Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 562

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_099
id	ecaade2011_099
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.799-808
doi	https://doi.org/10.52842/conf.ecaade.2011.799
wos	WOS:000335665500092
summary	As computational design processes have moved from representation to simulation, the focus has shifted towards advanced integration of performance as a form defining measure. Performance, though, is often assessed purely on the level of geometry and stratified between hierarchically independent layers. When looking at tension-active membrane systems, performance is integrated across multiple levels and with only the membrane material itself, defining the structural, spatial and atmospheric qualities. The research described in this paper investigates the integrative nature of this type of lightweight structure and proposes methodologies for generating highly articulated and differentiated systems. As material is a critical component, the research focuses on a system-based approach which places priority on the inclusion of material research and parameterization into a behavior-based computational process.
keywords	Material behavior; material computation; system; gestalt; tension-active system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_82
id	acadia11_82
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
doi	https://doi.org/10.52842/conf.acadia.2011.082
summary	With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2011_084
id	sigradi2011_084
authors	Alves, Gilfranco; Pratschke, Anja
year	2011
title	Mediação digital e revisão dos processos de design em Arquitetura [Digital mediation and review of design processes in Architecture]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 35-38
summary	This paper presents partial results of doctoral research entitled Architecture, Semiotics and Second Order Cybernetics: observation, representation and performance in design process. The research is linked to the Nomads.usp research group and proposes a review of design process, considering the mediation of digital media by using concepts of Second order Cybernetics. This work start with the hypothesis that in a contemporary context, professional demands of architects and designers requires a different approach in relation to the concept of emergence in architecture, and also describes an experiment during the AA Visiting School SP 2011, the Strings / Supple Pavilion project.
keywords	Design processes; digital media; emergence; performance.; Second-order Cybernetics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_264
id	sigradi2011_264
authors	Araneda, Claudio
year	2011
title	Hacia un Estudio del Protofenómeno Urbano: Rudimentos Analíticos para una Aproximación Fenoménica al Estudio de la Percepción de Seres Humanos en el Espacio Urbano [Towards a Study of the Urban Protophenomenon: Analytical Rudiments for a Phenomenological Approximation to the Study of the Perception of Human Beings in Urban Space]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 534-537
summary	This work outlines the theoretical and methodological framework for the development of analytical rudiments contributing to the registry, cartography and quantification of the urban phenomenon understood not as urban space perception but rather, as human beings perception within urban space. It argues that this approach to urban studies is part of a scarcely explored lineage within the field of urban analysis. One that, much in the same way as the widely used topological/ structural approach, reveals key quantifiable information, mainly, in terms of real or effective density and therefore, of high value for the design of micro and meso urban scales.
keywords	Urban phenomenon; urban protophenomenon; phenomenology, urban analysis, space syntax
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_328
id	sigradi2011_328
authors	Arenas, Felipe; Banda, Pablo
year	2011
title	Morfología de Datos y Desterritorialización: Integrando sentido al diseño paramétrico [Data Morphology and Deterritorialization: Integrating meaning into Parametric Design]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 381-385
summary	This paper reflects about the potential of integrating meaning into parametrics that can be produced by the linkage between information visualization interfaces and custom parametric modeling systems. The inclusion of unstable semantics from web-based geo-referenced information is proposed, as driver for producing extreme differentiation and systemic complexity in contemporary design practices.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_198
id	sigradi2011_198
authors	Aroztegui Massera, Carmen
year	2011
title	La cámara en la animación de arquitectura. Reconsiderando “la mirada” y el régimen de mostración en el cine [The Camera in Architectural Animation. Reconsidering “The Gaze” and The Registration Regime in the Cinema]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 432-435
summary	Even though inspired by cinema, architecture animations often oversimplify filmic space, and conflate two distinct concepts: gaze, and vision. Such misinterpretation leads to overuse camera movement to present spaces as if the change of point of view would lead to communicate lived space. This article introduces such discussion in the context of the tableau vivant, a living picture, explores the use of the shot sequence and the use of non-narrative scenes.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_409
id	sigradi2011_409
authors	Bertoni, Griselda; De Monte, Andrea
year	2011
title	Mediaciones perceptivas. Desafíos en la incorporación de la tecnología como instrumento potenciador del proceso de aprendizaje en el TCG [Perceptual mediation. Challenges in incorporating technology as a tool enhacing the learning process in the TCG]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 472-475
summary	This work presents an introduction to current problems detected in the teaching and learning of perceptual and communication processes in front of the availability of disipositivos installed and digital media courses to students enrolled for Design and Architecture careers of our faculty. The same seeks to clarify a state of affairs to continue studies already carried out (Stipech 2004), (Bertero 2009), in relation to issues of representation in the design disciplines, while rehearsing possibilities updated theory and practice in the field of workshop.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_359
id	sigradi2011_359
authors	Bessone, Miriam; Milone, Diego; Irsuta, Maximiliano
year	2011
title	Relaciones sinestésicas entre la música y la forma visual: hacia una identificación automatizada a través de métodos computacionales [Synaesthetic relations between music and visual shapes: towards automated identification using computational methods]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 289-293
summary	In this paper, relations between music and visual perception are investigated using statistical analisys of the entailment made amongst them by different subjects in several experimental situations designed for such purpose. The goal, is to discover a set of elements and management mechanisms that are common to both field, from wich it is posible to detect significant constants and discard atypical relations. Finally, we will seek to develop a series of mathematical models that may be implemented as software to analize music and synthesis of forms, and simulate human analisys of relations between them.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2011_136
id	ecaade2011_136
authors	Bohnenberger, Sascha; de Rycke, Klaas; Weilandt, Agnes
year	2011
title	Lattice Spaces: Form optimisation throgh customization of non developable 3d wood surfaces
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.751-758
doi	https://doi.org/10.52842/conf.ecaade.2011.751
wos	WOS:000335665500087
summary	This paper discusses a collaborative project by RDAI architects, Bollinger+Grohmann and the timber construction company Holzbau Amann. The project is located in a former swimming pool in Paris and it is part of the new interior of a flagship store of the French fashion label Hermes. In late 2009, Rena Duma Architects, asked Bollinger+Grohmann to collaborate as structural engineers on a challenging design proposal within a very short timeframe. Three wooden lattice structures, the so-called “bulle” and one monumental staircase with a similar design approach characterize the interior of the new flagship store. The lattice structures are dividing the basement into different retail spaces. They vary in height (8-9 m) and diameter (8-12 m) and have a free-form shaped wicker basket appearance. Wood was the chosen material for these structures to strengthen the idea of the wickerbaskets and to create an interior space with a sustainable and innovative material.
keywords	Digital production; parametric design; mass customization; wood; digital crafting
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_350
id	sigradi2011_350
authors	Borda, Adriane; Pires, Janice; de Vasconcelos, Tássia; dos Santos Nunes, Cristiane
year	2011
title	Trajetórias de Aprendizagem em Representação Gráfica Digital [Learning in Paths Digital Graphic Representation]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 167-170
summary	This paper describes a process of delimitation of learning trajectories in Digital Graphic Representation, for training in architecture. These paths are configured by an exercises sequence of representation of architectural works, selected so as to contemplate broader concepts and techniques possible in terms of formal settings. From the provision of learning materials are being promoted moments of ownership of digital techniques of representation, incorporating educational objectives of the disciplines of Design, Architecture and Computer Science Applied to Geometry.
keywords	Learning paths; digital graphics representation; architectural works; teaching materials
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_120
id	sigradi2011_120
authors	Briones, Carolina
year	2011
title	Diseño digital y manufactura artesanal, ejemplos de diseño paramétrico en Chile [Digital design and handcrafted manufacturing, examples of parametric design in Chile]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 60-63
summary	The present article tracks and attempts to portray the current state of the art, in relation to the application of parametric or algorithmic design in Chilean architecture and design production. These technologies have emerged in the last decades and have become increasingly popular in the international arena. Through the presentation of examples made at different scales, the processes of digital and traditional manufacture used in each work of art are revealed. The difficulties, advantages and virtues of these tools are discussed and addressed from a local educational and professional perspective.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_157
id	sigradi2011_157
authors	Burneo Valdivieso, Xavier Eduardo
year	2011
title	No es esto lo que hacen los arquitectos? Experiencias y aplicaciones de herramientas digitales en los talleres de diseño [Is not this what architects do? Experiences and applications of digital tools in design workshops]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 82-85
summary	This paper shows under the framework of research and teaching project developed at the Technical University of Loja, Ecuador, with the participation of students in the school of architecture, taking aim through the study of theory and a series exercises to strengthen the relationship between the methods of generative design and digital technologies in architectural projects from creation to completion display, to achieve better teaching and learning as the architect insert specific language in society and contemporary architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2011_356
id	sigradi2011_356
authors	Bustos Lopez, Gabriela; González, Giscard; Rincón, Francisco
year	2011
title	Arquitectura Interactiva, reacción, comportamientos y transformaciones en el Programa de Diseño Digital [Interactive architecture, reaction, behaviors and transformations in the Digital Design Program]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 171-175
summary	This paper shows an academic strategy of production in the Interactive Architecture´s Mention of the Digital Design Diploma from the School of Architecture and Design at the University of Zulia, like weaves of reactions in the process of creation in the virtual space in 3D, and its establishment like interactive architectonic devices, jointly with a conceptual exposition that is based on the interactivity definition from the complex epistemology vision. It is the manifestation of an academic experience developed within the framework of both theoretical and practice exposition, based on the complex epistemology of the design with digital technology.
keywords	Architecture, interactivity; digital design; intelligent behaviors
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2010_100
id	sigradi2010_100
authors	Cardoso, Daniel Ribeiro;Oliveira Limaverde Maira; Carvalho Cavalcante Sofia
year	2010
title	Uma experiência de projeto colaborativo [An experience of collaborative project]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 100-103
summary	The purpose of this paper is to describe work based on new techniques for collaborative projects, which were created and are being used to carry out the architectural design of the structure that will host a gathering of students of architecture and urbanism that will take place in January, 2011, in the state of Ceara, Brazil.
keywords	architecture; design process; collaborative process; digital media; new media.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2011_172
id	sigradi2011_172
authors	Castañé, Dora; Tessier, Carlos
year	2011
title	Estrategias Implementales en la Investigación Patrimonial. 3 casos de modelos urbanos digitales [Implementales strategies in the heritage research. 3 Cases of digital urban models]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 86-89
summary	This paper shows 3 digital models implemented in two research product of a team of researchers of CONICET, CEDODAL projects who have been developing various annual proposals. The objective of this work is to show the implementales strategies used in each case. With the digital technological tools of three-dimensional modelling and its interfaces from spatial databases with different levels of complexity representational 2d-3d-4 d-5 d, applied to the recognition and research of this cultural and urban architectural heritage. Who allowed to store and retrieve information in multiple formats with a diversity of views to the review and analysis.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2011_071
id	sigradi2011_071
authors	Chiarella, Mauro
year	2011
title	Pliegues despliegues y repliegues Didáctica proyectual e instrumentos de Ideación [Foldings, unfoldings and refoldings. Pedagogy for the project and instruments of ideation]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 27-30
summary	The international architecture of the last decades has examples of works and architectural projects presented graphic from the two-dimensional unfolding of three-dimensional folded surfaces. These valuable individual experiences have not represented generalized strategies that can be transferred to the professional practice and to architectural education. This article uses results of more than 10 workshops (with Unfolding and Folding methodologies) developed in Chile, Argentina and Brazil to build up a pedagogy for the project that makes it possible to investigate the spatial and material properties of folded compositions in Architecture. It proposes to review and update project instruments through the incorporation of Parametric Design; 3D origami software and Digital Manufacturing.
keywords	Folded compositions; pedagogy for the project; parametric design; digital manufacturing
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2011_391
id	sigradi2011_391
authors	Claro, Ana Julia
year	2011
title	Herramientas digitales para la ideación y desarrollo de formas complejas [Digital tools for conception and development of complex forms]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 197-200
summary	The aim of this investigation is to study the connection between geometry and architecture, nowadays strongly stimulated by the use of digital tools, design and fabrication. At the same time, it expresses the need to develop interdisciplinary processes when analyzing the conception and construction of complex forms in the architecture, focusing on creating a computer application in charge of the unfold of NURBS surfaces, carried out for this study.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ecaade2011_083
id	ecaade2011_083
authors	Coutinho, Filipe; Costa, Eduardo Castro e; Duarte, José P.; Kruger, Mário
year	2011
title	A computational interpretation of ”De re aedificatoria”: Translating Alberti’s column system into a shape grammar
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.788-798
doi	https://doi.org/10.52842/conf.ecaade.2011.788
wos	WOS:000335665500091
summary	Alberti’s ”De re aedificatoria” is considered one of the most influential treatises of architecture. Historic approaches aimed at tracing such an influence on European architecture have relied mainly on documental sources. The extent of such an influence, however, remains elusive. The research described in this paper is part of a larger project aimed at using the computational framework provided by shape grammars to determine the extension of such an influence on the architecture of the Portuguese empire in the counter-reform period. The idea is to translate the treatise into a shape grammar and then determine the transformations required for the grammar to account for the generation of the buildings designed and built in this geographic region. The paper presents a grammar for the Albertian column system, focusing on the Doric order. Subsequent work will be concerned with identifying the transformations of this grammar in the Portuguese context.
keywords	Alberti; generative design; shape grammars; transformations in design, design automation
series	eCAADe
email
last changed	2022/05/01 23:21

_id	sigradi2011_301
id	sigradi2011_301
authors	Cáceres Corvalán, Katherine; Calvo Castillo, Francisco
year	2011
title	Pieles Responsivas: Desarrollo de Infraestructuras Adaptables a su Entorno [Responsive Skins: Development of environment adaptable infrastructures]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 139-142
summary	This paper describes the authors' experience in the development and implementation of five academic instances linked to the research of design protocols based on parametric modeling and manufacturing techniques. The theme developed focus on the responsive skins, understood as a new kind of infrastructure capable of adapting to different geometric and topological configurations influenced by the information supplied from the environment at a specific time.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2012_333
id	sigradi2012_333
authors	da Silva, Isabelle Maria Mensato; Viz, Simone Helena Tanoue
year	2012
title	Ensino de Arquitetura e Urbanismo com auxilio de ferramentas digitais [Teaching Architecture and Urbanism with help of digital tools]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 522-526
summary	This article aims to discuss the importance of freehand drawings in the architectural projective process in the context of the digital age, through the use of tablets. It is intended to identify how these drawings, using tablets, keep the perception and the personal dash of each one. This research aims not only to review and update the drawing´s disciplines in the architecture courses - its practices and procedures - but also to discuss the actual role of representation - analogical or digital - and its interaction with others disciplines. The first research, done in 2011, indicated possibilities of interface with CAD, Revit and Sketch-up. The second part, in course in this year, 2012, is trying to experiment the use of tablets in three others disciplines: History of Architecture and Urbanism I, Landscaping and Project I, in the Instituto de Arquitetura e Urbanismo da USP, São Carlos, Brasil.
keywords	freehand drawing, graphic, tablet, digital media
series	SIGRADI
email
last changed	2016/03/10 09:50

For more results click below: