Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 561

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_020
id	ecaade2011_020
authors	de la Barrera Poblete, Carlos Ignacio
year	2011
title	Evolutionary Strategy to Design Optimized Architecture
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.293-301
doi	https://doi.org/10.52842/conf.ecaade.2011.293
wos	WOS:000335665500033
summary	The purpose of the present experiment consists in optimizing a building modifying its apertures (windows) and its geometry to reduce heating and air conditioning consumption. The optimization is performed using a Micro-Genetic Algorithm (Micro-GAs) programmed in C# embedded like a series of functions into GenerativeComponents (GC). EnergyPlus (E+) software is used to evaluate the HVAC consumption levels of the building. The aim of the optimization is to keep the temperature at 20ºC on the hottest and coldest day using the least possible energy (Jules). In conclusion, this article proposes a new technique based on parametric modelling, evaluation and evolutionary optimization to generate efficient buildings with HVAC consumptions.
keywords	Optimization; Parametric design; Genetic Algorithms; Energy Consumption; Architecture
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_170
id	acadia11_170
authors	El Sheikh, Mohamed; Gerber, David
year	2011
title	Building Skin Intelligence: A parametric and algorithmic tool for daylighting performance design integration
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 170-177
doi	https://doi.org/10.52842/conf.acadia.2011.170
summary	The research presents a methodology and tool development which delineates a performance-based design integration to address the design, simulation, and proving of an intelligent building skin design and its impact on daylighting performance. Through the design of an algorithm and parametric process for integrating daylighting performance into the design phase an automated configuration evaluation is achieved. Specifically the tool enables design exploration of semi autonomous and fully autonomous configurations of an exterior building envelope louver system. The research situates itself in the field of intelligent building skins and adds to the existing solutions a validation of systems with interdependent louvers of varying tilt angles. The system is designed to respond to dynamic daylighting conditions and occupants’ preferences. Within the framework of this study, Grasshopper, Rhino, Galapagos and DIVA, are linked and coded into one integrated process, facilitating design optioneering with near real time feedback. The paper concludes with a description of the tool set’s extensibility, future incorporation of domain integration, and conflation of natural and physical system interaction and complexity.
keywords	kinetic facades; parametric design; design integration; daylighting; performative design; design optioneering; realtime feedback
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2011_130
id	ecaade2011_130
authors	Güngör, Özge; Ça_da_, Gülen; Balaban, Özgün
year	2011
title	A Mass Customization Oriented Housing Design Model Based on Genetic Algorithm
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.325-331
doi	https://doi.org/10.52842/conf.ecaade.2011.325
wos	WOS:000335665500037
summary	Today, right along with the products marketed and manufactured by the mass production techniques, continuously developing computing and technology have an undeniable impact on customized design, in which the users have a say on the products design and manufacturing. Mass customization is slowly settling down in architectural design concepts as well, like housing which is one of the best areas where users can reflect their living habits and preferences. In this study, user centric mass customization based model is developed, which creates housing floor plan combining the user-supplied data with the best possible creations generated by the genetic algorithms.
keywords	Architectural Design Computing; Housing Design; Genetic Algorithm; Mass Customization
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p019
id	cf2011_p019
authors	Haeusler, Matthias Hank; Beilharz Kirsty
year	2011
title	Architecture = Computer‚ from Computational to Computing Environments
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 217-232.
summary	Drawing on architecture, urban digital media, engineering, IT and interaction design, the research presented in this paper outlines a possible shift from architecture designed through computation (any type of process, algorithm or measurement done in a computational matter) towards architecture capable of computing (developing, using and improving computer technology, computer hardware and software as a space-defining element). The research is driven by recent developments in four fields, as follows: (a) Architecture in its recent development has shifted from a planar box, as was the ideal in the modernist movement, towards complex and non-standard forms. (b) The design concepts of non-standard surfaces have been adopted into media facades and media architecture by liberating the pixel from its planar position on a screen [1]. (c) Advancements in pervasive computing applications are now able both to receive information from the environment in which they are used and to detect other devices that enter this environment [2]. (d) Developments in advanced autonomous systems such as Human Computer Interaction (HCI) or Human Robot Interaction (HRI), have produced intelligent systems capable of observing human cues and using these cues as the basis for intelligent decision-making [3]. Media fa_ßade developments work in the direction of the above-mentioned four fields, but often come with limitations in architectural integration; they need additional components to interact with their environment and their interactions are both often limited to visual interactions and require the user to act first. The researched system, Polymedia Pixel [4] discussed in this paper, can overcome these limitations and fulfil the need for a space-defining material capable of computing, thus enabling a shift from architecture designed by computation towards architecture capable of active computing. The Polymedia Pixel architecture merges digital technology with ubiquitous computing. This allows the built environment and its relation with digital technology to develop from (a) architecture being represented by computer to (b) computation being used to develop architecture and then further to where (c) architecture and the space-defining objects have computing attributes. Hence the study presented aims to consider and answer this key question: ‚ÄòWhen building components with computing capacity can define space and function as a computer at the same time, what are the constraints for the building components and what are the possible advantages for the built environment?‚Äô The conceptual framework, design and methods used in this research combine three fields: (a) hardware (architecture and design, electronic engineering) (b) software (content design and IT) and (c) interaction design (HCI and HRI). Architecture and urban design determinates the field of application. Media architecture and computer science provide the technological foundation, while the field of interaction design defines the methodology to link space and computing [5]. The conceptual starting point is to rethink the application of computers in architecture and, if architecture is capable of computing, what kind of methodology and structure would find an answer to the above core research question, and what are the implications of the question itself? The case study discusses opportunities for applying the Polymedia Pixel as an architectural component by testing it on: (a) constraint testing ‚Äì applying computational design methodologies to design space (b) singular testing - discussing the advantages for an individual building, and (c) plural testing ‚Äì investigating the potential for an urban context. The research aims to contribute to the field of knowledge through presenting first steps of a System < - > System mode where buildings can possibly watch and monitor each other, additional to the four primary interactive modes of operation. This investigation, its proposed hypothesis, methodology, implications, significance and evaluation are presented in the paper.
keywords	media architecture, computational environments, ubiquitous computing, interaction design, computer science
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadiaregional2011_024
id	acadiaregional2011_024
authors	Hillukka, Daniel
year	2011
title	Interior Climate Optimization by Volumetric Adjustment
source	Parametricism (SPC) ACADIA Regional 2011 Conference Proceedings
doi	https://doi.org/10.52842/conf.acadia.2011.x.j1c
summary	This research focuses primarily on the functionality of software, specifically Rhinoceros (McNeel & Assoc.) and a few associated PlugIns (Grasshopper, Rhino Assembly), to create and control a model of a building to study the environmental effects of modulation of space. Has technology been completely utilized in addressing comfort maintenance within a dwelling space? For example, animals have a similarities based upon their surface to volume relationship, yet they are able to adjust the ratios based on a reaction to their environmental circumstances. For example, when cold, they are able to “fluff” their fur in order to minimize their surface area in comparison to an increasing “interior” volume. Historically, abilities to influence temperature change within a space have been relegated to passive air exchange systems and more recently completely active air exchange means of control. Technological advances have raised significant questions towards methods and means for this control. Through use of 3D models and simulations, the topic of climate maintenance in spatial conditions was addressed using environmental controls. Thus modulation of the interior climate as well as the space could simultaneously occur to create a radically different space of habitation. The preparation and writing of this abstract addressed various areas of the SPC requirements, which become apparent during the digestion of the paper.
keywords	Rhinoceros, Grasshopper, Rhino-Assembly, volume, operable architecture, parametric components, climate optimization, dynamic constructs
series	ACADIA
last changed	2022/06/07 07:49

_id	ecaade2011_008
id	ecaade2011_008
authors	Kolovou, Eleni
year	2011
title	Sensitive skin design: a generative approach
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.453-460
doi	https://doi.org/10.52842/conf.ecaade.2011.453
wos	WOS:000335665500052
summary	This paper presents a framework of study of an iterative evolution of a modular component designed in an attempt to simulate material constraints and motional response with the perspective to be multiplied into a dynamic system. The main scope of this project was to investigate the process that maps a territory of possibilities, among which lies the potential architectural solution. In order to explore this field a parametric model has been developed. The simulation of the materials nature has been embedded in the algorithm on a geometry constraint basis in an attempt to simulate the behavior of the system comprised by elements in tension and torsion. A multiplication process of the module was introduced at a following stage of the research focusing on regular tessellations and circle packing on the plane. Responsive performance has been studied on a selected specimen of the evolution given a hypothetic context scenario according to which the scale of the design was set at a façade component level. The resulting responsive permeable skin was presented as a potential design solution among the successive approximations of this algorithm. Along the course of the research the parametric tools were used not only as a medium of synchronous output visualization but also as a mechanism to simulate material properties, structural constrains, environmental data, and worked as stimuli of inspiration driving the overall design process.
keywords	Parametric design; generative design; simulation and visualization; responsive skin
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_069
id	ecaade2011_069
authors	Lee, Seongki
year	2011
title	Feasibility Computation of the Perimeter Block Housing in Early Design Process: A Perimeter Block Housing Design based on Zone Ordinance of Seoul
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.235-244
doi	https://doi.org/10.52842/conf.ecaade.2011.235
wos	WOS:000335665500026
summary	The goal of this paper is to present the feasibility computing tool for the perimeter block housing design in early design process. Firstly, the paper describes briefly issues of perimeter block housing focusing on block design cases of Seoul. Secondly, constraints and requirements of perimeter block housing are analysed and formulated based on specific zone ordinance and regulation. Thirdly application of half-edge data structure is presented for interconnected geometric problem solving. Fourthly, multi-objective optimization algorithm developed is shortly explained as problem solving method. Finally, feasibility-computing software using Java object oriented programming is developed. This can contribute to the tool development that can generate, optimize, evaluate and visualize perimeter block housings in early phases of design process by providing reliable design solutions for stakeholders.
keywords	Perimeter block housing; design-constraints; parametric design; multi-objective optimization problem; design support system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2017_265
id	ecaade2017_265
authors	Motalebi, Nasim and Duarte, José Pinto
year	2017
title	A Shape Grammar of Emotional Postures - An approach towards encoding the analogue qualities of bodily expressions of emotions
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 485-492
doi	https://doi.org/10.52842/conf.ecaade.2017.2.485
summary	This paper is concerned with the translation of analogue qualities of human emotions into digital readings. Human body postures are considered as one of the main behavioral conduits for non-verbal communication and emotional expressions (Shan et.al., 2007). This research is the first step towards identifying and detecting emotions through posture analysis of users moving through space; leading towards generating real time responses in the form of spatial configurations to users' emotions. Such spatial configurations would then help inhabitants reach certain emotional states that would enhance their life quality. In order to achieve this goal, we propose a methodology for developing a comprehensive shape grammar algorithm that could evaluate and predict bodily expressions of emotions. The importance of this study lies under the embodied interactions (Streech et.al., 2011) in space. As the circumfixed space impacts the embodied mind, the body impacts its surrounding including the architectural space.
keywords	Shape Grammar; Computation; Emotion; Posture; Interactive Architecture
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2011_149
id	ecaade2011_149
authors	Popov, Nikolay
year	2011
title	Generative sub-division morphogenesis with Cellular Automata and Agent-Based Modelling
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.166-174
doi	https://doi.org/10.52842/conf.ecaade.2011.166
wos	WOS:000335665500019
summary	This paper reports on some recent research carried out to develop computational generative urban design system that can be used as an alternative approach to master planning. The focus of the investigation is an 11 ha site located in the South-East edge of Auckland, New Zealand. The urban (or sub-urban) morphology is modelled as cellular automaton based on Hillier’s (1984) x-y syntax in order to resemble the morphology of the existing village. An agent based system based on Reynolds’ (1987) flocking algorithm evolves synchronously with the automaton and tests its ecological fitness. The emergent pattern of development therefore results from the mutual co-adaption of the cellular automaton and the agent based model. The outcomes are variety of spatial morphologies that connects well with adjacent existing village and at the same time take into account landscape and ecological peculiarities of the site.
keywords	Generative urban design; structural coupling; cellular automata; agent based modelling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	cf2011_p104
id	cf2011_p104
authors	Sherif, Ahmed; El Zafarany Abbas
year	2011
title	Designing the Window to Fit a Shading Device, A Reversed Method for Optimizing Energy Efficient Fenestration
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 383-399.
summary	Solar radiation passing through a window contributes significantly to cooling loads and energy consumption, especially in hot climates. Most CAAD tools handling energy efficient design help designers to define the optimal shading device to protect a window of a certain shape, usually a rectangle, but some parts of the rectangular window (such as lower corners) are typically difficult to protect. Usually the whole shading device becomes bigger to shade these corners, which over-shades the rest of the window, increasing artificial lighting and heating loads. It also increases the complexity, visual impact and cost of the shading device. Changing the shape of the window by cutting these corners may reduce the size of the shading device considerably, which opens way to a different –or even a reversed- approach: “Designing the window to fit a shading device instead of designing the shading device to fit the window!” This approach has several potential applications. The building form itself sometimes works implicitly as a shading device. For example, if the building plan shape is a U or L shape, some parts of the walls become shaded, the windows can be placed in these shaded parts, and the window shape can be designed to fit the shadow pattern caused by the building form, changes in the building profile gives similar chances to design windows that fit the shadow pattern. Conceptually, this approach makes energy efficiency a form giving attribute, helping to create innovative facades, while giving an energy efficient configuration for both window and its shading device. CAAD tools can help the designer adopt such an innovative approach, by proposing the window shape that suits an arbitrary shading device created by the designer or a building mass. This paper examines the validity of the approach and introduces the approach required for developing a software module that can be integrated with other CAAD tools such as the Ecotect software. This would enable the designers to use this approach. The method handles the complexity of time-dependent solar geometry and radiation intensity, the geometry of both the window and shading device, and the designers set of objectives, enabling the designer to define the required configuration of window and shading device.
keywords	Energy Efficiency, Low Energy Architecture, Windows, Shading Devices, Algorithm, Oprimization
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2011_011
id	ecaade2011_011
authors	Spaeth, A. Benjamin ; Menges, Achim
year	2011
title	Performative Design for Spatial Acoustics: Concept for an evolutionary design algorithm based on acoustics as design driver
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.461-468
doi	https://doi.org/10.52842/conf.ecaade.2011.461
wos	WOS:000335665500053
summary	The paper presents a performance-oriented design explorer tool focusing on finding spatial concepts based on acoustic parameters. The design explorer is a genetic evolutionary algorithm realizing evaluation through room acoustical and room morphological criteria. The paper describes the concept of the design system focusing on the synthesis of geometry, assignment of material properties, on the implementation of evaluation criteria and on the description of relevant acoustic criteria. The presented experimental algorithm is part of doctoral research work in progress. It marks a research milestone describing the concept and implementation of an evolutionary algorithm for spatial acoustics and presenting results produced by the proof of concept algorithm.
keywords	Performative design; room acoustics; evolutionary algorithm; design methodology
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_022
id	ecaade2011_022
authors	Achten, Henri
year	2011
title	Degrees of Interaction: Towards a Classification
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.565-572
doi	https://doi.org/10.52842/conf.ecaade.2011.565
wos	WOS:000335665500065
summary	In architecture various approaches have been developed do deal with changing demands on the building. The most recent development is interactive architecture. In this paper we aim to outline what interactive architecture is. First we define the type of performance behavior that an interactive building or environment has. Following, we consider the relation between the system and the user. We derive four types of relations, characterized as “perfect butler,” “partner,” “environmental,” and “wizard.” Interactive systems are composed of sensors, controllers, actuators, and materials. Various degrees of interactivity can be achieved with such systems, ranging from passive, reactive, autonomous, to agent systems. Complete with earlier discussion of design methods this provides the range of aspects that should be considered when designing interactive architecture.
keywords	Interactive architecture; Human-Computer interaction; design theory
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ecaade2011_017
id	ecaade2011_017
authors	Achten, Henri; Koszewski, Krzysztof; Martens, Bob
year	2011
title	What happened after the “Hype” on Virtual Design Studios?: Some Considerations for a Roundtable Discussion
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.23-32
doi	https://doi.org/10.52842/conf.ecaade.2011.023
wos	WOS:000335665500001
summary	The issue of collaborative design has been elaborated extensively within the framework of previous CAAD–conferences. Today, an appreciation for traditional attitudes and methods can be observed, but interestingly, a mixture of approaches is also noticeable (computational techniques used in low–tech fabrication environments, for example). This allows for a round–table survey of the current state–of–the–art focused on experiences related to distant learning in the architectural curriculum. To make VDS viable, not only are technological solutions necessary, but so are social (among people) and professional (ways of behavior) ones. In this round–table we aim to identify critical factors of success (or failure).
keywords	Education; architectural curriculum; blended learning; collaborative design; VDS
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2011_099
id	ecaade2011_099
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Methodological Approach for the Integration of Material Information and Performance in the Design Computation for Tension-Active Architectural Systems
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.799-808
doi	https://doi.org/10.52842/conf.ecaade.2011.799
wos	WOS:000335665500092
summary	As computational design processes have moved from representation to simulation, the focus has shifted towards advanced integration of performance as a form defining measure. Performance, though, is often assessed purely on the level of geometry and stratified between hierarchically independent layers. When looking at tension-active membrane systems, performance is integrated across multiple levels and with only the membrane material itself, defining the structural, spatial and atmospheric qualities. The research described in this paper investigates the integrative nature of this type of lightweight structure and proposes methodologies for generating highly articulated and differentiated systems. As material is a critical component, the research focuses on a system-based approach which places priority on the inclusion of material research and parameterization into a behavior-based computational process.
keywords	Material behavior; material computation; system; gestalt; tension-active system
series	eCAADe
email
last changed	2022/05/01 23:21

_id	acadia11_82
id	acadia11_82
authors	Ahlquist, Sean; Menges, Achim
year	2011
title	Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
doi	https://doi.org/10.52842/conf.acadia.2011.082
summary	With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2012.047
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2011_117
id	ecaade2011_117
authors	Albayrak, Canan; Tunçer, Bige
year	2011
title	Performative architecture as a guideline for transformation: Defense Line of Amsterdam
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.501-510
doi	https://doi.org/10.52842/conf.ecaade.2011.501
wos	WOS:000335665500058
summary	Performance as an architectural design paradigm has been emerging during the recent years. We have developed an understanding that we formalized as a taxonomy for performative architecture that considers performance from three points of view: health, safety and security performance; functional and efficiency performance; and psychological, social, cultural, and esthetic performance. This paper focuses on a design project that explores these ideas as a performative architecture proposal. The project focuses on the architectural transformation of the Defense Line of Amsterdam, 41 forts, as a green belt. This transformation considers a holistic approach of defining a general method and guideline. We developed a series of parametric models for the definition and generation of designs. The first model computes an urbanization level for each fort. Consequently, models are developed in 4 stages: regional design, urban design, building design, and production of a scale model, and these are applied in an iterative manner to reach design outcomes for the project.
keywords	Performative architecture; performance evaluation; taxonomy; parametric modeling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	10cc
id	10cc
authors	Alves, Gilfranco; Nojimoto, Cynthia
year	2011
title	Strings Pavilion: design process
source	V!RUS, [online] n. 6. [online] Available at: . [Accessed: 30 December 2011].
summary	The paper presents the design process of Strings Pavilion developed during the Architectural Association School of Architecture's Visiting School Workshop occurred in Sao Paulo city, in July, 2011. The pavilion is an outcome from a collective creation process of five persons team working in an immersive way during ten days; they explored several possibilities of experimentation and hybrid processes from researches about materials features and behaviors as well as parametric software. Fundamental concepts such as loop, feedback and responsivity from Second Order Cybernetic and Systems Theory were included and applied in the creation process.
keywords	design processes; Second Order Cybernetic; Complex Systems, parametric design; digital fabrication; interactivity.
series	other
type	normal paper
email
more	http://www.nomads.usp.br/virus/virus06/?sec=6&item=2&lang=en
last changed	2012/01/09 07:27

_id	sigradi2011_084
id	sigradi2011_084
authors	Alves, Gilfranco; Pratschke, Anja
year	2011
title	Mediação digital e revisão dos processos de design em Arquitetura [Digital mediation and review of design processes in Architecture]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 35-38
summary	This paper presents partial results of doctoral research entitled Architecture, Semiotics and Second Order Cybernetics: observation, representation and performance in design process. The research is linked to the Nomads.usp research group and proposes a review of design process, considering the mediation of digital media by using concepts of Second order Cybernetics. This work start with the hypothesis that in a contemporary context, professional demands of architects and designers requires a different approach in relation to the concept of emergence in architecture, and also describes an experiment during the AA Visiting School SP 2011, the Strings / Supple Pavilion project.
keywords	Design processes; digital media; emergence; performance.; Second-order Cybernetics
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: