Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 52

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2011_308
id	sigradi2011_308
authors	de Lima, Denise; Teixeira Gonçalves, Fábio; da Silva, Régio Pierre
year	2011
title	Portais Corporativos em Universidades: Uma Metodologia para o Processo de Projeto [Corporative Portal in Universities: a Methodology for Design Process]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 376-380
summary	The web portals in universities must be functional, meeting the demands of the academic community. This study aims to propose a systematic methodology for the design process of corporate portals. For this, an exploratory survey was made about corporate portals, methodologies for product design, software engineering and theory of object orientation. Case studies were made with two universities teams. Thus, the end of this study was designed a methodology for the design of corporate portals in universities. And soon after, there was the application of this methodology in project development of the portal of university of Brazil.
keywords	Product development; design; methodology
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2011_127
id	ecaade2011_127
authors	Di Mascio, Danilo; Palka, Pierpaolo
year	2011
title	From the 3D survey “ad Oggetto” to the technological representation of the architecture: The case study of Caporciano
doi	https://doi.org/10.52842/conf.ecaade.2011.829
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.829-836
summary	In this paper we are to present a research, still in progress, whose main objective is the desire to develop and test an alternative method of surveying, representing and analyzing buildings that are part of a minor historical-artistic heritage. The instruments used and the proposed methodology want to give an alternative to other solutions such as 3D laser scanners and photogrammetry, which would be not only expensive, but also difficult to use in small and irregular spaces, typical of the old Italian villages. The case study that will be presented is Caporciano, a small medieval village in Abruzzo (a region at the centre of Italy), in the internal area of the region affected by a violent earth quake in 2009. This tragic event has put the spotlights on the problems and the fragility of these small villages, which represent an important local resource of cultural importance, and therefore must be preserved for the future generation. In order to properly act in these areas, it is necessary to thoroughly know the actions to be taken for its recovery or conservation, and the present methodology allows the creation of this knowledge made up of several drawings, both two-dimensional and three-dimensional.
wos	WOS:000335665500095
keywords	3D survey; cultural heritage; 3d modeling; CAD; Abruzzo region
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_086
id	ecaade2011_086
authors	Lassance, Guilherme; Libert, Cédric; Lassance, Patricia Figueira; Feghali, Maria Elisa
year	2011
title	The sensitive tower: Architectural and urban design education faced with fragile metropolitan ecologies
doi	https://doi.org/10.52842/conf.ecaade.2011.581
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.581-588
summary	Neighborhoods that are still outside the market target can find alternative ways of re-development. Therefore, it is necessary to design architectures compatible with their fragile ecologies. This research benefits from a previous study where we tried to observe the evolution of the uses of buildings and ways of living faced with changes in environmental conditions in a given urban context. Increased automobile traffic has led to changes in the use of residential spaces whose function was gradually replaced by commercial activities. Making use of graphic-oriented interpretation of urban ambiance and landscape analysis methodology applied to the design of different floor levels, this paper aims to introduce the concept of sensitive tower defined on the basis of observations made in our post-occupancy survey as a teaching strategy for the design studio faced with the current challenges of the contemporary metropolis.
wos	WOS:000335665500067
keywords	Design process; design education; contemporary metropolis; urban environment
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_211
id	sigradi2011_211
authors	Manferdini, Anna Maria; Cipriani, Luca
year	2011
title	Digital 3D Collections of Mosaics
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 560-563
summary	In this paper we present a methodology developed to access to Cultural Heritage information using digital 3d reality-based models as graphic interfaces. The case studies presented belong to the wide repertoire of mosaics of Ravenna, ranging from the byzantine to the modern ones. One of the most peculiar characteristics of mosaics that often limits their digital survey is their multi-scale complexity; nevertheless their models could be used in 3d information systems, for digital exhibitions, for reconstruction aims and to document their conservation conditions in order to conduct restoration interventions in digital environments aiming at speeding and performing more reliable evaluations.
keywords	Range and image-based technologies; 3d modeling; mosaics; digital collections; knowledge sharing
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2011_p124
id	cf2011_p124
authors	Verdonck, Evelien; Froyen Hubert
year	2011
title	Universal Design Patterns: Designing a Web-Based Tool with Architects
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 103-115.
summary	The implementation of Universal Design in design practice requires a number of tools that provide support to designers throughout the design process. In recent years, several studies have been carried out, determining methods to help designers select appropriate design support tools (DSTs), looking for desired data representation characteristics, or focusing on involving a wide range of users in the design process. This paper discusses how architects, as end-users of the DST, are involved in the development process of a new web-based tool based on the Universal Design Patterns concept. The Universal Design Pattern concept was developed based on Christopher Alexander‚Äôs Pattern Language, and looks at the possibility of using patterns to describe existing barriers in the built environment (conflicts), as well as design characteristics that may be implemented to make new designs more inclusive (resolutions). Through Universal Design Patterns, users can contribute new insights about the existing built environment, while architects can discuss the inclusive qualities of new design solutions or find useful design guidance. Involving the architects in developing the Universal Design Pattern concept into a web-based design tool is essential to establish a structure for the Universal Design Patterns that is compatible with the designers‚Äô way of thinking about design problems. Using the specific structure of Universal Design Patterns allows for the grouping of information into appropriately themed units on different levels of the design in a clear and uniform way. Building on the results of a survey involving 406 architects and a comparative study of existing DSTs for Universal Design, this paper first focuses on the results of a series of interviews that provided the basis for a first data-structure for the Universal Design Patterns tool. In addition to this, case-studies were carried out to ensure the new tool can easily be incorporated into the architects‚Äô design process. The results from both the interviews and the case-studies were combined in a preliminary model for the web-based tool. Finally, the methodology for testing this model with architects is discussed. In conclusion, some thoughts are given on the potential benefits of not only testing new DSTs with designers, but involving them actively from the early stages; or, in other words, the benefits of tools not only designed for architects, but with them.
keywords	Universal Design, Tools, Patterns
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_017
id	ecaade2011_017
authors	Achten, Henri; Koszewski, Krzysztof; Martens, Bob
year	2011
title	What happened after the “Hype” on Virtual Design Studios?: Some Considerations for a Roundtable Discussion
doi	https://doi.org/10.52842/conf.ecaade.2011.023
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.23-32
summary	The issue of collaborative design has been elaborated extensively within the framework of previous CAAD–conferences. Today, an appreciation for traditional attitudes and methods can be observed, but interestingly, a mixture of approaches is also noticeable (computational techniques used in low–tech fabrication environments, for example). This allows for a round–table survey of the current state–of–the–art focused on experiences related to distant learning in the architectural curriculum. To make VDS viable, not only are technological solutions necessary, but so are social (among people) and professional (ways of behavior) ones. In this round–table we aim to identify critical factors of success (or failure).
wos	WOS:000335665500001
keywords	Education; architectural curriculum; blended learning; collaborative design; VDS
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_145
id	ecaade2011_145
authors	Araújo, Leandro; Andrés, Roberto
year	2011
title	BIM.BON . A BIM system for architectural practice in Brazil
doi	https://doi.org/10.52842/conf.ecaade.2011.439
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.439-443
summary	This article discusses the difficulties faced by the BIM (Building Information Modeling) systems to be widely adopted among most part of architecture and engineering professionals in Brazil. A revision of the issue and investigation of possibilities for improving the practice of architecture were made by creating a new model of BIM software addressed to a wider audience. It lists the main critical points in the usability of BIM software, based on a survey made with 300 professionals. The analysis is followed by a study of a new BIM software that could reach a wider audience of architects by implementing a tool that directly links the users to the construction materials market, also including a tool for easy budgetary calculations.
wos	WOS:000335665500050
keywords	BIM Software; Architectural design; Architecture in Brazil; ICT; Collaborative design
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2013_043
id	caadria2013_043
authors	Freitas, Márcia Regina de and Regina Coeli Ruschel
year	2013
title	What is Happening to Virtual and Augmented Reality Applied to Architecture?
doi	https://doi.org/10.52842/conf.caadria.2013.407
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 407-416
summary	This paper presents the results of a comprehensive survey of activities on research and development of Virtual and Augmented Reality applied to architecture. 200 papers were reviewed, taken from annual conferences of the Association for Computer Aided Design In Architecture (ACADIA) and its sibling organizations in Europe (ECAADE and CAAD Futures), Asia (CAADRIA), the Middle East (ASCAAD) and South America (SIGRADI). The papers were grouped in research areas (design method, architectural theory and history, performance evaluation, human interaction, representation and process & management), emphasis (education, application, collaboration, visualization, practice and theory) and technology development stage (specification, development, application demonstration and evaluation). The period of study comprises 11 years, from 2000 to 2011. Findings for each category are described and key publications and authors are identified.
wos	WOS:000351496100040
keywords	Virtual reality, Augmented reality, Study of activity
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2011_125
id	sigradi2011_125
authors	Groetelaars, Natalie Johanna; Amorín, Arivaldo
year	2011
title	Tecnologia 3D Laser Scanning: Características Processos e Ferramentas para Manipulação de Nuvens de Pontos [3D Laser Scanning Technology: characteristics, processes and point cloud tools]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 490-494
summary	This paper presents techniques and tools to manipulate point cloud from terrestrial laser scanner. Firstly, architectural survey phases are presented, since planning and capturing point cloud of existing buildings, until processing and obtaining several products from point cloud data. Secondly, we cite and classify in four categories some point cloud software, used in laser scan survey and processing phases: (1) scan; (2) visualization; (3) processing; (4) quality inspection.
keywords	3D laser scanning technology; point cloud tools; geometrical modeling; architectural survey; computational tools
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2011_013
id	caadria2011_013
authors	Kozlova, Karine; Roham M. Sheikholeslami, Lyn Bartram and Robert F. Woodbury
year	2011
title	Graph visualization in computer-aided design: An exploration of alternative representations for GenerativeComponentsTM Symbolic View
doi	https://doi.org/10.52842/conf.caadria.2011.133
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 133-142
summary	In this paper we explore graph models used to illustrate the relationships between elements of designs in computer-aided design (CAD) systems. We discuss common limitations and ways to make such representations more usable and interactive. In order to study common problems of symbolic representations in CAD systems, we conducted a survey of a number of CAD applications that employ graph representations in their interface and provided comparative analysis of the properties of graph representations in these systems. As a case study we used Bentley GenerativeComponentsTM (GC) system - a parametric CAD application that uses graph (“symbolic”) view to visualize the structure of design. We conducted series of interviews with expert GC users that revealed many limitations of the GC symbolic view. To address these limitations, we developed alternative representations of symbolic view that aim at enhancing user experience with the system and reviewed these with expert GC users. As a result of our study, we developed a set of interactive prototypes using SHriMP1 visualization tool and Processing programming language. These provide improved ways of user interaction with symbolic representation, including better readability of the graph and, as a result, an improved support for design model analysis.
keywords	Graph visualization; visual interfaces; CAD systems; visual interaction; node-link diagrams
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ecaade2011_049
id	ecaade2011_049
authors	Marques, Luis Quelhas; Duarte, José P.; Jorge, Joaquim
year	2011
title	When form really follows function: Developing the prototype of a responsive exhibition pavilion
doi	https://doi.org/10.52842/conf.ecaade.2011.619
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.619-627
summary	The paper describes research developed with the aim of enquiring into the concepts of adaptability, transformation, and interactivity between the built space, its users and the surrounding environment to find appropriate responses to variations in spatial and functional needs, prompted by different uses and activities. After a look into the roots of kinetic architecture and a brief survey of the state of art, it presents the prototype of a responsive kinetic structure for a multi-purpose pavilion, concluding that by the integration of existing and emergent technologies, we now have the basic means to design and implement such structures.
wos	WOS:000335665500072
keywords	Architecture; kinetic; responsive; adaptability; interactivity
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2018_1612
id	sigradi2018_1612
authors	Miyasaka, Elza Luli; Minto Fabricio, Márcio; Paoletti, Ingrid
year	2018
title	Industry 4.0 and the Civil Construction in Brazil
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 690-694
summary	This paper aims to make an exploratory research about the dissemination of the purpose of Industry 4.0 concept in Brazil, that was introduced by Germany in 2011, especially in Architecture, Engineering and Construction sector. For this aim it was made a survey in magazines on line. As results was verified that the area that is discussing the concept are essentially productions engineering with a inexpressive repercussion in civil construction.
keywords	Industry 4.0, Digital Fabrication, Technopolítics, Brazil
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ijac20109101
id	ijac20109101
authors	Moloney, Jules; Bharat Dave
year	2011
title	From abstraction to being there: mixed reality at the early stages of design
source	International Journal of Architectural Computing vol. 9 - no. 1, 1-16
summary	We discuss the use of multiple design representations to enhance decision making at the early stages of design. Our interest is how the context in which design decisions are made can be extended by two interrelated approaches: (1) the incorporation of the temporal; (2) through the concurrent evaluation of qualitative representations and quantitative information. Outcomes from a practice survey and observations from design studios are used to inform the development of mixed reality (MixR) technology, to enable the applications to reflect architecture specific modes of design praxis. We propose two approaches - studio MixR and site MixR - reflecting the distinction between typical studio based design process and the requirements of a formal design review by the design team and stakeholders. Prototype applications have been implemented and a number of projects have been undertaken to illustrate some of the potential of mixed reality for architecture and urban design. These focus on the early stages of design, from the abstraction of parametric design to on site design reviews undertaken with augmented reality visualization.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2011_109
id	ecaade2011_109
authors	Pak, Burak; Verbeke, Johan; Ag-Ukrikul, Chotima
year	2011
title	Utilizing a Web-based Geographic Virtual Environment Prototype for the Collaborative Analysis of a Fragile Urban Area: An “Open-Source” International Urban Design Studio organized in Brussels
doi	https://doi.org/10.52842/conf.ecaade.2011.679
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.679-688
summary	In this paper, we will discuss the opportunities and challenges of using a Web-based Geographic Virtual Environment Prototype, primarily developed in the framework of a long-term research project by Pak and Verbeke (2011), as a complementary medium to support an international urban design studio. We reconfigured and rescaled this prototype with the objective of encouraging students to make a collaborative, open-source and location-based analysis of the fragile project area (the Brussels-Charleroi Canal) and share their findings with each other. During this eight week long experimental study, the students were able to effectively use the environment during the analysis phase of the urban design studio; despite their heterogeneous profiles. They created an online inventory that covers five gigabytes of analysis findings, sketches, photos, maps, studio presentations and texts describing their experiences. This environment shows the power of crowdsourcing and online collaborative analysis. Moreover, the findings of our online student survey demonstrate a general positive attitude towards the use of the Virtual Environment Prototype.
wos	WOS:000335665500079
keywords	Urban Design Studio; Web-based Virtual Environments; Integration of CAAD Research into Design Education; Collaboration
series	eCAADe
email
last changed	2022/05/01 23:21

_id	caadria2011_030
id	caadria2011_030
authors	Tan, Beng-Kiang and Jung-Ho Yeom
year	2011
title	Mirrored message wall: Bridging the real and virtual community
doi	https://doi.org/10.52842/conf.caadria.2011.311
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 311-320
summary	The Mirrored Message Wall is a cross-world digital public display located in both real and virtual world, for collective sharing of thoughts and messages and serves to connect the real world and virtual communities. The wall was installed at a university library foyer and concurrently at a 3D virtual campus for user studies. This paper presents its design, social factors considered in the design, implementation, and the findings of the user survey and observations. The results confirm that such an installation does encourage people to interact with each other and the results will inform a better design for the next version.
keywords	Virtual environment; second life; interactive message wall; public display; social interaction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2022_112
id	sigradi2022_112
authors	Toledo, Jimena
year	2022
title	The Role of Visual Platforms -visual Social Media- in the Creative Design Process
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 639–650
summary	In the current design practice, new digital tools have emerged -visual- also called Infrastructures (Perkel, 2011) such as; Behance 2003, Pinterest 2009, Archdaily 2008, Instagram (2010) -to cite the most recognized in the creative field in Argentina-, which promote different opportunities and support the creative process and problem solving, making it easier for designers to find inspiring material through the Internet. However, very little is known about how these new practices affect professional work, how they themselves see it and the tensions they generate.This article will present the results of a general survey applied to expert designers as part of the first stage of the Doctoral Research project. Which investigates the behavior referred specifically to the use of visual platforms -visual social media- in order to understand, characterize, describe the use and involvement of them within the design process.
keywords	Project processes - Creativity - Design process - Visual Social Media -Curatorial Practice
series	SIGraDi
email
last changed	2023/05/16 16:56

_id	cf2011_p011
id	cf2011_p011
authors	Verdonck, Evelien; Lieve Weytjens, Verbeeck Griet, Froyen Hubert
year	2011
title	Design Support Tools in Practice. The Architects' Perspective
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 769-784.
summary	In recent years, a large number of design support tools (DSTs) have been developed to address the ever increasing complexity and fragmentation of the architectural design process. Despite the omnipresence and the wide variety of DSTs available to architects today, literature reveals that there is still a mismatch between existing tools and design practice. Further examination of this discrepancy might reveal possible strategies for the improvement of tools. Therefore, this study investigates the Flemish architectural practice directly through a large-scale survey including 629 architects (nearly 10% of the population). The survey was based on a practice-oriented conceptual framework, which was developed as a theoretical background for this study. First the nature of the design process was explored through extensive literature review. In addition to this, a study of tools and possible classifications was carried out. Although numerous studies are available that provide a possible classification, most focus on specific design aspects, for instance sustainability or user-centered design. However, there is no general outline of tools available that would be adequate for the purpose of this research. The DSTs included in this study range from sketches and checklists to 3D CAD and simulation software, in other words any instrument intended to support one or more aspects of the design process. The findings from both literature studies were synthesized in the conceptual framework. This framework presents the design process as a linear process, consisting of the conceptual design phase, the preliminary design phase, the building permission phase, and the construction phase. Six categories of tools were defined, according to the roles they play in the design process, namely knowledge-based, presentation, evaluation/analysis, structuring, modeling, and communication. A tool can belong to one or more categories. The mapping of these roles on the design process resulted in the final framework, which was then used as a base for the questionnaire. The survey aimed at gaining insight into the different DSTs and their corresponding roles, as well as the design phases in which they are used or most needed by Flemish architects in architectural practice. In addition to this, the survey contained questions about the influence of tools on design decision-making, and the specific characteristics and qualities the designers prefer for design support tools. A final part of the survey asked about general background information, such as the respondents‚Äô age, size of architectural firm and types of projects usually undertaken. The results of the survey reveal that there are distinctly different needs for each of the roles defined, as well as a specific frequency of use within each design phase. Furthermore, the most popular tools often encompass multiple roles. Additionally, clear expectations for future tools are defined. Finally, the data collected show researchers and tool developers what kind of support designers need in the different stages of the design process, and may help them to develop DSTs accordingly, to maximize their usability and eventually contribute to decrease the gap between tools and practice.
keywords	design tools, architectural design process, survey
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cf2011_p098
id	cf2011_p098
authors	Bernal, Marcelo; Eastman Charles
year	2011
title	Top-down Approach for Interaction of Knowledge-Based Parametric Objects and Preliminary Massing Studies for Decision Making in Early Design Stages
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 149-164.
summary	Design activities vary from high-degree of freedom in early concept design stages to highly constrained solution spaces in late ones. Such late developments entail large amount of expertise from technical domains. Multiple parallel models handle different aspects of a project, from geometric master models to specific building components. This variety of models must keep consistency with the design intent while they are dealing with specific domains of knowledge such as architectural design, structure, HVAC, MEP, or plumbing systems. Most of the expertise embedded within the above domains can be translated into parametric objects by capturing design and engineering knowledge through parameters, constraints, or conditionals. The aim of this research is capturing such expertise into knowledge-based parametric objects (KPO) for re-usability along the design process. The proposed case study ‚Äì provided by SOM New York‚ is the interaction between a massing study of a high-rise and its building service core, which at the same time handles elevators, restrooms, emergency stairs, and space for technical systems. This project is focused on capturing design expertise, involved in the definition of a building service core, from a high-rise senior designer, and re-using this object for interaction in real-time with a preliminary massing study model of a building, which will drive the adaption process of the service core. This interaction attempts to provide an integrated design environment for feedback from technical domains to early design stages for decision-making, and generate a well-defined first building draft. The challenges addressed to drive the instantiation of the service core according to the shifting characteristics of the high-rise are automatic instantiation and adaptation of objects based on decision rules, and updating in real-time shared parameters and information derived from the high-rise massing study. The interaction between both models facilitates the process from the designer‚Äôs perspective of reusing previous design solutions in new projects. The massing study model is the component that handles information from the perspective of the outer shape design intent. Variations at this massing study model level drive the behavior of the service core model, which must adapt its configuration to the shifting geometry of the building during design exploration in early concept design stages. These variations depend on a list of inputs derived from multiple sources such as variable lot sizes, building type, variable square footage of the building, considerations about modularity, number of stories, floor-to-floor height, total building height, or total building square footage. The shifting combination of this set of parameters determines the final aspect of the building and, consequently, the final configuration of the service core. The service core is the second component involved in the automatic generation of a building draft. In the context of BIM, it is an assembly of objects, which contains other objects representing elevators, restrooms, emergency stairs, and space for several technical systems. This assembly is driven by different layouts depending on the building type, a drop-off sequence, which is the process of continuous reduction of elevators along the building, and how this reduction affects the re-arrangement of the service core layout. Results from this research involves a methodology for capturing design knowledge, a methodology for defining the architecture of smart parametric objects, and a method for real-time-feedback for decision making in early design stages. The project also wants to demonstrate the feasibility of continuous growth on top of existing parametric objects allowing the creation of libraries of smart re-usable objects for automation in design.
keywords	design automation, parametric modeling, design rules, knowledge-based design
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20109301
id	ijac20109301
authors	Biloria, Nimish
year	2011
title	InfoMatters, a multi-agent systems approach for generating performative architectural formations
source	International Journal of Architectural Computing vol. 9 - no. 3, 205-222
summary	The research paper exemplifies upon a computationally intensive inter-disciplinary research driven design investigation into spatializing the relationship between digital information and physical matter. Focusing on the development of architectural scale urban inserts, the design-research work operates on the intersection of information technology, environmental design, architecture, and computer aided manufacturing domains.The research framework revolves around developing a seamless integration of the aforementioned disciplines in order to establish iterative simulation driven methodologies for generating bottom-up sustainable architectural formations. This is achieved by establishing parametrically driven relational linkages between differential data sets (environmental, social, topological, material etc), which formulate the context (both global and local) within which the proposed project has to be designed. A selforganizing multi-agent system based simulation methodology for generating resultant spatial formations, in time, based on the impacts of the parametric relationships between the aforementioned data sets is eventually embarked upon. This implies, understanding the site as a dynamic information field within which interdependent ecology of agents (representing typology of people, program, structure, speed, desired social interaction etc) with multi-level relational affinities amongst each other as well as the dynamic urban information field. The resultant self-organized multi-agent formations are iteratively mined for identifying logical three-dimensional structural patterns or subjected to programmatic and environmental need driven additional layer of structural simulation with pre-embedded material restraints. An optimized system of multi-performative components that not only populates but also serves as an integrated structural + skin system of the results obtained from the agent based simulations (based upon the degree of inclusion/exclusion of parameters such as the amount of light, sound, wind etc) is subsequently generated. These experimental projects attained the status of self-evolving ecologies of multi-dimensional agents with embodied behavioural profiles, thus providing engaged, highly interdependent design by simulation outputs. The outputs showcase a dynamic system's driven approach towards sustainable design by stressing upon the idea of cohesively binding information and material systems from the very beginning of the design process. Such approaches help in reducing post-optimization of built form and consequently allow for rational understanding of performance criteria and its impact on formal articulations throughout the design process.
series	journal
last changed	2019/05/24 09:55

For more results click below: