Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 553

Reformat results as: short short into frame detailed detailed into frame

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia11_90
id	acadia11_90
authors	Fure, Adam
year	2011
title	Digital Materiallurgy: On the productive force of deep codes and vital matter
doi	https://doi.org/10.52842/conf.acadia.2011.090
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 90-97
summary	This paper expands the discourse surrounding digital forms of making by scrutinizing the role of materials within computation, ultimately proposing a speculative working model that charts new territory. The growing importance of materials within technological research makes this an appropriate time to consider the nuance of their role within it. Currently, material innovation is happening along two central tracks: the customized cutting, sculpting, and forming of conventional materials with Computer Numerically Controlled (CNC) fabrication equipment and the development of new materials through innovations in material science. Both tracks rely on a limited set of material protocols which enable process-based control and eliminate the intrusion of any unpredictable material variable. Although efficient, such an approach limits architecture’s ability to procure novel material engagements. A few designers are developing an alternative model where computational codes are coupled with eccentric materials to produce unusual results. Digital materiallurgy, as I have called it, is part technique and part attitude; it relies on intentionally ceding limited design control to unpredictable matter—thus capitalizing on matter’s innate ability to produce unexpected formal and material complexity. Digital materiallurgy identifies the intersection of computation and eccentric materiality as a departure point for architectural innovation. By purposefully inserting material heterogeneity and inconsistency into computational means and methods, this work pries apart the apparently seamless relationship between digital design and physical production. By blurring the distinction between physical material and digital form, this work offers an integrated aesthetic experience, one that fetishizes neither the virtual nor the vintage but fuses both into a richer, wilder present.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	sigradi2011_210
id	sigradi2011_210
authors	Goldemberg, Eric
year	2011
title	The Pulsating Rhythm of Digital Perception
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 103-106
summary	This paper highlights the role of digital design as catalyst for a new spatial sensibility related to rhythmic perception. It proposes a novel understanding of computational architecture based on the ability of digital design to supersede its commonly accepted instrumental role, demonstrating the potential to engage in deeper issues of the discipline and to invigorate a discourse of part-to-whole relationships through the lens of rhythmic affect. Pulsation introduces the fundamental animate capacity of spatial organizations and critically reshapes our perception of architectural space across multiple scales of a project, from digital inception to fabrication.
keywords	Rhythm; perception; repetition; difference; ornament
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2015_ws-robowood
id	ecaade2015_ws-robowood
authors	Hornung, Philipp; Johannes Braumann, Reinhold Krobath, Sigrid Brell-Cokcan and Georg Glaeser
year	2015
title	Robotic Woodcraft: Creating Tools for Digital Design and Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2015.2.033
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 33-36
summary	Robotic Woodcraft is a transdisciplinary, arts-based investigation into robotic arms at the University for Applied Arts Vienna. Bringing together the craftsmen of the Department for Wood Technology, the geometers of the Department for Arts and Technology, the young industrial design office Lucy.D and the roboticists of the Association for Robots in Architecture, the research project explores new approaches on how to couple high-tech robotic arms with high-end wood fabrication. In the eCAADe workshop, participants are introduced to KUKA\|prc (parametric robot control, Braumann and Brell-Cokcan, 2011) and shown approaches on how to create their own digital fabrication tools for customized fabrication processes involving wood.
wos	WOS:000372316000004
keywords	Robotic woodcraft; Arts-based research; Robotic fabrication; Visual programming; Parametric robot control
series	eCAADe
last changed	2022/06/07 07:50

_id	acadia11_112
id	acadia11_112
authors	Klinger, Kevin
year	2011
title	Informing Design through Production Formulations
doi	https://doi.org/10.52842/conf.acadia.2011.112
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 112-113
summary	Over the decade of the aughts, architectural discourse has charted a new course, and in the wake of the digital effect on mainstream architectural thinking, we find ourselves in a great age of exploration. Research in digital fabrication has moved from the general to the specific, in that it aims to focus efforts related to technological impact on particular cases and variable parameters which contribute to even larger ideas, such as manufacturing, the social impact, sustainable practices, etc. Specific work on building components, coupled with a pragmatic rigor about durability, strength, and production have provided concrete examples of work that spin out of these design-through-production investigations. To be certain, each new design-through-production project explores unique territory and contributes to the knowledge map by adding to a matrix of possible applications. Still, we align our work with the age-old discipline of architectural thinking, while privileging “Making, Materials, Performance, Form, and Function.” Indeed, form is informed by performance! The principles that govern the human decision-making, in light of this new kind of digitally generated work have yet to be clearly articulated, but techniques and methods have expanded to create new opportunities for making architecture. In fact, research has tended to be less about framing the new principles for making digital architecture and more about adding specific cases to the knowledge base, as each new project helps to define the collective body.
series	ACADIA
type	moderator overview
email
last changed	2022/06/07 07:51

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_016
id	caadria2011_016
authors	Loveridge, Russell
year	2011
title	Parametric materiality: Material properties as catalyst for design
doi	https://doi.org/10.52842/conf.caadria.2011.165
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 165-174
summary	Sustainability issues are increasingly taking more prominent positions in the hierarchy of design decisions. The combination of linked digital analysis and parametric design has emerged as an integrated method of assimilating performative characteristics into design. As these “informed design” methods evolve there is an increasing ability for architectural geometry to be rationalized, whether this is for reasons of constructive optimization, or environmental and economic justification. But the macro scale approach to geometry in design is only one mediator of the designs impact in its surroundings. This paper discusses what happens when designers fundamentally question the role of materials in design, and specifically what happens when “new” materials and their performative characteristics can be modelled and implemented into the digital design decision process. These approaches are showcased in “proof of concept” projects that have been developed using digital design and production technologies, in collaboration with material scientists and industry.
keywords	Materiality; analysis; performance; design; fabrication
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2011_110
id	ecaade2011_110
authors	Pak, Burak; Verbeke, Johan
year	2011
title	Usability as a Key Quality Characteristic for Developing CAAD Tools and Environments
doi	https://doi.org/10.52842/conf.ecaade.2011.269
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.269-278
summary	In this paper, we will stress the importance of usability as a key quality characteristic for the Computer Aided Architectural Design (CAAD) software prototypes. We claim that usability evaluation practices can assist the integration of human factors and the accommodation of local differences. These practices are not solely limited to interface tests, but they can also provide valuable information on the possible added values of CAAD software prototypes, increase the overall product quality and thus contribute to the sustainable development of the CAAD research field. In this context, we aim to initiate a constructive discussion on this topic by reviewing various usability frameworks and highlighting possible opportunities and challenges of applicable evaluation methods. Consequent to this discussion, we will elaborate on our recent findings relating to the reliability and effectiveness of particular evaluation methods applied to a web-based geographic virtual environment prototype. In conclusion, we will introduce a new “design usability” framework that is suitable for CAAD software development; which suggests a variety of design usability quality characteristics, cost-effective evaluation methods and possible influence factors in the evaluation process.
wos	WOS:000335665500030
keywords	Usability; Quality in Use; Evaluation; CAAD Software Development; Human Factors
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ijac20109201
id	ijac20109201
authors	Ramsgard Thomsen, Mette; Martin Tamke, Jacob Riiber Nielsen
year	2011
title	Generating a scalar logic: producing the "it's a SMALL world" exhibition
source	International Journal of Architectural Computing vol. 9 - no. 2, 115-132
summary	This paper presents the design project “it’s a SMALL world”, an exhibition design developed for the Danish Design Centre in 2009.The project investigates the making of a generative design environment by which multiple design parameters as from program, site or the subsequent digital fabrication and assembly process can be negotiated. In this paper we discuss methods for understanding the emergent interrelationships between encoded parameters, how to manage these and their impact on design.The implementation of the design necessitated a novel design method that allowed to blend the qualities of a generative design approach, that can adapt through recursion gradually to local requirements, with explicit definitions.The project showcases with its new developed manufacturing system for non- standard element how customized digital design and production tools allow for a novel nearness to material and new ways of production and collaboration of architects, engineers and the crafts.
series	journal
last changed	2019/05/24 09:55

_id	cf2011_p112
id	cf2011_p112
authors	Schlueter, Arno
year	2011
title	Integrated Design Process for Prefabricated Façade Modules with Embedded Distributed Service Systems
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 419-434.
summary	The awareness of the environmental impact of buildings concerning their CO2 emissions, their energy and resource consumption has raised the challenges on building design, construction and operation. Building service systems are among the main contributors to building related emissions. Their consideration already in design is therefore of growing importance. Distributed service systems represent a new paradigm towards the supply of a building with energy and matter. Being small, efficient and networked, they can be distributed within the building fabric to allow an efficiently supply of the building space. Their employment, however, affects the spatial layout, construction and resulting building performance. In order to capture the resulting complex dependencies, a strategy to integrate such systems into the architectural design process is necessary. In this work a design process is proposed, that integrates distributed service systems into building design, dissolving the classical divide between architectural design and service systems layout. Digital modelling and computational methods are employed to create and analyse design solutions, visualize performance criteria and provide the relevant data for the intended digital fabrication process. The process is exemplified using a joint university-industry case study project focusing on parametric façade modules, developed in a seamless digital process from concept to fabrication.
keywords	integrated design, design process, performance assessment, digital fabrication, distributed building service systems
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p095
id	cf2011_p095
authors	Shin, Dongyoun; Muller Arisona Stefan, Schmitt Gerhard
year	2011
title	Crowdsourcing Urban Simulation Platform Using Mobile Devices and Social Networking Media Technologies
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 233-246.
summary	Introduction and Research Questions The research area of urban simulation methods has grown notably in recent decades. Most of the research topics that concern urban simulation have concentrated on defining the complexities of urban environments with certain rules and algorithms. However, cities are getting more complex and changes to them are being made at greater speed. Therefore, current urban simulation modeling approaches based on rules and protocols are still struggling to reduce the gap between the virtual simulation environment and the real cities, since the behavior of citizens is frequently unpredictable and continuously adapting. In this context, research is necessary to develop more fundamental simulation methods that can handle these complexities and changes, leading to new design decision support systems. Therefore, this research was motivated with the following questions: What is the origin of the complexities and transformations of the urban environment? How can we approach the origin to deal with the urban complexities and transformations? To answer these questions, we hypothesize that the diverse human intentions are the origin of the issues that result from all of the complexities and changes of the cities. General Objectives As a result, we propose a participatory simulation environment that brings human intention into the urban simulator: a crowdsourcing [1] simulation platform that is operated by the people‚Äôs participation. To achieve this crowdsourcing urban sustainability simulation environment, we must address the following research issues: categorization of urban sustainability indicators and technologies, inducing mass participations, and an implementation of social network services. Furthermore, we aim at using mobile computing devices, such as smart phones, as a terminal to the simulation environment. Fundamental Goals Our goal is to enable people to share urban information at any time and to compare each other‚Äôs contributions through the crowdsourcing urban simulation platform. The information will be returned to the citizens to support their sustainability-aware life. The simulation platform also gives a chance not only to compare each other‚Äôs levels of sustainability, but also to give self-satisfaction through an altruistic contribution for a sustainable future. Thus, people shall utilize the simulator in order to predict their individual or cities‚Äô future sustainability. Meanwhile, the user data will be collected and delivered to the central server in order to analyze the urban sustainability. Consequently, we can measure the urban sustainability based on a real human interaction, and compare individuals as well as cities. The whole process of this research is presented as a new paradigm of an urban simulator that reflects the urban complexities and the inconstant human mind changes. Specific Objectives of This Paper This paper will represent strategies of the crowdsourcing urban simulation which can make a paradigm shift of urban simulation and shall define the customized sustainable indicators for the initial steps of this research. It shows how as system for can communicate with the public using the current technologies: high performance mobile media, social network services and wide-area geospatial information systems. Furthermore, for the first step of this research, the paper defines the urban sustainability indicators, and their categorization is generalized and translated into simpler ways to support the citizen‚ intuitive understanding.
keywords	Crowdsourcing, Urban sustainability, Multi-agent based simulation, Social network services
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p116
id	cf2011_p116
authors	Stavric, Milena; Wiltsche Albert
year	2011
title	Ornamental Plate Shell Structures
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 817-832.
summary	The development of digital technologies in the last twenty years has led to an unprecedented formal freedom in design and in the representation in virtual space. Combining non-standard geometry with CAD tools enables a new way of expression and realization of architectural ideas and conceptions. The transformation of a virtual double-curved surface into a buildable physical structure and object is always accompanied by huge costs and big problems like geometric and statical ones. Our structure is a type of shell structure consisting of plane panels. The load bearing system is organized in a way so that the forces are distributed along the edges of the plane elements. A structure with plane elements supports a high stiffness in combination with a relatively small overall weight. This is due to smooth curved shape of the geometry. We show geometric methods how to control the construction of curved surfaces out of planar building elements. The approach is based on the discretization of the surfaces by plane elements derived from tangent planes. The novel process in this work is that we take the surface curvature at local points into account. This solves former problems which occurred when intersecting the planes. The fact that there is an infinite number of possibilities when selecting tangent planes on a surface raises the issue of the way and conditions which make it possible to select specific tangent planes whose intersection would produce a desired three-dimensional shape. In order to satisfy also aesthetical requirements we engage plane geometrical patterns and ornaments and transfer them into spatial shape. So a three-dimensional ornamental shape is deduced from a two-dimensional ornament. Another task which will be showed is how to limit the infinite range of possibilities to generate a preferred spatial ornament and on what conditions surface tessellation would be ornamental in character, i.e. it would generate not only the functional, but also the aesthetic component of a free-form surface.
keywords	ornament, discretization, free-form surfaces
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_093
id	ecaade2011_093
authors	Veliz, Alejandro; Sills, Pablo
year	2011
title	Digital design of reconstruction proposals in Chile
doi	https://doi.org/10.52842/conf.ecaade.2011.673
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.673-678
summary	After the earthquake and tsunami occurred in Chile on February 27th 2010, the Technical University Federico Santa Maria was asked to contribute with reconstruction proposals for the commercial infrastructure destroyed in the town “San Juan Bautista”. Located 600 km (~370 mi) away from the continent, this town is not just the home of several endemic species, but is also located next to a National Protected Area and UNESCO Biosphere Reserve. Within this context, the design problem consisted on the development of a component-based strategy and prefabrication requirements, and to reduce to the minimum the implied logistics and environmental impacts of the new buildings. With a Studio of 23 final year students and the support of the Architecture Firms Association, 11 projects were developed using digital tools such as visual programming and digital fabrication. Finally, technical documentation was produced and delivered to the local and government authorities.
wos	WOS:000335665500078
keywords	Visual programming; post-disaster reconstruction; prefabrication; constraintbased design; building components
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p124
id	cf2011_p124
authors	Verdonck, Evelien; Froyen Hubert
year	2011
title	Universal Design Patterns: Designing a Web-Based Tool with Architects
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 103-115.
summary	The implementation of Universal Design in design practice requires a number of tools that provide support to designers throughout the design process. In recent years, several studies have been carried out, determining methods to help designers select appropriate design support tools (DSTs), looking for desired data representation characteristics, or focusing on involving a wide range of users in the design process. This paper discusses how architects, as end-users of the DST, are involved in the development process of a new web-based tool based on the Universal Design Patterns concept. The Universal Design Pattern concept was developed based on Christopher Alexander‚Äôs Pattern Language, and looks at the possibility of using patterns to describe existing barriers in the built environment (conflicts), as well as design characteristics that may be implemented to make new designs more inclusive (resolutions). Through Universal Design Patterns, users can contribute new insights about the existing built environment, while architects can discuss the inclusive qualities of new design solutions or find useful design guidance. Involving the architects in developing the Universal Design Pattern concept into a web-based design tool is essential to establish a structure for the Universal Design Patterns that is compatible with the designers‚Äô way of thinking about design problems. Using the specific structure of Universal Design Patterns allows for the grouping of information into appropriately themed units on different levels of the design in a clear and uniform way. Building on the results of a survey involving 406 architects and a comparative study of existing DSTs for Universal Design, this paper first focuses on the results of a series of interviews that provided the basis for a first data-structure for the Universal Design Patterns tool. In addition to this, case-studies were carried out to ensure the new tool can easily be incorporated into the architects‚Äô design process. The results from both the interviews and the case-studies were combined in a preliminary model for the web-based tool. Finally, the methodology for testing this model with architects is discussed. In conclusion, some thoughts are given on the potential benefits of not only testing new DSTs with designers, but involving them actively from the early stages; or, in other words, the benefits of tools not only designed for architects, but with them.
keywords	Universal Design, Tools, Patterns
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_017
id	caadria2011_017
authors	Hanafin, Stuart; Sambit Datta and Bernard Rolfe
year	2011
title	Tree facades: Generative modelling with an axial branch rewriting system
doi	https://doi.org/10.52842/conf.caadria.2011.175
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 175-184
summary	The methods and algorithms of generative modelling can be improved when representing organic structures by the study of computational models of natural processes and their application to architectural design. In this paper, we present a study of the generation of branching structures and their application to the development of façade support systems. We investigate two types of branching structures, a recursive bifurcation model and an axial tree based L-system for the generation of façades. The aim of the paper is to capture not only the form but also the underlying principles of biomimicry found in branching. This is then tested, by their application to develop experimental façade support systems. The developed algorithms implement parametric variations for façade generation based on natural tree-like branching. The benefits of such a model are: ease of structural optimization, variations of support and digital fabrication of façade components.
keywords	Parametric Modelling; Biomimicry; Lindenmayer Systems; Branching Structures
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia11_98
id	acadia11_98
authors	Kudless, Andrew
year	2011
title	Bodies in Formation: The material evolution of flexible formworks
doi	https://doi.org/10.52842/conf.acadia.2011.098
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 98-105
summary	Borne from the complex negotiation between liquid mass and tensile constraint, flexible formwork castings are resonant with material energy. Hard as stone, yet visually supple and fluid, the pre-cast architectural assemblies produced using flexible formwork techniques suggest integrative design strategies that acknowledge the intricate associations between form, fabrication, and material behavior. This tripartite synthesis between geometry, making, and performance has emerged as one of the central themes of contemporary architecture and engineering. Borrowing ideas of morphology from biology and physics, 20th century architectural innovators such as Antoni Gaudi and Frei Otto built a legacy of material practice that incorporated methods of making with material and geometric logics. The emergent effects (and affects) produced through these highly integrative practices serve as the basis of much of the research and design at Matsys. Building on the flexible formwork research of Miguel Fisac in the 1970s, the P_Wall series by Matsys explores the use of digital tools in the generation and fabrication of these bodies in formation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	acadia11_300
id	acadia11_300
authors	Ruffo Calderon, Emmanuel; Schimek, Heimo; Wiltsche, Albert
year	2011
title	Seeking Performative Beauty
doi	https://doi.org/10.52842/conf.acadia.2011.300
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 300-307
summary	With digital design and fabrication becoming ever more common in architectural design, the computational geometry topic of discretizing freeform surfaces into flat panels has become a common challenge. At the present, most approaches to the issue of preserving a 2D-tessellation on a freeform surface are focused on optimizing the shape of the structure by approximating geometric “equally-sized” flat patterns. In doing so, these strategies treat the approximation of the desired shape as the primary goal, leaving aside the aesthetical aspect of the paneling, which can be seen as having an ornamental quality. In contrast to these common strategies, the project presented in this paper pursues a more holistic approach that tries to integrate aesthetical as well as structural issues by using more complex as well as more performative patterns for the discretization. In the present paper, we present algorithmic strategies that were designed to integrate from the aesthetics of an exposed timber structure, through analysis of structural loading feedbacks to a detailed level of the physical joint system, as part of the fundamental early design decisions. The consequence of the overall negotiations relies fully on their physical integration through computational design. The present paper discusses both the algorithmic techniques and the joint systems through a series of case studies. At the end of the paper we provide an overview to upcoming tasks including the production of a major structure.
keywords	digital architecture; mathematics in architecture; higher-dimensional objects in architecture; design computation and mathematics
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2011_145
id	ecaade2011_145
authors	Araújo, Leandro; Andrés, Roberto
year	2011
title	BIM.BON . A BIM system for architectural practice in Brazil
doi	https://doi.org/10.52842/conf.ecaade.2011.439
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.439-443
summary	This article discusses the difficulties faced by the BIM (Building Information Modeling) systems to be widely adopted among most part of architecture and engineering professionals in Brazil. A revision of the issue and investigation of possibilities for improving the practice of architecture were made by creating a new model of BIM software addressed to a wider audience. It lists the main critical points in the usability of BIM software, based on a survey made with 300 professionals. The analysis is followed by a study of a new BIM software that could reach a wider audience of architects by implementing a tool that directly links the users to the construction materials market, also including a tool for easy budgetary calculations.
wos	WOS:000335665500050
keywords	BIM Software; Architectural design; Architecture in Brazil; ICT; Collaborative design
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_021
id	ecaade2011_021
authors	Asanowicz, Aleksander
year	2011
title	Digital “serial vision” - new approach in urban composition teaching
doi	https://doi.org/10.52842/conf.ecaade.2011.716
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.716-724
summary	The paper discusses the following problem: How can digital technology are integrated with urban composition teaching to provide a better understanding of the aesthetical and emotional aspects of the city? It argues for the current need for an integration of computer modelling and the approaches developed form the work of K. Lynch, G. Cullen, R. Krier, F. Ching. The paper is based on the experience in design studio teaching and an experiment completed with students. The exercise shows the students that different spatial organization may cause different emotions according to the treatment of space-defining elements. The paper presents the background and context as well as describes the experimental environment and the student work.
wos	WOS:000335665500083
keywords	Urban composition; serial vision; computer animation
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadiaregional2011_029
id	acadiaregional2011_029
authors	Bell, Brad; Kevin Patrick McClellan, Andrew Vrana
year	2011
title	Reconfiguring Collaboration by Computational Means Tex-Fab: A new model for collaborative engagement
doi	https://doi.org/10.52842/conf.acadia.2011.x.f7u
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
summary	TEX-FAB is a non-profit organization founded between three universities in Texas with the primary function of connecting design professionals, academics, and manufactures interested in digital fabrication. The three co-directors established TEX-FAB as a collective action, one that attempts to combine divergent interests and capabilities, for the purpose of strengthening the regional discourse around digital fabrication and parametric design. The three primary avenues for accomplishing this goal are set out as Theoria (Lectures / Exhibitions), Poiesis (Workshops) and Praxis (Competition). We see this type of effort as a new paradigm focused on providing a network of affiliated digital fabrication resources, and a platform for education/ exchange on issues of parametric modeling. It is our position that TEX-FAB engages the new and growing awareness of a regional and global hybridization. We seek to leverage the burgeoning global knowledge base to produce a more specific and contextual dialogue within the region we operate, teach, and practice.
series	ACADIA
last changed	2022/06/07 07:49

For more results click below: