Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 29

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2011_009
id	caadria2011_009
authors	Anderson, Jonathon and Ming Tang
year	2011
title	Form follows parameters: Parametric modeling for fabrication and manufacturing processes
doi	https://doi.org/10.52842/conf.caadria.2011.091
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 91-100
summary	As the architectural field continues to explore the possibilities of parametric design it is important to understand that architectural computation has evolved from representations to simulation and evaluation. This paper explores the digital processes of parametric scripting as a way to generate architectural artefacts that can be realized in the physical landscape through various digital fabrication and industrial manufacturing techniques. This paper will highlight the important discoveries of the geometries and the implications the script has on the construction processes. One benefit of using parametric modelling as a component to the manufacturing pipeline is being able to explore several design iterations in the digital realm before ever realizing them in the physical landscape. Furthermore, parametric modelling allows users to control the production documentation and precision needed to manufacture. As a result, the design pipeline presented in this paper seeks to eliminate the construction processes that hinder the physical act of making architecture.
keywords	Manufacturing process; parametric modelling; 3D printing, plastic casting; mould making
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia11_138
id	acadia11_138
authors	Buell, Samantha; Shaban, Ryan; Corte, Daniel; Beorkrem, Christopher
year	2011
title	Zero-waste, Flat Pack Truss Work: An Investigation of Responsive Structuralism
doi	https://doi.org/10.52842/conf.acadia.2011.138
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 138-143
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models.This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. A truss is defined as: “A triangulated arrangement of structural members that reduces nonaxial external forces to a set of axial forces in its members.” (Allen and Iano 2004)Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	cf2011_p075
id	cf2011_p075
authors	Janssen, Patrick; Chen Kian Wee
year	2011
title	Visual Dataflow Modelling: A Comparison of Three Systems
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 801-816.
summary	Visual programming languages enable users to create computer programs by manipulating graphical elements rather than by entering text. The difference between textual languages and visual languages is that most textual languages use a procedural programming model, while most visual languages use a dataflow programming model. When visual programming is applied to design, it results in a new modelling approach that we refer to 'visual dataflow modelling' (VDM). Recently, VDM has becoming increasingly popular within the design community, as it can accelerate the iterative design process, thereby allowing larger numbers of design possibilities to be explored. Furthermore, it is now also becoming an important tool in performance-based design approaches, since it may potentially enable the closing of the loop between design development and design evaluation. A number of CAD systems now provide VDM interfaces, allowing designers to define form generating procedures without having to resort to scripting or programming. However, these environments have certain weaknesses that limit their usability. This paper will analyse these weaknesses by comparing and contrasting three VDM environments: McNeel Grasshopper, Bentley Generative Components, and Sidefx Houdini. The paper will focus on five key areas: * Conditional logic allow rules to be applied to geometric entities that control how they behave. Such rules will typically be defined as if-then-else conditions, where an action will be executed if a particular condition is true. A more advanced version of this is the while loop, where the action within the loop will be repeatedly executed while a certain condition remains true. * Local coordinate systems allow geometric entities to be manipulated relative to some convenient local point of reference. These systems may be either two-dimensional or three-dimensional, using either Cartesian, cylindrical, or spherical systems. Techniques for mapping geometric entities from one coordinate system to another also need to be considered. * Duplication includes three types: simple duplication, endogenous duplication, and exogenous duplication. Simple duplication consists of copying some geometric entity a certain number of times, producing identical copies of the original. Endogenous duplication consist of copying some geometric entity by applying a set of transformations that are defined as part of the duplication process. Lastly, exogenous duplication consists of copying some geometric entity by applying a set of transformations that are defined by some other external geometry. * Part-whole relationships allow geometric entities to be grouped in various ways, based on the fundamental set-theoretic concept that entities can be members of sets, and sets can be members of other sets. Ways of aggregating data into both hierarchical and non-hierarchical structures, and ways of filtering data based on these structures need to be considered. * Spatial queries include relationships between geometric entities such as touching, crossing, overlapping, or containing. More advanced spatial queries include various distance based queries and various sorting queries (e.g. sorting all entities based on position) and filtering queries (e.g. finding all entities with a certain distance from a point). For each of these five areas, a simple benchmarking test case has been developed. For example, for conditional logic, the test case consists of a simple room with a single window with a condition: the window should always be in the longest north-facing wall. If the room is rotated or its dimensions changed, then the window must re-evaluate itself and possibly change position to a different wall. For each benchmarking test-case, visual programs are implemented in each of the three VDM environments. The visual programs are then compared and contrasted, focusing on two areas. First, the type of constructs used in each of these environments are compared and contrasted. Second, the cognitive complexity of the visual programming task in each of these environments are compared and contrasted.
keywords	visual, dataflow, programming, parametric, modelling
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2011_307
id	sigradi2011_307
authors	Lenz Costa Lima, Daniel; Ribeiro Cardoso, Daniel; Soares Lopes, André
year	2011
title	Vento de praia: desenho de vilarejos [Wind Shore – fishermen village’s design]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 538-541
summary	In this work, Type is suggested as a source of knowledge, once acknowledged that it is an efficient response to a specific problem, and that a knowledge based on observation of a greater quantity of occurrence of the phenomenon is more solid. The type is understood under the new Theory of Systems, that is, it carries within itself information on its environment. Thus, its understanding envolves that of the system. A study on the type Traditional Beach Villages of Ceará is then undertaken, using GIS software to retrieve information that are then translated and simulated on a Rhino/Grasshopper scripting.
keywords	Type; General System Theory (GST); Digital Image Processing; algorithm; fishermen's villages
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	acadia11_204
id	acadia11_204
authors	Wilkins, Gretchen; Zilka, Leanne; Cherrey, John
year	2011
title	Scripted Materials
doi	https://doi.org/10.52842/conf.acadia.2011.204
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 204-211
summary	Looking to fabrication technologies as a way to bridge the gap between design and execution, this research tested various methods for the digital optimization of flat sheet materials, specifically those which can be reclaimed from building and manufacturing sites. By reordering conventional design processes to begin with (reclaimed) material constraints we are looking to close the gap in the cycle of sheet material manufacturing and reduce the amount of building waste in architectural projects. This paper will discuss the process of embedding digital information and scripting processes into material systems in order to rethink the relationship between input and output in design, especially in the context of sheet material manufacturing, reclamation, fabrication and distribution. Two projects situated within architectural design studios are cited as examples to this approach, with speculation on how the work might shift the role of ‘craft’ in design and fabrication processes.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 07:57

_id	sigradi2011_198
id	sigradi2011_198
authors	Aroztegui Massera, Carmen
year	2011
title	La cámara en la animación de arquitectura. Reconsiderando “la mirada” y el régimen de mostración en el cine [The Camera in Architectural Animation. Reconsidering “The Gaze” and The Registration Regime in the Cinema]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 432-435
summary	Even though inspired by cinema, architecture animations often oversimplify filmic space, and conflate two distinct concepts: gaze, and vision. Such misinterpretation leads to overuse camera movement to present spaces as if the change of point of view would lead to communicate lived space. This article introduces such discussion in the context of the tableau vivant, a living picture, explores the use of the shot sequence and the use of non-narrative scenes.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	d90e
id	d90e
authors	Christenson, Mike
year	2011
title	On the architectural structure of photographic space
source	Architectural Science Review 54.2, 93-100.
summary	The ambiguous relationship between photography and architecture is one of constructed and re-constructed identity. As a specific exploration into this relationship, this paper considers the construct of point-of-vew/field-of-view maps (or POV/FOV maps), that is, diagrams which register photographers’ positions, fields of view, and directions of view corresponding to a set of photographs of an existing work of architecture. A POV/FOV map can be expected to differ according to whether the set of photographs under consideration is (a) sampled from a image-sharing site such as Flickr; (b) published in an academic monograph; or (c) published in the popular press. This paper tests the extent and significance of these differences through a comparative study of Mies van der Rohe’s Crown Hall and Rem Koolhaas’s McCormick Tribune Campus Center, both at the Illinois Institute of Technology in Chicago, USA. In both cases, POV/FOV maps are used to compare sets of professional or academic photographs to sets of touristic and popular-press ones. Reflecting the tenuous nature of architectural identity as constructed through photography, the comparison both confirms and denies assumptions concerning differences between professional and amateur approaches. The paper concludes with the speculation that tools like Google Street View are likely to further erode traditional distinctions between modes of identity-construction, in particular, those distinctions which a POV/MAP can register.
keywords	Photography, visualization, Mies, Koolhaas, flickr, Google
series	journal paper
type	normal paper
email
more	http://www.informaworld.com/smpp/content~content=a938203017~db=all~jumptype=rss
last changed	2011/07/04 18:12

_id	sigradi2011_301
id	sigradi2011_301
authors	Cáceres Corvalán, Katherine; Calvo Castillo, Francisco
year	2011
title	Pieles Responsivas: Desarrollo de Infraestructuras Adaptables a su Entorno [Responsive Skins: Development of environment adaptable infrastructures]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 139-142
summary	This paper describes the authors' experience in the development and implementation of five academic instances linked to the research of design protocols based on parametric modeling and manufacturing techniques. The theme developed focus on the responsive skins, understood as a new kind of infrastructure capable of adapting to different geometric and topological configurations influenced by the information supplied from the environment at a specific time.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2011_020
id	ecaade2011_020
authors	de la Barrera Poblete, Carlos Ignacio
year	2011
title	Evolutionary Strategy to Design Optimized Architecture
doi	https://doi.org/10.52842/conf.ecaade.2011.293
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.293-301
summary	The purpose of the present experiment consists in optimizing a building modifying its apertures (windows) and its geometry to reduce heating and air conditioning consumption. The optimization is performed using a Micro-Genetic Algorithm (Micro-GAs) programmed in C# embedded like a series of functions into GenerativeComponents (GC). EnergyPlus (E+) software is used to evaluate the HVAC consumption levels of the building. The aim of the optimization is to keep the temperature at 20ºC on the hottest and coldest day using the least possible energy (Jules). In conclusion, this article proposes a new technique based on parametric modelling, evaluation and evolutionary optimization to generate efficient buildings with HVAC consumptions.
wos	WOS:000335665500033
keywords	Optimization; Parametric design; Genetic Algorithms; Energy Consumption; Architecture
series	eCAADe
email
last changed	2022/05/01 23:21

_id	745e
id	745e
authors	Derix C, Kimpian J, Mason J and Karanouh A
year	2011
title	Feedback Architecture
source	In Terri Peters (ed), Experimental Green Strategies: Ecological Design Research: Architectural Design (AD), Wiley and Sons, Nov-Dec 2011
summary	Sustainable design and ecological building are the most significant global challenges for the design profession. To meet new building regulations and national targets for carbon emissions, all future buildings will be judged on their ‘green’ merits. For architects to maintain a competitive edge in a global market, innovation is now key; the design of new processes, technologies and materials that combat carbon emissions and improve the sustainable performance of buildings are paramount. Contemporary practices have responded by setting up multi- disciplinary internal research and development teams, with offices such as Foster + Partners, HOK and Aedas setting the bar for ground-breaking research and development. The aim of internal groups is often to adapt and create new technologies and materials and to borrow ways of working from other disciplines, to focus on innovation rather than incrementally increasing performance or efficiency. This title offers insights into how a wide range of established and emerging practices are rising to meet these challenges. In pursuit of integrated sustainability and low-energy building, material and formal innovation and new tools and technologies, it illustrates that the future of architecture is evolving in an exchange of ideas across disciplines. Incorporating the creation of new knowledge about ecological building within the profession, it also identifies the emergence of a collective will to seek out new routes that build in harmony with the environment.
keywords	sustainability, morphology, performance, design computation
series	journal paper
type	normal paper
email
more	http://eu.wiley.com/WileyCDA/WileyTitle/productCd-047068979X.html
last changed	2012/09/20 17:07

_id	sigradi2011_060
id	sigradi2011_060
authors	Fonseca, David; Navarro, Isidro; Puig, Janina
year	2011
title	Códigos QR aplicados a la visualización de elementos arquitectónicos [QR Codes applied to architectural visualization ]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 548-551
summary	In recent years it has popularized the use of two-dimensional codes associated with all types of information. Usually we can find them in advertisements, receipts and all kinds of tickets, but also they can have good use in teaching. The architecture is a field that has incorporated its use especially in aspects related to leisure and tourism. The research presented in this paper seeks the introduction of QR codes in an active way in architectural education, with the optimization of all type of information associated to each type of user and projects.
keywords	QR-Codes; architecture; education; visualization; user profile
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ascaad2023_091
id	ascaad2023_091
authors	Haddad, Naif
year	2023
title	From Digital Heritage Documentation to 3D Virtual Reconstruction and Recreation for Heritage Promotion and Reinterpretation: The Case of the iHeritage Project
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 7-23.
summary	In the last two decades, the digital age Information and Communication Technologies (ICT) development and concerns combined with rapid technology have permitted the dissemination of different digital applications (including digital documentation, virtual reality (VR), augmented reality (AR), mixed reality (MR), digital gaming, and holograms etc.) oriented toward past, present and future communication using digital three-dimensional audio-visual content. Today, we must acknowledge that 3D virtual 3D reconstruction and recreation has become an established way to build, understand, reinterpret, and promote Cultural Heritage (CH). The virtual 3D reconstruction world and multimedia industry are often considered potential marketing channels for World Heritage Sites (WHS) and heritage tourism. 3D digital/virtual reconstruction merges and embodies subjectivity in one process, playing an attractive role in heritage tourism destinations and creating image experiences, providing the first enjoyable interpretation and information for most audiences. Based on the EU-funded iHERITAGE project ICT Mediterranean platform for the UNESCO CH, this paper attempts to examine some insights into constructing the optimistic image of heritage promotion and tourism in the context of CH as it flows through both physical and virtual spaces to give a glimpse of the future of virtual reconstruction. It illustrates the development of the concepts and practice, challenges and opportunities, advantages and disadvantages, and the negative and the positive sides of the related issues of only 3D digital reconstructions, and some issues concerning the ethics based on the International Chartres and Conventions mainly in the field of scientific visualisation, such as the London Charter (2009) and Seville Principles (2011). Finally, as a practical dimension, it presents some representative examples of 3D digital/virtual reconstruction of characteristic monuments of the WHS of Nabataean Petra in Jordan for the first time.
series	ASCAAD
email
last changed	2024/02/13 14:40

_id	cf2011_p019
id	cf2011_p019
authors	Haeusler, Matthias Hank; Beilharz Kirsty
year	2011
title	Architecture = Computer‚ from Computational to Computing Environments
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 217-232.
summary	Drawing on architecture, urban digital media, engineering, IT and interaction design, the research presented in this paper outlines a possible shift from architecture designed through computation (any type of process, algorithm or measurement done in a computational matter) towards architecture capable of computing (developing, using and improving computer technology, computer hardware and software as a space-defining element). The research is driven by recent developments in four fields, as follows: (a) Architecture in its recent development has shifted from a planar box, as was the ideal in the modernist movement, towards complex and non-standard forms. (b) The design concepts of non-standard surfaces have been adopted into media facades and media architecture by liberating the pixel from its planar position on a screen [1]. (c) Advancements in pervasive computing applications are now able both to receive information from the environment in which they are used and to detect other devices that enter this environment [2]. (d) Developments in advanced autonomous systems such as Human Computer Interaction (HCI) or Human Robot Interaction (HRI), have produced intelligent systems capable of observing human cues and using these cues as the basis for intelligent decision-making [3]. Media fa_ßade developments work in the direction of the above-mentioned four fields, but often come with limitations in architectural integration; they need additional components to interact with their environment and their interactions are both often limited to visual interactions and require the user to act first. The researched system, Polymedia Pixel [4] discussed in this paper, can overcome these limitations and fulfil the need for a space-defining material capable of computing, thus enabling a shift from architecture designed by computation towards architecture capable of active computing. The Polymedia Pixel architecture merges digital technology with ubiquitous computing. This allows the built environment and its relation with digital technology to develop from (a) architecture being represented by computer to (b) computation being used to develop architecture and then further to where (c) architecture and the space-defining objects have computing attributes. Hence the study presented aims to consider and answer this key question: ‚ÄòWhen building components with computing capacity can define space and function as a computer at the same time, what are the constraints for the building components and what are the possible advantages for the built environment?‚Äô The conceptual framework, design and methods used in this research combine three fields: (a) hardware (architecture and design, electronic engineering) (b) software (content design and IT) and (c) interaction design (HCI and HRI). Architecture and urban design determinates the field of application. Media architecture and computer science provide the technological foundation, while the field of interaction design defines the methodology to link space and computing [5]. The conceptual starting point is to rethink the application of computers in architecture and, if architecture is capable of computing, what kind of methodology and structure would find an answer to the above core research question, and what are the implications of the question itself? The case study discusses opportunities for applying the Polymedia Pixel as an architectural component by testing it on: (a) constraint testing ‚Äì applying computational design methodologies to design space (b) singular testing - discussing the advantages for an individual building, and (c) plural testing ‚Äì investigating the potential for an urban context. The research aims to contribute to the field of knowledge through presenting first steps of a System < - > System mode where buildings can possibly watch and monitor each other, additional to the four primary interactive modes of operation. This investigation, its proposed hypothesis, methodology, implications, significance and evaluation are presented in the paper.
keywords	media architecture, computational environments, ubiquitous computing, interaction design, computer science
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_124
id	ecaade2011_124
authors	Ibrahim, Mohamed S.; Bridges, Alan; Chase, Scott C.; Bayoumi, Samir; Taha, Dina S.
year	2011
title	Experiencing design with grammatical explorations in the beginning design studio: The after-recognition experiment: designing with constraints
doi	https://doi.org/10.52842/conf.ecaade.2011.689
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.689-698
summary	This paper describes a teaching experience conducted and carried out as part of the coursework of first year students of architecture in two different countries. The workshop is the second of three workshops planned to take place during the course of the first year studio, aimed at introducing new ways of thinking and introducing students to a new pattern of architectural education. The experiment was planned under the theme of “Production” in the mid-stage that is considered the operational stage of the design process. It also succeeded a recognition stage in which the students’ visual reasoning skills were targeted with more open and less determined design tasks. A grammatical approach was chosen to deliver the methodology in the design studio, based on the shape grammar methodology.
wos	WOS:000335665500080
keywords	Beginning/Novice students; shape grammar; pedagogical grammar; design education
series	eCAADe
email
last changed	2022/05/01 23:21

_id	c04a
id	c04a
authors	Krause D, Derix C and Gamlesaeter A
year	2011
title	The Virtual Building Simulator: a Post-Parametric Spatial Planning Environment
source	Proceedings of Construction Applications of Virtual Reality, Weimar, 2011
summary	The described research of Fraunhofer IAO and AEDAS CDR examines the potential of post-parametric computational design together with immersive methods like Virtual Reality. The industrial approach of frontloading identifies the early design stage as crucial for all subsequent processes and the overall sustainability of future building projects. There VR together with innovative planning simulation methods allow to manage building models as complex systems for long-term planning reliability from construction to building operation. The Virtual Building Simulator represents a prototype of a design platform where the designer-user can immersive himself via VR into the interactive spatial formation process. The process synthesizes parametric constraints with design intent and algorithmic behavioural logics.
keywords	Knowledge-based Processes, Algorithmic Design, Spatial Planning, VRfx
series	other
type	normal paper
email
more	http://aedasresearch.com/files/publications/CONVR_2011_Paper_Virtual_Building_Simulator_finish.pdf
last changed	2012/09/20 17:19

_id	ecaade2011_086
id	ecaade2011_086
authors	Lassance, Guilherme; Libert, Cédric; Lassance, Patricia Figueira; Feghali, Maria Elisa
year	2011
title	The sensitive tower: Architectural and urban design education faced with fragile metropolitan ecologies
doi	https://doi.org/10.52842/conf.ecaade.2011.581
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.581-588
summary	Neighborhoods that are still outside the market target can find alternative ways of re-development. Therefore, it is necessary to design architectures compatible with their fragile ecologies. This research benefits from a previous study where we tried to observe the evolution of the uses of buildings and ways of living faced with changes in environmental conditions in a given urban context. Increased automobile traffic has led to changes in the use of residential spaces whose function was gradually replaced by commercial activities. Making use of graphic-oriented interpretation of urban ambiance and landscape analysis methodology applied to the design of different floor levels, this paper aims to introduce the concept of sensitive tower defined on the basis of observations made in our post-occupancy survey as a teaching strategy for the design studio faced with the current challenges of the contemporary metropolis.
wos	WOS:000335665500067
keywords	Design process; design education; contemporary metropolis; urban environment
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_051
id	ecaade2011_051
authors	Marcos, Carlos L.
year	2011
title	New materiality: ideation, representation and digital fabrication
doi	https://doi.org/10.52842/conf.ecaade.2011.351
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.351-360
summary	Digital fabrication has become the true counterpoint to computer aided design in architecture. Thanks to new C.A.D./C.A.M. technologies architectural design can now manufacture complex buildings that only a decade ago could have been almost impossible to develop. This convergence between C.A.D./C.A.M. technologies is producing a trend from construction to manufacturing. Arbitrariness of architectural form should not be confused with arbitrariness of architectural design, the latter being contradictory with the very essence of design. Conventional or digital architecture must achieve design consistency and must rely on architecture’s basic principle, that of necessity. New materiality is a term being coined in relation to digital fabrication and the way it should address materiality in architecture. Innovation in the use of conventional materials, the ways in which they may be manufactured or tiled, as well as the emergence of new materials may outline what new materiality is about.
wos	WOS:000335665500040
keywords	Digital fabrication; new materiality; ideation; representation; open form
series	eCAADe
email
last changed	2022/05/01 23:21

For more results click below: