Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 512

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p049
id	cf2011_p049
authors	Hii Jun Chung, Daniel; Chye Kiang Heng, Lai Choo Malone Lee, Ji Zhang
year	2011
title	Analyzing the Ventilation Performance of Tropical High Density Residential Precincts using Computational Fluid Dynamics
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 351-366.
summary	Major cities in the world are getting bigger as they continue to grow to cater for more population increase. These cities normally forced the urban planning to go high density. In the tropical context, high density cities like Singapore and Hong Kong do not have the luxury of space to go low rise and compact. These cities have to build to the floor area ratio of 4 and above to cater for the population. Their only solution is to go up, as high as possible, to the extent that the natural wind flow pattern will be altered, which brings environmental impact to the people. This is generally not good since wind flow helps to maintain the thermal comfort of the people as heat and pollutants are being channeled out of the city to avoid Urban Heat Island effect. In the tropical context, wind flow is crucial to maintain people‚Äôs comfort as the temperature is generally very high from the exposure of the sun for the entire year. Studies have shown that wind flow plays the most significant part in maintaining human comfort despite exposing to direct sunlight in the tropics. Therefore, wind flow analysis is extremely crucial to make the design sustainable and energy efficient, as people will not have to depend on mechanical ventilation to compensate for the lack of wind flow. Computational Fluid Dynamics (CFD) has always been used in the field of architecture, urban design and urban planning to understand the patterns of wind flow through the built environment apart from wind tunnel tests. The availability of more powerful hardware for the mainstream computer users as well as the lowering costs of these computers made CFD more possible to be adopted in the design world today. This also means using CFD in the design process, especially to analyze the impact of the design to the current site conditions and annual wind patterns will help the new design to be more responsive to the site. The interest of this paper is to analyze the high density typologies to see how well they respond to the local wind flow pattern. A typology is considered acceptable when the wind flow going through the site is still maintaining acceptable wind speed. This means it does not block off the wind and create stagnant spaces. Different designs generate different typologies which will respond differently to the wind pattern. The study aims at comparing the local high density typologies in terms of their response to the wind. Changes to a typology can be explored too to see if the performance will be different. For a typology which is considered a total failure in terms of response to wind, it may improve its performance if the orientation is altered. The CFD software can also parametrically respond to the changes of the typologies‚Äô dimensions. This is helpful to see how much more a typology can still be performing well before failure by increasing the floor area index. The easiest way to do this is to pump up the building height. In conclusion, designing in response to wind is extremely important as it is more sustainable and responsive to Urban Heat Island effect. A design which responds well to the wind patterns will help save cost of cooling load and fan expenditure. The people will also be more willing to use the outdoor spaces which will as a whole generate more vibrant city spaces. As a result, a high density city with huge population count can still enjoy good thermal comfort if the general urban planning and design respond well to wind.
keywords	computational fluid dynamics, sustainability, high density, urban design, airflow, ventilation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2011_009
id	caadria2011_009
authors	Anderson, Jonathon and Ming Tang
year	2011
title	Form follows parameters: Parametric modeling for fabrication and manufacturing processes
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 91-100
doi	https://doi.org/10.52842/conf.caadria.2011.091
summary	As the architectural field continues to explore the possibilities of parametric design it is important to understand that architectural computation has evolved from representations to simulation and evaluation. This paper explores the digital processes of parametric scripting as a way to generate architectural artefacts that can be realized in the physical landscape through various digital fabrication and industrial manufacturing techniques. This paper will highlight the important discoveries of the geometries and the implications the script has on the construction processes. One benefit of using parametric modelling as a component to the manufacturing pipeline is being able to explore several design iterations in the digital realm before ever realizing them in the physical landscape. Furthermore, parametric modelling allows users to control the production documentation and precision needed to manufacture. As a result, the design pipeline presented in this paper seeks to eliminate the construction processes that hinder the physical act of making architecture.
keywords	Manufacturing process; parametric modelling; 3D printing, plastic casting; mould making
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2011_165
id	ecaade2011_165
authors	Riether, Gernot; Jolly, Knox
year	2011
title	Flexible Systems: Flexible Design, Material and Fabrication: The AIA pavilion as a case study
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.628-634
doi	https://doi.org/10.52842/conf.ecaade.2011.628
wos	WOS:000335665500073
summary	This paper is about the fabrication process of the DesCours pavilion, a project that was realized in the context of a graduate design studio in the Fall Semester of 2010. The assembly and construction process of the pavilion will be used to show how parametric software, such as Grasshopper can inform fabrication and material systems. The paper will explain the fabrication process of a pavilion in detail and make an argument for plastic as a material that not only responds to the malleable characteristic of digital tools but also to environmental issues.
keywords	Design Build; Grasshopper; CNC; Parametric Design; Digital Fabrication; Plastic
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_077
id	ecaade2011_077
authors	Ettlinger, Or
year	2011
title	The Perceptual, the Virtual, and the Real: On the experience of place in the digital age
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.925-932
doi	https://doi.org/10.52842/conf.ecaade.2011.925
wos	WOS:000335665500106
summary	Since the dawn of philosophical thought man has questioned the validity of his experience of the world around him: Is the world just as we perceive it to be, or does its true essence lie beyond our reach? In our own time, technological, social, and economic developments have made such philosophical concerns more relevant to our everyday lives than ever before. However, the available terminology for discussing such matters is often too limited to fully capture their nature. This paper proposes a consistent terminology for the discussion of such matters and suggests a model of the different aspects from which they are comprised. This terminology will be applied to, as well as presented through, issues that are pertinent to architectural theory, to the experience of places, and to the intangible sense of place which digital phenomena can sometimes provide.
keywords	Architectural theory; media theory; perceptual; virtual; real
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_060
id	sigradi2011_060
authors	Fonseca, David; Navarro, Isidro; Puig, Janina
year	2011
title	Códigos QR aplicados a la visualización de elementos arquitectónicos [QR Codes applied to architectural visualization ]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 548-551
summary	In recent years it has popularized the use of two-dimensional codes associated with all types of information. Usually we can find them in advertisements, receipts and all kinds of tickets, but also they can have good use in teaching. The architecture is a field that has incorporated its use especially in aspects related to leisure and tourism. The research presented in this paper seeks the introduction of QR codes in an active way in architectural education, with the optimization of all type of information associated to each type of user and projects.
keywords	QR-Codes; architecture; education; visualization; user profile
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_160
id	acadia11_160
authors	Kudless, Andrew
year	2011
title	Gordian Knots and Endless Loops
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 160-161
doi	https://doi.org/10.52842/conf.acadia.2011.160
summary	Despite the current buzz surrounding the concept of integrative design, architects have always attempted to form greater wholes from disparate parts. It is nearly redundant to pair the words “integrative” and “design” together as what is design without integration? At the most fundamental level, good design must synthesize different and often conflicting parameters in order to achieve some higher level of performance. So why has the term “integrative design” emerged to described the contemporary design paradigm?
series	ACADIA
type	moderator overview
email
last changed	2022/06/07 07:52

_id	ijac20109203
id	ijac20109203
authors	Martini, Kirk
year	2011
title	Optimization and parametric modelling to support conceptual structural design
source	International Journal of Architectural Computing vol. 9 - no. 2, 151-166
summary	The paper describes software combining parametric geometric modeling with a version of the harmony search method, modified to support multimodal structural optimization. Researchers have recognized the potential of population-based optimization methods, such as genetic algorithms, to support multimodal optimization: that is, generating a diverse range of good alternative solutions, rather than a single best solution. Among these methods is the harmony search method, which has been demonstrated to be efficient in many unimodal structural optimization problems. The paper describes a new version of the harmony search method, implemented as an assembly within Bentley's Generative Components, enabling high-level control of geometry. The new method is demonstrated on an bridge supported by two inclined parabolic arches, a structure where GC controls a complex geometry with a single variable. Comparative studies of the example find that the new method is more effective than conventional harmony search in consistently finding multiple good solutions.
series	journal
last changed	2019/05/24 09:55

_id	cf2011_p016
id	cf2011_p016
authors	Merrick, Kathryn; Gu Ning
year	2011
title	Supporting Collective Intelligence for Design in Virtual Worlds: A Case Study of the Lego Universe
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 637-652.
summary	Virtual worlds are multi-faceted technologies. Facets of virtual worlds include graphical simulation tools, communication, design and modelling tools, artificial intelligence, network structure, persistent object-oriented infrastructure, economy, governance and user presence and interaction. Recent studies (Merrick et al., 2010) and applications (Rosenman et al., 2006; Maher et al., 2006) have shown that the combination of design, modelling and communication tools, and artificial intelligence in virtual worlds makes them suitable platforms for supporting collaborative design, including human-human collaboration and human-computer co-creativity. Virtual worlds are also coming to be recognised as a platform for collective intelligence (Levy, 1997), a form of group intelligence that emerges from collaboration and competition among large numbers of individuals. Because of the close relationship between design, communication and virtual world technologies, there appears a strong possibility of using virtual worlds to harness collective intelligence for supporting upcoming ‚Äúdesign challenges on a much larger scale as we become an increasingly global and technological society‚Äù (Maher et al, 2010), beyond the current support for small-scale collaborative design teams. Collaborative design is relatively well studied and is characterised by small-scale, carefully structured design teams, usually comprising design professionals with a good understanding of the design task at hand. All team members are generally motivated and have the skills required to structure the shared solution space and to complete the design task. In contrast, collective design (Maher et al, 2010) is characterised by a very large number of participants ranging from professional designers to design novices, who may need to be motivated to participate, whose contributions may not be directly utilised for design purposes, and who may need to learn some or all of the skills required to complete the task. Thus the facets of virtual worlds required to support collective design differ from those required to support collaborative design. Specifically, in addition to design, communication and artificial intelligence tools, various interpretive, mapping and educational tools together with appropriate motivational and reward systems may be required to inform, teach and motivate virtual world users to contribute and direct their inputs to desired design purposes. Many of these world facets are well understood by computer game developers, as level systems, quests or plot and achievement/reward systems. This suggests the possibility of drawing on or adapting computer gaming technologies as a basis for harnessing collective intelligence in design. Existing virtual worlds that permit open-ended design ‚Äì such as Second Life and There ‚Äì are not specifically game worlds as they do not have extensive level, quest and reward systems in the same way as game worlds like World of Warcraft or Ultima Online. As such, while Second Life and There demonstrate emergent design, they do not have the game-specific facets that focus users towards solving specific problems required for harnessing collective intelligence. However, a new massively multiplayer virtual world is soon to be released that combines open-ended design tools with levels, quests and achievement systems. This world is called Lego Universe (www.legouniverse.com). This paper presents technology spaces for the facets of virtual worlds that can contribute to the support of collective intelligence in design, including design and modelling tools, communication tools, artificial intelligence, level system, motivation, governance and other related facets. We discuss how these facets support the design, communication, motivational and educational requirements of collective intelligence applications. The paper concludes with a case study of Lego Universe, with reference to the technology spaces defined above. We evaluate the potential of this or similar tools to move design beyond the individual and small-scale design teams to harness large-scale collective intelligence. We also consider the types of design tasks that might best be addressed in this manner.
keywords	collective intelligence, collective design, virtual worlds, computer games
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p093
id	cf2011_p093
authors	Nguyen, Thi Lan Truc; Tan Beng Kiang
year	2011
title	Understanding Shared Space for Informal Interaction among Geographically Distributed Teams
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 41-54.
summary	In a design project, much creative work is done in teams, thus requires spaces for collaborative works such as conference rooms, project rooms and chill-out areas. These spaces are designed to provide an atmosphere conducive to discussion and communication ranging from formal meetings to informal communication. According to Kraut et al (E.Kraut et al., 1990), informal communication is an important factor for the success of collaboration and is defined as ‚Äúconversations take place at the time, with the participants, and about the topics at hand. It often occurs spontaneously by chance and in face-to-face manner. As shown in many research, much of good and creative ideas originate from impromptu meeting rather than in a formal meeting (Grajewski, 1993, A.Isaacs et al., 1997). Therefore, the places for informal communication are taken into account in workplace design and scattered throughout the building in order to stimulate face-to-face interaction, especially serendipitous communication among different groups across disciplines such as engineering, technology, design and so forth. Nowadays, team members of a project are not confined to people working in one location but are spread widely with geographically distributed collaborations. Being separated by long physical distance, informal interaction by chance is impossible since people are not co-located. In order to maintain the benefit of informal interaction in collaborative works, research endeavor has developed a variety ways to shorten the physical distance and bring people together in one shared space. Technologies to support informal interaction at a distance include video-based technologies, virtual reality technologies, location-based technologies and ubiquitous technologies. These technologies facilitate people to stay aware of other‚Äôs availability in distributed environment and to socialize and interact in a multi-users virtual environment. Each type of applications supports informal interaction through the employed technology characteristics. One of the conditions for promoting frequent and impromptu face-to-face communication is being co-located in one space in which the spatial settings play as catalyst to increase the likelihood for frequent encounter. Therefore, this paper analyses the degree to which sense of shared space is supported by these technical approaches. This analysis helps to identify the trade-off features of each shared space technology and its current problems. A taxonomy of shared space is introduced based on three types of shared space technologies for supporting informal interaction. These types are named as shared physical environments, collaborative virtual environments and mixed reality environments and are ordered increasingly towards the reality of sense of shared space. Based on the problem learnt from other technical approaches and the nature of informal interaction, this paper proposes physical-virtual shared space for supporting intended and opportunistic informal interaction. The shared space will be created by augmenting a 3D collaborative virtual environment (CVE) with real world scene at the virtual world side; and blending the CVE scene to the physical settings at the real world side. Given this, the two spaces are merged into one global structure. With augmented view of the real world, geographically distributed co-workers who populate the 3D CVE are facilitated to encounter and interact with their real world counterparts in a meaningful and natural manner.
keywords	shared space, collaborative virtual environment, informal interaction, intended interaction, opportunistic interaction
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p115
id	cf2011_p115
authors	Pohl, Ingrid; Hirschberg Urs
year	2011
title	Sensitive Voxel - A reactive tangible surface
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 525-538.
summary	Haptic and tactile sensations, the active or passive exploration of our built surroundings through our sense of touch, give us a direct feeling and detailed information of space, a sense of architecture (Pallasmaa 2005). This paper presents the prototype of a reactive surface system, which focuses its output on the sense of touch. It explains how touch sensations influence the perception of architecture and discusses potential applications that might arise from such systems in the future. A growing number of projects demonstrate the strong impact of interaction design on the human senses and perception. They offer new ways of sensing and experiencing architectural space. But the majority of these interaction concepts focus on visual and auditory output-effects. The sense of touch is typically used as an input generator, but neglected as as a potential receiver of stimuli. With all the possibilities of sensors and micro-devices available nowadays, there is no longer a technical reason for this. It is possible to explore a much wider range of sense responding projects, to broaden the horizon of sensitive interaction concepts (Bullivant 2006). What if the surfaces of our surroundings can actively change the way it feels to touch them? What if things like walls and furniture get the ability to interactively respond to our touch? What new dimensions of communication and esthetic experience will open up when we conceive of tangibility in this bi-directional way? This paper presents a prototype system aimed at exploring these very questions. The prototype consists of a grid of tangible embedded cells, each one combining three kinds of actuators to produce divergent touch stimuli. All cells can be individually controlled from an interactive computer program. By providing a layering of different combinations and impulse intensities, the grid structure enables altering patterns of actuation. Thus it can be employed to explore a sort of individual touch aesthetic, for which - in order to differentiate it from established types of aesthetic experiences - we have created the term 'Euhaptics' (from the Greek ŒµœÖ = good and Œ¨œÄœÑœâ = touch, finger). The possibility to mix a wide range of actuators leads to blending options of touch stimuli. The sense of touch has an expanded perception- spectrum, which can be exploited by this technically embedded superposition. The juxtaposed arrangement of identical multilayered cell-units offers blending and pattern effects of different touch-stimuli. It reveals an augmented form of interaction with surfaces and interactive material structures. The combination of impulses does not need to be fixed a priori; it can be adjusted during the process of use. Thus the sensation of touch can be made personally unique in its qualities. The application on architectural shapes and surfaces allows the user to feel the sensations in a holistic manner ‚Äì potentially on the entire body. Hence the various dimensions of touch phenomena on the skin can be explored through empirical investigations by the prototype construction. The prototype system presented in the paper is limited in size and resolution, but its functionality suggests various directions of further development. In architectural applications, this new form of overlay may lead to create augmented environments that let inhabitants experience multimodal touch sensations. By interactively controlling the sensual patterns, such environments could get a unique ‚Äútouch‚Äù for every person that inhabit them. But there may be further applications that go beyond the interactive configuration of comfort, possibly opening up new forms of communication for handicapped people or applications in medical and therapeutic fields (Grunwald 2001). The well-known influence of touch- sensations on human psychological processes and moreover their bodily implications suggest that there is a wide scope of beneficial utilisations yet to be investigated.
keywords	Sensitive Voxel- A reactive tangible surface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20109202
id	ijac20109202
authors	van Embden, Maria Vera; Andres, Michela Turrin, Peter von Buelow
year	2011
title	ARCHITECTURAL DNA: A genetic exploration of complex structures
source	International Journal of Architectural Computing vol. 9 - no. 2, 133-150
summary	The approach demonstrated in this paper uses Evolutionary Computation (EC) to enhance and modify structural form based on biological micro structures.The forms are modified to conform to new boundary conditions associated with architectural structures.The process is based on a Genetic Algorithm (GA) which visually exposes for the designer a range of good performing solutions within thedesign space. The application of the GA is combined with parametric software, in this case Generative Components (GC). The program described here as ParaGen (Parametric Genetic Algorithm), uses a Finite Element Analysis (FEA) to determine the structural performance of the forms.This allows the designer to manipulate and optimize a parametrically defined model based on predefined criteria and parameters.The opportunities and limitations of this design process are explored and evaluated based on an experimental case study using topologies based on radiolarian skeletons.The design procedure described includes user interaction in the exploration of solutions that perform well both for the explicitly defined programmatic criteria (structural) as well as for the implicit criteria provided by the designer (visual aesthetic).
keywords	structural morphology, parametric design, genetic algorithm, structural optimization.
series	journal
last changed	2019/05/24 09:55

_id	caadria2011_037
id	caadria2011_037
authors	Vaz, Carlos V.; Gabriela Celani and José P. Duarte
year	2011
title	An ontology representing Roberto Burle Marx’s landscape design solutions
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 389-398
doi	https://doi.org/10.52842/conf.caadria.2011.389
summary	The objective of this undergoing research project is to propose a new approach to landscape design education, based on design cognition and computational design theories, such as patterns, shape grammars and parametric design. The system is based on an ontology that contains classes of design concepts and examples of their instances. This paper shows specifically the development of the ontology that will structure the whole system. The information necessary to understand each of the design concepts is represented by a schematic shape grammar rule. Each concept will be illustrated by a good example of application, extracted from the work of Brazilian landscape designer Roberto Burle Marx. A prototypical implementation of the system is being developed, with a hierarchical taxonomy of the concepts and examples.
keywords	Ontology; landscape design education; Roberto Burle Marx; landscape architecture; pattern language
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2011_032
id	caadria2011_032
authors	Barker, Tom; Nicole Gardner, M. Hank Haeusler and Martin Tomitsch
year	2011
title	Last train to trancentral: From infrastructure to ‘info’structure: a case study of embedding digital technology into existing public transport infrastructures
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 335-344
doi	https://doi.org/10.52842/conf.caadria.2011.335
summary	The research presented in this paper is an investigation into how ubiquitous computing technologies can contribute to improving the quality of existing public transport environments through the integration of responsive technologies. The paper argues that given the significant challenges associated with transport infrastructure expansion including cost, disruption, energy use, and implementation periods augmenting existing transport environments offers alternate measures to manage demand and improve the user experience. The paper proposes improving transport environments by integrating smart, or responsive, digital information into the existing physical fabric in a coherent architectural and spatial context. This approach offers an opportunity to shift away from the static nature of public transport infrastructure to the dynamic notion of public transport ‘info’structure. The research uses an architecture graduate studio as a foundation to investigate the objectives. The contribution of this paper is an investigation of ways in which digital technologies and networked communications can transform and augment public transport infrastructure, allowing new forms of intelligent, adaptive, interactive and self-aware architecture to be developed.
keywords	Urban Informatics; media facades; public transport; responsive technologies; smart environments
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia11_316
id	acadia11_316
authors	d’Estree Sterk, Tristan
year	2011
title	Using Robotic Technologies to Integrate External Influences in Design
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 316-317
doi	https://doi.org/10.52842/conf.acadia.2011.316
summary	Designers have always assembled materials to form purposeful connections between ideas and spaces, uniting the height of human thought with the great ability of people to shape the world with their hands and tools. People have understood this opportunity and used it to inform the material investments that they make in buildings.When reflecting upon the past ten or so years of practice it is clear that some methodologies have matured. Professionals, academics and students have found new ways to connect thinking and doing. These connections have a different flavor and tend to feel more analytical to those once used. Previously internalized decisions are being made increasingly explicit by a generation of designers that has found a more meaningful overlap between the theories and procedures of design. The methods they use are visual, analytical, as well as intuitive, and encompassed within a whole gamut of tools such as Grasshopper, Ecotect, Digital Project and Generative Components. All of these tools provide opportunities for designers to inquisitively explore alternative formal, spatial and environmental relationships. The opportunities that are brought by increasing externalization are important. Design is at once turning away from its focus on the end result, be it a building or an interior, and toward a renewed interest in the design process itself. Brought about by encapsulating design principles into self-made tools, this shift has enabled families of formal outcomes rather than singular instances of ‘pure’ architecture. These multiple, equally valid, formal outcomes disrupt more traditional measures of formal legitimacy and help move architects toward more relational understandings of space, time and environment.
series	ACADIA
type	moderator overview
email
last changed	2022/06/07 07:55

_id	eaea2015_t1_paper05
id	eaea2015_t1_paper05
authors	Lobo de Carvalho, Jose Maria; Heitor, Teresa
year	2015
title	The Adaptive Reuse of the Arco do Cego ancient Car-Barn Structure in Lisbon
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.61-70
summary	This paper presents the example of the reconversion of an important tram station from the origins of electricity in Portugal that was still in use until the late 1990’s but became redundant since then. Its significant urban presence and the importance of preserving the memory of the old trams that were still in use some years ago in Lisbon, led to an innovative solution, combining public value and heritage protection. In 2011, the Lisbon City Council agreed to give the building and its site for university use, namely to be transformed into a student’s facility, as a study, leisure, recreational and cultural space of the IST, open 24h a day. This new university building, located just one block away from the traditional IST compound, was called IST Learning Center and extended the notion of campus outside its walls and into the city’s urban fabric.
keywords	reconversion; university; tram
series	EAEA
email
last changed	2016/04/22 11:52

_id	caadria2011_056
id	caadria2011_056
authors	Schnabel, Marc Aurel and Jeremy J. Ham
year	2011
title	The social network virtual design studio: Integrated design learning using blended learning environments
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 589-598
doi	https://doi.org/10.52842/conf.caadria.2011.589
summary	Online communications, multimedia, mobile computing and face-to-face learning create blended learning environments to which some Virtual Design Studios (VDS) have reacted to. Social Networks (SN), as instruments for communication, have provided a potentially fruitful operative base for VDS. These technologies transfer communication, leadership, democratic interaction, teamwork, social engagement and responsibility away from the design tutors to the participants. The implementation of Social Network VDS (SNVDS) moved the VDS beyond its conventional realm and enabled students to develop architectural design that is embedded into a community of learners and expertise both online and offline. Problem-based learning (PBL) becomes an iterative and reflexive process facilitating deep learning. The paper discusses details of the SNVDS, its pedagogical implications to PBL, and presents how the SNVDS is successful in enabling architectural students to collaborate and communicate design proposals that integrate a variety of skills, deep learning, knowledge and construction with a rich learning experience.
keywords	VDS; social networking; social learning; problem-based learning; PBL; Web2.0
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2011_093
id	ecaade2011_093
authors	Veliz, Alejandro; Sills, Pablo
year	2011
title	Digital design of reconstruction proposals in Chile
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.673-678
doi	https://doi.org/10.52842/conf.ecaade.2011.673
wos	WOS:000335665500078
summary	After the earthquake and tsunami occurred in Chile on February 27th 2010, the Technical University Federico Santa Maria was asked to contribute with reconstruction proposals for the commercial infrastructure destroyed in the town “San Juan Bautista”. Located 600 km (~370 mi) away from the continent, this town is not just the home of several endemic species, but is also located next to a National Protected Area and UNESCO Biosphere Reserve. Within this context, the design problem consisted on the development of a component-based strategy and prefabrication requirements, and to reduce to the minimum the implied logistics and environmental impacts of the new buildings. With a Studio of 23 final year students and the support of the Architecture Firms Association, 11 projects were developed using digital tools such as visual programming and digital fabrication. Finally, technical documentation was produced and delivered to the local and government authorities.
keywords	Visual programming; post-disaster reconstruction; prefabrication; constraintbased design; building components
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadiaregional2011_018
id	acadiaregional2011_018
authors	Vrana, Andrew; Joe Meppelink
year	2011
title	Perforating Material Performance: Ceiling Cloud
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.j6t
summary	The focus of this project was to design a ceiling system within a new Materials Resource Center in the Architecture Building that would embody the potential of parametric design and digital fabrication to rethink a generic interior architectural system. The instructors and students in a combined design studio and digital fabrication seminar developed a Ceiling Cloud that clips on to a modified suspended ceiling grid using lightweight folded aluminum panels that are designed to incrementally change dimension and drape into the space below. Constraints and variables within the parametric models allowed for the optimization and extraction of 150 unique panels that are also perforated with their own individual pattern. The variations in the folded surface disburse and dissipate sound through refraction and absorption created by the corrugation in the panels and their perforation. The holes are also calibrated as a gradient to allow more light to penetrate in the center of the space away from the perimeter walls. The project was prototyped by the students as the College of Architecture and partially realized with the help of industrial partners in Houston. The studio was co-directed with Visiting Critic Scott Marble who provided a framework to conduct the studio’s exploration and several successful projects as precedent.
series	ACADIA
last changed	2022/06/07 07:49

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: