Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 554

Reformat results as: short short into frame detailed detailed into frame

_id	acadia11_82
id	acadia11_82
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
doi	https://doi.org/10.52842/conf.acadia.2011.082
summary	With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2011_013
id	ecaade2011_013
authors	Fleischmann, Moritz; Lienhard, Julian; Menges, Achim
year	2011
title	Computational Design Synthesis: Embedding Material Behaviour in Generative Computational Processes
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.759-767
doi	https://doi.org/10.52842/conf.ecaade.2011.759
wos	WOS:000335665500088
summary	This paper presents strategies for the design of bending-active structures through the introduction of modern computational design methods, exploring their architectural potential through contemporary means of design, engineering and robotic manufacturing. As a case study the ICD/ITKE research pavilion’s information modeling process is depicted: how form-finding experiments guided the development of various models that synthesize data for design, simulation, analysis and fabrication. The paper explains the integration of relevant material information into generative computational design processes and concludes by comparing the resultant data models with a scan of the built prototype.
keywords	Computational Design; Bending-Active Structures; Robotic Fabrication; Computer-Aided Manufacturing; Information Modeling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_018
id	ecaade2011_018
authors	Grobman, Yasha J.; Ron, Ruth
year	2011
title	Digital Form Finding: Generative use of simulation processes by architects in the early stages of the design process
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.107-115
doi	https://doi.org/10.52842/conf.ecaade.2011.107
wos	WOS:000335665500012
summary	The paper presents performance oriented approaches to digital form finding which stems from the lines of research on performance and morphogenesis in architectural design. The main contribution to the earlier research is threefold; it examines the potential of the presented design processes to integrate interdisciplinary approach based on the use of simulation tools by architects or direct data exchange between simulation tools and design. Secondly, it explores new methods to generate initial architectural form based on performance information that apply to both building scale and urban scale, and lastly, it develops the theoretical framework on the ramifications of employing simulation technology and techniques in architectural design.
keywords	Form generation; performance; simulation; parametric design; form finding
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2011_017
id	caadria2011_017
authors	Hanafin, Stuart; Sambit Datta and Bernard Rolfe
year	2011
title	Tree facades: Generative modelling with an axial branch rewriting system
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 175-184
doi	https://doi.org/10.52842/conf.caadria.2011.175
summary	The methods and algorithms of generative modelling can be improved when representing organic structures by the study of computational models of natural processes and their application to architectural design. In this paper, we present a study of the generation of branching structures and their application to the development of façade support systems. We investigate two types of branching structures, a recursive bifurcation model and an axial tree based L-system for the generation of façades. The aim of the paper is to capture not only the form but also the underlying principles of biomimicry found in branching. This is then tested, by their application to develop experimental façade support systems. The developed algorithms implement parametric variations for façade generation based on natural tree-like branching. The benefits of such a model are: ease of structural optimization, variations of support and digital fabrication of façade components.
keywords	Parametric Modelling; Biomimicry; Lindenmayer Systems; Branching Structures
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	eaea2009_kardos_plachtinska
id	eaea2009_kardos_plachtinska
authors	Kardos, Peter; Petra Plachtinska
year	2011
title	Spatial Experience in Real & Virtual Environment as an Urban Design Tool
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 59-64
summary	The innovations of information technologies and the new possibilities of multimedia exploitation in the realm of architectural design and education are supporting the development of image communication methods on the basis of interactivity. The creative process of searching and decision-making in the urban design studio of our Faculty is supported by spatial modeling methods. The draft is sketched in modeling material on a working model. From the didactic point of view, relevant are mainly those phases, in which is possible, in the imaginative way, to support the searching and decision making process with the aim to test, compare and continuously evaluate the fulfillment of the hypothetic intentions of the solution responsibilities. The model becomes an interactive medium of cooperation between teacher and the working group of students. From the view of design crystallization, the dominant phases, in the creative process, are examining, verification, and simulation. The alternatives of material-compositional content and the spatial performance charts of modeled physical structure are verifying and the visual experience of the anticipated urban environment is simulated by the author, but also through the future client’s eyes. The alternation of the composition’s spatial configurations is generally appreciated by the static visual verification in the endoscopic horizon like the architectural spatial studies. The effective method of the progress generates a creative atmosphere for the generative thinking and design. The laboratory simulation of spatial experiences and their evaluation is performed following the perception psychology relations. The simulation of digestion of the new spatial reality intervenes the customer’s identification and guides to subjective approaches towards the quality and complexity of the formed environment. The simulation is performed in motion in order to be able to anticipate the dynamic continuity of subjective spatial imagination. The induced atmosphere will direct the evaluational attitudes of authors on comparison and selection of the successful alternatives. In our fee, we will present the demonstrations of selected static and dynamic notations of image sequences prepared in our laboratory. The presentations have been created in order to analyze, verify and offer imaginative support to creative findings in result of fulfilling the studio design tasks in the educational process. The main one is the design of urban spatial structures. The laboratory methodology is in the first place oriented on the analogue-digital procedures of "endoscope" model simulation. At the same time it also explores and looks for new unconventional forms of visual communication or archiving as imagination support to specialist and laymen participants in creative, valorization and approval processes.
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	acadia11_122
id	acadia11_122
authors	Pigram, David; McGee, Wes
year	2011
title	Formation Embedded Design: A methodology for the integration of fabrication constraints into architectural design
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 122-131
doi	https://doi.org/10.52842/conf.acadia.2011.122
summary	This paper presents a methodology for the integration of fabrication constraints within the architectural design process through custom written algorithms for fabrication. The method enables the translation from three-dimensional geometry, or algorithmically produced data, into appropriately formatted machine codes for direct CNC fabrication within a single CAD modeling environment. This process is traditionally one-way with part files translated via dedicated machine programming software (CAM). By integrating the toolpath creation into the design package, with an open framework, the translation from part to machine code can be automated, parametrically driven by the generative algorithms or explicitly modeled by the user. This integrated approach opens the possibility for direct and instantaneous feedback between fabrication constraints and design intent. The potentials of the method are shown by discussing the computational workflow and process integration of a diverse set of fabrication techniques in conjunction with a KUKA 7-Axis Industrial Robot. Two-dimensional knife-cutting, large-scale additive fabrication (foam deposition), robot-mounted hot-wire cutting, and robot-assisted rod-bending are each briefly described. The productive value of this research is that it opens the possibility of a much stronger network of feedback relations between formational design processes and material and fabrication concerns.
keywords	robotic fabrication; multi-axis; file-to-factory, open-source fabrication, parametric modeling, computational design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ijac20109204
id	ijac20109204
authors	Shepherd, Paul; Roly Hudson, David Hines
year	2011
title	Aviva Stadium: A parametric success
source	International Journal of Architectural Computing vol. 9 - no. 2, 167-186
summary	The Aviva Stadium, Dublin, is the first stadium to be designed from start to finish using commercially available parametric modelling software. A single model in Bentley’s Generative Components was shared between architects and engineers, which allowed the optimised design of form, structure and fac_ade. The parametric software was extended where necessary to integrate with structural analysis and to automate fabrication. By reducing the overhead associated with design iterations, this approach allowed detailed exploration of options and early identification and resolution of potential problems. In this paper, the authors add to the body of scientific knowledge by describing in detail the methods which led to the construction of the Aviva Stadium.This paper is written in light of the completed building and provides information on the generation and control of the envelope geometry, development and analysis of structure and documentation for construction.Whilst these components have been discussed independently previously [1–4], here these aspects are drawn together for the first time and are presented alongside thoughts on the manufacturing and construction processes from the project architect.
series	journal
last changed	2019/05/24 09:55

_id	ijac20109102
id	ijac20109102
authors	Yeung Wendy K.; Jeremy Harkins
year	2011
title	Digital Architecture for Humanitarian Design in Post-Disaster Reconstruction
source	International Journal of Architectural Computing vol. 9 - no. 1, 17-32
summary	Digital tools and computational design processes are rapidly changing architecture. Nonetheless their applications in humanitarian design remain under researched. Generative algorithmic design is particularly useful in humanitarian design and post disaster reconstruction. Firstly, the extreme conditions in these contexts pose many constraints that can be parametricised and form the basis of a parametric design. Secondly, optimal use of scarce resources are enabled by integrating these interrelated performance requirements. Thirdly, a robust model definition afforded through parametric modelling enables a mass customised design to adjust for different site and user requirements, and most importantly it allows improvements in subsequent design based on community evaluation. As part of an ongoing research in fusing advanced computational techniques in humanitarian architecture, the post-tsunami rebuilding program of Emergency Architects Australia in the Solomon Islands is presented as a case study to identify successes, opportunities and limitations of a system of digital tools.
series	journal
last changed	2019/05/24 09:55

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_012
id	caadria2011_012
authors	Biao, Li and Li Rong
year	2011
title	Searching generative methods based on building environments
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 123-132
doi	https://doi.org/10.52842/conf.caadria.2011.123
summary	Architectural contexts present both resources and restrictions from local spatial environment, such as factors of sunlight, landscape, line of sight, terrain and etc. They play important roles in architectural design. Following the traditional methods, it takes the architects lots of time to analyse the relative relationships. This paper takes terrain and sunlight into consideration to illustrate how to employ generative methods at the early stage of architectural design.
keywords	Terrain context; sunlight; multi-agent; genetic algorithm, evolve
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	b339
id	b339
authors	Bunster, Victor
year	2011
title	Tropism-oriented generative design: Analogical models for heterogeneous goal integration
source	Master of Philosophy (MPhil) Thesis. Faculty of Architecture, Building and Planning, The University of Melbourne.
summary	Architecture often requires integration between heterogeneous objectives. Both empirical requirements and speculative aspirations inform design in ways that resist ready formalization under computerizable logic. This thesis explores the possibilities of tropism-analogy as strategy for tackling some of these diverse objectives in a generative system. The feasibility of addressing heterogeneous goals with a computerizable design system is established by reviewing the role of rule-based strategies in vernacular tradition and the possibilities of analogies in recent generative methods. Then, the concept of tropism is analysed in depth, starting from its origins to its manifestation in a broad range of disciplines. This analysis leads to the definition of tropism as a ‘process of turn’ that enables purposeful connections between a system and its environment, an invariant property that may result in different levels of adaptation. These generalized conditions are used as conceptual foundation to explore analogical connections between divergent dimensions of architectural problems, and to define a feedback-enabled generative system that uses tropism-inspired rules in tackling contrasting design objectives. This system is implemented as a proof-of-concept for the Chilean social housing program, where is used to generate façade prototypes that respond simultaneously to thermal comfort and formal expression criteria. The outcomes of this thesis suggest that tropism-analogy can be used in tackling heterogeneous façade objectives and, therefore, to define novel design methods to explore goal-integration in computer-based generative architecture systems.
keywords	generative architecture, design computation, tropism analogy, goal integration, social housing
series	thesis:MSc
type	normal paper
email
more	http://dtl.unimelb.edu.au/R/98KH7M6SLEUI1J2GUA82K5A1AQSR7NK9HMI4GPCRJGFAEYDGHF-01472?func=dbin-jump-full&object_id=277253&local_base=GEN01&pds_handle=GUEST
last changed	2012/07/06 17:57

_id	sigradi2011_157
id	sigradi2011_157
authors	Burneo Valdivieso, Xavier Eduardo
year	2011
title	No es esto lo que hacen los arquitectos? Experiencias y aplicaciones de herramientas digitales en los talleres de diseño [Is not this what architects do? Experiences and applications of digital tools in design workshops]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 82-85
summary	This paper shows under the framework of research and teaching project developed at the Technical University of Loja, Ecuador, with the participation of students in the school of architecture, taking aim through the study of theory and a series exercises to strengthen the relationship between the methods of generative design and digital technologies in architectural projects from creation to completion display, to achieve better teaching and learning as the architect insert specific language in society and contemporary architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p165
id	cf2011_p165
authors	Chasznar, Andre
year	2011
title	Navigating Complex Models in Collaborative Work for (Sustainably) Integrated Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 619-636.
summary	Increasingly intensive use of computational techniques such as parametric-associative modeling, algorithmic design, performance simulations and generative design in architecture, engineering and construction are leading to increasingly large and complex 3D building models which in turn require increasingly powerful techniques in order to be manipulated and interpreted effectively. Further complexities are of course due also to the multi-disciplinary nature of building projects, in which there can be significant variation and even conflict among the aims of architects, engineers and builders, as well as owners, occupants and other stakeholders in the process. Effective use of model information depends to a large extent on sense-making, which can in some ways be helped but also hindered by schemes for organizing the information contained. Common techniques such as layering, labeling (aka ‚Äòtagging‚Äô) and assignment of various other attributes to model objects have significant limitations ‚Äì especially those arising from general problems of language, ontology and standardization, as well as but distinct from issues of interoperability ‚Äì both with respect to locating the desired items in a 3D building model and also with respect to displaying the objects in informative ways which effectively assist collaborative design and decision-making. Sustainable design in particular is an area generally requiring a high level of inter-disciplinary collaboration to achieve highly integrated designs which make multiple use of the elements and systems incorporated (though integrated design may also be pursued without explicit aims of sustainability). The proposed paper describes ongoing research concerning alternatives to the currently common techniques for locating and displaying information in 3D building models in support of sense-making to promote collaborative and integrated design. These alternatives comprise on the one hand interactive geometric-content-based methods for search and classification of model objects ‚Äì as an alternative or complement to common assigned-attribute-based methods ‚Äì and on the other hand visual analytic techniques ‚Äì in contrast to existing, relatively static tabular and "physical" views ‚Äì which can help to increase the informativeness of the geometric data within the model, as well as the non-geometric data that is attached to geometric objects (e.g. as in the cases of BIM and various types of CAE performance simulations). Tests undertaken with architects and engineers in practice and academia to evaluate the proposed methods are also described. Finally conclusions are drawn regarding these methods‚Äô positive present performance and some of their shortcomings, as well as indicating directions for future research concerning the methods‚Äô refinement and extension to help 3D building models become more effective components of the design process than they are at present, both with respect to these models‚Äô present levels of complexity and especially with respect to their anticipated increasing complexity in future.
keywords	CAD/CAE/BIM, content-based search, visual analytics
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_114
id	ecaade2011_114
authors	Droste, Stephan
year	2011
title	Turmitecture: A generic approach for autonomous topological generation
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.558-562
doi	https://doi.org/10.52842/conf.ecaade.2011.558
wos	WOS:000335665500064
summary	The paper describes and discusses a generic approach for generative design by Turing Machines operating on a three-dimensionally folded surface. It is part of an on going research on concurrent cooperative design processes in architecture. During the development of systems for simplified generic interaction in spatial design, it turned out that the basic operations are applicable to be processed by non-sophisticated automata. If the spatial configuration is interpreted as the medium for an ordinary state machine, the whole system adds up to a kind of Turing Machine. Since 2D-Turing Machines are often referred to as “turmites”, and the proposed system is based on a yet three-dimensional folded, but still twodimensional surface - the automaton will be called “Turmitect”.
keywords	Collaborative Design; Generative Design; Design Concepts; Shape Studies; Virtual Architecture
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p075
id	cf2011_p075
authors	Janssen, Patrick; Chen Kian Wee
year	2011
title	Visual Dataflow Modelling: A Comparison of Three Systems
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 801-816.
summary	Visual programming languages enable users to create computer programs by manipulating graphical elements rather than by entering text. The difference between textual languages and visual languages is that most textual languages use a procedural programming model, while most visual languages use a dataflow programming model. When visual programming is applied to design, it results in a new modelling approach that we refer to 'visual dataflow modelling' (VDM). Recently, VDM has becoming increasingly popular within the design community, as it can accelerate the iterative design process, thereby allowing larger numbers of design possibilities to be explored. Furthermore, it is now also becoming an important tool in performance-based design approaches, since it may potentially enable the closing of the loop between design development and design evaluation. A number of CAD systems now provide VDM interfaces, allowing designers to define form generating procedures without having to resort to scripting or programming. However, these environments have certain weaknesses that limit their usability. This paper will analyse these weaknesses by comparing and contrasting three VDM environments: McNeel Grasshopper, Bentley Generative Components, and Sidefx Houdini. The paper will focus on five key areas: * Conditional logic allow rules to be applied to geometric entities that control how they behave. Such rules will typically be defined as if-then-else conditions, where an action will be executed if a particular condition is true. A more advanced version of this is the while loop, where the action within the loop will be repeatedly executed while a certain condition remains true. * Local coordinate systems allow geometric entities to be manipulated relative to some convenient local point of reference. These systems may be either two-dimensional or three-dimensional, using either Cartesian, cylindrical, or spherical systems. Techniques for mapping geometric entities from one coordinate system to another also need to be considered. * Duplication includes three types: simple duplication, endogenous duplication, and exogenous duplication. Simple duplication consists of copying some geometric entity a certain number of times, producing identical copies of the original. Endogenous duplication consist of copying some geometric entity by applying a set of transformations that are defined as part of the duplication process. Lastly, exogenous duplication consists of copying some geometric entity by applying a set of transformations that are defined by some other external geometry. * Part-whole relationships allow geometric entities to be grouped in various ways, based on the fundamental set-theoretic concept that entities can be members of sets, and sets can be members of other sets. Ways of aggregating data into both hierarchical and non-hierarchical structures, and ways of filtering data based on these structures need to be considered. * Spatial queries include relationships between geometric entities such as touching, crossing, overlapping, or containing. More advanced spatial queries include various distance based queries and various sorting queries (e.g. sorting all entities based on position) and filtering queries (e.g. finding all entities with a certain distance from a point). For each of these five areas, a simple benchmarking test case has been developed. For example, for conditional logic, the test case consists of a simple room with a single window with a condition: the window should always be in the longest north-facing wall. If the room is rotated or its dimensions changed, then the window must re-evaluate itself and possibly change position to a different wall. For each benchmarking test-case, visual programs are implemented in each of the three VDM environments. The visual programs are then compared and contrasted, focusing on two areas. First, the type of constructs used in each of these environments are compared and contrasted. Second, the cognitive complexity of the visual programming task in each of these environments are compared and contrasted.
keywords	visual, dataflow, programming, parametric, modelling
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2013_080
id	caadria2013_080
authors	Koh, Immanuel
year	2013
title	Computer Vision and Augmented Reality Technologies in Experimental Architectural Design Education at the AA
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 427-436
doi	https://doi.org/10.52842/conf.caadria.2013.427
wos	WOS:000351496100042
summary	This paper aims to investigate the potential of both open source software and new media (esp. computer vision and augmented reality) as tools for architectural design and education. The examples illustrated in the paper would be drawn mainly from students’ projects done as part of their AA Media Studies Course submission at the AA School of Architecture (AA) during the academic years from 2011/2012 to 2012/2013. The paper outlines the main approaches, which students have chosen to implement, both directly and indirectly, these new media and tools into their studio work at the AA. Section 1 briefly introduces a range of currently available open source computational design toolkits that are deemed useful for quick implementation of computer vision and augmented reality technologies. The related programming languages, softwares and hardwares would also be introduced and described accordingly. Sections 2 and 3 are accompanied with a visual catalogue of students’ projects to better illustrate the diversity in the understanding and implementation of computer vision and augmented reality technologies in architectural design. Section 4 serves to conclude the paper by first discussing briefly the feedback from students at the end of the course before clarifying the context of the research and thus its relation to recent work done by others using similar technologies.
keywords	Computer vision, Augmented reality, Generative design, Interaction design
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2011_008
id	ecaade2011_008
authors	Kolovou, Eleni
year	2011
title	Sensitive skin design: a generative approach
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.453-460
doi	https://doi.org/10.52842/conf.ecaade.2011.453
wos	WOS:000335665500052
summary	This paper presents a framework of study of an iterative evolution of a modular component designed in an attempt to simulate material constraints and motional response with the perspective to be multiplied into a dynamic system. The main scope of this project was to investigate the process that maps a territory of possibilities, among which lies the potential architectural solution. In order to explore this field a parametric model has been developed. The simulation of the materials nature has been embedded in the algorithm on a geometry constraint basis in an attempt to simulate the behavior of the system comprised by elements in tension and torsion. A multiplication process of the module was introduced at a following stage of the research focusing on regular tessellations and circle packing on the plane. Responsive performance has been studied on a selected specimen of the evolution given a hypothetic context scenario according to which the scale of the design was set at a façade component level. The resulting responsive permeable skin was presented as a potential design solution among the successive approximations of this algorithm. Along the course of the research the parametric tools were used not only as a medium of synchronous output visualization but also as a mechanism to simulate material properties, structural constrains, environmental data, and worked as stimuli of inspiration driving the overall design process.
keywords	Parametric design; generative design; simulation and visualization; responsive skin
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_067
id	ecaade2011_067
authors	Kontovourkis, Odysseas
year	2011
title	Pedestrian Modeling as Generative Mechanism for the Design of Adaptive Built Environment
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.850-858
doi	https://doi.org/10.52842/conf.ecaade.2011.850
wos	WOS:000335665500098
summary	The investigation of the relationship between pedestrian modeling and the built environment is essential in the process of analyzing, evaluating and generating new architectural spaces that can satisfy circulation design conditions and respect the surrounding environment in the best possible way. In order to achieve the direct interaction between the users and the environment, current work attempts to examine how pedestrian models can be used as generative mechanisms for the production of adaptive spaces, which can be optimized according to human movement behavior needs. In this investigation, an existing computer program will be further developed in relation to its ability to inform the environment in an adaptive manner resulting the formation of spaces that can influence and can be influenced by pedestrian movement behavior and hence circulation systems. This can be done by creating new rules of interaction between components, for instance between pedestrians and the geometry of environment, and by taking into account pedestrian movement behavior conditions, as well as functional and morphological architectural design criteria.
keywords	Pedestrian modeling; virtual forces; generative design; adaptive built environment
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_046
id	ecaade2011_046
authors	Kudumovi_, Lana; Taso, Amra; Hasanbegovi_, Omer
year	2011
title	Digital design and fabrication: Case study: seashell
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.779-787
doi	https://doi.org/10.52842/conf.ecaade.2011.779
wos	WOS:000335665500090
summary	Computational aspects of architectural design have revolutionized actual process, and have made a new platform for cooperation that spans across all disciplines. The focus of this study is to understand how the seashell form can be applicable in design process of human architectures. Our approach will show the act of choosing an inspirational natural form and its application into the virtual world, then digitalization, transformation, and evaluation of the form that are suitable for human architecture. 3D model generating would be performed by doing the scan of a selected seashell form. Further action would be to import the object as a tool in the Zbrush application, and continued modeling transformations. This phase would include other parameters that need to be integrated during the architectural design process since architecture usually exists in a radically different environment in comparison with the seashell.
keywords	Complexity; architectural form; generative design; digital design fabrication; rapid prototyping
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ijac20109203
id	ijac20109203
authors	Martini, Kirk
year	2011
title	Optimization and parametric modelling to support conceptual structural design
source	International Journal of Architectural Computing vol. 9 - no. 2, 151-166
summary	The paper describes software combining parametric geometric modeling with a version of the harmony search method, modified to support multimodal structural optimization. Researchers have recognized the potential of population-based optimization methods, such as genetic algorithms, to support multimodal optimization: that is, generating a diverse range of good alternative solutions, rather than a single best solution. Among these methods is the harmony search method, which has been demonstrated to be efficient in many unimodal structural optimization problems. The paper describes a new version of the harmony search method, implemented as an assembly within Bentley's Generative Components, enabling high-level control of geometry. The new method is demonstrated on an bridge supported by two inclined parabolic arches, a structure where GC controls a complex geometry with a single variable. Comparative studies of the example find that the new method is more effective than conventional harmony search in consistently finding multiple good solutions.
series	journal
last changed	2019/05/24 09:55

For more results click below: