Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 561

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20119401
id	ijac20119401
authors	Ko, Kaon; Salvator-John Liotta
year	2011
title	Decoding Culture Parametrically: Digital Tea House Case Studies
source	International Journal of Architectural Computing vol. 9 - no. 4, 325-338
summary	This paper reviews the Digital Tea House, a workshop held at the University of Tokyo with the aim to build three pavilions for hosting tea ceremony.As first attempts on cultivating formal innovations resulting from digital design process applied to construction of tea houses, the works convey that parametric design can be a mechanism through which architects are able to produce new images of a tea house and renew its conceptual meanings, and that it can be a tool to retain architecture convergent with cultural values.The authors analyze issues addressed in the workshop that range from applications of computational design, interpretations of tradition, structural stability, to solutions for quick physical materialization within limited time and budget.This paper clarifies the following: First, that parametric processes are not contradictory to traditional cultural principles; and second, how traditional elements of the tea house were decoded and formally reinterpreted through parametric designs.
series	journal
last changed	2019/07/30 10:55

_id	eaea2015_t1_paper05
id	eaea2015_t1_paper05
authors	Lobo de Carvalho, Jose Maria; Heitor, Teresa
year	2015
title	The Adaptive Reuse of the Arco do Cego ancient Car-Barn Structure in Lisbon
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.61-70
summary	This paper presents the example of the reconversion of an important tram station from the origins of electricity in Portugal that was still in use until the late 1990’s but became redundant since then. Its significant urban presence and the importance of preserving the memory of the old trams that were still in use some years ago in Lisbon, led to an innovative solution, combining public value and heritage protection. In 2011, the Lisbon City Council agreed to give the building and its site for university use, namely to be transformed into a student’s facility, as a study, leisure, recreational and cultural space of the IST, open 24h a day. This new university building, located just one block away from the traditional IST compound, was called IST Learning Center and extended the notion of campus outside its walls and into the city’s urban fabric.
keywords	reconversion; university; tram
series	EAEA
email
last changed	2016/04/22 11:52

_id	cf2011_p152
id	cf2011_p152
authors	Plume, Jim; Mitchell John
year	2011
title	An Urban Information Framework to support Planning, Decision-Making & Urban Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 653-668.
summary	This paper reports on a 2-year research project undertaken in collaboration with a state planning authority, a major city municipal council and a government-owned development organisation. The project has involved the design of an urban information model framework with the aim of supporting more informed urban planning by addressing the intersection where an individual building interfaces with its urban context. This adopted approach enables new techniques that better model the city and its processes in a transparent and accessible manner. The primary driver for this project was the challenge provided by the essential incompatibility between legacy GIS (geographic information system) datasets and BIM (building information model) representations of the built form. When dealing with urban scale information, GIS technologies use an overlay mapping metaphor linked to traditional relational database technologies to identify features or regions in the urban landscape and attach attribute data to those in order to permit analysis and informed assessment of the urban form. On the other hand, BIM technologies adopt an object-oriented approach to model the full three-dimensional characteristics of built forms in a way that captures both the geometric and physical attributes of the parts that make up a building, as well as the relationships between those parts and the spaces defined by the building fabric. The latter provides a far richer semantic structure to the data, while the former provides robust tools for a wide range of urban analyses. Both approaches are widely recognised as serving well the needs of their respective domains, but there is a widespread belief that we need to reconcile the two disparate approaches to modelling the real world. This project has sought to address that disjunction between modelling approaches. The UrbanIT project concentrated on two aspects of this issue: the development of a framework for managing information at the precinct and building level through the adoption of an object-oriented database technology that provides a platform for information management; and an exploration of ontology tools and how they can be adopted to facilitate semantic information queries across diverse data sources based on a common urban ontology. This paper is focussed on the first of those two agendas, examining the context of the work, the challenges addressed by the framework and the structure of our solution. A prototype implementation of the framework is illustrated through an urban precinct currently undergoing renewal and redevelopment, finishing with a discussion of future work that comes out of this project. Our approach to the implementation of the urban information model has been to propose extensions to ISO/PAS 16739, the international standard for modelling building information that is commonly known as IFC (Industry Foundation Classes). Our reason for adopting that approach is primarily our deep commitment to the adoption of open standards to facilitate the exchange of information across the built environment professions, but also because IFC is based on a robust object schema that can be used to construct a internet-accessible database able, theoretically, to handle the vast quantity of data needed to model urban-scale information. The database solution comes with well-established protocols for handling data security, integrity, versioning and transaction processing or querying. A central issue addressed through this work is concerned with level of detail. An urban information model permits a very precise and detailed representation of an urban precinct, while many planning analyses rely on simplified object representations. We will show that a key benefit of our approach is the ability to simultaneously maintain multiple representations of objects, making use of the concept of model view definitions to manage diverse analysis needs.
keywords	urban information modelling, geographic information systems, city models, interoperability, urban planning, open standards
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_40
id	acadia11_40
authors	Weinstock, Michael
year	2011
title	The Architecture of Flows: Integrated Infrastructures and the ‘Metasystem’ of Urban Metabolism
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 40-43
doi	https://doi.org/10.52842/conf.acadia.2011.040
summary	The traditional approach to urban design studies has been based on what can be described as a generalised anatomical model, e.g., functional zoning coupled to metaphors such as green areas serving as the ‘lungs’ of cities. Despite the frequent use of biological metaphors, urban design has generally proceeded from an understanding of cities as static arrays of buildings and infrastructures that exist in, but are distinct from, stable environments. But this approach does not reflect the dynamic systems of cities throughout history, nor their close coupling to the dynamics of their local environment, climate and ecology, and now the global dynamics of culture and economy. The limitations of this approach, in which cities are treated as discrete artefacts, rather than nodes interconnected by multiple networks, are compounded by the legal and regulatory boundary of the city usually being defined as an older core, so that cities are regarded as something quite separate from their surrounding territory. All cities have administrative boundaries, but cities are very rarely either physically or energetically contained within those administrative boundaries. In the past, cities gathered most of the energy and materials they needed from their immediate local territory, and trade linked systems of cities across whole regions. The growth and vitality of many cities are no longer dependent on the spatial relationship with their immediate environs but on the regional and global flows of resources. The flow of materials, information and energy through cities comes from far outside their physical and regulatory (municipal) boundaries. Cities now extend their metabolic systems over very great distances, so that the extended territory of the urban metabolism of a city and its geographical ‘place’ are often completely decoupled.
series	ACADIA
type	keynote paper
email
last changed	2022/06/07 07:58

_id	ecaade2011_022
id	ecaade2011_022
authors	Achten, Henri
year	2011
title	Degrees of Interaction: Towards a Classification
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.565-572
doi	https://doi.org/10.52842/conf.ecaade.2011.565
wos	WOS:000335665500065
summary	In architecture various approaches have been developed do deal with changing demands on the building. The most recent development is interactive architecture. In this paper we aim to outline what interactive architecture is. First we define the type of performance behavior that an interactive building or environment has. Following, we consider the relation between the system and the user. We derive four types of relations, characterized as “perfect butler,” “partner,” “environmental,” and “wizard.” Interactive systems are composed of sensors, controllers, actuators, and materials. Various degrees of interactivity can be achieved with such systems, ranging from passive, reactive, autonomous, to agent systems. Complete with earlier discussion of design methods this provides the range of aspects that should be considered when designing interactive architecture.
keywords	Interactive architecture; Human-Computer interaction; design theory
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ascaad2016_013
id	ascaad2016_013
authors	Belkis Öksüz, Elif
year	2016
title	Parametricism for Urban Aesthetics - A flawless order behind chaos or an over-design of complexity
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 105-112
summary	Over the last decade, paradigm shifts in the philosophy of space-time relations, the change from space-time to spatio-temporality, caused significant changes in the design field, and introduced new variations and discourses for parametric approaches in architecture. Among all the discourses, parametricism is likely the most spectacular one. The founder of parametricism, Patrik Schumacher (2009) describes it as “a new style,” which has “the superior capacity to articulate programmatic complexity;” and “aesthetically, it is the elegance of ordered complexity in the sense of seamless fluidity.” In its theoretical background, Schumacher (2011) affiliates this style with the philosophy of autopoiesis, the philosophy that stands between making and becoming. Additionally, parametricism concerns not only the physical geometry in making of form; but also discusses the relational and causal aspects in becoming of form. In other words, it brings the aesthetic qualities in making through the topological intelligence behind becoming. Regarding that, parametricism seems an effective way of managing /creating complex topologies in form-related issues. However, when it comes to practice, there are some challenging points of parametricism in large-scale design studies. Thus, this work underlines that the dominance of elegance for urban planning has the potential of limiting the flexible and dynamic topology of the urban context, and objectifying the whole complex urban form as an over-designed product. For an aesthetic inquiry into urban parametricism, this paper highlights the challenging issues behind the aesthetic premises of parametricism at the urban design scale. For that, Kartal Master Plan Design Proposal by Zaha Hadid Architects (2006) will be discussed as an exemplary work.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	sigradi2011_359
id	sigradi2011_359
authors	Bessone, Miriam; Milone, Diego; Irsuta, Maximiliano
year	2011
title	Relaciones sinestésicas entre la música y la forma visual: hacia una identificación automatizada a través de métodos computacionales [Synaesthetic relations between music and visual shapes: towards automated identification using computational methods]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 289-293
summary	In this paper, relations between music and visual perception are investigated using statistical analisys of the entailment made amongst them by different subjects in several experimental situations designed for such purpose. The goal, is to discover a set of elements and management mechanisms that are common to both field, from wich it is posible to detect significant constants and discard atypical relations. Finally, we will seek to develop a series of mathematical models that may be implemented as software to analize music and synthesis of forms, and simulate human analisys of relations between them.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2011_066
id	ecaade2011_066
authors	de Boissieu, Aurélie; Lecourtois, Caroline; Guéna, François
year	2011
title	“Operation of parametric modelling” and/or “operation of architectural conception”?: Expressing relationships in parametric modelling
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.530-538
doi	https://doi.org/10.52842/conf.ecaade.2011.530
wos	WOS:000335665500061
summary	This research paper presents a specific understanding of the relations between parametric modelling activities and architectural conception activities. Our main question is: Can we make a distinction between cognitive operations of parametric modelling and cognitive operations of architectural conception? To shed light on this question, this paper is leaning on analyses of some uses of the parametric modeler Digital Project. The cases studies are students’ projects from two Architecture Studios: the Cross Over Studio of the Universität die Angewandte in Vienna; and the Studio P9 Digital Knowledge of the Ecole Nationale Supérieure d’Architecture de Paris Malaquais in Paris. Our main result is the observation of a distinction between cognitive operations of parametric modelling and cognitive operations of architectural conception. The distinction of these two kinds of operations leads at questioning the relation between them. We have questioned these relations in terms of induction from one to another. But some interesting merging of these two kinds of operations appeared also.
keywords	Architectural design; parametric modelling; expressing relationship; Teaching; Digital Project
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_036
id	ecaade2011_036
authors	Gmelin, Sebastian; Agger, Kristian; Lassen, Michael Henry
year	2011
title	Simulation Design Tools: Using Parametric Building Information Modeling and Physical Simulation for Form Finding of Double Curved Surfaces
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.215-224
doi	https://doi.org/10.52842/conf.ecaade.2011.215
wos	WOS:000335665500024
summary	Parametric modeling is a powerful tool to create variations of a design following specified criteria. Physical modeling provides flexible relationships between design elements and can simulate the behavior of hanging chain models. Building Information Modeling can contain geometry and design properties and relations. In this paper it is proposed to join all three to create a Simulation Design Tool that allows the intuitive creation of double curved surfaces which follow the rules of funicular systems. This tool is implemented in B-Processor, open-source Building Information Modeling software to bridge the break that occurs when moving from a design software package to Building Information Modeling. It is shown how the tool balances intuitive sculpting and accurate simulation and how the user can interact to mediate different design requirements.
keywords	Form Finding; Parametric Building Information Modeling; B-Processor; Particle Spring System; Grid Shell
series	eCAADe
email
last changed	2022/05/01 23:21

_id	eaea2009_kardos_plachtinska
id	eaea2009_kardos_plachtinska
authors	Kardos, Peter; Petra Plachtinska
year	2011
title	Spatial Experience in Real & Virtual Environment as an Urban Design Tool
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 59-64
summary	The innovations of information technologies and the new possibilities of multimedia exploitation in the realm of architectural design and education are supporting the development of image communication methods on the basis of interactivity. The creative process of searching and decision-making in the urban design studio of our Faculty is supported by spatial modeling methods. The draft is sketched in modeling material on a working model. From the didactic point of view, relevant are mainly those phases, in which is possible, in the imaginative way, to support the searching and decision making process with the aim to test, compare and continuously evaluate the fulfillment of the hypothetic intentions of the solution responsibilities. The model becomes an interactive medium of cooperation between teacher and the working group of students. From the view of design crystallization, the dominant phases, in the creative process, are examining, verification, and simulation. The alternatives of material-compositional content and the spatial performance charts of modeled physical structure are verifying and the visual experience of the anticipated urban environment is simulated by the author, but also through the future client’s eyes. The alternation of the composition’s spatial configurations is generally appreciated by the static visual verification in the endoscopic horizon like the architectural spatial studies. The effective method of the progress generates a creative atmosphere for the generative thinking and design. The laboratory simulation of spatial experiences and their evaluation is performed following the perception psychology relations. The simulation of digestion of the new spatial reality intervenes the customer’s identification and guides to subjective approaches towards the quality and complexity of the formed environment. The simulation is performed in motion in order to be able to anticipate the dynamic continuity of subjective spatial imagination. The induced atmosphere will direct the evaluational attitudes of authors on comparison and selection of the successful alternatives. In our fee, we will present the demonstrations of selected static and dynamic notations of image sequences prepared in our laboratory. The presentations have been created in order to analyze, verify and offer imaginative support to creative findings in result of fulfilling the studio design tasks in the educational process. The main one is the design of urban spatial structures. The laboratory methodology is in the first place oriented on the analogue-digital procedures of "endoscope" model simulation. At the same time it also explores and looks for new unconventional forms of visual communication or archiving as imagination support to specialist and laymen participants in creative, valorization and approval processes.
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2011_426
id	sigradi2011_426
authors	Marqueto, Priscilla; Tramontano, Marcelo
year	2011
title	[Entre] territórios: reflexões a partir de comunicação à distância entre grupos de conjuntos habitacionais de interesse social [[Between] territories: reflections from distance communication between groups of social housing]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 324-327
summary	This paper describes and reflects about the assumptions of an ongoing research at Nomads.usp that seeks to relate spatial appropriations and ways of life in different locations, by constitution of a third spatiality in virtual instance, via digital media. The outline of research is delimited by relations between two geographically distinct neighborhoods, but with very similar physical spaces, and in opposition to this, idiosyncratic appropriations, uses and social conformations. To this end, the comparison between population aspects and reports of Waldomiro Lobbe Sobrinho Housing in São Carlos, and Cidade Tiradentes, in São Paulo, stood as means of reflecting on social and urban phenomena from the mediation of these exchanges experience through ICT (information and communication technologies).
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2012_49
id	sigradi2012_49
authors	Martins, Mara
year	2012
title	Ausência visível: uma quase presença [Visible absence: an almost presence]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 29-33
summary	This article is about the creation of poetic languages __that use technological resources to explore new artistic possibilities. Themes related to digital technology, such as virtual reality and screen-presence, are discussed from the point of view of the art world and observed through the body-media and time-space relations. From this perspective, the article examines the work Visible absence, concluded by the author in 2011, based on the convergence of digital media.
keywords	art media; screen-presence; virtual reality
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2011_371
id	sigradi2011_371
authors	Neto de Faria, José; Omine Kátia; Sakai Raul
year	2011
title	Projeto Design Condensado: o uso da tecnologia HTML5 na implantação do sistema colaborativo dinâmico de visualização de dados sobre a história do design [Condensed Design Project: the use of HTML5 technology in the implementation of the dynamic collaborative system of visualization of data on the history of design]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 386-390
summary	The 'Condensed Design Project' presents the experience and the partial results of the use of HTML5 technology in the implementation of a 'Dynamic collaborative system of visualization of data' on the history of design. At the moment, the main purpose of the project is to understand how the HTML5 technology can be applied in the construction of intuitive, accessible, and interactive interfaces and tools, with the purpose of promoting the effective interpretation and understanding of the existing relations or possible relations between data and facts of the history of design by the juxtaposition, interconnection and simplicity in the handling of the system. The technology properties allowed to test and use the system in multiple platforms.
keywords	Design History; Collaborative System; Data Visualization; HTML5; Canvas API
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	acadia11_122
id	acadia11_122
authors	Pigram, David; McGee, Wes
year	2011
title	Formation Embedded Design: A methodology for the integration of fabrication constraints into architectural design
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 122-131
doi	https://doi.org/10.52842/conf.acadia.2011.122
summary	This paper presents a methodology for the integration of fabrication constraints within the architectural design process through custom written algorithms for fabrication. The method enables the translation from three-dimensional geometry, or algorithmically produced data, into appropriately formatted machine codes for direct CNC fabrication within a single CAD modeling environment. This process is traditionally one-way with part files translated via dedicated machine programming software (CAM). By integrating the toolpath creation into the design package, with an open framework, the translation from part to machine code can be automated, parametrically driven by the generative algorithms or explicitly modeled by the user. This integrated approach opens the possibility for direct and instantaneous feedback between fabrication constraints and design intent. The potentials of the method are shown by discussing the computational workflow and process integration of a diverse set of fabrication techniques in conjunction with a KUKA 7-Axis Industrial Robot. Two-dimensional knife-cutting, large-scale additive fabrication (foam deposition), robot-mounted hot-wire cutting, and robot-assisted rod-bending are each briefly described. The productive value of this research is that it opens the possibility of a much stronger network of feedback relations between formational design processes and material and fabrication concerns.
keywords	robotic fabrication; multi-axis; file-to-factory, open-source fabrication, parametric modeling, computational design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	caadria2011_033
id	caadria2011_033
authors	Salama, Tina A.
year	2011
title	Second-order prosthesis: Human-aided design within the expanded field of ecology
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 345-354
doi	https://doi.org/10.52842/conf.caadria.2011.345
summary	This paper defines second-order prosthesis in which the human subject, by virtue of her corporeality or imagination, is resourced by a technological system. Underpinning this definition is Massumi’s notion of asymmetrical, symbiotic prosthesis and the second- order cybernetic challenge to objectivity. Through the case study of an immersive, sensor-based, interactive artwork, it is found that there are resonances between technology engaged in second-order prosthesis and the ideology of biology. Notions of survival, reproduction and evolution become a critical part of second-order prosthetic discourse and an expanded field of ecology is identified as the territory of analysis for resulting techno-human relations. A second case study explores computer-aided design (CAD) and virtual space. This study confirms the status of the technological in an expanded ecology as both CAD and virtual space resource imagination in the production of human-aided design.
keywords	Second-order prosthesis; expanded ecology; prosthesis; computer-aided design; human-aided design
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2021_231
id	caadria2021_231
authors	Wong, Kwan Ki Calvin and van Ameijde, Jeroen
year	2021
title	In-Between Spaces: Data-driven Analysis and Generative Design for Public Housing Estate Layouts
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 397-406
doi	https://doi.org/10.52842/conf.caadria.2021.2.397
summary	As Hong Kong constructs increasingly high-density, high-rise public housing estates to increase land use efficiency, public in-between spaces are more constrained, which impacts the quality of social relations, movements and daily practices of residents (Shelton et al. 2011; Tang et al. 2019). Current planning practices are focused on the achievement of quantitative performance measures, rather than qualitative design considerations that support residents experiences and community interaction. This paper presents a new methodology that combines urban analysis and generative design for the regeneration of social housing estates, based on the spatial and social qualities of their in-between spaces.
keywords	Social Housing; Public Open Space; Generative Design; Urban Planning
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2011_017
id	ecaade2011_017
authors	Achten, Henri; Koszewski, Krzysztof; Martens, Bob
year	2011
title	What happened after the “Hype” on Virtual Design Studios?: Some Considerations for a Roundtable Discussion
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.23-32
doi	https://doi.org/10.52842/conf.ecaade.2011.023
wos	WOS:000335665500001
summary	The issue of collaborative design has been elaborated extensively within the framework of previous CAAD–conferences. Today, an appreciation for traditional attitudes and methods can be observed, but interestingly, a mixture of approaches is also noticeable (computational techniques used in low–tech fabrication environments, for example). This allows for a round–table survey of the current state–of–the–art focused on experiences related to distant learning in the architectural curriculum. To make VDS viable, not only are technological solutions necessary, but so are social (among people) and professional (ways of behavior) ones. In this round–table we aim to identify critical factors of success (or failure).
keywords	Education; architectural curriculum; blended learning; collaborative design; VDS
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_282
id	sigradi2011_282
authors	Alcantara Brod, Gustavo; Borda Almeida da Silva, Adriane; Freitas Pires, Janice
year	2011
title	Anamorfose na Praça: Um Encontro do Real e do Virtual [Anamorphosis in the square: the real meets the virtual]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 131-134
summary	This paper describes the process of creating anamorphic projection using digital tools in order to apply this technique to full color images that can then be printed and applied onto a surface. The experiment was done as an installation in the main square of the city of Pelotas - RS, intended to explore the perception of three-dimensional illusion produced by anamorphosis and verify the reaction of the general public while they experience the unusual view of the historic building in front of them.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: