Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 200

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2011_071
id	caadria2011_071
authors	Huang, Weixin; Weiguo Xu and Tao Wang
year	2011
title	Structural form generation using interactive genetic algorithm
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 751-760
doi	https://doi.org/10.52842/conf.caadria.2011.751
summary	Structural form design could be considered as a bi-objective problem which should satisfy both the efficiency criterion of structural engineering and the aesthetic criteria of architects. This research tries to introduce Interactive Genetic Algorithm (IGA) in the problem of structural form design. It combines the structural analysis performed by computer and aesthetic evaluation by architects into a bi-objective IGA process, in order to generate structural forms which are preferred by the architects and at the same time structurally optimal. In this research, the structure generated consists of two kinds of members, truss and beam. Generation and evolution of structure is based on a triangular element composed of several members. Through experiment of the IGA structural form design system, it is found the structure forms are optimized as the evolutionary process proceeds, and the aesthetic preference of architect is also transferred from generation to generation. It is also revealed that the two criteria have mutual restrictions, which resulted in compromised results.
keywords	Bi-objective optimization; structural form; interactive genetic algorithm; subjective evaluation
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ijac20109202
id	ijac20109202
authors	van Embden, Maria Vera; Andres, Michela Turrin, Peter von Buelow
year	2011
title	ARCHITECTURAL DNA: A genetic exploration of complex structures
source	International Journal of Architectural Computing vol. 9 - no. 2, 133-150
summary	The approach demonstrated in this paper uses Evolutionary Computation (EC) to enhance and modify structural form based on biological micro structures.The forms are modified to conform to new boundary conditions associated with architectural structures.The process is based on a Genetic Algorithm (GA) which visually exposes for the designer a range of good performing solutions within thedesign space. The application of the GA is combined with parametric software, in this case Generative Components (GC). The program described here as ParaGen (Parametric Genetic Algorithm), uses a Finite Element Analysis (FEA) to determine the structural performance of the forms.This allows the designer to manipulate and optimize a parametrically defined model based on predefined criteria and parameters.The opportunities and limitations of this design process are explored and evaluated based on an experimental case study using topologies based on radiolarian skeletons.The design procedure described includes user interaction in the exploration of solutions that perform well both for the explicitly defined programmatic criteria (structural) as well as for the implicit criteria provided by the designer (visual aesthetic).
keywords	structural morphology, parametric design, genetic algorithm, structural optimization.
series	journal
last changed	2019/05/24 09:55

_id	ijac20109203
id	ijac20109203
authors	Martini, Kirk
year	2011
title	Optimization and parametric modelling to support conceptual structural design
source	International Journal of Architectural Computing vol. 9 - no. 2, 151-166
summary	The paper describes software combining parametric geometric modeling with a version of the harmony search method, modified to support multimodal structural optimization. Researchers have recognized the potential of population-based optimization methods, such as genetic algorithms, to support multimodal optimization: that is, generating a diverse range of good alternative solutions, rather than a single best solution. Among these methods is the harmony search method, which has been demonstrated to be efficient in many unimodal structural optimization problems. The paper describes a new version of the harmony search method, implemented as an assembly within Bentley's Generative Components, enabling high-level control of geometry. The new method is demonstrated on an bridge supported by two inclined parabolic arches, a structure where GC controls a complex geometry with a single variable. Comparative studies of the example find that the new method is more effective than conventional harmony search in consistently finding multiple good solutions.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2011_172
id	ecaade2011_172
authors	Okuda, Shinya; Ping, Chua Liang
year	2011
title	Form Follows Performance: Structural Optimisation and the Cost-effectiveness of Digital Fabrication
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.837-842
doi	https://doi.org/10.52842/conf.ecaade.2011.837
wos	WOS:000335665500096
summary	The presented paper describes a series of studio-based research projects on structural optimisation and the cost-effectiveness of digital fabrication that aim to balance stress distribution across thick walls or a rib density of slabs. As a consequence of the structural optimisations, the results tend to be non-uniform shapes that are not ideal for cost-effective fabrication. This paper introduces a few simple models to balance structural optimisation and fabrication cost-effectiveness. It involves relatively simple structural simulations as the design inputs, and then converts the simulation results into various architectural forms using parametric 3D modelling tool (McNeel Rhinoceros v4, Grasshopper v0.8) before fabricating them using digital fabrication technologies. The major challenge of this study is how to translate simulation results into architectural components/overall building shapes and how to fabricate complex forms in a cost-effective manner.
keywords	Digital Fabrication; Mass Customisation; Cost-effectiveness; Structural Optimization; Parametric
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_020
id	ecaade2011_020
authors	de la Barrera Poblete, Carlos Ignacio
year	2011
title	Evolutionary Strategy to Design Optimized Architecture
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.293-301
doi	https://doi.org/10.52842/conf.ecaade.2011.293
wos	WOS:000335665500033
summary	The purpose of the present experiment consists in optimizing a building modifying its apertures (windows) and its geometry to reduce heating and air conditioning consumption. The optimization is performed using a Micro-Genetic Algorithm (Micro-GAs) programmed in C# embedded like a series of functions into GenerativeComponents (GC). EnergyPlus (E+) software is used to evaluate the HVAC consumption levels of the building. The aim of the optimization is to keep the temperature at 20ºC on the hottest and coldest day using the least possible energy (Jules). In conclusion, this article proposes a new technique based on parametric modelling, evaluation and evolutionary optimization to generate efficient buildings with HVAC consumptions.
keywords	Optimization; Parametric design; Genetic Algorithms; Energy Consumption; Architecture
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_069
id	ecaade2011_069
authors	Lee, Seongki
year	2011
title	Feasibility Computation of the Perimeter Block Housing in Early Design Process: A Perimeter Block Housing Design based on Zone Ordinance of Seoul
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.235-244
doi	https://doi.org/10.52842/conf.ecaade.2011.235
wos	WOS:000335665500026
summary	The goal of this paper is to present the feasibility computing tool for the perimeter block housing design in early design process. Firstly, the paper describes briefly issues of perimeter block housing focusing on block design cases of Seoul. Secondly, constraints and requirements of perimeter block housing are analysed and formulated based on specific zone ordinance and regulation. Thirdly application of half-edge data structure is presented for interconnected geometric problem solving. Fourthly, multi-objective optimization algorithm developed is shortly explained as problem solving method. Finally, feasibility-computing software using Java object oriented programming is developed. This can contribute to the tool development that can generate, optimize, evaluate and visualize perimeter block housings in early phases of design process by providing reliable design solutions for stakeholders.
keywords	Perimeter block housing; design-constraints; parametric design; multi-objective optimization problem; design support system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2011_042
id	caadria2011_042
authors	Lee, Seongki and Ludger Hovestadt
year	2011
title	Complex adaptive residential quarter planning using multiobjective optimization: An agent-based modeling approach
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2011.443
summary	This paper presents a complex adaptive residential quarter planning software. It is developed using Java object oriented programming language and targeting at configuring the tower-type apartment in a dense area during early design stage. Rules are analyzed and formulated based on building code and zone ordinance. Moreover we develop an agent-based modeling with multi-objective optimization algorithm. In this modeling, each agent acts independently according to the rules that are designed to solve the complex geometric problems that are related to physical constraints. At the end, we present a simulation outcome of a case study.
keywords	MOOP; Urban design; residential quarter planning; agent system
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2011_083
id	sigradi2011_083
authors	Bertuzzi, Juan; Zreik, Khaldoun
year	2011
title	Mixed Reality Games - Augmented Cultural Heritage
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 304-307
summary	This paper aims at enhancing Cultural Heritage in several ways. Using Augmented Reality and Virtual Reality technologies, we seek to highlight the advantages of understanding and applying hyper worlds in cultural, sociological, psychological and educational fields. For this purpose, we suggest the inclusion of social serious games as the perfect link to a more productive and pleasant experience for users and a more accurate analysis of simulated cultural environments for researchers.
keywords	Game; social; city; culture; heritage
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2011_026
id	caadria2011_026
authors	Dorta, Tomás; Yehuda Kalay, Annemarie Lesage and Edgar Pérez
year	2011
title	First steps of the augmented design studio: The interconnected Hybrid Ideation Space and the CI Loop
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 271-280
doi	https://doi.org/10.52842/conf.caadria.2011.271
summary	Professional or school design studios are essential environments for design supporting free exploration of materials and representations, analogue or digital. New technologies have moved into the studio with mixed results. Paradoxically, the use of portable computers, using Internet as collaboration channel, has actually individualized the design work and limited the support to co-creation, reinforcing individual work. The Augmented Design Studio argues for the implementation of hybrid technology, such as the Hybrid Ideation Space (HIS), in the design studio to compensate for the absence of collective local or remote efficient ideation space. This paper presents a case study showing the primary results of distant synchronous and asynchronous design collaboration supported by the interconnected HIS during an ad-hoc project and assessed by the improved Collaborative Ideation Loop (CI Loop) methodology. The HIS was installed in two universities located in different countries. We ran a research protocol in the format of a design charrette where two teams (team a: two architecture students, team b: two industrial design students) participated in the ideation of a bus shelter. This case study shows that teams were able to co-design while they were virtually “teleported” into each other’s representations.
keywords	Design studio; hybrid approach; Collaborative Ideation Loop; telepresence; Hybrid Ideation Space
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2023_091
id	ascaad2023_091
authors	Haddad, Naif
year	2023
title	From Digital Heritage Documentation to 3D Virtual Reconstruction and Recreation for Heritage Promotion and Reinterpretation: The Case of the iHeritage Project
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 7-23.
summary	In the last two decades, the digital age Information and Communication Technologies (ICT) development and concerns combined with rapid technology have permitted the dissemination of different digital applications (including digital documentation, virtual reality (VR), augmented reality (AR), mixed reality (MR), digital gaming, and holograms etc.) oriented toward past, present and future communication using digital three-dimensional audio-visual content. Today, we must acknowledge that 3D virtual 3D reconstruction and recreation has become an established way to build, understand, reinterpret, and promote Cultural Heritage (CH). The virtual 3D reconstruction world and multimedia industry are often considered potential marketing channels for World Heritage Sites (WHS) and heritage tourism. 3D digital/virtual reconstruction merges and embodies subjectivity in one process, playing an attractive role in heritage tourism destinations and creating image experiences, providing the first enjoyable interpretation and information for most audiences. Based on the EU-funded iHERITAGE project ICT Mediterranean platform for the UNESCO CH, this paper attempts to examine some insights into constructing the optimistic image of heritage promotion and tourism in the context of CH as it flows through both physical and virtual spaces to give a glimpse of the future of virtual reconstruction. It illustrates the development of the concepts and practice, challenges and opportunities, advantages and disadvantages, and the negative and the positive sides of the related issues of only 3D digital reconstructions, and some issues concerning the ethics based on the International Chartres and Conventions mainly in the field of scientific visualisation, such as the London Charter (2009) and Seville Principles (2011). Finally, as a practical dimension, it presents some representative examples of 3D digital/virtual reconstruction of characteristic monuments of the WHS of Nabataean Petra in Jordan for the first time.
series	ASCAAD
email
last changed	2024/02/13 14:40

_id	cf2011_p099
id	cf2011_p099
authors	Huang, Andy; Erhan Halil, Woodbury Robert, Nasirova Diliara, Kozlova Karine
year	2011
title	Collaboration Workflow Simplified: Reduction of Device Overhead for Integrated Design Collaboration
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 591-602.
summary	Design collaboration relies on cognitive tools such as analog media and digital peripheral devices, and shows the characteristics of distributed cognition. It is a social and complex activity involving multiple agents communicating and using external cognitive tools to encode, decode, and share information in the process of collaborative task completion. The systems supporting this activity should meet the ’principle of least collaboration effort’ [4] that proposes that agents in collaboration minimize their effort in presentation and acceptance of information. Yet, current collaboration systems are dispersed mixed media that is often overloaded with representations and functionality, thus preventing seam- less information sharing. Designers are required to spend extra effort collecting information using peripheral devices and in system management when sharing information. The goal of this study is to understand these overheads in infor- mation collection and sharing using peripheral devices, and to provide designers with a supportive platform to enhance collaboration using both analog and digital media. In this paper, we first review available peripheral devices such as smart pens, digital cameras, and voice recorders, as well as existing collaboration sup- porting software systems for their benefits and deficiencies in collaboration. We then present ’DiNa’, a collaboration platform that is envisioned to improve pro- ductivity and reduce redundant work by integrating peripheral devices into the collaboration workflow. We demonstrate a possible workflow using this system through several scenarios where designers collaborate in performing a series of design tasks. We hope to bring attention to the importance least collaborative effort in designing systems to support real-world collaboration.
keywords	Collaboration, Peripheral Devices, Knowledge Collection, Human Computer Interaction, Computer Aided Design
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_064
id	ecaade2011_064
authors	Koch, Volker; Ritterbusch, Sebastian; Kopmann, Andreas; Müller, Marius; Habel, Thorsten; von Both, Petra
year	2011
title	Flying Augmented Reality: Supporting planning and simulation analysis by combining mixed reality methods using multicopter and pattern recognition
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.843-849
doi	https://doi.org/10.52842/conf.ecaade.2011.843
wos	WOS:000335665500097
summary	The article presents an immersive tool to support early planning stages in building construction and town planning. It combines concepts of augmented reality technologies with radio controlled multicopter aircrafts to visualize virtual information in direct context of the build environment within a highly flexible operating range.
keywords	mobile augmented reality; planning support; pattern recognition
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_234
id	sigradi2011_234
authors	Nome, Carlos; Clayton, Mark J.; Aguiar, Marcela
year	2011
title	BIM: configurações e desdobramentos para implementação prática e ensino de arquitetura [BIM: configurations and unfoldings for implementation in practice and architectural education]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 507-511
summary	This paper reports on the initial findings of a long term case study. It focuses on the BIM implementation efforts for Brazilian public firms that are responsible for the design, construction and management of buildings, infrastructure and urban spaces. It was postulated that BIM implementation could bring to Brazilian public institutions benefits similar to the ones achieved in the US, yet at a different cost structure. Research follows a mixed methods approach using focus groups and quasi experiments. Results describe obstacles encountered, benefits realized, and process changes expected that result from Brazilian socio-cultural context applied to public institutions.
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	caadria2011_052
id	caadria2011_052
authors	Al-Kazzaz, Dhuha A. and Alan Bridges
year	2011
title	Assessing innovation in hybrid designs using shape grammars
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 545-554
doi	https://doi.org/10.52842/conf.caadria.2011.545
summary	Al-kazzaz et al (2010) described hybrid adaption technique to generate innovative designs from heterogeneous precedents using shape grammars. An evaluation of the degree of innovation in the hybrid designs gave feedback to grammar users before and after applying a rule. Innovation was assessed using variables derived from the internal structure of the grammar such as: the number of antecedents in the corpus having the same rule; the number of rules in a subclass rule set having the same geometry; etc. However, the validity of the innovation assessment was unclear and the use of the feedback measures was not demonstrated. Accordingly, this study aims to verify the credibility of the innovation measures and to identify the independent variables that a user can control to achieve a significant impact on each innovation measure as a dependent variable.
keywords	Shape grammars; hybrid design; innovation assessment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p098
id	cf2011_p098
authors	Bernal, Marcelo; Eastman Charles
year	2011
title	Top-down Approach for Interaction of Knowledge-Based Parametric Objects and Preliminary Massing Studies for Decision Making in Early Design Stages
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 149-164.
summary	Design activities vary from high-degree of freedom in early concept design stages to highly constrained solution spaces in late ones. Such late developments entail large amount of expertise from technical domains. Multiple parallel models handle different aspects of a project, from geometric master models to specific building components. This variety of models must keep consistency with the design intent while they are dealing with specific domains of knowledge such as architectural design, structure, HVAC, MEP, or plumbing systems. Most of the expertise embedded within the above domains can be translated into parametric objects by capturing design and engineering knowledge through parameters, constraints, or conditionals. The aim of this research is capturing such expertise into knowledge-based parametric objects (KPO) for re-usability along the design process. The proposed case study ‚Äì provided by SOM New York‚ is the interaction between a massing study of a high-rise and its building service core, which at the same time handles elevators, restrooms, emergency stairs, and space for technical systems. This project is focused on capturing design expertise, involved in the definition of a building service core, from a high-rise senior designer, and re-using this object for interaction in real-time with a preliminary massing study model of a building, which will drive the adaption process of the service core. This interaction attempts to provide an integrated design environment for feedback from technical domains to early design stages for decision-making, and generate a well-defined first building draft. The challenges addressed to drive the instantiation of the service core according to the shifting characteristics of the high-rise are automatic instantiation and adaptation of objects based on decision rules, and updating in real-time shared parameters and information derived from the high-rise massing study. The interaction between both models facilitates the process from the designer‚Äôs perspective of reusing previous design solutions in new projects. The massing study model is the component that handles information from the perspective of the outer shape design intent. Variations at this massing study model level drive the behavior of the service core model, which must adapt its configuration to the shifting geometry of the building during design exploration in early concept design stages. These variations depend on a list of inputs derived from multiple sources such as variable lot sizes, building type, variable square footage of the building, considerations about modularity, number of stories, floor-to-floor height, total building height, or total building square footage. The shifting combination of this set of parameters determines the final aspect of the building and, consequently, the final configuration of the service core. The service core is the second component involved in the automatic generation of a building draft. In the context of BIM, it is an assembly of objects, which contains other objects representing elevators, restrooms, emergency stairs, and space for several technical systems. This assembly is driven by different layouts depending on the building type, a drop-off sequence, which is the process of continuous reduction of elevators along the building, and how this reduction affects the re-arrangement of the service core layout. Results from this research involves a methodology for capturing design knowledge, a methodology for defining the architecture of smart parametric objects, and a method for real-time-feedback for decision making in early design stages. The project also wants to demonstrate the feasibility of continuous growth on top of existing parametric objects allowing the creation of libraries of smart re-usable objects for automation in design.
keywords	design automation, parametric modeling, design rules, knowledge-based design
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadiaregional2011_032
id	acadiaregional2011_032
authors	Castellano, Devan
year	2011
title	Humanizing Parametricism
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.d3g
summary	As we increase the complexity and correlations of variables that are critical to the design of a project, we are becoming increasingly aware of the possibilities emerging from a computer integrated design process. There is such great opportunity to use these tools to manage and analyze multi variable design information, yet there is still much criticism of the design solutions created from computational design. These design solutions have been said to be “lacking any character, cultural influence, human engagement, or communication” and that “most of our contemporary architecture has forsaken this dimension of architectural discourse and it’s potential for exceptional spaces.” The current focus of computational investigation is primarily limited to building performance and optimization. Buildings that are designed from a purely optimizational construct without acknowledging the users desires and needs are falling short in creating “places”. Optimization can be the end result, but the constructs that are being optimized must be broadened to address all facets of a project. Computational design has emerged because it has the capacity to resolve multiple constraints and deal with extreme complexity of variables. By optimizing a more holistic set of constraints, computational architecture can truly provide comprehensive design solutions.
series	ACADIA
last changed	2022/06/07 07:49

_id	acadia11_52
id	acadia11_52
authors	Iwamoto, Lisa; Scott, Craig
year	2011
title	Material Computation: Voussoir cloud
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 52-55
doi	https://doi.org/10.52842/conf.acadia.2011.052
summary	In contrast to such structurally pure models, the power of computation has opened possibilities for at once muddying and synthesizing geometry, structure and material performance. Where the earlier twentieth century experiments employed a more or less uniform tectonic based on symmetrical structural diagrams, contemporary analysis and design techniques can efficiently adapt a material system to address variable, localized, and non-symmetrical loading conditions. This has resulted in projects characterized by non-optimized structural forms that register the impacts of geometry on material behavior with a deviated tectonic system.
series	ACADIA
type	keynote paper
email
last changed	2022/06/07 07:50

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2012.047
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_053
id	ecaade2011_053
authors	Barros, Mário; Duarte, José P.; Chaparro, Bruno
year	2011
title	Digital Thonet: An automated system for the generation and analysis of custom-made chairs
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.521-529
doi	https://doi.org/10.52842/conf.ecaade.2011.521
wos	WOS:000335665500060
summary	A system is presented to support the designer in creating custom versions of chairs within a predefined design language using Thonet chairs as a case study. The system consists of parametric models based on shape grammars linked to structural analysis to provide an integrated generative process for mass customization in the furniture industry.
keywords	Thonet; furniture design; finite element method; parametric design; mass customization
series	eCAADe
email
last changed	2022/05/01 23:21

For more results click below: