Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 540

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_107
id	ecaade2011_107
authors	Peters, Brady; Tamke, Martin; Nielsen, Stig Anton; Andersen, Søren Vestbjerg; Haase, Mathias
year	2011
title	Responsive Acoustic Surfaces: Computing Sonic Effects
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.819-828
doi	https://doi.org/10.52842/conf.ecaade.2011.819
wos	WOS:000335665500094
summary	Acoustic performance is defined by the parameter of reverberation time; however, this does not capture the acoustic experience in some types of open plan spaces. As many working and learning activities now take place in open plan spaces, it is important to be able to understand and design for the acoustic conditions of these spaces. This paper describes an experimental research project that studied the design processes necessary to design for sound. A responsive acoustic surface was designed, fabricated and tested. This acoustic surface was designed to create specific sonic effects. The design was simulated using custom integrated acoustic software and also using Odeon acoustic analysis software. The research demonstrates a method for designing space- and sound-defining surfaces, defines the concept of acoustic subspace, and suggests some new parameters for defining acoustic subspaces.
keywords	Architectural Acoustics; Performance-Driven Design; Parametric Design; Digital Fabrication
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p120
id	cf2011_p120
authors	Veliz, Alejandro; Medjdoub Benachir, Kocaturk Tuba
year	2011
title	Bridging the Gap in Constraint-Based Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 133-148.
summary	Mass customization is one of the most promising computational developments in the AEC industry. Despite recent advances in the production of research-based knowledge, the professional practices lack of a consistent and permanent technology adoption scheme and remain as a very resilient and fragmented industry. This work is a part of an ongoing research project developing guidelines for improving both physical and virtual modeling processes within an architectural design context. Here, we present a customizable model of a space layout explorer. The implementation of the user-driven solution-finding process is based on constraint technology embedded in Autodesk’s Revit® 2011 macros tools, commonly used in the professional practice. The aim of this work is to demonstrate a practical use of a small constraint-based system on software of widespread use. Even though there is still a lack of building information, the model has already several applications in the definition a floor plan layout and in the comparison of several instances of the design solution in the 3D user view. User-driven modifications are not made directly through the 3D model, but through different explicit text tags that describe each parameter on 2D views -although a real time 3D visualization of the model is also available-. The main findings are discussed as guidelines for further research on the end-user involvement on a ‘creative mass customization’ scheme. Also, the implementation of visual aids such as text tags during the customization process can bridge some technical obstacles for the development of interfaces for constraint-based mass customization systems. Before the final discussion, some limitations on the use of this model are described.
keywords	collaborative design, mass customization, reality gap
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadiaregional2011_020
id	acadiaregional2011_020
authors	Hudson, Roly; Drew MacDonald, Mark Humphreys
year	2011
title	Race track modeler. Developing an Iterative Design Workflow Combining a Game Engine and Parametric Design
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.v2b
summary	This paper documents the continuing development and testing of a novel digital work flow established and implemented for the design and redevelopment of formula one racing tracks. The Race Track Modeler (RTM) tool uses a game engine to simulate driving around proposed track designs. Performance data from the simulation is combined with real data acquired from analysis of vehicle mounted accident data recorders (ADRs). The output of the tool is a graphical representation of simulated stopping positions of vehicles that have lost control and left the track. This information directly informs the design of motor racing facilities; the zoning of spectator facilities, position and specification of crash barriers (if required), and surface material selection for the run-off zones (the area where vehicles are expected to stop after losing control and leaving the track). The RTM can suggest further design changes to the track geometry which are then fed back into the game engine. The project involves methods of binding analysis of design directly to geometry together with input from interactive controls. The RTM has been developed and tested during the redevelopment of Silverstone race track in the United Kingdom (figure 1) this paper documents the current state of the tool and concludes with proposed future developments.
series	ACADIA
last changed	2022/06/07 07:49

_id	acadiaregional2011_027
id	acadiaregional2011_027
authors	Meniru, Kene
year	2011
title	Modeling Building Information in a Parametric Environment
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.b9s
summary	The building design stage starts with an early effort by the architect to create a sketch which embodies the fundamental building knowledge that forms the basis for all later work. This knowledge is mostly lost in current building design practice procedures where the sketch is reduced to individual building components such as walls, floors, etc. By the time the building is constructed, new efforts have to be made to document information about the building necessary to control and maintain it during operation. This paper represents the next step to a Ph.D. study that describes the early building process and important features to support. It presents a sample design session from the study and based on observations from this session, it identifies and describes important digital objects that can be used to capture building knowledge in the sketch.
series	ACADIA
last changed	2022/06/07 07:49

_id	caadria2011_048
id	caadria2011_048
authors	Webb, Nicholas and Andrew Brown
year	2011
title	Digital forensics as a tool for augmenting historical architectural analysis: Case study: The student work of James Stirling
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 505-514
doi	https://doi.org/10.52842/conf.caadria.2011.505
summary	Digital techniques in architecture have developed rapidly over the last 25 years. This has enabled digitally mediated visualisations to become increasingly complex, and potentially more beneficial to the user. In architectural critique this creates an opportunity to reanalyse and re-interpret paper and photographic records of architectural artefacts. The information available to construct models of lost or unbuilt designs is almost always incomplete; therefore interpretation of material requires parallel study into the architect, their influences and the contemporary context they operated within. This can prove to be a rich exercise in augmenting a critical architectural analysis of an architect, a built product or building type. The process of constructing a model and its subsequent analysis can be referred to as scenario building, or informed extrapolation. This paper uses the reconstruction of an unbuilt scheme by Sir James Stirling as a vehicle to explore and illustrate the techniques, implications and limitations of the process.
keywords	Forensic analysis; digital modelling; scenario building; virtual reconstruction
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2011_129
id	ecaade2011_129
authors	Webb, Nicholas; Brown, Andre
year	2011
title	Augmenting critique of lost or unbuilt works of architecture using digitally mediated techniques
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.942-950
doi	https://doi.org/10.52842/conf.ecaade.2011.942
wos	WOS:000335665500108
summary	The paper explores how digital techniques can be applied to lost or unbuilt works of architecture in order to enhance our understanding of a particular architect or building they designed. For example, if current knowledge of a historic design is based on surviving literature or fragmented images, the new arrangement introduced using digitally augmented techniques allows a clearer reading of these original sources. Case study examples are used to demonstrate how this is achieved.
keywords	Virtual construction; forensic analysis; digital modelling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2016_046
id	ascaad2016_046
authors	Albarakat, Reem; Gehan Selim
year	2016
title	Radicalism vs. Consistency - The Cyber Influence on Individuals’ Non-Routine Uses in the Heritage Public Spaces of Cairo
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 451-460
summary	Since the emergence of the concept of user-generated content websites – Web 2.0, Internet communications have developed as a powerful personal and social phenomenon. Many Internet applications have become partially or entirely related to the concept of social network; and cyberspace has become a space about ‘us’ not ‘where’ we are. This paper investigates the theoretical grounds of the effect of cyber experience on changing the individuals’ uses of the public spaces, and sustaining this change through maintaining the ties and reciprocal influence between actions in physical and cyber spaces. It aims at examining the impact of cyber territories on the perception, definition and effectiveness of personal space within different circumstances; and its role in changing the uses of spaces where people used to act habitually. The personal space, here, will be represented as the core of both: change and consistency – the space of bridging the reciprocal effect of cyber and physical counterparts, which is transformed through the experience of physical events mediated into the cyberspace. The paper is part of a study which looks at the case of Tahrir Square during the Egyptian political movement in 2011. We will compare the activists’ actions and practices in the Square during different events of non-routine use of the square and its surroundings. The case study will show the level of consistency in the features of the produced personal space within different waves of the revolutionary actions for all that different circumstances, motivations and results.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	sigradi2011_264
id	sigradi2011_264
authors	Araneda, Claudio
year	2011
title	Hacia un Estudio del Protofenómeno Urbano: Rudimentos Analíticos para una Aproximación Fenoménica al Estudio de la Percepción de Seres Humanos en el Espacio Urbano [Towards a Study of the Urban Protophenomenon: Analytical Rudiments for a Phenomenological Approximation to the Study of the Perception of Human Beings in Urban Space]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 534-537
summary	This work outlines the theoretical and methodological framework for the development of analytical rudiments contributing to the registry, cartography and quantification of the urban phenomenon understood not as urban space perception but rather, as human beings perception within urban space. It argues that this approach to urban studies is part of a scarcely explored lineage within the field of urban analysis. One that, much in the same way as the widely used topological/ structural approach, reveals key quantifiable information, mainly, in terms of real or effective density and therefore, of high value for the design of micro and meso urban scales.
keywords	Urban phenomenon; urban protophenomenon; phenomenology, urban analysis, space syntax
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_198
id	sigradi2011_198
authors	Aroztegui Massera, Carmen
year	2011
title	La cámara en la animación de arquitectura. Reconsiderando “la mirada” y el régimen de mostración en el cine [The Camera in Architectural Animation. Reconsidering “The Gaze” and The Registration Regime in the Cinema]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 432-435
summary	Even though inspired by cinema, architecture animations often oversimplify filmic space, and conflate two distinct concepts: gaze, and vision. Such misinterpretation leads to overuse camera movement to present spaces as if the change of point of view would lead to communicate lived space. This article introduces such discussion in the context of the tableau vivant, a living picture, explores the use of the shot sequence and the use of non-narrative scenes.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2011_021
id	ecaade2011_021
authors	Asanowicz, Aleksander
year	2011
title	Digital “serial vision” - new approach in urban composition teaching
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.716-724
doi	https://doi.org/10.52842/conf.ecaade.2011.716
wos	WOS:000335665500083
summary	The paper discusses the following problem: How can digital technology are integrated with urban composition teaching to provide a better understanding of the aesthetical and emotional aspects of the city? It argues for the current need for an integration of computer modelling and the approaches developed form the work of K. Lynch, G. Cullen, R. Krier, F. Ching. The paper is based on the experience in design studio teaching and an experiment completed with students. The exercise shows the students that different spatial organization may cause different emotions according to the treatment of space-defining elements. The paper presents the background and context as well as describes the experimental environment and the student work.
keywords	Urban composition; serial vision; computer animation
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ascaad2016_013
id	ascaad2016_013
authors	Belkis Öksüz, Elif
year	2016
title	Parametricism for Urban Aesthetics - A flawless order behind chaos or an over-design of complexity
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 105-112
summary	Over the last decade, paradigm shifts in the philosophy of space-time relations, the change from space-time to spatio-temporality, caused significant changes in the design field, and introduced new variations and discourses for parametric approaches in architecture. Among all the discourses, parametricism is likely the most spectacular one. The founder of parametricism, Patrik Schumacher (2009) describes it as “a new style,” which has “the superior capacity to articulate programmatic complexity;” and “aesthetically, it is the elegance of ordered complexity in the sense of seamless fluidity.” In its theoretical background, Schumacher (2011) affiliates this style with the philosophy of autopoiesis, the philosophy that stands between making and becoming. Additionally, parametricism concerns not only the physical geometry in making of form; but also discusses the relational and causal aspects in becoming of form. In other words, it brings the aesthetic qualities in making through the topological intelligence behind becoming. Regarding that, parametricism seems an effective way of managing /creating complex topologies in form-related issues. However, when it comes to practice, there are some challenging points of parametricism in large-scale design studies. Thus, this work underlines that the dominance of elegance for urban planning has the potential of limiting the flexible and dynamic topology of the urban context, and objectifying the whole complex urban form as an over-designed product. For an aesthetic inquiry into urban parametricism, this paper highlights the challenging issues behind the aesthetic premises of parametricism at the urban design scale. For that, Kartal Master Plan Design Proposal by Zaha Hadid Architects (2006) will be discussed as an exemplary work.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	cf2011_p098
id	cf2011_p098
authors	Bernal, Marcelo; Eastman Charles
year	2011
title	Top-down Approach for Interaction of Knowledge-Based Parametric Objects and Preliminary Massing Studies for Decision Making in Early Design Stages
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 149-164.
summary	Design activities vary from high-degree of freedom in early concept design stages to highly constrained solution spaces in late ones. Such late developments entail large amount of expertise from technical domains. Multiple parallel models handle different aspects of a project, from geometric master models to specific building components. This variety of models must keep consistency with the design intent while they are dealing with specific domains of knowledge such as architectural design, structure, HVAC, MEP, or plumbing systems. Most of the expertise embedded within the above domains can be translated into parametric objects by capturing design and engineering knowledge through parameters, constraints, or conditionals. The aim of this research is capturing such expertise into knowledge-based parametric objects (KPO) for re-usability along the design process. The proposed case study ‚Äì provided by SOM New York‚ is the interaction between a massing study of a high-rise and its building service core, which at the same time handles elevators, restrooms, emergency stairs, and space for technical systems. This project is focused on capturing design expertise, involved in the definition of a building service core, from a high-rise senior designer, and re-using this object for interaction in real-time with a preliminary massing study model of a building, which will drive the adaption process of the service core. This interaction attempts to provide an integrated design environment for feedback from technical domains to early design stages for decision-making, and generate a well-defined first building draft. The challenges addressed to drive the instantiation of the service core according to the shifting characteristics of the high-rise are automatic instantiation and adaptation of objects based on decision rules, and updating in real-time shared parameters and information derived from the high-rise massing study. The interaction between both models facilitates the process from the designer‚Äôs perspective of reusing previous design solutions in new projects. The massing study model is the component that handles information from the perspective of the outer shape design intent. Variations at this massing study model level drive the behavior of the service core model, which must adapt its configuration to the shifting geometry of the building during design exploration in early concept design stages. These variations depend on a list of inputs derived from multiple sources such as variable lot sizes, building type, variable square footage of the building, considerations about modularity, number of stories, floor-to-floor height, total building height, or total building square footage. The shifting combination of this set of parameters determines the final aspect of the building and, consequently, the final configuration of the service core. The service core is the second component involved in the automatic generation of a building draft. In the context of BIM, it is an assembly of objects, which contains other objects representing elevators, restrooms, emergency stairs, and space for several technical systems. This assembly is driven by different layouts depending on the building type, a drop-off sequence, which is the process of continuous reduction of elevators along the building, and how this reduction affects the re-arrangement of the service core layout. Results from this research involves a methodology for capturing design knowledge, a methodology for defining the architecture of smart parametric objects, and a method for real-time-feedback for decision making in early design stages. The project also wants to demonstrate the feasibility of continuous growth on top of existing parametric objects allowing the creation of libraries of smart re-usable objects for automation in design.
keywords	design automation, parametric modeling, design rules, knowledge-based design
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2018_1359
id	sigradi2018_1359
authors	Bertola Duarte, Rovenir; Ziger Dalgallo, Ayla; Consalter Diniz, Maria Luisa; Romão Magoga, Thais
year	2018
title	A window to the autism: the political role of the difference of an objectile in the homogeneous school
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 848-853
summary	This paper approaches the insertion of an objectile in the homogeneous space of a school, looking to bring flexibility and responsiveness to assist a user with Autism Spectrum Disorder (ASD). The research concerns with photosensitivity, a problem faced by almost 25% of the children with autism (Miller-Horn; Spence; Takeoka, 2011). The study is based on the theories for ASD environments that speak of ‘sensorial perception’ and ‘thinking with imagery’ (Mostafa, 2008), and the coexistence of Sensory Design Theory and Neuro-Typical Method (Pomana, 2015). The result consists of a gadget developed in MIT App Inventor tool and a curtain that interact responsively through an Arduino code, for a new connection between the user and his surroundings.
keywords	Objectile; Responsive Architecture; Architecture and autism; ASD; Inclusive school
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	cf2011_p092
id	cf2011_p092
authors	Bittermann, Michael S.
year	2011
title	Sustainable Conceptual Building Design using a Cognitive System
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 297-314.
summary	A cognitive system for conceptual building design is presented. It is based on an adaptive multi-objective evolutionary algorithm. The adaptive approach is novel and, in contrast with conventional multi-objective evolutionary algorithms, it explores the solution space effectively, while maintaining diversity among the solutions. The suitability of the approach for conceptual design of a multi-purpose building complex is demonstrated in an application. In the application, the goal of maximizing sustainability is treated by means of a model, which is established using neural computations. The approach is found to be suitable for treating the soft nature of the sustainability concept. Also, the capability of the approach to compare the performance of alternative solutions from an unbiased viewpoint, i.e. without committing a-priori to a relative importance among the performance aspects, is demonstrated.
keywords	computational design, sustainable design, adaptive evolutionary algorithm, Pareto optimality, neural computation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_136
id	ecaade2011_136
authors	Bohnenberger, Sascha; de Rycke, Klaas; Weilandt, Agnes
year	2011
title	Lattice Spaces: Form optimisation throgh customization of non developable 3d wood surfaces
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.751-758
doi	https://doi.org/10.52842/conf.ecaade.2011.751
wos	WOS:000335665500087
summary	This paper discusses a collaborative project by RDAI architects, Bollinger+Grohmann and the timber construction company Holzbau Amann. The project is located in a former swimming pool in Paris and it is part of the new interior of a flagship store of the French fashion label Hermes. In late 2009, Rena Duma Architects, asked Bollinger+Grohmann to collaborate as structural engineers on a challenging design proposal within a very short timeframe. Three wooden lattice structures, the so-called “bulle” and one monumental staircase with a similar design approach characterize the interior of the new flagship store. The lattice structures are dividing the basement into different retail spaces. They vary in height (8-9 m) and diameter (8-12 m) and have a free-form shaped wicker basket appearance. Wood was the chosen material for these structures to strengthen the idea of the wickerbaskets and to create an interior space with a sustainable and innovative material.
keywords	Digital production; parametric design; mass customization; wood; digital crafting
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_366
id	sigradi2011_366
authors	Braida, Frederico; Nonima, Vera L.
year	2011
title	A representação das cidades na era da cultura digital: ampliação, consumo e produção das cidades no ciberespaço [The representation of cities in the era of digital culture: expansion, consumption and production of cities in cyberspace ]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 320-323
summary	This article presents a study on the representation of cities in the era of digital culture and aims to show how the phenomenon of self-production is present in the websites studied. At the end, we conclude that cities (through city marketing), local government (through advertising and through the creation of an identity) and citizens (through selfbranding), they create a rhetorical itself and constitute itself as brands. Therefore, we conclude that cybercities has been more an extended space of consumption and production of cities, municipalities and citizens.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	eaea2009_breen
id	eaea2009_breen
authors	Breen, Jack
year	2011
title	Unravelling Form and Space in Architecture – Visualisation Approaches in Design Artefact Study Initiatives
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 89-98
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	sigradi2011_356
id	sigradi2011_356
authors	Bustos Lopez, Gabriela; González, Giscard; Rincón, Francisco
year	2011
title	Arquitectura Interactiva, reacción, comportamientos y transformaciones en el Programa de Diseño Digital [Interactive architecture, reaction, behaviors and transformations in the Digital Design Program]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 171-175
summary	This paper shows an academic strategy of production in the Interactive Architecture´s Mention of the Digital Design Diploma from the School of Architecture and Design at the University of Zulia, like weaves of reactions in the process of creation in the virtual space in 3D, and its establishment like interactive architectonic devices, jointly with a conceptual exposition that is based on the interactivity definition from the complex epistemology vision. It is the manifestation of an academic experience developed within the framework of both theoretical and practice exposition, based on the complex epistemology of the design with digital technology.
keywords	Architecture, interactivity; digital design; intelligent behaviors
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_000
id	sigradi2011_000
authors	Chiarella, Mauro; Tosello, Maria Elena (eds.)
year	2011
title	Sigradi 2011: Augmented Culture
source	Proceedings of the 15th Iberoamerican Congress of Digital Graphics Graphics / ISBN 13: 978-987-657-679-6] Argentina - Santa Fe 16-18 November 2011, 579 p.
summary	“Augmented Culture” talks about a combination of interdependent social and technological meanings in a complex, multiple, interactive and interconnected context. It acknowledges that a new social and cultural paradigm is being developed as the old barriers of time, space and language are ruptured and transcended. In our knowledge-based civilization, we inhabit interconnected societies where new relational forms are configured. Additionally, cultural expressions have been qualitatively augmented starting from their integration with information and communication technologies, which have dramatically enhanced not only their creative and reflective processes, but also the realization and construction of cultural objects. In this sense, an “Augmented Culture” compels us to investigate the wide and complex spectrum of the variables that express the interdisciplinary, collective and participative constructions of our present age, so strongly related to visual culture, information culture and interface culture. Thus, we consider it necessary to concentrate, to expand, to spread and to share exploratory, descriptive or explanatory experiences and productions of such phenomena. The attempt is to define a multidimensional theoretical framework that while recognizing today’s state-of-the-art and tendencies, it provides us with a critical viewpoint.
series	other
type	normal paper
email
last changed	2011/12/30 18:05

For more results click below: