information included into the documentation is not linked to the 3D model, such as emails or decision-making updates. A huge challenge is an accurate and effective management of this non-geometrical information to improve team communication. This paper proposes the uses of Information Visualization techniques for managing these data visually, enhancing human understanding and interpretation. This research area is situated in the intersection of three areas of computing
keywords	Building Information Modeling (BIM); non-geometrical information; information visualization; team project communication
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2011_018
id	ecaade2011_018
authors	Grobman, Yasha J.; Ron, Ruth
year	2011
title	Digital Form Finding: Generative use of simulation processes by architects in the early stages of the design process
doi	https://doi.org/10.52842/conf.ecaade.2011.107
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.107-115
summary	The paper presents performance oriented approaches to digital form finding which stems from the lines of research on performance and morphogenesis in architectural design. The main contribution to the earlier research is threefold; it examines the potential of the presented design processes to integrate interdisciplinary approach based on the use of simulation tools by architects or direct data exchange between simulation tools and design. Secondly, it explores new methods to generate initial architectural form based on performance information that apply to both building scale and urban scale, and lastly, it develops the theoretical framework on the ramifications of employing simulation technology and techniques in architectural design.
wos	WOS:000335665500012
keywords	Form generation; performance; simulation; parametric design; form finding
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_125
id	sigradi2011_125
authors	Groetelaars, Natalie Johanna; Amorín, Arivaldo
year	2011
title	Tecnologia 3D Laser Scanning: Características Processos e Ferramentas para Manipulação de Nuvens de Pontos [3D Laser Scanning Technology: characteristics, processes and point cloud tools]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 490-494
summary	This paper presents techniques and tools to manipulate point cloud from terrestrial laser scanner. Firstly, architectural survey phases are presented, since planning and capturing point cloud of existing buildings, until processing and obtaining several products from point cloud data. Secondly, we cite and classify in four categories some point cloud software, used in laser scan survey and processing phases: (1) scan; (2) visualization; (3) processing; (4) quality inspection.
keywords	3D laser scanning technology; point cloud tools; geometrical modeling; architectural survey; computational tools
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2011_100
id	ecaade2011_100
authors	Hakak, Alireza M.; Biloria, Nimish
year	2011
title	New perception of virtual environments, Enhancement of creativity: Increasing dimension of design starting point
doi	https://doi.org/10.52842/conf.ecaade.2011.967
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.967-975
summary	The digital era allows for a new domain of architectural experience. Within a virtual environment designs can be created that go beyond the mere accommodation of literal functions, and that affect and contribute to the human experience by dynamically interacting with and affecting the inhabitants’ life. A key point in “creativity”, considering different disciplines, is the role of previously gained experiences, which cause the emerging of intuition. Accentuating the role of new experiences in enhancing the intuition, by designing in an imaginary world, stands to be an interesting move. Detached from the real one in sense of time and matter, the imaginary world enables the designer to cross the borderline of reality. The hypothesis underlying this ongoing research, from a cognitive point of view, is that the extensiveness of experiences gained by exploring unconventional virtual environments relates positively to both creative performance (enhancing interactivity, lateral thinking, idea generation, etc) and creativity-supporting cognitive processes (retrieval of unconventional knowledge, recruitment of ideas from unconfined virtual environments for creative idea expansion). Practically, the authors propose starting the design from a point cloud in a virtual environment that can be manipulated by the designer immersing in this environment.
wos	WOS:000335665500111
keywords	Virtual Environment; Experience; Enhancing creativity; Point cloud
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2011_017
id	caadria2011_017
authors	Hanafin, Stuart; Sambit Datta and Bernard Rolfe
year	2011
title	Tree facades: Generative modelling with an axial branch rewriting system
doi	https://doi.org/10.52842/conf.caadria.2011.175
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 175-184
summary	The methods and algorithms of generative modelling can be improved when representing organic structures by the study of computational models of natural processes and their application to architectural design. In this paper, we present a study of the generation of branching structures and their application to the development of façade support systems. We investigate two types of branching structures, a recursive bifurcation model and an axial tree based L-system for the generation of façades. The aim of the paper is to capture not only the form but also the underlying principles of biomimicry found in branching. This is then tested, by their application to develop experimental façade support systems. The developed algorithms implement parametric variations for façade generation based on natural tree-like branching. The benefits of such a model are: ease of structural optimization, variations of support and digital fabrication of façade components.
keywords	Parametric Modelling; Biomimicry; Lindenmayer Systems; Branching Structures
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2011_092
id	sigradi2011_092
authors	Hemmerling, Marco
year	2011
title	Informed Material
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 339-342
summary	Next to the possibilities of digital form-finding strategies, parametric design and computational visualization techniques, which lead to an increasing virtualization of our society - rapid technologies allow today for the direct translation of the digital model into the physical world. As a result of this process the experience of digital realities, driven by virtual environment gets an interesting shift back to the physical world. Against this background the paper points out that it is a question of design to define contemporary and intended matters, processes and strategies of interaction, in other words: to inform the design.
keywords	Rapid Prototyping; Materialization; Perception; Digital Design Tools; Human-Centered Design
series	SIGRADI
email
last changed	2016/03/10 09:53

For more results click below: