Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 549

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
doi	https://doi.org/10.52842/conf.acadia.2012.391
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	ascaad2012_008
id	ascaad2012_008
authors	Ambrose, Michael A. and Kristen M. Fry
year	2012
title	Re:Thinking BIM in the Design Studio - Beyond Tools… Approaching Ways of Thinking
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 71-80
summary	The application of digital design methods and technologies related to BIM and Integrated Practice Delivery are altering the how and what of architectural design. The way contemporary architecture is conceived and made is being transformed through the digital methods, processes and applications used in BIM. How architectural education and the design studio model evolve to reflect, interpret, translate, or challenge the multiplicitous and simultaneously variable modes of contemporary practice present opportunity and risk to this generation of digital scholars, educators and practitioners. Might we re-conceive the design studio as a venue in which a critical dialogue about how the many facets of architectural design practice are engaged? The possibilities afforded by BIM and Integrated Practice Delivery and digital design technologies are increasingly affecting what we make and simultaneously how we make as architects. Digital modeling of both geometry and information is replacing (or displacing) digital drawing. We see diminishing returns of the value of transforming three-dimensional spatial/formal ideas into two-dimensional conventional abstractions of those complex ideas. This comprehensive thinking promoted by BIM processes is one of the key advantages of using BIM leading to true design innovation. The reiterative learning process of design promoted in BIM promotes a rethinking of design studio education.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_008.pdf
last changed	2012/05/15 20:46

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
doi	https://doi.org/10.52842/conf.caadria.2012.305
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
wos	WOS:000330320600014
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
doi	https://doi.org/10.52842/conf.acadia.2012.199
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_511
id	acadia12_511
authors	Borowski, Darrick ; Poulimeni, Nikoletta ; Janssen, Jeroen
year	2012
title	Edible Infrastructures: Emergent Organizational Patterns for the Productive City
doi	https://doi.org/10.52842/conf.acadia.2012.511
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 511-526
summary	Edible Infrastructures is an investigation into a projective mode of urbanism which considers food as an integral part of a city's metabolic infrastructure. Working with algorithms as design tools, we explore the generative potential of such a system to create an urban ecology that: provides for its residents via local, multi-scalar, distributed food production, reconnects urbanites with their food sources, and de-couples food costs from fossil fuels by limiting transportation at all levels, from source to table. The research is conducted through the building up of a sequence of algorithms, beginning with the ‘Settlement Simulation’, which couples consumers to productive surface area within a cellular automata type computational model. Topological analysis informs generative operations, as each stage builds on the output of the last. In this way we explore the hierarchical components for a new Productive City, including: the structure and programming of the urban circulatory network, an emergent urban morphology based around productive urban blocks, and opportunities for new architectural typologies. The resulting prototypical Productive City questions the underlying mechanisms that shape modern urban space and demonstrates the architectural potential of mathematical modeling and simulation in addressing complex urban spatial and programmatic challenges.
keywords	Urban Agriculture , Urban Ecologies and Food Systems , Productive Cities , Urban Metabolism , Computational Modeling and Simulation , Algorithmic/ Procedural Design Methodologies , Emergent Organization , Self-Organizing Systems
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_314
id	ecaade2012_314
authors	Bourdakis, Vassilis; Pentazou, Ioulia
year	2012
title	Real City Museum/Virtual City Model: Real Datasets/Virtual Interactions
doi	https://doi.org/10.52842/conf.ecaade.2012.2.337
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 337-341
summary	Creating virtual city models at different scales, emphases and overall orientations is a topic that has attracted great interest in architectural and urban planning context over at least the last two decades. However the complexity of the city as a historical formation demands new methods of representation embracing interactive technologies. The work discussed in this paper is part of a large multidisciplinary project for the development of the Volos city museum. Enhancing the interaction between the public and the museum exhibits is essential. The paper focuses on the definition, complexity and orientation of the data structures and the integration of 3D contemporary and historic data that is the backbone for the digital representations and the interactive applications developed for the museum.
wos	WOS:000330320600034
keywords	Database design; XML; Dublin Core metadata; history; 3D modelling; geo-referencing
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_127
id	ecaade2012_127
authors	Burry, Jane; Goscinski, Wojec; Aranda-Mena, Guillermo; Alhadidi, Suleiman; Pena de Leon, Alex; Williams, Mani
year	2012
title	Trade Off and Real Time Analysis Feedback for Designers: Sailing as a Research Vehicle for Developing Systems and Skills
doi	https://doi.org/10.52842/conf.ecaade.2012.2.543
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 543-550
summary	This paper describes the investigation and outcomes of a workshop aiming to answer the dual questions of how best to link technologies and how best to harness expert knowledge to capture and integrate dynamic performance feedback in the design process. In order to focus on these intrinsic questions, the workshop moved outside the domain most familiar to most of the participants, the built environment, and introduced the participants to design and performance feedback for what, to most, was the new domain of sailing and sail design. It resulted in novel and valuable prototypical systems for analysis and feedback to inform immediate design iteration. It achieved this through problem decomposition and synthetic design activity engaging integrated models and prototypes with components from multiple players and sources of informed or expert knowledge or knowing.
wos	WOS:000330320600057
keywords	Design feedback; nested systems; sailing; interaction design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_273
id	ecaade2012_273
authors	Correia, Rodrigo ; Duarte, José ; Leitao, António
year	2012
title	GRAMATICA: A general 3D shape grammar interpreter targeting the mass customization of housing
doi	https://doi.org/10.52842/conf.ecaade.2012.1.489
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 489-496
summary	This paper presents a general 3D shape grammar interpreter named GRAMATICA and illustrates its use for the implementation of several shape grammars, including the one used in the design module of a specifi c shape grammar for mass-customized housing, called DESIGNA. The underlying shape representation, generation and control are discussed. The resulting shape grammar interpreter tries to support designers’ ways of thinking and working by acting as a bridge between shape grammars, the formalism that captures a design process, and a CAD application, for post-processing the computed design. This bridge is implemented by Rosetta, which ensures portability among different CAD applications.
wos	WOS:000330322400050
keywords	Grammar interpreters; mass customization; housing; Malagueira; Siza
series	eCAADe
email
last changed	2022/06/07 07:56

_id	c4bd
id	c4bd
authors	Derix C, Gamlesæter A, Miranda P, Helme L and Kropf K
year	2012
title	Simulation Heuristics for Urban Design
source	In Mueller Arisona et al (eds), Digital Urban Modelling and Simulation: Communications in Computer and Information Science, Springer, Heidelberg, 2012
summary	Designing simulations for urban design not only requires explicit performance criteria of planning standards but a synthesis of implicit design objectives, that we will call ‘purpose rules’, with computational approaches. The former would at most lead to automation of the existing planning processes for speed and evaluation, the latter to an understanding of perceived urban qualities and their effect on the planning of cities. In order to transform purpose rules into encoded principles we argue that the focus should not be on defining parametric constraints and quantities, but on aligning the perceptual properties of the simulations with the strategies of the stakeholders (planner/ urban designer/ architect/ developer/ community). Using projects from the Computational Design and Research group at Aedas [CDR] as examples, this chapter will discuss how an open framework of lightweight applications with simple functionality can be integrated into the design and planning process by using computational simulations as urban design heuristics.
keywords	urban design, design heuristics, meta-heuristics, simulation, algorithm visualization
series	book
type	normal paper
email
more	http://www.springerlink.com/content/g58114676q4228h8/?MUD=MP
last changed	2012/09/20 14:17

_id	b92c
id	b92c
authors	Derix, Christian
year	2012
title	Digital Masterplanning: Computing Urban Design
source	In Urban Design and Planning: Institution of Civil Engineers, Thomas Telford Publishers, ahead-of-print
summary	The digital revolution has finally reached urban design as one of the last design communities not very familiar with computing. This is despite the city and geography being the natural fields for systems analogy and digital models of mathematical and statistical simulation were developed in the 60s and 70s for urban planning, much before industrial or architectural design. The recent arrival of urban design simulations is however not as innovative and radical as their 50 year old counterparts since they use computing solely for policy visualization, quantity evaluation or pattern generation. The Computational Design and Research Group [CDR] at Aedas\|R&D started in 2007 to develop an open platform of lightweight applications – Digital Masterplanning – in collaboration with partners from academia and industry to provide methods for urban design, based on computational methods called meta-heuristic algorithms. An attempt to encode empirical knowledge and design assumptions into simulations is described where designers can assemble the resulting applications according to scales and brief into custom workflows.
keywords	Spatial Planning, Urban Design, Meta-Heuristic Algorithms, Computational Design
series	journal paper
type	normal paper
email
more	http://www.icevirtuallibrary.com/content/article/10.1680/udap.9.00041
last changed	2012/09/20 17:41

_id	acadia12_295
id	acadia12_295
authors	Dierichs, Karola ; Menges, Achim
year	2012
title	Functionally Graded Aggregate Structures: Digital Additive Manufacturing With Designed Granulates
doi	https://doi.org/10.52842/conf.acadia.2012.295
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 295-304
summary	In recent years, loose granulates have come to be investigated as architectural systems in their own right. They are defined as large numbers of elements in loose contact, which continuously reconfigure into variant stable states. In nature they are observed in systems like sand or snow. In architecture, however, they were previously known only from rare vernacular examples and geoengineering projects, and are only now being researched for their innate material potentials. Their relevance for architecture lies in being entirely reconfigurable and in allowing for structures that are functionally graded on a macro level. Hence they are a very relevant yet unexplored field within architectural design. The research presented here is focused on the potential of working with designed granulates, which are aggregates where the individual particles are designed to accomplish a specific architectural effect. Combining these with the use of a computer-controlled emitter-head, the process of pouring these aggregate structures can function as an alternative form of 3D printing or digital additive manufacturing, which allows both for instant solidification, consequent reconfiguration, and graded material properties. In its first part, the paper introduces the field of research into aggregate architectures. In its second part, the focus is laid on designed aggregates, and an analytical design tool for the individual grains is discussed. The third part presents research conducted into the process of additive manufacturing with designed granulates. To conclude, further areas of investigation are outlined especially with regard to the development of the additive manufacturing of functionally graded architectural structures. The potentials of the methodologies developed in this process are shown through the fabrication of a full-scale installation. By integrating material, fabrication, and design constraints into a streamlined computational methodology, the process also serves as a model for a more intuitive production workflow, expanding the understanding of glass as a material with wide-ranging possibilities for a more performative architecture.
keywords	Aggregate Architectures , Digital Additive Manufacturing , Functionally Graded Materials
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2012_029
id	caadria2012_029
authors	Dutt, Florina and Subhajit Dasd
year	2012
title	Responsive achitectural surface design from nonlinear systems biology: Responsive architectural design by computational methods
doi	https://doi.org/10.52842/conf.caadria.2012.465
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 465–474
summary	The fundamental processes in living systems can be a potential resource to derive nonlinear relationships that could find application in the design of responsive surface from an architectural standpoint. This research focuses on deriving a parametric relationship from a phenomenon in cell biology to generate an architectural expression of responsive surface/ façade. It further delineates the dynamic feedback mechanism from the environment and user as control factors. Through extensive investigation of cell-to-cell connections in the mammary epithelial cells and review of evident relay of communication across the entire system of cells, we could unfold the logical parameters of the biological system. Parametric modelling indicating the causality of the surface condition, changes with the change in extracellular matrix. This gives an opportunity to manoeuvre the surface parameters, contrary to the involuntary cell environment where the behaviours are under the control of a physiological process. Architecturally, the dynamic relationship of surface in a hybridised model, explains that interactivity is not a mere one to one response to a stimulus. Evidently, this interactive process can be a sophisticated loop of feedback through different materiality and componentry that play their effects (and are played back) by “active” surfaces.
keywords	Computational design; responsive architecture; sustainable façade design; bio-inspired design; bio-mimicry
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2012_130
id	sigradi2012_130
authors	Dutt, Florina; Das, Subhajit
year	2012
title	Designing Eco Adaptable Residence in a Hot & Humid Climate, in Kolkata, India
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 509-512
summary	The research paper outlines the novel design methodology undertaken to redesign an existing apartment building in Kolkata India. The aim of the research is to significantly improve the design of the individual apartments as well as their spatial arrangement to enhance the indoor comfort level experienced by the inhabitants. The initial in-depth study of the existing design of the apartment building encompasses a short survey of the comfort level experienced by its inhabitants in terms of day lighting, natural ventilation and thermal comfort. The survey revealed the way in which these issues affected the behavioral pattern of the inhabitants in rearranging their spatial needs for the given design conditions. Consequently, the endeavor proposed promised to significantly improve the aforesaid areas of problem & discomfort for the building occupants. At the same time, exploiting contemporary computational simulation tools and digital three-dimensional modeling techniques the project leverages the same to prove the improvements proposed by research data in the form of scientific & mathematical tables and values.
keywords	Sustainable Design; Solar Architecture; Wind Tunnel Test; Eco Adaptable Housing
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	sigradi2012_263
id	sigradi2012_263
authors	Espina, Jane
year	2012
title	Procesos, Metodología y Prácticas en Urbanismo: flujo continuo de datos e información en sectores urbanos de la ciudad [Processes, and Practices Methodology Urbanism: continuous flow of data and information in city’s urban areas]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 294-298
summary	Technology provides new digital tools for the benefit of the Planning and Urban Design. The goal of this paper is to show a methodology for the interpretation and analysis of the urban site in the city of Maracaibo, Venezuela; and its implementation as academic experience in the Department of Urban Planning. The use of digital and communication technologies in teaching strategies and instructional resources, achieved profits in the teaching-learning process, optimized collection processes, organization and flow of data and information, understanding of the urban fact. Tools used: mobile telephony, internet, browsers, applications, improving communication between students, student-teacher, student-teacher-community.
keywords	Work Methodology; Planning; Urban Areas; Digital Technology; Interpretation and Site Analysis
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	caadria2012_098
id	caadria2012_098
authors	Fok, Wendy W.
year	2012
title	Cross pollination of ideas: Design fabrication and experimentation
doi	https://doi.org/10.52842/conf.caadria.2012.589
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 589–598
summary	The following pages show a selection of studio projects which explore the opportunistic collaborative process between commercial fabricators, material sponsorships, and the institution. The articles speaks about the intersection of design experimentation and significance of fabrication within the contained process of [design \| optimisation \| fabrication]. Within this process the article intersects between practice, commercialisation, and design-research, into the development arena of architectural academic outcomes. The demonstrating fact within much of the research and development also touches upon intricate details of modularity, and designing with optimisation in mind for the purpose (and ease) of fabrication, prototyping, and ‘real-life’ production. While the focus of the academic studios deliberates and uses parametric design systems through digital and analogue modelling to contribute to a full scale designed installation, and actively working with a commercial fabricator and material sponsor (Luxx Newhouse & LG Hausys HI-MACS). The aim of the courses were to acquaint students with theoretical and practical conditions needed for the creating of experimental relational modularity between geometry, scale, and materials as well as the ability to negotiate between quick intuitive studies and definitive quantifiable decisions.
keywords	Design fabrication; material investigation; industry collaboration; architecture; industrial design
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201210106
id	ijac201210106
authors	Henriques, Goncalo Castro
year	2012
title	TetraScript: A Responsive Pavilion, From Generative Design to Automation
source	International Journal of Architectural Computing vol. 10 - no. 1, 87-104
summary	This research is part of a broader investigation into the use of digital technologies in the Architecture, Engineering and Construction (AEC) sector. The intention is to improve the ability of buildings to respond to context by proposing a skylight system that can adjust to external environmental conditions and internal functional demands. We call this responsive ability customisation. The proposed skylight system can adapt to different geometries, uses, locations, times of day and other contextual conditions. Customisation can be achieved by static and dynamic processes. Static customisation is achieved during the design process by selecting the form and size of the building, as well as the number, arrangement and size of the skylights, among other features. Dynamic customisation is accomplished after construction by changing the skylight aperture in real-time to control interior conditions. This paper focuses on the static process to find an adequate skylight configuration for a case-study pavilion.
series	journal
last changed	2019/07/30 10:55

_id	caadria2012_045
id	caadria2012_045
authors	Khoo, C. K. and F. D. Salim
year	2012
title	A responsive morphing media skin
doi	https://doi.org/10.52842/conf.caadria.2012.517
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 517–526
summary	Existing media façades do not function as fenestration devices. They have been used mainly for visual communication and aesthetic purposes. This paper introduces a responsive morphing skin that can act as an active fenestration device as well as a media skin. We investigate new possibilities of using form-changing materials in designing responsive morphing skins that respond to environmental conditions and act as a communicative display. The design experiment that embodied this investigation, namely Blind, serves as a new layer of analogue media brise-soleil for existing space. It communicates the relationships between interior and exterior spaces visually and projects mutable imageries to the surrounding environment through sunlight. The design process of Blind simulates the responsive behaviour of the intended architectural skin by integrating physical computing and parametric design tools. This process includes the integration of soft apertures and architectural morphing skin to introduce a novel design method that enables an architectural skin to be a means of communication and fenestration. It responds to changing stimuli and intends to improve the spatial quality of existing environments through two types of transformations: morphological and patterned.
keywords	Media façades; elasticity; responsive architecture; formchanging materials; kinetic skin
series	CAADRIA
email
last changed	2022/06/07 07:52

For more results click below: