Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 554

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_051
id	ecaade2011_051
authors	Marcos, Carlos L.
year	2011
title	New materiality: ideation, representation and digital fabrication
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.351-360
doi	https://doi.org/10.52842/conf.ecaade.2011.351
wos	WOS:000335665500040
summary	Digital fabrication has become the true counterpoint to computer aided design in architecture. Thanks to new C.A.D./C.A.M. technologies architectural design can now manufacture complex buildings that only a decade ago could have been almost impossible to develop. This convergence between C.A.D./C.A.M. technologies is producing a trend from construction to manufacturing. Arbitrariness of architectural form should not be confused with arbitrariness of architectural design, the latter being contradictory with the very essence of design. Conventional or digital architecture must achieve design consistency and must rely on architecture’s basic principle, that of necessity. New materiality is a term being coined in relation to digital fabrication and the way it should address materiality in architecture. Innovation in the use of conventional materials, the ways in which they may be manufactured or tiled, as well as the emergence of new materials may outline what new materiality is about.
keywords	Digital fabrication; new materiality; ideation; representation; open form
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_90
id	acadia11_90
authors	Fure, Adam
year	2011
title	Digital Materiallurgy: On the productive force of deep codes and vital matter
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 90-97
doi	https://doi.org/10.52842/conf.acadia.2011.090
summary	This paper expands the discourse surrounding digital forms of making by scrutinizing the role of materials within computation, ultimately proposing a speculative working model that charts new territory. The growing importance of materials within technological research makes this an appropriate time to consider the nuance of their role within it. Currently, material innovation is happening along two central tracks: the customized cutting, sculpting, and forming of conventional materials with Computer Numerically Controlled (CNC) fabrication equipment and the development of new materials through innovations in material science. Both tracks rely on a limited set of material protocols which enable process-based control and eliminate the intrusion of any unpredictable material variable. Although efficient, such an approach limits architecture’s ability to procure novel material engagements. A few designers are developing an alternative model where computational codes are coupled with eccentric materials to produce unusual results. Digital materiallurgy, as I have called it, is part technique and part attitude; it relies on intentionally ceding limited design control to unpredictable matter—thus capitalizing on matter’s innate ability to produce unexpected formal and material complexity. Digital materiallurgy identifies the intersection of computation and eccentric materiality as a departure point for architectural innovation. By purposefully inserting material heterogeneity and inconsistency into computational means and methods, this work pries apart the apparently seamless relationship between digital design and physical production. By blurring the distinction between physical material and digital form, this work offers an integrated aesthetic experience, one that fetishizes neither the virtual nor the vintage but fuses both into a richer, wilder present.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	caadria2011_016
id	caadria2011_016
authors	Loveridge, Russell
year	2011
title	Parametric materiality: Material properties as catalyst for design
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 165-174
doi	https://doi.org/10.52842/conf.caadria.2011.165
summary	Sustainability issues are increasingly taking more prominent positions in the hierarchy of design decisions. The combination of linked digital analysis and parametric design has emerged as an integrated method of assimilating performative characteristics into design. As these “informed design” methods evolve there is an increasing ability for architectural geometry to be rationalized, whether this is for reasons of constructive optimization, or environmental and economic justification. But the macro scale approach to geometry in design is only one mediator of the designs impact in its surroundings. This paper discusses what happens when designers fundamentally question the role of materials in design, and specifically what happens when “new” materials and their performative characteristics can be modelled and implemented into the digital design decision process. These approaches are showcased in “proof of concept” projects that have been developed using digital design and production technologies, in collaboration with material scientists and industry.
keywords	Materiality; analysis; performance; design; fabrication
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2011_047
id	ecaade2011_047
authors	Wiertelarz, Kathrin M.
year	2011
title	An exploration in teaching architectural design for construction and fabrication
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.35-42
doi	https://doi.org/10.52842/conf.ecaade.2011.035
wos	WOS:000335665500002
summary	The intent of this paper is to examine experimental design methods in the field of architecture and their implementation in academic settings. The projects emerged during design research studio at the institute of digital design techniques at the university of Kassel and collaborative workshops with several institutes. The starting point of the teaching concept was a divergence from the usual methods and ways of thinking, allowing for new, innovative solutions to emergence during the design process. The main point was a development of novel spatial modules in coherence with material and structural considerations. The question of materiality becomes a crucial consideration. The characteristics of different materials used for models development did not just influenced geometrical possibilities but also intensify, explore and organize spatial and structural qualities of the projects.
keywords	Research; Education and Practise; Generative and Parametric Digital Design Aids, Tools for Construction and Production
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_290
id	sigradi2011_290
authors	Azevedo de Oliveira, Fabiana Mabel
year	2011
title	Redes sociotécnicas: a concepção de uma interface [Sociotechnical network: design of an interface]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 568-570
summary	This paper aims to examine the forms of representation of the processes of creation of Web interfaces for platforms. Its origin is associated with a proposal that understands the new communications technologies, specifically the Internet, and the possibility of formation of a sociotechnical network, as a tool to expand the ways of social interaction (Egler, 2007). Increasing access to information and communication, making the process more open, redefining the relationships and social exchanges, and allowing its mediation by digital processes.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadiaregional2011_029
id	acadiaregional2011_029
authors	Bell, Brad; Kevin Patrick McClellan, Andrew Vrana
year	2011
title	Reconfiguring Collaboration by Computational Means Tex-Fab: A new model for collaborative engagement
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.f7u
summary	TEX-FAB is a non-profit organization founded between three universities in Texas with the primary function of connecting design professionals, academics, and manufactures interested in digital fabrication. The three co-directors established TEX-FAB as a collective action, one that attempts to combine divergent interests and capabilities, for the purpose of strengthening the regional discourse around digital fabrication and parametric design. The three primary avenues for accomplishing this goal are set out as Theoria (Lectures / Exhibitions), Poiesis (Workshops) and Praxis (Competition). We see this type of effort as a new paradigm focused on providing a network of affiliated digital fabrication resources, and a platform for education/ exchange on issues of parametric modeling. It is our position that TEX-FAB engages the new and growing awareness of a regional and global hybridization. We seek to leverage the burgeoning global knowledge base to produce a more specific and contextual dialogue within the region we operate, teach, and practice.
series	ACADIA
last changed	2022/06/07 07:49

_id	acadia11_242
id	acadia11_242
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2011
title	Parametric Robot Control: Integrated CAD/CAM for Architectural Design
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 242-251
doi	https://doi.org/10.52842/conf.acadia.2011.242
summary	Robots are gaining popularity in architecture. Snøhetta has recently purchased their own industrial robot, becoming one of the first architectural offices to adopt robot technology. As more and more architects are exposed to robotic fabrication, the need for easy interoperability, integration into architectural design tools and general accessibility will increase. Architects are discovering that industrial robots are much more than kinematic machines for stacking bricks, welding or milling - they are highly multifunctional and can be used for a huge variety of tasks. However, industry standard software does not provide easy solutions for allowing direct robot control right from CAAD (Computer Aided Architectural Design) systems. In this paper we will discuss existing methods of programming industrial robots, published architectural results (Gramazio and Kohler 2008) and the design of a new user interface that allows intuitive control of parametric designs and customized robotic mass production, by integrating CAM (Computer Aided Manufacturing) functions into CAAD.
keywords	robot programming; parametric design; mass customization; grasshopper component design; fabrication; robot milling; digital architecture
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
doi	https://doi.org/10.52842/conf.acadia.2011.138
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2011_423
id	sigradi2011_423
authors	Chiarella, Mauro; Dalla Costa, Matias
year	2011
title	Patrones Generativos Dinámicos (URDIR.Lab). Estrategias proyectuales paramétricas simples para el ejercicio profesional cotidiano [Dynamic Generative Patterns (URDIR.Lab). Simple Parametric Design Strategies for Everyday Practice]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 210-214
summary	The international architecture of the past decade adds parametric design to the project as a new variable dynamic strategy in the design process. Generative patterns meet a way of achieving parameterization from the computational geometry. The experimental developments of URDIR.Lab (FADU-UNL) group, ranges from: the current projective exercises with dynamic materials and forms to the development of simple formulas applied to everyday practice. The proposed challenge is to merge the local available technological resources - pre-industrial and industrial - with the ideation systems of post-industrial technologies.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2011_158
id	sigradi2011_158
authors	Davis, Felecia
year	2011
title	Telephoning Textiles: Networked Soft Architectures
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 231-234
summary	A textile receives a telephone call from a mobile telephone. This wearable textile is an innovative example of inter-layering and weaving together materials to make a composite soft material that can receive calls from mobile telephones. If a textile can be designed as a wearable shirt, as demonstrated in this paper, then many of these same fabrication techniques can be integrated into soft architecture at a scale large enough to shelter people. This project demonstrates networked soft materials; the project develops the concept of soft architecture and presents a new framework for building integrated architectural systems.
keywords	Computational Textile; Soft Architecture; E-Textiles; Mobile Communications; Networked Wearables
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	caadria2011_026
id	caadria2011_026
authors	Dorta, Tomás; Yehuda Kalay, Annemarie Lesage and Edgar Pérez
year	2011
title	First steps of the augmented design studio: The interconnected Hybrid Ideation Space and the CI Loop
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 271-280
doi	https://doi.org/10.52842/conf.caadria.2011.271
summary	Professional or school design studios are essential environments for design supporting free exploration of materials and representations, analogue or digital. New technologies have moved into the studio with mixed results. Paradoxically, the use of portable computers, using Internet as collaboration channel, has actually individualized the design work and limited the support to co-creation, reinforcing individual work. The Augmented Design Studio argues for the implementation of hybrid technology, such as the Hybrid Ideation Space (HIS), in the design studio to compensate for the absence of collective local or remote efficient ideation space. This paper presents a case study showing the primary results of distant synchronous and asynchronous design collaboration supported by the interconnected HIS during an ad-hoc project and assessed by the improved Collaborative Ideation Loop (CI Loop) methodology. The HIS was installed in two universities located in different countries. We ran a research protocol in the format of a design charrette where two teams (team a: two architecture students, team b: two industrial design students) participated in the ideation of a bus shelter. This case study shows that teams were able to co-design while they were virtually “teleported” into each other’s representations.
keywords	Design studio; hybrid approach; Collaborative Ideation Loop; telepresence; Hybrid Ideation Space
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2011_210
id	sigradi2011_210
authors	Goldemberg, Eric
year	2011
title	The Pulsating Rhythm of Digital Perception
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 103-106
summary	This paper highlights the role of digital design as catalyst for a new spatial sensibility related to rhythmic perception. It proposes a novel understanding of computational architecture based on the ability of digital design to supersede its commonly accepted instrumental role, demonstrating the potential to engage in deeper issues of the discipline and to invigorate a discourse of part-to-whole relationships through the lens of rhythmic affect. Pulsation introduces the fundamental animate capacity of spatial organizations and critically reshapes our perception of architectural space across multiple scales of a project, from digital inception to fabrication.
keywords	Rhythm; perception; repetition; difference; ornament
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2015_ws-robowood
id	ecaade2015_ws-robowood
authors	Hornung, Philipp; Johannes Braumann, Reinhold Krobath, Sigrid Brell-Cokcan and Georg Glaeser
year	2015
title	Robotic Woodcraft: Creating Tools for Digital Design and Fabrication
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 33-36
doi	https://doi.org/10.52842/conf.ecaade.2015.2.033
wos	WOS:000372316000004
summary	Robotic Woodcraft is a transdisciplinary, arts-based investigation into robotic arms at the University for Applied Arts Vienna. Bringing together the craftsmen of the Department for Wood Technology, the geometers of the Department for Arts and Technology, the young industrial design office Lucy.D and the roboticists of the Association for Robots in Architecture, the research project explores new approaches on how to couple high-tech robotic arms with high-end wood fabrication. In the eCAADe workshop, participants are introduced to KUKA\|prc (parametric robot control, Braumann and Brell-Cokcan, 2011) and shown approaches on how to create their own digital fabrication tools for customized fabrication processes involving wood.
keywords	Robotic woodcraft; Arts-based research; Robotic fabrication; Visual programming; Parametric robot control
series	eCAADe
last changed	2022/06/07 07:50

_id	acadia11_112
id	acadia11_112
authors	Klinger, Kevin
year	2011
title	Informing Design through Production Formulations
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 112-113
doi	https://doi.org/10.52842/conf.acadia.2011.112
summary	Over the decade of the aughts, architectural discourse has charted a new course, and in the wake of the digital effect on mainstream architectural thinking, we find ourselves in a great age of exploration. Research in digital fabrication has moved from the general to the specific, in that it aims to focus efforts related to technological impact on particular cases and variable parameters which contribute to even larger ideas, such as manufacturing, the social impact, sustainable practices, etc. Specific work on building components, coupled with a pragmatic rigor about durability, strength, and production have provided concrete examples of work that spin out of these design-through-production investigations. To be certain, each new design-through-production project explores unique territory and contributes to the knowledge map by adding to a matrix of possible applications. Still, we align our work with the age-old discipline of architectural thinking, while privileging “Making, Materials, Performance, Form, and Function.” Indeed, form is informed by performance! The principles that govern the human decision-making, in light of this new kind of digitally generated work have yet to be clearly articulated, but techniques and methods have expanded to create new opportunities for making architecture. In fact, research has tended to be less about framing the new principles for making digital architecture and more about adding specific cases to the knowledge base, as each new project helps to define the collective body.
series	ACADIA
type	moderator overview
email
last changed	2022/06/07 07:51

_id	ecaade2011_046
id	ecaade2011_046
authors	Kudumovi_, Lana; Taso, Amra; Hasanbegovi_, Omer
year	2011
title	Digital design and fabrication: Case study: seashell
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.779-787
doi	https://doi.org/10.52842/conf.ecaade.2011.779
wos	WOS:000335665500090
summary	Computational aspects of architectural design have revolutionized actual process, and have made a new platform for cooperation that spans across all disciplines. The focus of this study is to understand how the seashell form can be applicable in design process of human architectures. Our approach will show the act of choosing an inspirational natural form and its application into the virtual world, then digitalization, transformation, and evaluation of the form that are suitable for human architecture. 3D model generating would be performed by doing the scan of a selected seashell form. Further action would be to import the object as a tool in the Zbrush application, and continued modeling transformations. This phase would include other parameters that need to be integrated during the architectural design process since architecture usually exists in a radically different environment in comparison with the seashell.
keywords	Complexity; architectural form; generative design; digital design fabrication; rapid prototyping
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2011_197
id	sigradi2011_197
authors	Lara, Arthur H.; Giacaglia, Marcelo E.; da Silva Moura, Norberto
year	2011
title	Intervenções Urbanas Paramétricas [Urban Parametric Interventions]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 500-502
summary	Renowned Architecture schools are acting globally by means of international workshops. In these, new methodo- logies of digital parametric representations are applied in urban interventions. We bring forward an inflatable solution for sheltering a sports event, held under a viaduct. In this case, parametric technology was employed in the design, with the use of digital fabrication. Several other interventions were proposed for the same space chosen for the action of a multidisciplinary group of professors. Differently from government actions that usually focus on the removal of social problems this workshop sought a solution through technology, new materials and parametric design.
keywords	Parametric design; urban interventions; metaballs; augmented culture
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	acadia11_144
id	acadia11_144
authors	Lavallee, Justin; Vroman, Rachel; Keshet, Yair
year	2011
title	Automated Folding of Sheet Metal Components with a Six-axis Industrial Robot
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 144-151
doi	https://doi.org/10.52842/conf.acadia.2011.144
summary	Through the automation of folding of sheet metal components by a six-axis industrial robot we explored the integration of parametrically-driven design and fabrication tools and its real-world implementation. Developed out of research into new possibilities presented by direct programming of flexible, digitally-driven, industrial tools, this project intends to speculate about the future implementation of parametric modeling tools in the field of design, and associated new, parametrically variable, fabrication processes. We explored the relationship between designer and machine, between data and craft, and tested conjectures about scale of production, through the digital creation, physical cutting, mental tracking, robotic folding, manual riveting, and sometimes painful installation of five hundred and thirty two unique sheet metal components. Such evaluations give insight into possible trajectories for development of new models of fabrication processes, questioning the scale and intellectual scope appropriate for custom fabrication environments, and the implicit need to then evaluate the incorporation of digital craft in design pedagogy.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 07:52

_id	ecaade2011_143
id	ecaade2011_143
authors	Lemberski, David; Hemmerling, Marco
year	2011
title	TouchControl: An interactive multi-touch 3D design tool
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.279-284
doi	https://doi.org/10.52842/conf.ecaade.2011.279
wos	WOS:000335665500031
summary	Today’s architectural design is changing rapidly through the scope of new digital design tools (software like parametrical modelers) on the one and the use of digitally controlled fabrication techniques (hardware like 3D CNC-milling) on the other side. However the full intuitive and experimental potential of the software has to be accessed through the sometimes limiting bottleneck of the traditional mouse-screen user interface although alternative interaction methods like multi-touch became available. This paper focuses on extending the usability and spontaneity in a common architectural design process using an iPad as an external hardware controller.
keywords	Intuitive design tool; iPad; OSC; multi-touch; human-computer interaction
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_245
id	sigradi2011_245
authors	Martin Iglesias, Rodrigo
year	2011
title	Hacia un Nuevo Paradigma de Diseño Colaborativo [Towards a new paradigm of Collaborative Design]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 123-126
summary	The constant discovery of new digital tools for design and representation confront us with new concepts, of- fering new theoretical perspectives on design practice. We must rethink the role of the designer and find tools to enable communication within projecting interdisciplinary teams. The future of design lies in collaboration and participation. In this paper we explore the idea of postdisciplinary design and sketch a operational theory of design based on the transposition, towards a new interfase for collaborative design that allows different ways of design and different strategies of use for each discipline involved.
keywords	Design; Interdisciplinary; Collaborative; Interfase; Transposition
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: