Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2012_317
id	ecaade2012_317
authors	Boeykens, Stefan ; Himpe, Caroline ; Martens, Bob
year	2012
title	A Case Study of Using BIM in Historical Reconstruction: The Vinohrady synagogue in Prague
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 729-737.
doi	https://doi.org/10.52842/conf.ecaade.2012.1.729
wos	WOS:000330322400077
summary	This article refl ects on the digital reconstruction of the Vinohrady Synagogue in Prague, which was demolished in 1951. Based on an international collaboration through the Erasmus program, expertise derived from other Viennese synagogue reconstructions at TU Vienna was combined with a resource organization methodology developed at KU Leuven. The reconstruction process is carried out using BIM software, which poses some particular attention on the software methodology and model structure, but at the same time illustrates the added value of a BIM approach, when comparing with more traditional CAD modelling systematics. Of particular interest is the approach for modelling complex geometry, integrating with more traditional 2D documents and for visualizing reconstruction assumptions within the 3D model representation.
keywords	Virtual reconstruction; destroyed synagogue; 3D-modeling; BIM; urban context
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2012_257
id	ecaade2012_257
authors	Fischer, Jan-Ruben
year	2012
title	Optimizing Digital Organic Freeform Modelling for Fabrication by Using Parameterization With Glass Fibre Reinforced Plastics (GRP): A Case Study
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 191-200
doi	https://doi.org/10.52842/conf.ecaade.2012.2.191
wos	WOS:000330320600019
summary	In the fabrication of organic free-form shapes in architecture one is constantly faced with specifi c planning and design challenges. This paper examines these problems as well as possible solutions for the design of a completed and built prototype using the example of an organically shaped pavilion made of glass fi bre reinforced plastic modules. The paper describes which adjustments to the original design were required to take the step from “digital physicality” to “physical digitality” to realize a constructive and economically successful implementation. The solutions discussed combine modern digital software methods such as parametric design with innovative 3D modelling principles.
keywords	Digital fabrication; freeform modelling; parametric design; bionic, GRP
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2017_077
id	sigradi2017_077
authors	Soto Muñoz, Jaime; Jesús Pulido Arcas, Rodrigo García Alvarado, Gastón Arias Aravena
year	2017
title	La implementación de la Metodología Building Information Modeling (BIM) para edificios existentes en Chile [La implementación de la Metodología Building Information Modeling (BIM) para edificios existentes en Chile]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.528-533
summary	BIM technology is currently being implemented in the construction industry, though it is still underdeveloped in relation to Facility Management (FC) of extant buildings. There is a strong potential for future development due to the visualization and data analysis capabilities of this technology, amongst others (Becerik-Gerber, Jazizadeh, Li, & Calis, 2012). This research investigates how BIM can be implemented in existing buildings currently in operation. Using a public facility at the University of Bio-Bio as a case study, conclusions are drawn with respect the capabilities of BIM in order to optimize maintenance and operation of existing buildings.
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ijac201210203
id	ijac201210203
authors	Abdelhameed, Wael A.
year	2012
title	Micro-Simulation Function to Display Textual Data in Virtual Reality
source	International Journal of Architectural Computing vol. 10 - no. 2, 205-218
summary	Virtual reality creates an effective communication platform with a high degree of perception and exploration, increasing the benefits of VR applied functions.This research paper reports a virtual reality function of using the micro-simulation editor-player with XML file in the virtual reality environment.The details of the function are presented.The function aiming at combining visual and textual data in VR model visualisation, was developed by the researcher, and was included in the micro-simulation plug-in of a virtual reality program,VR Studio version 6, previously known as UC-Win/Road, by the program developers.The research paper discusses the computer simulation techniques and uses in virtual reality in general.The research paper proceeds to introduce a case study of construction process visualization in the virtual reality environment, in which the newly developed function is utilized to simultaneously visualise data reports related to the stages of VR model visualisation.The concluding remarks accentuate this micro-simulation function with its potential uses in different fields.
keywords	Micro-Simulation, XML,Virtual Reality, Construction Process Visualisation
series	journal
last changed	2019/05/24 09:55

_id	ascaad2012_007
id	ascaad2012_007
authors	Abdelsalam, Mai M.
year	2012
title	The Use of Smart Geometry in Islamic Patterns - Case Study: Mamluk Mosques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 49-68
summary	It is noted that architects need new and quick methods designing the historic architectural styles, as well as restoring the historical urban areas particularly the Islamic ones. These designs and restorations should adapt to the basics of the Islamic style used; general concept, module and features. Smart Geometry provides advanced design concepts and increases alternative variations. Parametric design softwares also add more rules and relations on the design process. Obviously, the Islamic module and proportions are used as design generators that result in extracting a number of alternatives easily in a little time. Generative Components (GC) is the parametric software used to achieve the desired objectives of this research.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_007.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_282
id	ecaade2012_282
authors	Andrade, Max ; Mendes, Leticia ; Godoi, Giovana ; Celani, Gabriela
year	2012
title	Shape grammars for analyzing social housing: The case of Jardim São Francisco low-income housing development
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 451-458
doi	https://doi.org/10.52842/conf.ecaade.2012.1.451
wos	WOS:000330322400046
summary	This paper presents an analysis of Jardim São Francisco, a lowincome housing development in São Paulo, Brazil, using shape grammar as an analytical method. It is part of an ongoing research that aims at analyzing the different types of sitting in low-income housing developments and their consequences for public spaces. The fi nal objective is to propose a design method that allows designing better quality urban spaces in this type of development.
keywords	Low-income housing; urban design; shape grammar
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_243
id	ecaade2012_243
authors	Araya, Sergio; Zolotovsky, Ekaterina; Gidekel, Manuel
year	2012
title	Living Architecture: Micro Performances of Bio Fabrication
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 447-457
doi	https://doi.org/10.52842/conf.ecaade.2012.2.447
wos	WOS:000330320600047
summary	This ongoing research study explores novel modes of design and fabrication by combining digital tools and technologies with living biological systems within controlled environments in order to induce specifi c biological functions and material production processes. The main objective is to design and implement a biological fabrication technique, using bacteria, to produce physical components for architecture and product design.
keywords	Synthetic Biology; Architecture; Design; Biofabrication; Biomaterial
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_39
id	ecaade2012_39
authors	Asanowicz, Aleksander
year	2012
title	Design: Analogue, Digital, and Somewhere in Between
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 273-280
doi	https://doi.org/10.52842/conf.ecaade.2012.2.273
wos	WOS:000330320600027
summary	The problem considered in this paper is: “In what way do we design?” This paper concentrates on the early creative stages of the design process during which the designer gradually gathers the information about the problem, applying appropriate rules, tools and media. If the tools are chosen as a starting point of consideration, designing may be analysed as manual or digital. If we chose the medium - design may be considered as physical or virtual. The main thesis of this paper is that designing proceeds somewhere in between. “Somewhere in between” means the space where manual, digital, virtual are mixing, overlapping, and transforming one into the other. As a case study the process of designing of blurred function object is presented. In this experimental design studio we paid particular attention to the design process and we searched for the answer to the following questions: how to find an idea (what tools/media are helpful), how to express, fi x and transform that idea? In the paper the examples of students’ work will be presented and discussed.
keywords	Creativity; digital design methods; mixed methods of design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_247
id	ecaade2012_247
authors	Balaban, Özgün; Kilimci, Elif Sezen Yagmur; Cagdas, Gülen
year	2012
title	Automated Code Compliance Checking Model for Fire Egress Codes
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 117-125
doi	https://doi.org/10.52842/conf.ecaade.2012.2.117
wos	WOS:000330320600011
summary	Architecture today has come to its most complex form. There are lots of criteria such as fi re safety, structure, sustainability etc… which must be controlled by the designers. To improve the performance and accessibility of buildings, governing bodies publish different codes for each of the different criteria. Buildings must comply with these codes to get a permit for construction. The checking of the buildings according the codes is done manually by code offi cials. This process is time consuming, high in cost and prone to errors. To remedy this problem by using the tools like BIM and AI, systems that can automatically check the code compliance of projects are being developed. In this paper we provide an overview of the structures and capabilities of these systems and present the automated code compliance checking system that we develop for checking building models against some parts of the Turkish Fire Codes.
keywords	Automated Code Compliance Checking; Fire Codes; BIM
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2012_019
id	ascaad2012_019
authors	Blibli, Mustapha; Ammar Bouchair and Faouzi Hannouf
year	2012
title	Three Dimensional Reconstitution of an Old Town from Historical Documents: Case of the Medina of Jijel in Algeria
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 191; 285-303
summary	The three-dimensional reconstitution of cities and urban tissues was the subject of several studies and researches. In order to obtain the acquisition of the geometry of architectural or urban sets, some studies are based on Photogrammetric or on computer vision. Others have focused on the development of tools of acquisition from a laser providing a 3D scatter plot. Some of them yet focused towards the development of CAD software. The automatic generation for morphological 3D representation based on the exploitation of the architectural knowledge basis is also an option. This type of work becomes more relevant and legitimate when it concerns old cities in state of ruin or more simply missing whose remains only prints or literary descriptions similar to our case study; the old town of Jijel that many people ignore its existence. The aim of this work is to achieve a 3D reconstitution of buildings of this town based on historical documents, mostly prints, digitized old maps and plans, as well as literary texts (tales of travelers, military records, and history books). The method developed can solve and generate possible urban volumes in the most frequent cases. The 3D model obtained, despite its geometric simplicity, can view the city from different angles and open new opportunities for research in history, architecture and town planning.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_019.pdf
last changed	2012/05/15 20:46

_id	caadria2019_204
id	caadria2019_204
authors	Calixto, Victor, Gu, Ning and Celani, Gabriela
year	2019
title	A Critical Framework of Smart Cities Development
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 685-694
doi	https://doi.org/10.52842/conf.caadria.2019.2.685
summary	This paper investigates through a review of the current literature on smart cities, reflecting different concepts across different political-social contexts, seeking to contribute to the establishment of a critical framework for smart cities development. The present work provides a review of the literature of 250 selected publications from four databases (Scielo, ScienceDirect, worldwide science, and Cumincad), covering the years from 2012 to 2018. Publications were categorised by the following steps: 3RC framework proposed by Kummitha and Crutzen (2017), the main political sectors of city planning, implementation strategies, computational techniques, and organisation rules. The information was analised graphically trying to identify tendencies along the time, and also, seeking to explore future possibilities for implementations in different political-social contexts. As a case of study, Australia and Brazil were compared using the proposed framework.
keywords	smart city; smart cities; literature review
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_223
id	ecaade2012_223
authors	Chien, Sheng-Fen ; Yeh, Yee-Tai
year	2012
title	On Creativity and Parametric Design: A preliminary study of designer’s behaviour when employing parametric design tools
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-253
doi	https://doi.org/10.52842/conf.ecaade.2012.1.245
wos	WOS:000330322400024
summary	This research explores the relationship between unexpected outcomes generated through parametric design tools and the design creative process. We conducted an empirical study to observe how designers behave while encountering unexpected outcomes using parametric design tools as well as other kinds of design tools. From our study, there are some indications that the space of possible design solutions of the participants was expanded with the existence of unexpected outcomes. The preliminary result is encouraging. Further studies may need to address experience designers and novice designers separately.
keywords	Parametric design; unexpected outcome; creativity; protocol analysis
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2012_080
id	caadria2012_080
authors	Dounas, Theodoros
year	2012
title	Tactics of interactivity in Virtual Reality: Learning from 3d game tools
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 223–232
doi	https://doi.org/10.52842/conf.caadria.2012.223
summary	The present paper tries to explore the potential of visual-heavy tools in the creation of virtual reality worlds, with an emphasis on tools borrowed from 3d electronic games. Compared to earlier approaches in virtual reality creation the paper focuses on game design tools and provides a basic framework for interaction in virtual reality, based on classic rather than digital representations, which is then expanded using digital representations. In the second part of the paper a game creation tool is assessed based on its potential not only of usability but also on guiding the designer in specific paths to designing virtual worlds. The assessment is based on a case study of interaction design.
keywords	Virtual reality; 3d game design; open source
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2012_197
id	ecaade2012_197
authors	ElBanhawy, Eiman Y. ; Dalton, Ruth ; Thompson, Emine Mine ; Kottor, Richard
year	2012
title	Real-Time Electric Mobility Simulation in Metropolitan Areas. A case study: Newcastle-Gateshead
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 533-546
doi	https://doi.org/10.52842/conf.ecaade.2012.1.533
wos	WOS:000330322400055
summary	This paper discusses the potential of emerging digital representations of built environments coupled with agent-based modelling (ABM). A new set of urban transportation data is provided as an input which is the electric vehicles (EVs) population of one of the UK metropolitan areas. The study is a part of a PhD research that focuses on investigating computer-aided software to develop a virtual route for electric mobility in the North Sea Region. An overview of agent-based simulation platforms is discussed. Electric mobility system has particular paradigms that differ from conventional urban transport systems; a comparison is presented followed by the recommended approach of integrating the two techniques (visualization and simulation). Finally, the architecture of agents’ algorithm within the EVs network is presented through a case study of virtual Newcastle-Gateshead model.
keywords	E-mobility; electric vehicles; simulation; agent based modelling; virtual city models
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2012_207
id	ecaade2012_207
authors	Felasari, Sushardjanti ; Peng, Chengzhi
year	2012
title	Supporting Urban Design Learning with Collective Memory Enhanced Virtual City: The Virtual Jalan Malioboro Experiment
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 195-202
doi	https://doi.org/10.52842/conf.ecaade.2012.1.195
wos	WOS:000330322400019
summary	The paper reports on the observation of how students can be supported in urban design learning through the use of an experimental collective memory enhanced virtual city - Virtual Jalan Malioboro. This study focuses on how instances of people’s collective memory of the Malioboro Street could be digitally represented and connected with the 3D models of buildings and places of the street. An evaluative study was conducted in a real university educational setting to test how it can support urban design learning. The results show that by enhancing 3D models with collective memory, students are facilitated to become more engaged with the urban site and knowledgeable of historical contextual issues.
keywords	Urban design; virtual learning environment; collective memory
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2012_042
id	caadria2012_042
authors	Globa, Anastasia and Michael Donn
year	2012
title	Digital to physical: Comparative evaluation of three main CNC fabrication technologies adopted for physical modelling in architecture
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 327–336
doi	https://doi.org/10.52842/conf.caadria.2012.327
summary	Recently, digital fabrication, being a logical extension of computer-aided technology to the material world, was introduced into the field of computational design in architecture. The objective of this experimental study is to investigate and systematise data regarding the production issues and limitations of the main Computer Numerically Controlled (CNC) fabrication technologies adopted for physical modelling in architecture. This study also aims to observe the value of potential feedback to the design process from different types of digitally fabricated architectural models. This experimental research systematically explores digital fabrication as a computer-aided modelling tool, using two international architectural competition projects as case studies: the design of a skyscraper and relocatable schools. Developed by authors especially for this research paper, each case study acts as a test bed to compare and evaluate digital production techniques adopted for physical modelling in architecture. Designs go through a process of refinement using CNC fabrication as an integral part of the design process. Each step in the process is closely evaluated as to its effectiveness according to a matrix of feedback criteria.
keywords	Design process; digital fabrication; architectural model
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201210401
id	ijac201210401
authors	Globa, Anastasia; Michael Donn, Simon Twose
year	2012
title	Digital To Physical: Comparative Evaluation Of Three Main CNC Fabrication Technologies Adopted For Physical Modelling In Architecture
source	International Journal of Architectural Computing vol. 10 - no. 4, 461-480
summary	The objective of this experimental study is to investigate and systematise data regarding the production issues and limitations of Computer Numerically Controlled fabrication technologies typically adopted for physical modelling in architecture.This study also aims to observe the value of potential feedback to the design process from different types of digitally fabricated architectural models.This experimental research systematically explores digital fabrication as a computer-aided modelling tool using two international architectural competition projects as case studies: the design of a skyscraper and relocatable schools. Developed by the authors especially for this research paper, each case study acts as a test bed to compare and evaluate digital production techniques adopted for physical modelling in architecture. Designs go through a process of refinement using CNC fabrication as an integral part of the design process. Each step in the process is closely evaluated as to its effectiveness according to a matrix of feedback criteria.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_278
id	ecaade2012_278
authors	Gu, Ning ; de Vries, Bauke
year	2012
title	Two Approaches to Implementing BIM in Architectural Curricula
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 39-48
doi	https://doi.org/10.52842/conf.ecaade.2012.1.039
wos	WOS:000330322400003
summary	BIM is an IT-enabled approach that supports enhanced design integrity, efficiency and quality through the distributed access, exchange and maintenance of building data (Haymaker and Suter, 2007; Fischer and Kunz, 2004). More recently, many universities have responded to the adoption of BIM in the profession, by gradually introducing the practice into the curricula (i.e. Cory and Schmelter-Morret, 2012; Ibrahim, 2007; Plume and Mitchell, 2007). Focusing on collaboration – one of the most important aspects of BIM, this paper presents two approaches to implementing BIM in architectural curricula with a focus on collaboration but from two different collaboration scales. Through observation and refl ection of these two approaches to teaching BIM, the paper concludes by discussing BIM curriculum design.
keywords	Building Information Modelling (BIM); curriculum design; case studies
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2012_48
id	ecaade2012_48
authors	Hanna, Raid
year	2012
title	Computer Aided Cognition and Creativity: A Three Year Monitoring Exercise
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 233-243
doi	https://doi.org/10.52842/conf.ecaade.2012.2.233
wos	WOS:000330320600023
summary	This paper tracked the progress of 24 students who were ‘intensive’ users of CAD and 26 ‘occasional’ CAD users over a 3 year period. At the end of each year, student attitudes toward creativity dimensions were monitored, using questionnaires and semi-structured interviews. The collected data was analyzed with the Statistical Package for Social Sciences (SPSS). The statistical tests displayed a signifi cant difference between both groups in terms of ideation fl uency and ideation fl exibility (P<0.05). Within the intensive CAD group the tests also yielded signifi cant differences between years (P<0.05). Ideation fl uency correlated positively with years of study and was infl uenced by CAD and design maturity both as a ‘main effect’ and as an ‘interaction’. The cognitive preference for complexity as a design trait in the intensive group also correlated with the increased complexity of the digital tools used; preference for low complexity correlated with the use of direct CAD tools whereas higher levels of complexity correlated with the deployment of parametric and generative tools.
keywords	Creativity; ideation; CAD; repeated measures; statistics
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2012_185
id	ecaade2012_185
authors	Hemmerling, Marco; Lemberski, David
year	2012
title	Sparkler: The Vitruvian Man vs. Buckminster Fuller
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 127-132
doi	https://doi.org/10.52842/conf.ecaade.2012.2.127
wos	WOS:000330320600012
summary	Every production technique requires a focus on their specifi c demands and possibilities. This paper shows the whole design, optimization and production process includingpreliminary studies, preliminary design, form-fi nding and assembly based on a case study. All needed data for optimization in external software and for digital production is derived from a central parametric model programmed in Grasshopper. The result in a collaborative process between theory/practice, human/machine, software/hardware and analogue/digital is the Sparklerpavilion.
keywords	Parametric Modelling; Digital Fabrication; Computational Design and Construction; CAAD curriculum
series	eCAADe
email
last changed	2022/06/07 07:49

For more results click below: