Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 546

Reformat results as: short short into frame detailed detailed into frame

_id	acadiaregional2011_019
id	acadiaregional2011_019
authors	Peters, Troy
year	2011
title	Simulation by Design: A Parametric Design Tool for Zero Energy Buildings
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.q2q
summary	To address the shortcomings of integrating building simulation in architectural design and to make it more appealing to students, a simple interface to Energyplus was created. This interface models a simple rectangular building that is passively heated by direct gain and cooled by ventilation. A simple photovoltaic interface has also been added to supply fan energy. This tool has an OpenGL modeler for visualization and uses Energyplus for calculations. The interface will run a full year simulation and graph the results. The results are reported in a yearly graph that shows the outdoor and indoor temperature. The indoor temperature range is based on adaptive comfort level. The interface was tested and used in an introductory design studio in order to comply with the 2010 imperative. The students simulated a simple box and changed the buildings parameters until the building fell within the adaptive comfort zone for most of the year. The climate simulated was Chicago, IL. Using these parameters the students then designed the building. The resulting designs show that even though the students were restricted in parameters, such as window percentage, they were still able to creatively design unique buildings that use zero to negative net energy for heating and cooling in a climate such as Chicago.
series	ACADIA
last changed	2022/06/07 07:49

_id	ijac20119402
id	ijac20119402
authors	Toth, Bianca; Flora Salim, Jane Burry, John Frazer, Robin Drogemuller and Mark Burry
year	2011
title	Energy-Oriented Design Tools for Collaboration in the Cloud
source	International Journal of Architectural Computing vol. 9 - no. 4, 339-359
summary	Emerging from the challenge to reduce energy consumption in buildings is the need for energy simulation to be used more effectively to support integrated decision making in early design.As a critical response to a Green Star case study, we present DEEPA, a parametric modeling framework that enables architects and engineers to work at the same semantic level to generate shared models for energy simulation.A cloud-based toolkit provides web and data services for parametric design software that automate the process of simulating and tracking design alternatives, by linking building geometry more directly to analysis inputs. Data, semantics, models and simulation results can be shared on the fly.This allows the complex relationships between architecture, building services and energy consumption to be explored in an integrated manner, and decisions to be made collaboratively.
series	journal
last changed	2019/07/30 10:55

_id	acadia10_327
id	acadia10_327
authors	Vassigh, Shahin; Herrera, Silvana
year	2010
title	Interactive Teaching through Simulation Environments
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 327-332
doi	https://doi.org/10.52842/conf.acadia.2010.327
summary	Spurring new and innovative building design will be critical to the urban energy and economic future of the nation. The operation of completed buildings account for 48% of the nation’s annual greenhouse gas emissions, and 76% of all electricity generated by U.S. power plants goes to supply the building sector. Therefore developing and applying new and innovative sustainable building design will have a measurable impact on the environment. Recent studies show sustainable building design is closely linked to system integration, where various components of a building work in confluence to produce synergetic benefits. As a result, a critical component of sustainable design involves a clear understanding of building systems operation, interaction, and the selection parameters. A consideration of suitable building systems, gauging their interaction, and proposing well integrated systems can lead to producing efficient models of sustainable buildings with minimal impact on the environment. The following paper outlines the progress on a project entitled “Building Literacy: the Integration of Building Technology and Design in Architectural Education.” The project develops a digital tool for teaching/learning architectural technology from an integrated systems perspective. The project attempts to immerse students in a simulated environment that is based on the real life practice of architecture. The project accomplishes this by harnessing the capabilities of simulation and dynamic modeling programs, as well as the state of art graphic media, to create compelling and rewarding reasons for students’ engagement in the lear ning process. The project involves a multidisciplinary team of faculty from Florida International University, University at Buffalo the State University of New York, and Iowa State University and is funded by the US Department of Education for the period of 2007-2011.
keywords	educational software, interactive learning, interactive teaching, simulation programs, building performance, building integrated systems,
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	cf2011_p020
id	cf2011_p020
authors	Kabre, Chitrarekha
year	2011
title	A Computer Aided Design Model for Climate Responsive Dwelling Roof
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 315-332.
summary	Computer-Aided Design models have generated new possibilities in the sustainable design of buildings. Computer models assisting different aspects of architectural design have been developed and used for several decades. A review of contributions of computing to architectural design is given by Gero. Most of the conventional simulation computer programs do not actively support design development and optimization, specially at the formative design stages. It is well established that most decisions that affect comfort and building energy use occur during the formative design stages of the project. Furthermore, the efforts required to implement those decisions at the beginning of the design process are small compared to the effort that would be necessary later on in the design process. Therefore, if sustainable design issues are going to receive an appropriate level of consideration at the beginning of the design process, they must be presented in a way which is useful to the architect and fits with other things the architect is considering at that time. Design is seen as a problem-solving process of searching through a space of design solutions. The process of finding a solution to a design problem involves, identifying one or more objectives, making design decisions based on the objectives, predicting and evaluating the performance to find the acceptable decisions. Each of these activities can be performed inside or outside the formal model. In designing a roof, an architect or building designer has to make many decisions on the materials. The arrangement of these materials determines the aesthetic appearance of the roof and the house. Other considerations that affect the choice of roofing materials are thermal performance, rain, fire protection, cost, availability and maintenance. Recyclability of materials, hazardous materials, life-cycle expectancy, solutions, and design options as they relate to the environment also need to be considered. Consequently, the design of roof has become quite a complex and multifaceted problem. The principal need is for a direct design aid which can generate feasible solutions and tradeoff performance in conflicting requirements and prescribe the optimum solution. This paper presents a conceptual Computer Aided Design model for dwelling roof. It is based on generation and optimization paradigms of Computer Aided Design; which is diametrically opposite to conventional simulation. The design of roof (design goal) can be defined in terms of design objective as "control radiant and conduction heat." This objective must be satisfied to achieve the design goal. The performance variables, such as roof ceiling surface temperature or new thermal performance index (TPI*) must acquire values within certain ranges which will satisfy the objective. Given the required inputs, this computer model automatically generates prescriptive quantitative information to design roof to achieve optimum thermal comfort in warm humid tropics. The model first generates feasible solutions based on the decision rules; next it evaluates the thermal performance of the roof taking into account design variables related to the building‚Äôs roof and finally it applies numerical optimization techniques to automatically determine the optimum design variables, which achieve the best thermal performance. The rational and methodology used to develop the proposed model is outlined and the implementation of model is described with examples for climatic and technological contexts of India and Australia.
keywords	Computer aided design, sustainable design, generation, optimization, dwelling roof, thermal performance
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_284
id	acadia11_284
authors	Ogrydziak; Luke
year	2011
title	Tetrahedron Cloud
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 284-291
doi	https://doi.org/10.52842/conf.acadia.2011.284
summary	The research project, tetrahedron cloud, explores agent-based stochastic behavior as a design tool. It investigates the possibilities for producing volumetric tetrahedral meshes based on the interactions of individual stochastic agents. The research situates itself at the intersection of the visual arts, the physical sciences, and computer science. The basic interest in stochastics comes from the visual arts; the growth simulation approach is borrowed from the natural sciences; and the use of a tetrahedral mesh within C++ comes from computer science. But more generally, the project focuses on architecture’s ongoing engagement with stochastic systems. By embedding extremely specific tendencies within an agent’s behavior, while also allowing for stochastic variation, we can create larger systems that are both in and out of our “control”. This sidesteps the typical limitations of many computational geometry and parametric methods, where there is often an overly deterministic relationship between the input and output of a given system. Such a shift from optimization to behavior inevitably brings up troubling questions of style. Abandoning the search for a “best” solution, or even the articulation of the criteria for such a task, re-opens computational architecture at its deepest levels as a site for design speculation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_080
id	ecaade2011_080
authors	Velasco, Rodrigo; Robles, Daniel
year	2011
title	Eco-envolventes: A parametric design approach to generate and evaluate façade configurations for hot and humid climates
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.539-548
doi	https://doi.org/10.52842/conf.ecaade.2011.539
wos	WOS:000335665500062
summary	This paper presents the current development of an in-progress academic research project where a particular design problem, that of building envelopes for tropical climates, is parametrically defined and its possible solutions assessed by means of data correlations and virtual simulations. In doing do so, the authors have devised a parametric structure based on factorial definitions whereby environmental, structural and life cycle analyses are taken into consideration to determine the design possibilities subsequently defined in terms of their physical configuration, constituent materials, construction processes and dynamic behaviour. Particular emphasis is placed on the embedded energy and functional performance of the resulting designs. The proposed methodological model is graphically presented, and its practical potential illustrated by a particular case of application. It should be taken into account, however, that this is a work in progress, and only the first step towards theconstruction of a simulation based methodology for architects and designers.
keywords	Parametric design; building envelopes; green envelopes; tropical architecture
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2011_072
id	caadria2011_072
authors	Gallas, Mohamed-Anis; Didier Bur and Gilles Halin
year	2011
title	Daylight and energy in the early phase of architectural design process: A design assistance method using designer’s intents
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 761-770
doi	https://doi.org/10.52842/conf.caadria.2011.761
summary	The integration of daylighting from the beginning of the design process can help designers to create buildings that respect their environment benefit from the solar gain thus giving an answer to illumination and energy needs (Bodart et al, 2002). This paper proposes a declarative assistance method/tool designed for the early design phase. This method assists the designer in integrating the daylight and its energetic impact from the beginning of the architectural design process by means of intents. The intents are related to the daylight, energy and spatial configuration aspects of the architectural project. The method translates the designer’s intents into potential solutions. They are the first formal representation of the architect’s intents that could be customized and altered during the next architectural design phases.
keywords	Daylight; energy; early design phase; design support; intents
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2011_068
id	ecaade2011_068
authors	Ma, Jin Yul; Choo, Seung Yeon; Seo, Ji Hyo; Jeong, Seung Woo
year	2011
title	A Study on BIM based Energy Efficient Design Improvement for Rural Standard Drawing and Specification in South Korea: Focusing on Using Buffer-Zone
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.430-438
doi	https://doi.org/10.52842/conf.ecaade.2011.430
wos	WOS:000335665500049
summary	Throughout the world, global warming has been considered a severe problem, which has led to efforts being made for technical development to reduce greenhouse gases in the building sector. As more attention has been paid to energy consumption by residential housing in the building sector, policies and studies on domestic dwellings tend to focus on quality improvement and energy-efficient housing development rather than quantitative housing supply. Yet, policies and guidelines considering residential energy efficiency are inclined to focus on performance and lack in integrated consideration in connection with design. Hence, it seems necessary to compare and analyze design and energy efficiency and to study correlations between housing design and energy. Lately, BIM technology has been used in buildings domestically and proved reliable in respect of its features that enable overall comparison and prediction of housing design, performance and efficiency. The present study is to use the BIM technology to analyze energy consumption and the standard drawing schemes for rural areas to find ways to improve efficient design in singles housing sector and to suggest how to take advantage of buffer zones and how to improve housing design in favor of energy efficiency.
keywords	BIM; Energy Analysis Tool; Rural Standard Drawing; Buffer-Zone; Sustainable design
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_152
id	acadia11_152
authors	Rael, Ronald; San Fratello, Virginia
year	2011
title	Developing Concrete Polymer Building Components for 3D Printing
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 152-157
doi	https://doi.org/10.52842/conf.acadia.2011.152
summary	The creation of building components that can be seen as sustainable, inexpensive, stronger, recyclable, customizable and perhaps even reparable to the environment is an urgent, and critical focus of architectural research. In the U.S. alone, the construction industry produced 143.5 million tons of building-related construction and demolition debris in 2008, and buildings, in their consumption of energy produce more greenhouse gasses than automobiles or industry.Because the inherent nature of 3D printing opens new possibilities for shaping materials, the process will reshape the way we think about architectural building components. Digital materiality, a term coined by Italian and Swiss architects Fabio Gramazio and Matthias Kohler, describes materiality increasingly enriched with digital characteristics where data, material, programming and construction are interwoven (Gramazio and Kohler, 2008). The research aspires towards this classification through the use of parametric modeling tools, analytic software and quantitative and qualitative analysis. Rapid prototyping, which is the automatic construction of physical objects using additive manufacturing technology, typically employs materials intended for the immediate analysis of form, scale, and tactility. Rarely do the materials used in this process have any long-term value, nor does the process - except in rare cases with expensive metal prototyping - have the ability to create actual and sustainable working products. This research intends to alter this state of affairs by developing methods for 3D printing using concrete for the production of long-lasting performance-based components.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 08:00

_id	cf2011_p060
id	cf2011_p060
authors	Sheward, Hugo; Eastman Charles
year	2011
title	Preliminary Concept Design (PCD) Tools for Laboratory Buildings, Automated Design Optimization and Assessment Embedded in Building Information Modeling (BIM) Tools.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 451-476.
summary	The design of laboratory buildings entails the implementation of a variety of design constraints such as building codes; design guidelines and technical requirements. The application of these requires from designers the derivation of data not explicitly available at early stages of design, at the same time there is no precise methodology to control the consistency, and accuracy of their application. Many of these constraints deal with providing secure environmental conditions for the activities inside laboratories and their repercussions both for the building occupants and population in general, these constraints mandate a strict control over the building‚Äôs Mechanical Equipment (MEP), in particular the Heating Ventilating and Air Conditioning (HVAC) system. Due to the importance of these laboratory designers are expected to assess their designs not only according spatial relationships, but also design variables such as HVAC efficiency, air pressure hierarchies, operational costs, and the possible implications of their design decisions in the biological safety of the facility. At this point in time, there are no practical methods for making these assessments, without having constant interaction with HVAC specialists. The assessment of laboratory design variables, particularly those technical in nature, such as dimensioning of ducts or energy consumption are usually performed at late stages of design. They are performed by domain experts using data manually extracted from design information, with the addition of domain specific knowledge, the evaluation is done mostly through manual calculations or building simulations. In traditional practices most expert evaluations are performed once the architectural design have been completed, the turn around of the evaluation might take hours or days depending on the methods used by the engineer, therefore reducing the possibility for design alternatives evaluation. The results of these evaluations will give clues about sizing of the HVAC equipment, and might generate the need for design reformulations, causing higher development costs and time delays. Several efforts in the development of computational tools for automated design evaluation such as wheel chair accessibility (Han, Law, Latombe, Kunz, 2002) security and circulation (Eastman, 2009), and construction codes (ww.Corenet.gov.sg) have demonstrated the capabilities of rule or parameter based building assessment; several computer applications capable of supporting HVAC engineers in system designing for late concept or design development exist, but little has been done to assess the capabilities of computer applications to support laboratory design during architectural Preliminary Concept Design(PCD) (Trcka, Hensen, 2010). Developments in CAD technologies such as Building Information Modeling (BIM) have opened doors to formal explorations in generative design using rule based or parametric modeling [7]. BIM represents buildings as a collection of objects with their own geometry, attributes, and relations. BIM also allows for the definition of objects parametrically including their relation to other model objects. BIM has enabled the development of automated rule based building evaluation (Eastman, 2009). Most of contemporary BIM applications contemplate in their default user interfaces access to design constraints and object attribute manipulations. Some even allow for the application of rules over these. Such capabilities make BIM viable platforms for automation of design data derivation and for the implementation of generative based design assessment. In this paper we analyze the possibilities provided by contemporary BIM for implementing generative based design assessment in laboratory buildings. In this schema, domain specific knowledge is embedded in to the BIM system as to make explicit design metrics that can help designers and engineers to assess the performance of design alternatives. The implementation of generative design assessments during PCD can help designers and engineers to identify design issues early in the process, reducing the number of revisions and reconfigurations in later stages of design. And generally improving design performance.
keywords	Heating ventilating and Air Conditioning (HVAC), Building Information Models (BIM), Generative Design Assessment
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadiaregional2011_008
id	acadiaregional2011_008
authors	Krietemeyer,Elizabeth A.; Anna H. Dyson
year	2011
title	Electropolymeric Technology for Dynamic Building Envelopes
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.s0s
summary	Human health and energy problems associated with the lack of control of natural light in contemporary buildings have necessitated research into dynamic windows for energy efficient buildings. Existing dynamic glazing technologies have made limited progress towards greater energy performance for curtain wall systems because they are still unable to respond to dynamic solar conditions, fluctuating building demands, and a range of user preferences for visual comfort and individual control. Recent breakthroughs in the field of information display provide opportunities to transfer electropolymeric technology to building envelopes that can achieve geometric and spectral selectivity in concert with pattern variation within the façade. Integrating electroactive polymers within the surfaces of an insulated glazing unit (IGU) could dramatically improve the energy performance of windows while enabling user empowerment through the control of the visual quality of this micro-material assembly, in addition to allowing for the switchable patterning of information display. Using parametric modeling as a generative design and analysis tool, this paper examines the technical intricacies linking system variables with visual comfort, daylight quality, and pattern design of the proposed electropolymeric dynamic facade technology.
series	ACADIA
last changed	2022/06/07 07:49

_id	ijac20109301
id	ijac20109301
authors	Biloria, Nimish
year	2011
title	InfoMatters, a multi-agent systems approach for generating performative architectural formations
source	International Journal of Architectural Computing vol. 9 - no. 3, 205-222
summary	The research paper exemplifies upon a computationally intensive inter-disciplinary research driven design investigation into spatializing the relationship between digital information and physical matter. Focusing on the development of architectural scale urban inserts, the design-research work operates on the intersection of information technology, environmental design, architecture, and computer aided manufacturing domains.The research framework revolves around developing a seamless integration of the aforementioned disciplines in order to establish iterative simulation driven methodologies for generating bottom-up sustainable architectural formations. This is achieved by establishing parametrically driven relational linkages between differential data sets (environmental, social, topological, material etc), which formulate the context (both global and local) within which the proposed project has to be designed. A selforganizing multi-agent system based simulation methodology for generating resultant spatial formations, in time, based on the impacts of the parametric relationships between the aforementioned data sets is eventually embarked upon. This implies, understanding the site as a dynamic information field within which interdependent ecology of agents (representing typology of people, program, structure, speed, desired social interaction etc) with multi-level relational affinities amongst each other as well as the dynamic urban information field. The resultant self-organized multi-agent formations are iteratively mined for identifying logical three-dimensional structural patterns or subjected to programmatic and environmental need driven additional layer of structural simulation with pre-embedded material restraints. An optimized system of multi-performative components that not only populates but also serves as an integrated structural + skin system of the results obtained from the agent based simulations (based upon the degree of inclusion/exclusion of parameters such as the amount of light, sound, wind etc) is subsequently generated. These experimental projects attained the status of self-evolving ecologies of multi-dimensional agents with embodied behavioural profiles, thus providing engaged, highly interdependent design by simulation outputs. The outputs showcase a dynamic system's driven approach towards sustainable design by stressing upon the idea of cohesively binding information and material systems from the very beginning of the design process. Such approaches help in reducing post-optimization of built form and consequently allow for rational understanding of performance criteria and its impact on formal articulations throughout the design process.
series	journal
last changed	2019/05/24 09:55

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia11_170
id	acadia11_170
authors	El Sheikh, Mohamed; Gerber, David
year	2011
title	Building Skin Intelligence: A parametric and algorithmic tool for daylighting performance design integration
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 170-177
doi	https://doi.org/10.52842/conf.acadia.2011.170
summary	The research presents a methodology and tool development which delineates a performance-based design integration to address the design, simulation, and proving of an intelligent building skin design and its impact on daylighting performance. Through the design of an algorithm and parametric process for integrating daylighting performance into the design phase an automated configuration evaluation is achieved. Specifically the tool enables design exploration of semi autonomous and fully autonomous configurations of an exterior building envelope louver system. The research situates itself in the field of intelligent building skins and adds to the existing solutions a validation of systems with interdependent louvers of varying tilt angles. The system is designed to respond to dynamic daylighting conditions and occupants’ preferences. Within the framework of this study, Grasshopper, Rhino, Galapagos and DIVA, are linked and coded into one integrated process, facilitating design optioneering with near real time feedback. The paper concludes with a description of the tool set’s extensibility, future incorporation of domain integration, and conflation of natural and physical system interaction and complexity.
keywords	kinetic facades; parametric design; design integration; daylighting; performative design; design optioneering; realtime feedback
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2011_036
id	ecaade2011_036
authors	Gmelin, Sebastian; Agger, Kristian; Lassen, Michael Henry
year	2011
title	Simulation Design Tools: Using Parametric Building Information Modeling and Physical Simulation for Form Finding of Double Curved Surfaces
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.215-224
doi	https://doi.org/10.52842/conf.ecaade.2011.215
wos	WOS:000335665500024
summary	Parametric modeling is a powerful tool to create variations of a design following specified criteria. Physical modeling provides flexible relationships between design elements and can simulate the behavior of hanging chain models. Building Information Modeling can contain geometry and design properties and relations. In this paper it is proposed to join all three to create a Simulation Design Tool that allows the intuitive creation of double curved surfaces which follow the rules of funicular systems. This tool is implemented in B-Processor, open-source Building Information Modeling software to bridge the break that occurs when moving from a design software package to Building Information Modeling. It is shown how the tool balances intuitive sculpting and accurate simulation and how the user can interact to mediate different design requirements.
keywords	Form Finding; Parametric Building Information Modeling; B-Processor; Particle Spring System; Grid Shell
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadiaregional2011_020
id	acadiaregional2011_020
authors	Hudson, Roly; Drew MacDonald, Mark Humphreys
year	2011
title	Race track modeler. Developing an Iterative Design Workflow Combining a Game Engine and Parametric Design
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.v2b
summary	This paper documents the continuing development and testing of a novel digital work flow established and implemented for the design and redevelopment of formula one racing tracks. The Race Track Modeler (RTM) tool uses a game engine to simulate driving around proposed track designs. Performance data from the simulation is combined with real data acquired from analysis of vehicle mounted accident data recorders (ADRs). The output of the tool is a graphical representation of simulated stopping positions of vehicles that have lost control and left the track. This information directly informs the design of motor racing facilities; the zoning of spectator facilities, position and specification of crash barriers (if required), and surface material selection for the run-off zones (the area where vehicles are expected to stop after losing control and leaving the track). The RTM can suggest further design changes to the track geometry which are then fed back into the game engine. The project involves methods of binding analysis of design directly to geometry together with input from interactive controls. The RTM has been developed and tested during the redevelopment of Silverstone race track in the United Kingdom (figure 1) this paper documents the current state of the tool and concludes with proposed future developments.
series	ACADIA
last changed	2022/06/07 07:49

_id	eaea2009_kardos_plachtinska
id	eaea2009_kardos_plachtinska
authors	Kardos, Peter; Petra Plachtinska
year	2011
title	Spatial Experience in Real & Virtual Environment as an Urban Design Tool
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 59-64
summary	The innovations of information technologies and the new possibilities of multimedia exploitation in the realm of architectural design and education are supporting the development of image communication methods on the basis of interactivity. The creative process of searching and decision-making in the urban design studio of our Faculty is supported by spatial modeling methods. The draft is sketched in modeling material on a working model. From the didactic point of view, relevant are mainly those phases, in which is possible, in the imaginative way, to support the searching and decision making process with the aim to test, compare and continuously evaluate the fulfillment of the hypothetic intentions of the solution responsibilities. The model becomes an interactive medium of cooperation between teacher and the working group of students. From the view of design crystallization, the dominant phases, in the creative process, are examining, verification, and simulation. The alternatives of material-compositional content and the spatial performance charts of modeled physical structure are verifying and the visual experience of the anticipated urban environment is simulated by the author, but also through the future client’s eyes. The alternation of the composition’s spatial configurations is generally appreciated by the static visual verification in the endoscopic horizon like the architectural spatial studies. The effective method of the progress generates a creative atmosphere for the generative thinking and design. The laboratory simulation of spatial experiences and their evaluation is performed following the perception psychology relations. The simulation of digestion of the new spatial reality intervenes the customer’s identification and guides to subjective approaches towards the quality and complexity of the formed environment. The simulation is performed in motion in order to be able to anticipate the dynamic continuity of subjective spatial imagination. The induced atmosphere will direct the evaluational attitudes of authors on comparison and selection of the successful alternatives. In our fee, we will present the demonstrations of selected static and dynamic notations of image sequences prepared in our laboratory. The presentations have been created in order to analyze, verify and offer imaginative support to creative findings in result of fulfilling the studio design tasks in the educational process. The main one is the design of urban spatial structures. The laboratory methodology is in the first place oriented on the analogue-digital procedures of "endoscope" model simulation. At the same time it also explores and looks for new unconventional forms of visual communication or archiving as imagination support to specialist and laymen participants in creative, valorization and approval processes.
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	ecaade2011_172
id	ecaade2011_172
authors	Okuda, Shinya; Ping, Chua Liang
year	2011
title	Form Follows Performance: Structural Optimisation and the Cost-effectiveness of Digital Fabrication
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.837-842
doi	https://doi.org/10.52842/conf.ecaade.2011.837
wos	WOS:000335665500096
summary	The presented paper describes a series of studio-based research projects on structural optimisation and the cost-effectiveness of digital fabrication that aim to balance stress distribution across thick walls or a rib density of slabs. As a consequence of the structural optimisations, the results tend to be non-uniform shapes that are not ideal for cost-effective fabrication. This paper introduces a few simple models to balance structural optimisation and fabrication cost-effectiveness. It involves relatively simple structural simulations as the design inputs, and then converts the simulation results into various architectural forms using parametric 3D modelling tool (McNeel Rhinoceros v4, Grasshopper v0.8) before fabricating them using digital fabrication technologies. The major challenge of this study is how to translate simulation results into architectural components/overall building shapes and how to fabricate complex forms in a cost-effective manner.
keywords	Digital Fabrication; Mass Customisation; Cost-effectiveness; Structural Optimization; Parametric
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2013_195
id	caadria2013_195
authors	Park, Jihyun; Azizan Aziz, Kevin Li and Carl Covington
year	2013
title	Energy Performance Modeling of an Office Building and Its Evaluation – Post-Occupancy Evaluation and Energy Efficiency of the Building
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 209-218
doi	https://doi.org/10.52842/conf.caadria.2013.209
wos	WOS:000351496100021
summary	Energy performance modelling can provide insights into the efficiency and sustainability of commercial buildings, and also the achievement of certification standards such as USGBC LEED. However, the results from the modelling must be validated via a post-construction evaluation, which quantifies any discrepancies between the predicted energy usage and the actual energy consumed. In this study, an existing office building was examined to test how well the model predicts energy usage. The results from the model were compared with the actual usage of gas and electricity over two years (2010-2011). Our study showed a 123% higher gas usage,and a 36% lower electricity, compared with the simulation. This difference presents that occupant behaviour and building construction practices have significant impact on the energy usage of a building. For instance, the large discrepancy among gas usage is due to the office building’s thermal envelope, which identifies the spots at which heat leaks out of the building, thereby forcing the heating unit to work more. Additionally, the post occupancy evaluation study identified that indoor environmental conditions impact on energy consumption of the building.
keywords	Building performance evaluation, Energy modelling, Energy usage, User behaviour, Post occupancy evaluation
series	CAADRIA
email
last changed	2022/06/07 08:00

For more results click below: