Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 553

Reformat results as: short short into frame detailed detailed into frame

_id	acadiaregional2011_009
id	acadiaregional2011_009
authors	Esquivel, Gabriel; Ryan Collier
year	2011
title	A Swell Project: Between Parametrics and Fabrication
doi	https://doi.org/10.52842/conf.acadia.2011.x.r0r
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
summary	As a case study, Swell serves as: 1) an investigation into architectural ornamentation using a contemporary framework, as directed through specific modes of research, 2) a study in fabrication materials and methods, especially through the realization of form, and 3) as a pedagogical tool, loosely assembled through real and virtual space. This essay will focus mainly on the fabrication methods in terms of why and the pedagogical research initiatives and reactions that went into the design of Swell. The project was conceived through a summer studio which was formed to investigate tools and methods available at the Texas A&M Architecture Ranch and to further the local pedagogical direction toward fabrication in architectural design at Texas A&M University as a whole. That is to say, there was no specific agenda toward parametrics, form, research, technology, or the like. At the same time, as the research continued, certain decisions were cast in terms of technology, sensibility, site, etc. informed by research, iterative processes, or parametric evaluation that ultimately formed the project as it exists today.
series	ACADIA
last changed	2022/06/07 07:49

_id	cf2011_p141
id	cf2011_p141
authors	Khan,Mohammad Ashraf; Dong Andy
year	2011
title	Using Geo-Located Augmented Reality for Community Evaluation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 701-720.
summary	Conventional practices of two-dimensional representation of three-dimensional objects remain an impediment to end-user engagement in participatory urban design. An alternative is to harness geo-located augmented reality (GAR) technology to embed life-sized virtual three-dimensional images at the actual site of proposed interventions. This format offers closest to real-life visualizations for end-users, enabling them to firstly comprehend and then express feelings concerning future proposals. This paper presents an iPhone web-app that capitalizes on the Layar browser’s GAR interface to tip the economies of scale in favor of intimately attached users of public space, rather than often remotely detached clients and their commissioned designers. Walk-around virtual images of public space designs can be viewed and commented via iPhones by the public. It further allows users to display their own ideas as alternatives, thus in effect serving as an instrument for advancement of CAAD-enabled participative environmental design in general and the idea of reclamation of authorship of public space in particular. This paper briefly describes the development of a prototype, including its preliminary evaluation, and then highlights a study to determine the 3D rendering performance parameters of GAR technology, as the core component of the idea. The paper concludes with a discussion of future implications.
keywords	Participative Environmental Design, Collaborative Architectural Design, CAAD, IPhone, End-User Engagement
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_132
id	acadia11_132
authors	MacDowell, Parke; Tomova, Diana
year	2011
title	Robotic Rod-bending: Digital Drawing in Physical Space
doi	https://doi.org/10.52842/conf.acadia.2011.132
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 132-137
summary	This paper details preliminary project-based design research that emphasizes the development of tools and processes in tandem with the development of ideas and forms. Amid increasingly mechanized fabrication processes, this project injects the human as code-writer and tool-builder, asserting authorship within the modes of production themselves. The initial output from this foray, wavePavilion is an architectural installation generated by computer algorithms and built using custom digital fabrication technology. Completed in June 2010, the project is located on the grounds of the University of Michigan Taubman College of Architecture and Urban Planning. wavePavilion has a footprint of 20x30 feet and stands 14 feet tall, containing over a kilometer of 1/4-inch diameter steel rod.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	caadria2011_067
id	caadria2011_067
authors	Neisch, Paulina
year	2011
title	Colour-code models: The concept of spatial network
doi	https://doi.org/10.52842/conf.caadria.2011.707
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 707-716
summary	The main goal for the architects or planners is to understand a perspective of the user. The foundation of the design process is to create buildings and environments, which will be both innovative and functional for all types of users, including adults and children. While planning the environments for children the particular aspects should be considered. The important questions are: What kind of contact does child have with the city, urban places and buildings? How does the child construct the picture of the city? What kind of urban or architectural spaces contributes to the relation that a child has with the environment? Most of the previous studies concentrating on creation of spaces for children have focused on the perspectives that have adults. According to CAADRIA 2010 paper, the objective of our study was to “learn about” (get to know the) children’s perception of everyday places. The main goal of the project was to define an appropriate tool for the design process. We identified three elements, which were considered to be the most important for child’s identification with environment: home, school, and the journey from home to school. For this purpose, children living in a residential community in Bangkok were surveyed. Contrariwise to the quantitative approach (Neisch, 2010), the concept of Colour – Code Models of space propose a qualitative development of this research – a graphic language which allow to understand the children’s spatial world, the novel way to analyze and present space, useful for educate architects and planners.
keywords	Spatial network; perception and representation of environment; drawing processing; data analyses; design for children
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	cf2011_p003
id	cf2011_p003
authors	Ng, Edward; Ren Chao
year	2011
title	Sustainable Planning with a Synergetic Collation of Thermal and Dynamic Characteristics of Urban Climate using Map Based Computational Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 367-382.
summary	Since 2006, half of the world’s population lives in cities. In the age of climate change, designing for quality environmental living conditions and sustainability is a topical concern. However, on the one hand, designers and city planners operate with their three dimensional city morphological data such as building shapes and volumes, forms and their spacings, and functional attributes and definition signatures. On the other hand, urban climatologists operate with their numbers and equations, quantities and signals, and normals and anomalies. Traditionally the two camps do not meet. It is a challenge to develop design tools that they can work together. Map based information system based on computational geographic information system (GIS) that is properly structured and represented offers a common language, so to speak, for the two professional groups to work together. Urban climatic map is a spatial and graphical tool with information embedded in defined layers that are collated so that planners and urban climatologists can dialogue over design issues. With various planning and meteorological data coded in defined grid resolutions onto the GIS map system, data can be synergized and collated for various understandings. This papers explains the formulation of Hong Kong’s GIS based Urban Climatic Map as an example of how the map works in practice. Using the map, zonal and district based planning decisions can be made by planners and urban climatologists that lead to new designs and policy changes.
keywords	sustainable development, urban planning, urban thermal, urban dynamics, computer tools
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_088
id	ecaade2011_088
authors	Paio, Alexandra; Reis, Joaquim; Santos, Filipe; Lopes, Pedro Faria; Eloy, Sara; Rato, Vasco
year	2011
title	Emerg.cities4all: Towards a shape grammar based computational system tool for generating a sustainable and integrated urban design
doi	https://doi.org/10.52842/conf.ecaade.2011.152
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.152-158
wos	WOS:000335665500017
summary	The ongoing research project called “Emerg.cities4all” is focused on the development of a generative computer-aided planning support system for cities and housing to low-income populations, using a descriptive method as the Shape Grammars and based on multi-agent rule-based system. The goal is to develop a system that could reveal the cultural, social and spatial dynamics involved in the genesis of informal settlements (favelas, musseques and caniços) and use it to generate contemporary humanized urban morphologies. The multi agent shape grammar implementation could generate automatically designs according to different types of users: urban planners, architect and local end users. This paper presents the methodology and the initial results of the research, using an informal settlement as a case study.
keywords	Shape grammar; Multi-agent systems; Urban design; Informal settlements; Emergcities4all
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p018
id	cf2011_p018
authors	Sokmenoglu, Ahu; Cagdas Gulen, Sariyildiz Sevil
year	2011
title	A Multi-dimensional Exploration of Urban Attributes by Data Mining
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 333-350.
summary	The paper which is proposed here will introduce an ongoing research project aiming to research data mining as a methodology of knowledge discovery in urban feature analysis. To address the increasing multi-dimensional and relational complexity of urban environments requires a multidisciplinary approach to urban analysis. This research is an attempt to establish a link between knowledge discovery methodologies and automated urban feature analysis. Therefore, in the scope of this research we apply data mining methodologies for urban analysis. Data mining is defined as to extract important patterns and trends from raw data (Witten and Frank, 2005). When applied to discover relationships between urban attributes, data mining can constitute a methodology for the analysis of multi-dimensional relational complexity of urban environments (Gil, Montenegro, Beirao and Duarte, 2009) The theoretical motivation of the research is derived by the lack of explanatory urban knowledge which is an issue since 1970‚Äôs in the area of urban research. This situation is mostly associated with deductive methods of analysis. The analysis of urban system from the perspective of few interrelated factors, without considering the multi-dimensionality of the system in a deductive fashion was not been explanatory enough. (Jacobs, 1961, Lefebvre, 1970 Harvey, 1973) To address the multi-dimensional and relational complexity of urban environments requires the consideration of diverse spatial, social, economic, cultural, morphological, environmental, political etc. features of urban entities. The main claim is that, in urban analysis, there is a need to advance from traditional one dimensional (Marshall, 2004) description and classification of urban forms (e.g. Land-use maps, Density maps) to the consideration of the simultaneous multi-dimensionality of urban systems. For this purpose, this research proposes a methodology consisting of the application of data mining as a knowledge discovery method into a GIS based conceptual urban database built out of official real data of Beyoglu. Generally, the proposed methodology is a framework for representing and analyzing urban entities represented as objects with properties (attributes). It concerns the formulation of an urban entity‚Äôs database based on both available and non-available (constructed from available data) data, and then data mining of spatial and non-spatial attributes of the urban entities. Location or position is the primary reference basis for the data that is describing urban entities. Urban entities are; building floors, buildings, building blocks, streets, geographically defined districts and neighborhoods etc. Urban attributes are district properties of locations (such as land-use, land value, slope, view and so forth) that change from one location to another. Every basic urban entity is unique in terms of its attributes. All the available qualitative and quantitative attributes that is relavant (in the mind of the analyst) and appropriate for encoding, can be coded inside the computer representation of the basic urban entity. Our methodology is applied by using the real and official, the most complex, complete and up-to-dataset of Beyoglu (a historical neighborhood of Istanbul) that is provided by the Istanbul Metropolitan Municipality (IBB). Basically, in our research, data mining in the context of urban data is introduced as a computer based, data-driven, context-specific approach for supporting analysis of urban systems without relying on any existing theories. Data mining in the context of urban data; ‚Ä¢ Can help in the design process by providing site-specific insight through deeper understanding of urban data. ‚Ä¢ Can produce results that can assist architects and urban planners at design, policy and strategy levels. ‚Ä¢ Can constitute a robust scientific base for rule definition in urban simulation applications such as urban growth prediction systems, land-use simulation models etc. In the paper, firstly we will present the framework of our research with an emphasis on its theoretical background. Afterwards we will introduce our methodology in detail and finally we will present some of important results of data mining analysis processed in Rapid Miner open-source software. Specifically, our research define a general framework for knowledge discovery in urban feature analysis and enable the usage of GIS and data mining as complementary applications in urban feature analysis. Acknowledgments I would like to thank to Nuffic, the Netherlands Organization for International Cooperation in Higher Education, for funding of this research. I would like to thank Ceyhun Burak Akgul for his support in Data Mining and to H. Serdar Kaya for his support in GIS.
keywords	urban feature analysis, data mining, urban database, urban complexity, GIS
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_065
id	caadria2011_065
authors	Paulini, Mercedes; Mary Lou Maher and Paul Murty
year	2011
title	The role of collective intelligence in design: A protocol study of online design communication
doi	https://doi.org/10.52842/conf.caadria.2011.687
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 687-696
summary	Web-enabled collective intelligence in design invites anyone to contribute to a design process through crowd-sourcing. We use a protocol analysis method to analyse the forum data on a collective intelligence web site, studying communication among individuals who are motivated to participate in the design process. A protocol analysis allows us to compare collective intelligence in design to similar studies of individual and team design. Our analysis shows that a design process that includes collective intelligence shares processes of ideation and evaluation with individual and team design, and also includes a significant amount of social networking. Including collective intelligence in design can extend the typical design team to include potential users and amateur perspectives that direct the design to be more sensitive to users’ needs and social issues, and can serve a marketing purpose.
keywords	Collective intelligence; design process; protocol analysis; design communication
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2011_058
id	caadria2011_058
authors	Reffat, Rabee M.
year	2011
title	Impact analysis of digital-based architecture curriculum on students’ learning
doi	https://doi.org/10.52842/conf.caadria.2011.609
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 609-618
summary	This paper reports the findings of assessing the impact of current digital-based architecture curriculum in architecture at KFUPM on students’ learning primarily from students’ perspectives. The paper addresses both generic and specific impacts of current digital-based architecture curriculum on students’ learning. The specific impacts include: level of achieving better understanding of the architectural issues of buildings, and impacts of media qualities on understanding architecture. The paper introduces a performance improvement plan aimed at enhancing students’ learning in the digital-based architecture curriculum and to accommodate the evolving nature of information technology applications in the building and construction industry.
keywords	Digital architecture curriculum; students’ learning; impact analysis; digital design education
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2011_009
id	caadria2011_009
authors	Anderson, Jonathon and Ming Tang
year	2011
title	Form follows parameters: Parametric modeling for fabrication and manufacturing processes
doi	https://doi.org/10.52842/conf.caadria.2011.091
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 91-100
summary	As the architectural field continues to explore the possibilities of parametric design it is important to understand that architectural computation has evolved from representations to simulation and evaluation. This paper explores the digital processes of parametric scripting as a way to generate architectural artefacts that can be realized in the physical landscape through various digital fabrication and industrial manufacturing techniques. This paper will highlight the important discoveries of the geometries and the implications the script has on the construction processes. One benefit of using parametric modelling as a component to the manufacturing pipeline is being able to explore several design iterations in the digital realm before ever realizing them in the physical landscape. Furthermore, parametric modelling allows users to control the production documentation and precision needed to manufacture. As a result, the design pipeline presented in this paper seeks to eliminate the construction processes that hinder the physical act of making architecture.
keywords	Manufacturing process; parametric modelling; 3D printing, plastic casting; mould making
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2011_004
id	caadria2011_004
authors	Coorey, Benjamin P. and Julie R. Jupp
year	2011
title	Parametric modelling and design processes: Exploringsynthesis and evaluation using a Function-Behaviour-Structure perspective
doi	https://doi.org/10.52842/conf.caadria.2011.039
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 39-48
summary	In an attempt to extend our understanding of the design process in the context of computational parametric design tools, this paper explores the relationship between and interaction of synthesis and evaluation. In establishing the importance of their coupling in parametric design the paper then explores its consequence on the design process relative to existing models of designing. A tension between designing as planning, search and exploration in parametric design is highlighted together with a conceptual framework, which draws from a situated Function-Behaviour-Structure model of design. The purpose of the framework is to facilitate these different modes of designing and is targeted at the use of parametric tools.
keywords	Design processes; parametric design; evaluation; synthesis, design models
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2011_026
id	caadria2011_026
authors	Dorta, Tomás; Yehuda Kalay, Annemarie Lesage and Edgar Pérez
year	2011
title	First steps of the augmented design studio: The interconnected Hybrid Ideation Space and the CI Loop
doi	https://doi.org/10.52842/conf.caadria.2011.271
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 271-280
summary	Professional or school design studios are essential environments for design supporting free exploration of materials and representations, analogue or digital. New technologies have moved into the studio with mixed results. Paradoxically, the use of portable computers, using Internet as collaboration channel, has actually individualized the design work and limited the support to co-creation, reinforcing individual work. The Augmented Design Studio argues for the implementation of hybrid technology, such as the Hybrid Ideation Space (HIS), in the design studio to compensate for the absence of collective local or remote efficient ideation space. This paper presents a case study showing the primary results of distant synchronous and asynchronous design collaboration supported by the interconnected HIS during an ad-hoc project and assessed by the improved Collaborative Ideation Loop (CI Loop) methodology. The HIS was installed in two universities located in different countries. We ran a research protocol in the format of a design charrette where two teams (team a: two architecture students, team b: two industrial design students) participated in the ideation of a bus shelter. This case study shows that teams were able to co-design while they were virtually “teleported” into each other’s representations.
keywords	Design studio; hybrid approach; Collaborative Ideation Loop; telepresence; Hybrid Ideation Space
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2011_069
id	caadria2011_069
authors	Fernando, Ruwan; James Steel and Robin Drogemuller
year	2011
title	Using domain specific languages in the Building Information Modelling workflow
doi	https://doi.org/10.52842/conf.caadria.2011.731
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 731-740
summary	The design of architecture, in practice, entails the collaboration of many disciplines each with their own set of tools and representations. Building Information Models aim to support interoperability between these disciplines. However current implementations require a lot of manual work involving translating parts from the various specialised descriptions to the common model format. Domain Specific Languages are a development from Information Technology that defines a mapping from the concepts used in one discipline to those used in another. In this paper, a workflow incorporating the movement between specialised languages and a central model is described. The central model is structured using the Industrial Foundation Classes (IFC). The motivation for elaborating on the interdisciplinary workflow is the desire to create a more iterative process without the need for the manual recreation of models. While it is difficult to have a description or language that contains all the information of all the disciplines, this research demonstrates how the IFC schema acts as a pivot not just between data sets, but also between concepts expressed in different representations thus giving from analysis to design.
keywords	Building Information Model; BIM; domain-specific languages; lighting; spatial planning; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2011_018
id	ecaade2011_018
authors	Grobman, Yasha J.; Ron, Ruth
year	2011
title	Digital Form Finding: Generative use of simulation processes by architects in the early stages of the design process
doi	https://doi.org/10.52842/conf.ecaade.2011.107
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.107-115
wos	WOS:000335665500012
summary	The paper presents performance oriented approaches to digital form finding which stems from the lines of research on performance and morphogenesis in architectural design. The main contribution to the earlier research is threefold; it examines the potential of the presented design processes to integrate interdisciplinary approach based on the use of simulation tools by architects or direct data exchange between simulation tools and design. Secondly, it explores new methods to generate initial architectural form based on performance information that apply to both building scale and urban scale, and lastly, it develops the theoretical framework on the ramifications of employing simulation technology and techniques in architectural design.
keywords	Form generation; performance; simulation; parametric design; form finding
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ascaad2023_091
id	ascaad2023_091
authors	Haddad, Naif
year	2023
title	From Digital Heritage Documentation to 3D Virtual Reconstruction and Recreation for Heritage Promotion and Reinterpretation: The Case of the iHeritage Project
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 7-23.
summary	In the last two decades, the digital age Information and Communication Technologies (ICT) development and concerns combined with rapid technology have permitted the dissemination of different digital applications (including digital documentation, virtual reality (VR), augmented reality (AR), mixed reality (MR), digital gaming, and holograms etc.) oriented toward past, present and future communication using digital three-dimensional audio-visual content. Today, we must acknowledge that 3D virtual 3D reconstruction and recreation has become an established way to build, understand, reinterpret, and promote Cultural Heritage (CH). The virtual 3D reconstruction world and multimedia industry are often considered potential marketing channels for World Heritage Sites (WHS) and heritage tourism. 3D digital/virtual reconstruction merges and embodies subjectivity in one process, playing an attractive role in heritage tourism destinations and creating image experiences, providing the first enjoyable interpretation and information for most audiences. Based on the EU-funded iHERITAGE project ICT Mediterranean platform for the UNESCO CH, this paper attempts to examine some insights into constructing the optimistic image of heritage promotion and tourism in the context of CH as it flows through both physical and virtual spaces to give a glimpse of the future of virtual reconstruction. It illustrates the development of the concepts and practice, challenges and opportunities, advantages and disadvantages, and the negative and the positive sides of the related issues of only 3D digital reconstructions, and some issues concerning the ethics based on the International Chartres and Conventions mainly in the field of scientific visualisation, such as the London Charter (2009) and Seville Principles (2011). Finally, as a practical dimension, it presents some representative examples of 3D digital/virtual reconstruction of characteristic monuments of the WHS of Nabataean Petra in Jordan for the first time.
series	ASCAAD
email
last changed	2024/02/13 14:40

_id	cf2011_p019
id	cf2011_p019
authors	Haeusler, Matthias Hank; Beilharz Kirsty
year	2011
title	Architecture = Computer‚ from Computational to Computing Environments
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 217-232.
summary	Drawing on architecture, urban digital media, engineering, IT and interaction design, the research presented in this paper outlines a possible shift from architecture designed through computation (any type of process, algorithm or measurement done in a computational matter) towards architecture capable of computing (developing, using and improving computer technology, computer hardware and software as a space-defining element). The research is driven by recent developments in four fields, as follows: (a) Architecture in its recent development has shifted from a planar box, as was the ideal in the modernist movement, towards complex and non-standard forms. (b) The design concepts of non-standard surfaces have been adopted into media facades and media architecture by liberating the pixel from its planar position on a screen [1]. (c) Advancements in pervasive computing applications are now able both to receive information from the environment in which they are used and to detect other devices that enter this environment [2]. (d) Developments in advanced autonomous systems such as Human Computer Interaction (HCI) or Human Robot Interaction (HRI), have produced intelligent systems capable of observing human cues and using these cues as the basis for intelligent decision-making [3]. Media fa_ßade developments work in the direction of the above-mentioned four fields, but often come with limitations in architectural integration; they need additional components to interact with their environment and their interactions are both often limited to visual interactions and require the user to act first. The researched system, Polymedia Pixel [4] discussed in this paper, can overcome these limitations and fulfil the need for a space-defining material capable of computing, thus enabling a shift from architecture designed by computation towards architecture capable of active computing. The Polymedia Pixel architecture merges digital technology with ubiquitous computing. This allows the built environment and its relation with digital technology to develop from (a) architecture being represented by computer to (b) computation being used to develop architecture and then further to where (c) architecture and the space-defining objects have computing attributes. Hence the study presented aims to consider and answer this key question: ‚ÄòWhen building components with computing capacity can define space and function as a computer at the same time, what are the constraints for the building components and what are the possible advantages for the built environment?‚Äô The conceptual framework, design and methods used in this research combine three fields: (a) hardware (architecture and design, electronic engineering) (b) software (content design and IT) and (c) interaction design (HCI and HRI). Architecture and urban design determinates the field of application. Media architecture and computer science provide the technological foundation, while the field of interaction design defines the methodology to link space and computing [5]. The conceptual starting point is to rethink the application of computers in architecture and, if architecture is capable of computing, what kind of methodology and structure would find an answer to the above core research question, and what are the implications of the question itself? The case study discusses opportunities for applying the Polymedia Pixel as an architectural component by testing it on: (a) constraint testing ‚Äì applying computational design methodologies to design space (b) singular testing - discussing the advantages for an individual building, and (c) plural testing ‚Äì investigating the potential for an urban context. The research aims to contribute to the field of knowledge through presenting first steps of a System < - > System mode where buildings can possibly watch and monitor each other, additional to the four primary interactive modes of operation. This investigation, its proposed hypothesis, methodology, implications, significance and evaluation are presented in the paper.
keywords	media architecture, computational environments, ubiquitous computing, interaction design, computer science
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: