Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 562

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p049
id	cf2011_p049
authors	Hii Jun Chung, Daniel; Chye Kiang Heng, Lai Choo Malone Lee, Ji Zhang
year	2011
title	Analyzing the Ventilation Performance of Tropical High Density Residential Precincts using Computational Fluid Dynamics
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 351-366.
summary	Major cities in the world are getting bigger as they continue to grow to cater for more population increase. These cities normally forced the urban planning to go high density. In the tropical context, high density cities like Singapore and Hong Kong do not have the luxury of space to go low rise and compact. These cities have to build to the floor area ratio of 4 and above to cater for the population. Their only solution is to go up, as high as possible, to the extent that the natural wind flow pattern will be altered, which brings environmental impact to the people. This is generally not good since wind flow helps to maintain the thermal comfort of the people as heat and pollutants are being channeled out of the city to avoid Urban Heat Island effect. In the tropical context, wind flow is crucial to maintain people‚Äôs comfort as the temperature is generally very high from the exposure of the sun for the entire year. Studies have shown that wind flow plays the most significant part in maintaining human comfort despite exposing to direct sunlight in the tropics. Therefore, wind flow analysis is extremely crucial to make the design sustainable and energy efficient, as people will not have to depend on mechanical ventilation to compensate for the lack of wind flow. Computational Fluid Dynamics (CFD) has always been used in the field of architecture, urban design and urban planning to understand the patterns of wind flow through the built environment apart from wind tunnel tests. The availability of more powerful hardware for the mainstream computer users as well as the lowering costs of these computers made CFD more possible to be adopted in the design world today. This also means using CFD in the design process, especially to analyze the impact of the design to the current site conditions and annual wind patterns will help the new design to be more responsive to the site. The interest of this paper is to analyze the high density typologies to see how well they respond to the local wind flow pattern. A typology is considered acceptable when the wind flow going through the site is still maintaining acceptable wind speed. This means it does not block off the wind and create stagnant spaces. Different designs generate different typologies which will respond differently to the wind pattern. The study aims at comparing the local high density typologies in terms of their response to the wind. Changes to a typology can be explored too to see if the performance will be different. For a typology which is considered a total failure in terms of response to wind, it may improve its performance if the orientation is altered. The CFD software can also parametrically respond to the changes of the typologies‚Äô dimensions. This is helpful to see how much more a typology can still be performing well before failure by increasing the floor area index. The easiest way to do this is to pump up the building height. In conclusion, designing in response to wind is extremely important as it is more sustainable and responsive to Urban Heat Island effect. A design which responds well to the wind patterns will help save cost of cooling load and fan expenditure. The people will also be more willing to use the outdoor spaces which will as a whole generate more vibrant city spaces. As a result, a high density city with huge population count can still enjoy good thermal comfort if the general urban planning and design respond well to wind.
keywords	computational fluid dynamics, sustainability, high density, urban design, airflow, ventilation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p098
id	cf2011_p098
authors	Bernal, Marcelo; Eastman Charles
year	2011
title	Top-down Approach for Interaction of Knowledge-Based Parametric Objects and Preliminary Massing Studies for Decision Making in Early Design Stages
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 149-164.
summary	Design activities vary from high-degree of freedom in early concept design stages to highly constrained solution spaces in late ones. Such late developments entail large amount of expertise from technical domains. Multiple parallel models handle different aspects of a project, from geometric master models to specific building components. This variety of models must keep consistency with the design intent while they are dealing with specific domains of knowledge such as architectural design, structure, HVAC, MEP, or plumbing systems. Most of the expertise embedded within the above domains can be translated into parametric objects by capturing design and engineering knowledge through parameters, constraints, or conditionals. The aim of this research is capturing such expertise into knowledge-based parametric objects (KPO) for re-usability along the design process. The proposed case study ‚Äì provided by SOM New York‚ is the interaction between a massing study of a high-rise and its building service core, which at the same time handles elevators, restrooms, emergency stairs, and space for technical systems. This project is focused on capturing design expertise, involved in the definition of a building service core, from a high-rise senior designer, and re-using this object for interaction in real-time with a preliminary massing study model of a building, which will drive the adaption process of the service core. This interaction attempts to provide an integrated design environment for feedback from technical domains to early design stages for decision-making, and generate a well-defined first building draft. The challenges addressed to drive the instantiation of the service core according to the shifting characteristics of the high-rise are automatic instantiation and adaptation of objects based on decision rules, and updating in real-time shared parameters and information derived from the high-rise massing study. The interaction between both models facilitates the process from the designer‚Äôs perspective of reusing previous design solutions in new projects. The massing study model is the component that handles information from the perspective of the outer shape design intent. Variations at this massing study model level drive the behavior of the service core model, which must adapt its configuration to the shifting geometry of the building during design exploration in early concept design stages. These variations depend on a list of inputs derived from multiple sources such as variable lot sizes, building type, variable square footage of the building, considerations about modularity, number of stories, floor-to-floor height, total building height, or total building square footage. The shifting combination of this set of parameters determines the final aspect of the building and, consequently, the final configuration of the service core. The service core is the second component involved in the automatic generation of a building draft. In the context of BIM, it is an assembly of objects, which contains other objects representing elevators, restrooms, emergency stairs, and space for several technical systems. This assembly is driven by different layouts depending on the building type, a drop-off sequence, which is the process of continuous reduction of elevators along the building, and how this reduction affects the re-arrangement of the service core layout. Results from this research involves a methodology for capturing design knowledge, a methodology for defining the architecture of smart parametric objects, and a method for real-time-feedback for decision making in early design stages. The project also wants to demonstrate the feasibility of continuous growth on top of existing parametric objects allowing the creation of libraries of smart re-usable objects for automation in design.
keywords	design automation, parametric modeling, design rules, knowledge-based design
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_056
id	ecaade2011_056
authors	Czerkauer-Yamu, Claudia; Voigt, Andreas
year	2011
title	Strategic Planning and Design with Space Syntax
doi	https://doi.org/10.52842/conf.ecaade.2011.125
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.125-133
summary	In strategic planning and design, planners can benefit a great deal from planning models and simulations (2D, 3D and 4D). Carrying out strategic planning and design with the support of (spatial) models can open up a bright spectrum of opportunities and insights that were not evident before. Planning models and simulations support an awareness-raising process. In this context, space syntax also fits in. In the following we will discuss the constraints and opportunities of space syntax and show how space syntax can add value to strategic planning and design (based on the Ljubljana masterplan) for a sustainable and sustaining built environment.
wos	WOS:000335665500014
keywords	Urban analysis; strategic planning and design; space syntax; spatial simulation and modelling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_316
id	acadia11_316
authors	d’Estree Sterk, Tristan
year	2011
title	Using Robotic Technologies to Integrate External Influences in Design
doi	https://doi.org/10.52842/conf.acadia.2011.316
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 316-317
summary	Designers have always assembled materials to form purposeful connections between ideas and spaces, uniting the height of human thought with the great ability of people to shape the world with their hands and tools. People have understood this opportunity and used it to inform the material investments that they make in buildings.When reflecting upon the past ten or so years of practice it is clear that some methodologies have matured. Professionals, academics and students have found new ways to connect thinking and doing. These connections have a different flavor and tend to feel more analytical to those once used. Previously internalized decisions are being made increasingly explicit by a generation of designers that has found a more meaningful overlap between the theories and procedures of design. The methods they use are visual, analytical, as well as intuitive, and encompassed within a whole gamut of tools such as Grasshopper, Ecotect, Digital Project and Generative Components. All of these tools provide opportunities for designers to inquisitively explore alternative formal, spatial and environmental relationships. The opportunities that are brought by increasing externalization are important. Design is at once turning away from its focus on the end result, be it a building or an interior, and toward a renewed interest in the design process itself. Brought about by encapsulating design principles into self-made tools, this shift has enabled families of formal outcomes rather than singular instances of ‘pure’ architecture. These multiple, equally valid, formal outcomes disrupt more traditional measures of formal legitimacy and help move architects toward more relational understandings of space, time and environment.
series	ACADIA
type	moderator overview
email
last changed	2022/06/07 07:55

_id	cf2011_p019
id	cf2011_p019
authors	Haeusler, Matthias Hank; Beilharz Kirsty
year	2011
title	Architecture = Computer‚ from Computational to Computing Environments
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 217-232.
summary	Drawing on architecture, urban digital media, engineering, IT and interaction design, the research presented in this paper outlines a possible shift from architecture designed through computation (any type of process, algorithm or measurement done in a computational matter) towards architecture capable of computing (developing, using and improving computer technology, computer hardware and software as a space-defining element). The research is driven by recent developments in four fields, as follows: (a) Architecture in its recent development has shifted from a planar box, as was the ideal in the modernist movement, towards complex and non-standard forms. (b) The design concepts of non-standard surfaces have been adopted into media facades and media architecture by liberating the pixel from its planar position on a screen [1]. (c) Advancements in pervasive computing applications are now able both to receive information from the environment in which they are used and to detect other devices that enter this environment [2]. (d) Developments in advanced autonomous systems such as Human Computer Interaction (HCI) or Human Robot Interaction (HRI), have produced intelligent systems capable of observing human cues and using these cues as the basis for intelligent decision-making [3]. Media fa_ßade developments work in the direction of the above-mentioned four fields, but often come with limitations in architectural integration; they need additional components to interact with their environment and their interactions are both often limited to visual interactions and require the user to act first. The researched system, Polymedia Pixel [4] discussed in this paper, can overcome these limitations and fulfil the need for a space-defining material capable of computing, thus enabling a shift from architecture designed by computation towards architecture capable of active computing. The Polymedia Pixel architecture merges digital technology with ubiquitous computing. This allows the built environment and its relation with digital technology to develop from (a) architecture being represented by computer to (b) computation being used to develop architecture and then further to where (c) architecture and the space-defining objects have computing attributes. Hence the study presented aims to consider and answer this key question: ‚ÄòWhen building components with computing capacity can define space and function as a computer at the same time, what are the constraints for the building components and what are the possible advantages for the built environment?‚Äô The conceptual framework, design and methods used in this research combine three fields: (a) hardware (architecture and design, electronic engineering) (b) software (content design and IT) and (c) interaction design (HCI and HRI). Architecture and urban design determinates the field of application. Media architecture and computer science provide the technological foundation, while the field of interaction design defines the methodology to link space and computing [5]. The conceptual starting point is to rethink the application of computers in architecture and, if architecture is capable of computing, what kind of methodology and structure would find an answer to the above core research question, and what are the implications of the question itself? The case study discusses opportunities for applying the Polymedia Pixel as an architectural component by testing it on: (a) constraint testing ‚Äì applying computational design methodologies to design space (b) singular testing - discussing the advantages for an individual building, and (c) plural testing ‚Äì investigating the potential for an urban context. The research aims to contribute to the field of knowledge through presenting first steps of a System < - > System mode where buildings can possibly watch and monitor each other, additional to the four primary interactive modes of operation. This investigation, its proposed hypothesis, methodology, implications, significance and evaluation are presented in the paper.
keywords	media architecture, computational environments, ubiquitous computing, interaction design, computer science
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20109103
id	ijac20109103
authors	Jun Chung, Daniel Hii; Malone-Lee Lai Choo
year	2011
title	Computational Fluid Dynamics for Urban Design: The Prospects for Greater Integration
source	International Journal of Architectural Computing vol. 9 - no. 1, 33-54
summary	Computational Fluid Dynamics (CFD) has always been used in the field of architecture, urban design and urban planning to understand the patterns of wind flow through the built environment. Its analysis is important to evaluate whether the natural ventilation through a site is adequate to mitigate heat and pollutant to achieve better human comfort in dense urban environments. However, given the complex operational requirements, the response to wind flow is not always done early enough to support planning and design. This paper seeks to illustrate how CFD analysis can aid planning and design of urban areas and investigates the workflow requirements, in the hope of making the CFD simulations more accessible to the practices and contribute to design decisions. It also looks at the present technological advancements and future prospects to assess the scenarios where emerging technologies can make CFD simulation more readily available with affordable and even mobile hardware installations.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2011_067
id	ecaade2011_067
authors	Kontovourkis, Odysseas
year	2011
title	Pedestrian Modeling as Generative Mechanism for the Design of Adaptive Built Environment
doi	https://doi.org/10.52842/conf.ecaade.2011.850
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.850-858
summary	The investigation of the relationship between pedestrian modeling and the built environment is essential in the process of analyzing, evaluating and generating new architectural spaces that can satisfy circulation design conditions and respect the surrounding environment in the best possible way. In order to achieve the direct interaction between the users and the environment, current work attempts to examine how pedestrian models can be used as generative mechanisms for the production of adaptive spaces, which can be optimized according to human movement behavior needs. In this investigation, an existing computer program will be further developed in relation to its ability to inform the environment in an adaptive manner resulting the formation of spaces that can influence and can be influenced by pedestrian movement behavior and hence circulation systems. This can be done by creating new rules of interaction between components, for instance between pedestrians and the geometry of environment, and by taking into account pedestrian movement behavior conditions, as well as functional and morphological architectural design criteria.
wos	WOS:000335665500098
keywords	Pedestrian modeling; virtual forces; generative design; adaptive built environment
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2011_021
id	caadria2011_021
authors	Lowe, Russell; Jules Cromarty and Richard Goodwin
year	2011
title	Real time modelling: A solution for accurate, updatable and real-time 3D modelling of as-built architecture
doi	https://doi.org/10.52842/conf.caadria.2011.219
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 219-228
summary	This paper describes a means for 3D modelling that sources photogrammetry data from publically available databases and integrates this data with a real time computer game application to construct point clouds. As the databases receive more data or as the data is updated the 3D visualisation within the computer game environment is capable of remodelling itself to reflect the changes, providing accurate representations of as-built infrastructure within an immersive 3D environment that can be interrogated and analysed in real time.
keywords	Real-time; photogrammetry; computer game; visualisation; point cloud
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2011_049
id	ecaade2011_049
authors	Marques, Luis Quelhas; Duarte, José P.; Jorge, Joaquim
year	2011
title	When form really follows function: Developing the prototype of a responsive exhibition pavilion
doi	https://doi.org/10.52842/conf.ecaade.2011.619
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.619-627
summary	The paper describes research developed with the aim of enquiring into the concepts of adaptability, transformation, and interactivity between the built space, its users and the surrounding environment to find appropriate responses to variations in spatial and functional needs, prompted by different uses and activities. After a look into the roots of kinetic architecture and a brief survey of the state of art, it presents the prototype of a responsive kinetic structure for a multi-purpose pavilion, concluding that by the integration of existing and emergent technologies, we now have the basic means to design and implement such structures.
wos	WOS:000335665500072
keywords	Architecture; kinetic; responsive; adaptability; interactivity
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cdrf2023_235
id	cdrf2023_235
authors	Mohsen Kafaei, Jane Burry, Mehrnoush Latifi, Joseph Ciorciari
year	2023
title	Designing a Systematic Experiment to Investigate the Effect of Ambient Smell on Human Emotions in the Indoor Space; Introducing a Mixed-Method Approach
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_20
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	Studies have indicated that built environments affect all aspects of human life such as emotion, perception, behavior, health, and well-being (Cooper et al. 2011). Built environments are formed from the combination and juxtaposition of visible and invisible environmental variables. In recent years, common techniques such as virtual reality, augmented reality, digital twins, and artificial intelligence have enabled researchers in the field of architecture and urban design to simulate environmental conditions to investigate the impacts of environmental variables on humans. However, the studies conducted in this field of human comfort are mostly focused on the impact of environmental variables such as form, temperature, humidity, and sound, and in fewer studies, up-to-date methods and technologies have been used to simulate and investigate the impact of smell on humans. Most of the studies that have investigated the effect of ambient smell on humans, carried out in the discipline of architecture and urban design, have used traditional tools and methods (questionnaire, interview, observation) rather than advanced technology and tools drawing on neuroscientific knowledge and technique to measure the effectiveness of the ambient smell on human. They have used unmasked scents or real-world environments rather than being able to simulate environmental conditions. This article highlights the significance and necessity of employing simulation methods to investigate the impact of environmental smells on humans. Additionally, it presents the methodology of an experiment for studying the effect of indoor environment smells (with a case study of an office environment in the initial phases) on human emotions, utilizing a mixed-method approach. Analysis of some parts of the data from this experiment showed that exposure to the fragrance of the jasmine flower pleasant (flower) and the odor of the rotten orange peel (unpleasant) can cause changes in the electroencephalography (EEG) power across different bands among participants.
series	cdrf
email
last changed	2024/05/29 14:04

_id	acadia11_260
id	acadia11_260
authors	Pak, Burak; Vrouwe, Ivo; Verbeke,Johan
year	2011
title	Design and Development of Low-cost Portable Immersive Spaces
doi	https://doi.org/10.52842/conf.acadia.2011.260
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 260-267
summary	In this paper, we will explore the potentials of low-cost portable immersive environments that combine textile structures, gesture-based interfaces and multiple projections. Our aim is to develop affordable, easy to set up, portable and inviting immersive spaces that can serve as an interface between a web-based geographic virtual environment, experts and lay people. In this context, after the introduction, we will review a variety of methods, conceptual tools and materials related to textile tectonics and techniques which can be individually used or combined for the development and construction of portable immersive spaces. In the next section, we will discuss the opportunities and challenges of using a low-cost gesture-based interface (Kinect) to support “touchless” interactions. Consequently, we will present the design alternatives of low-cost portable immersive spaces that we have synthesized from our background studies. This will be followed by the observations and findings from our prototype development, implementation and preliminary testing processes. In conclusion, we will discuss our conclusions and recommendations regarding the future development of low-cost portable immersive spaces.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	cf2011_p152
id	cf2011_p152
authors	Plume, Jim; Mitchell John
year	2011
title	An Urban Information Framework to support Planning, Decision-Making & Urban Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 653-668.
summary	This paper reports on a 2-year research project undertaken in collaboration with a state planning authority, a major city municipal council and a government-owned development organisation. The project has involved the design of an urban information model framework with the aim of supporting more informed urban planning by addressing the intersection where an individual building interfaces with its urban context. This adopted approach enables new techniques that better model the city and its processes in a transparent and accessible manner. The primary driver for this project was the challenge provided by the essential incompatibility between legacy GIS (geographic information system) datasets and BIM (building information model) representations of the built form. When dealing with urban scale information, GIS technologies use an overlay mapping metaphor linked to traditional relational database technologies to identify features or regions in the urban landscape and attach attribute data to those in order to permit analysis and informed assessment of the urban form. On the other hand, BIM technologies adopt an object-oriented approach to model the full three-dimensional characteristics of built forms in a way that captures both the geometric and physical attributes of the parts that make up a building, as well as the relationships between those parts and the spaces defined by the building fabric. The latter provides a far richer semantic structure to the data, while the former provides robust tools for a wide range of urban analyses. Both approaches are widely recognised as serving well the needs of their respective domains, but there is a widespread belief that we need to reconcile the two disparate approaches to modelling the real world. This project has sought to address that disjunction between modelling approaches. The UrbanIT project concentrated on two aspects of this issue: the development of a framework for managing information at the precinct and building level through the adoption of an object-oriented database technology that provides a platform for information management; and an exploration of ontology tools and how they can be adopted to facilitate semantic information queries across diverse data sources based on a common urban ontology. This paper is focussed on the first of those two agendas, examining the context of the work, the challenges addressed by the framework and the structure of our solution. A prototype implementation of the framework is illustrated through an urban precinct currently undergoing renewal and redevelopment, finishing with a discussion of future work that comes out of this project. Our approach to the implementation of the urban information model has been to propose extensions to ISO/PAS 16739, the international standard for modelling building information that is commonly known as IFC (Industry Foundation Classes). Our reason for adopting that approach is primarily our deep commitment to the adoption of open standards to facilitate the exchange of information across the built environment professions, but also because IFC is based on a robust object schema that can be used to construct a internet-accessible database able, theoretically, to handle the vast quantity of data needed to model urban-scale information. The database solution comes with well-established protocols for handling data security, integrity, versioning and transaction processing or querying. A central issue addressed through this work is concerned with level of detail. An urban information model permits a very precise and detailed representation of an urban precinct, while many planning analyses rely on simplified object representations. We will show that a key benefit of our approach is the ability to simultaneously maintain multiple representations of objects, making use of the concept of model view definitions to manage diverse analysis needs.
keywords	urban information modelling, geographic information systems, city models, interoperability, urban planning, open standards
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2014_092
id	ecaade2014_092
authors	Sherif Abdelmohsen
year	2014
title	A BIM-based Framework for Assessing Architectural Competition Entries
doi	https://doi.org/10.52842/conf.ecaade.2014.2.473
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 473-483
summary	Architectural competitions have been traditionally used to select best design practices. The basis of assessment for competitions has typically involved non-technical concepts of quality, subjective and emotional appreciations of experiences, and inseparable accord of formal, functional, aesthetic and contextual values (Rönn, 2011), rather than clear-cut objective and precisely measured values as in the engineering domain (Nashed, 2005; Nelson, 2006). Criteria for judgment usually focus on design parti and clarity of concept, novelty of architectural approach, context compliance, spatial organization, functional adaptability, economical solutions, and design flexibility. The assessment process, although presumably comprehensive and involving multiple evaluation techniques and resources, may still overlook important technical issues that may be fundamentally significant to the exclusion or approval of a given entry. This paper introduces a framework for assessing architectural competition entries aided by concepts of building information modeling (BIM).
wos	WOS:000361385100050
keywords	Building information modeling; architectural competitions; design evaluation; best practices; rule checking
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2020_181
id	ecaade2020_181
authors	Soltani, Sahar, Dias Guimaraes, Gabriela, Liao, Pan, Calixto, Victor and Gu, Ning
year	2020
title	Computational Design Sustainability: A Conceptual Framework for Built Environment Research
doi	https://doi.org/10.52842/conf.ecaade.2020.1.219
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 219-228
summary	This paper presents and demonstrates a "Computational Design Sustainability" (CDS) framework, inspired by "Computational Sustainability" (CS), which is a new area in computational research (C. Gomes & Yang, 2011). CS aims to apply techniques from computer science to address sustainability problems affecting a wide range of fields from environmental sciences to social studies. While CS has been broadly embraced in environmental science, the great potential of this concept to address grand challenges and solve complex problems seems to have not been adequately explored in the built environment domain. Therefore, this paper attempts to formally investigate the application of CS in built environment research addressing different scales of design problems with computational design through proposing the new concept of CDS . These approaches are demonstrated and evaluated through a range of projects collectively conducted by the research team. CDS proposes to advance computational deign research by creating a trade-off between pillars of sustainability in an integrated multifaceted and multidisciplinary approach. The presented conceptual framework provides a formal means to critically understand and further advance these approaches in a systematic way suitable for future development and broader application.
keywords	Computational Design Sustainability; Computational Sustainability; Computational Design; Sustainable Development; Built Environment Research
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2011_030
id	caadria2011_030
authors	Tan, Beng-Kiang and Jung-Ho Yeom
year	2011
title	Mirrored message wall: Bridging the real and virtual community
doi	https://doi.org/10.52842/conf.caadria.2011.311
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 311-320
summary	The Mirrored Message Wall is a cross-world digital public display located in both real and virtual world, for collective sharing of thoughts and messages and serves to connect the real world and virtual communities. The wall was installed at a university library foyer and concurrently at a 3D virtual campus for user studies. This paper presents its design, social factors considered in the design, implementation, and the findings of the user survey and observations. The results confirm that such an installation does encourage people to interact with each other and the results will inform a better design for the next version.
keywords	Virtual environment; second life; interactive message wall; public display; social interaction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2011_p124
id	cf2011_p124
authors	Verdonck, Evelien; Froyen Hubert
year	2011
title	Universal Design Patterns: Designing a Web-Based Tool with Architects
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 103-115.
summary	The implementation of Universal Design in design practice requires a number of tools that provide support to designers throughout the design process. In recent years, several studies have been carried out, determining methods to help designers select appropriate design support tools (DSTs), looking for desired data representation characteristics, or focusing on involving a wide range of users in the design process. This paper discusses how architects, as end-users of the DST, are involved in the development process of a new web-based tool based on the Universal Design Patterns concept. The Universal Design Pattern concept was developed based on Christopher Alexander‚Äôs Pattern Language, and looks at the possibility of using patterns to describe existing barriers in the built environment (conflicts), as well as design characteristics that may be implemented to make new designs more inclusive (resolutions). Through Universal Design Patterns, users can contribute new insights about the existing built environment, while architects can discuss the inclusive qualities of new design solutions or find useful design guidance. Involving the architects in developing the Universal Design Pattern concept into a web-based design tool is essential to establish a structure for the Universal Design Patterns that is compatible with the designers‚Äô way of thinking about design problems. Using the specific structure of Universal Design Patterns allows for the grouping of information into appropriately themed units on different levels of the design in a clear and uniform way. Building on the results of a survey involving 406 architects and a comparative study of existing DSTs for Universal Design, this paper first focuses on the results of a series of interviews that provided the basis for a first data-structure for the Universal Design Patterns tool. In addition to this, case-studies were carried out to ensure the new tool can easily be incorporated into the architects‚Äô design process. The results from both the interviews and the case-studies were combined in a preliminary model for the web-based tool. Finally, the methodology for testing this model with architects is discussed. In conclusion, some thoughts are given on the potential benefits of not only testing new DSTs with designers, but involving them actively from the early stages; or, in other words, the benefits of tools not only designed for architects, but with them.
keywords	Universal Design, Tools, Patterns
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: