Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2012_069
id	ecaade2012_069
authors	Pitts, Gregg ; Luther, Mark
year	2012
title	A Parametric Approach to 3D Massing and Density Modelling
doi	https://doi.org/10.52842/conf.ecaade.2012.1.157
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.157-165
summary	This paper addresses the current void between social agendas, environmental criteria and design methodology in urban planning through the implementation of new computational systems. It considers the application of digital design tools such as GIS and parametric systems towards more effi cient and effective design solutions. The digital design methods have been developed and tested within Grimshaw Architects Design Technology Group on both Australian and international urban development projects. A methodology for the use of parametric design for urban design development is suggested for defi ning, simplifying and categorising planning and design strategies. The following tools are a means of generating urban design concepts as digital forms in order to better inform the designer during the design process.
wos	WOS:000330322400015
keywords	Parametric; Urbanism; Sustainability
series	eCAADe
last changed	2022/06/07 08:00

_id	ecaade2012_250
id	ecaade2012_250
authors	Baerlecken, Daniel ; Swarts, Matthew ; Gentry, Russell ; Wonoto, Nixon
year	2012
title	Bio-Origami: Form Finding and Evaluation of Origami Structures
doi	https://doi.org/10.52842/conf.ecaade.2012.1.497
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 497-504
summary	This paper presents a concept of origami as a form-generator for a structural system that allows deployability for structures with large spans. The presented approach studies the embedded kinetic possibilities of folded structures and focuses on a parametric modelling process that allows evaluating the structural performance of different types of the same origami family in order to optimize the geometry for a given scenario. The workfl ow between scripting based form generation – within Rhinoceros and Excel – and LS-DYNA is presented in detail. In addition to that the question of scalability from a thin microstructure to a thickened roof structure is discussed in the context of an architectural project.
wos	WOS:000330322400051
keywords	Parametric modelling; form fi nding; origami; LS-DYNA; scripting
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_057
id	ecaade2012_057
authors	Bielik, Martin ; Schneider, Sven ; König, Reinhard
year	2012
title	Parametric Urban Patterns: Exploring and integrating graph-based spatial properties in parametric urban modelling
doi	https://doi.org/10.52842/conf.ecaade.2012.1.701
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 701-708.
summary	The article presents a graph-based spatial analysis toolset (“decoding spaces”components) which we have recently developed as an extension of the visual scripting language Grasshopper3D for Rhino. These tools directly integrate spatial analysis methods into CAD design software which can have a signifi cant effect on current design workfl ows. However,grasshopper doesn’t only enable the results of analyses to be used in the standard Rhino modelling environment. It also makes it possible to integrate spatial analysis into a parametric design approach as discussed in this paper. The functionality of this toolset is demonstrated using a simple urban design scenario where we introduce the idea of parametric patterns based on graph-measures.
wos	WOS:000330322400074
keywords	Spatial analysis; parametric modelling; urban layout; design process; decoding spaces
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2012_257
id	ecaade2012_257
authors	Fischer, Jan-Ruben
year	2012
title	Optimizing Digital Organic Freeform Modelling for Fabrication by Using Parameterization With Glass Fibre Reinforced Plastics (GRP): A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2012.2.191
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 191-200
summary	In the fabrication of organic free-form shapes in architecture one is constantly faced with specifi c planning and design challenges. This paper examines these problems as well as possible solutions for the design of a completed and built prototype using the example of an organically shaped pavilion made of glass fi bre reinforced plastic modules. The paper describes which adjustments to the original design were required to take the step from “digital physicality” to “physical digitality” to realize a constructive and economically successful implementation. The solutions discussed combine modern digital software methods such as parametric design with innovative 3D modelling principles.
wos	WOS:000330320600019
keywords	Digital fabrication; freeform modelling; parametric design; bionic, GRP
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2012_117
id	caadria2012_117
authors	Karakiewicz, Justyna and Thomas Kvan
year	2012
title	Diagramming in a digital environment
doi	https://doi.org/10.52842/conf.caadria.2012.151
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 151–160
summary	Research into digital design environments has explored modelling, generating and testing design propositions. When considering the broader design literature, however, we notice that a significant contribution to design is absent, that of diagramming. In the realm of architectural theory discourse in the past few years, diagramming has been much discussed with many interpretations of the activity. This paper will demonstrate that the development of digital techniques can change dramatically our ability to conceptualise and produce generative diagrams as previously not possible. The paper will follow the work done at the in the Melbourne School of Design. We will demonstrate how students are introduced to diagramming techniques and shown how to formulate a concept, then a program generator and to test a final proposal. The paper will also demonstrate how digital techniques can dramatically change the way we conceptualise and approach design problems. In this repeated teaching technique, we illustrate how digital systems contribute to conceptual diagrams and this contributes to the larger theoretical debate on diagramming techniques by introducing digital perspectives. The paper will therefore contribute to discussion on the ways in which digital systems can be engaged in substantive architectural teaching beyond the rote application of proprietary software and representative approaches.
keywords	Diagramming; parametric; design; urbanism; abstraction
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2013_000
id	caadria2013_000
authors	Stouffs, Rudi; Patrick Janssen, Stanislav Roudavski and Bige Tunçer (eds.)
year	2013
title	Open Systems
doi	https://doi.org/10.52842/conf.caadria.2013
source	Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2012, 977 p.
summary	Contemporary challenges require inclusively integrated approaches to designing. Constrained by established modes of practice, such integration is impossible without a radical commitment to openness. In response to this need, the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) brought together contributions that engage with open systems in all aspects of architectural and urban design: open with respect to the scale of the design objectives and the context, from a building component within a building system to a neighbourhood or city within its urban and rural context; open with respect to the domains being considered, from planning to sustainable performance of a building or city; open with respect to the collaboration of disciplines and participants, from ad-hoc brainstorming to a rigorous process of consultation and feedback; open with respect to design methods and techniques, from physical modelling to digital prototyping; open with respect to design models and representations being adopted, from a parametric exploration to an ontological delineation considering Building Information Modelling, Built Environment Modelling or City Information Modelling; open with respect to the tools and applications being adopted, despite interoperability issues, from modelling to simulation and assessment; open with respect to the learning approach being adopted, from informal interaction and sharing to formal design education; open with respect to the open source approach being adopted in research and development, in order to gather community involvement and use. The conference was held 15-18 May 2013 at the Department of Architecture, School of Design and Environment, at National University of Singapore.By focusing on the theme of Open Systems, CAADRIA 2013 aimed to explore all these aspects and more, and raise awareness to the need of breaching disciplinary boundaries and reaching creative communities at all levels of expertise, by pooling resources, knowledge and practices, and integrating them through the adoption of open systems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2012_272
id	sigradi2012_272
authors	Amindarbari, Reza
year	2012
title	Morphological indicators of solar exposure
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 414-418
summary	This paper investigates the relation between the shading condition and geometrical configuration of neighborhood-scale developments. It introduces a straightforward method for measuring shadow areas casted on buildings’ roofs and facades – in urban areas – using digital 3D models. Employing this method for measuring shadow areas in nine neighborhoods in Jinan, China, at six different time points on summer and winter solstices – a total of 54 sample measurements – this study develops two regression models that reveal the significant dependency of the in-shadow percentage of buildings’ façade and roof areas to the building volume density (BVD) and height irregularity (HI) of the urban fabric.
keywords	urban form, geometrical configuration, solar exposure, shadow area
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_066
id	ecaade2012_066
authors	Aschwanden, Gideon ; Zhong, Chen ; Papadopoulou, Maria ; Vernay, Didier Gabriel ; Arisona, Stefan Müller ; Schmitt, Gerhard
year	2012
title	System Design Proposal for an Urban Information Platform: A systems proposal
doi	https://doi.org/10.52842/conf.ecaade.2012.1.665
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 665-673.
summary	This paper focuses on information modelling and proposes a system design for an urban model encompassing multi-scale data. The system employs procedural modelling on top of GIS information to allow different simulation tools to interact with the data. This is a promising approach for an urban information platform integrating multi-scale urban information to support different simulations important in urban design. In an initial instance the information platform is used to scale-up and scale-down in information modelling, linking technologies on different spatial levels, and utilizing the advantages of different tools to evaluate the built environment. The platform is applied in Singapore to manage urban data and support urban formation.
wos	WOS:000330322400070
keywords	Urban information model; Scale; Urban Simulation; Urban Design; CFD; Multi Agent System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
doi	https://doi.org/10.52842/conf.caadria.2012.305
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2012_133
id	caadria2012_133
authors	Baerlecken, Daniel and Gernot Riether
year	2012
title	Aggregates: Digital design for design
doi	https://doi.org/10.52842/conf.caadria.2012.607
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 607–616
summary	This paper discusses an educational design methodology for undergraduate studio instruction, which uses a systematic and research based design approach. Based on Lars Spuybroek’s methodology that was originally developed as a one-year graduate and postgraduate studio, a new method for undergraduate teaching has been developed. The paper will discuss Spuybroek’s methodology, as developed for the graduate and postgraduate program, and explain its adaption for undergraduate studio instruction. Spuybroek’s approach is based on a model that starts with research in systems in general that is them tuned to a certain set of architectural questions and developed into parametric buildings in a stepwise procedure by delaying the specifics of site and program.
keywords	Methodology of CAAD; education in CAAD; generative design; parametric modeling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_163
id	ecaade2012_163
authors	Barbosa, Wilson; Araújo, André; Carvalho, Guilherme; Celani, Gabriela
year	2012
title	Samba Reception Desk: Compromising Aesthetics, Fabrication and Structural Performance in the Design Process
doi	https://doi.org/10.52842/conf.ecaade.2012.2.255
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 255-263
summary	The present paper describes an integrative design experiment in which different types of models were used in order to achieve a design that compromises aesthetics, lightness, fabrication, assembly and structural performance. It shows how an integrative approach, through the use of both virtual and physical models, can provide valuable feedback in different phases of the design and fabrication process. It was possible to conclude that the design method used allowed solving many problems and had a significant impact in the resulting object.
wos	WOS:000330320600025
keywords	Design process; structural analysis; parametric design; digital fabrication; integrative design; models in design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2012_130
id	ecaade2012_130
authors	Beirão, José ; Arrobas, Pedro ; Duarte, José
year	2012
title	Parametric Urban Design: Joining morphology and urban indicators in a single interactive model
doi	https://doi.org/10.52842/conf.ecaade.2012.1.167
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.167-175
summary	A parametric urban design system integrating GIS data in a CAD environment is proposed as a platform for discussing urban plans providing flexibility and information access in an interactive fashion. The proposed system links calculations of urban indicators with the parameter manipulation of the layout geometry, therefore allowing for a systematic update of indicators according to design modifi cations. Hence, design may be fine-tuned in an informed manner enhancing the quality of design decisions.
wos	WOS:000330322400016
keywords	Parametric urban design; density studies; design methods
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_078
id	caadria2012_078
authors	Beorkrem, Christopher
year	2012
title	Running Interference: Complex Systems Intervention as Design Process
doi	https://doi.org/10.52842/conf.caadria.2012.183
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 183–192
summary	This paper presents a case study problem statement tested in the design studio with the intent of teaching methods for engaging systematic thinking as a process for deriving solutions to parametric design problems. The intent is to address the simulation environment developed through complex systems and interject a curve ball, or unexpected constraint delimiting the solution as part of the design process. This method was tested through the submittal of the projects to international design competitions. The students were asked to manipulate the competition criteria by appealing not only to the design criteria but also to the juries desire (whether conscious or unconscious) for novel sustainable processes of material usage and program. This material ecology is developed as a method for linking parametric modelling, not as a process for the application of a construction technique, but as a way to pre-rationalise material constraints and discover how program and form can operate within those constraints. In the first year of the studio two of six teams were selected as finalists and in the second year of the studio five of seven of the teams were selected as finalists.
keywords	Studio pedagogy; computational instruction; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_317
id	ecaade2012_317
authors	Boeykens, Stefan ; Himpe, Caroline ; Martens, Bob
year	2012
title	A Case Study of Using BIM in Historical Reconstruction: The Vinohrady synagogue in Prague
doi	https://doi.org/10.52842/conf.ecaade.2012.1.729
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 729-737.
summary	This article refl ects on the digital reconstruction of the Vinohrady Synagogue in Prague, which was demolished in 1951. Based on an international collaboration through the Erasmus program, expertise derived from other Viennese synagogue reconstructions at TU Vienna was combined with a resource organization methodology developed at KU Leuven. The reconstruction process is carried out using BIM software, which poses some particular attention on the software methodology and model structure, but at the same time illustrates the added value of a BIM approach, when comparing with more traditional CAD modelling systematics. Of particular interest is the approach for modelling complex geometry, integrating with more traditional 2D documents and for visualizing reconstruction assumptions within the 3D model representation.
wos	WOS:000330322400077
keywords	Virtual reconstruction; destroyed synagogue; 3D-modeling; BIM; urban context
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2012_143
id	ecaade2012_143
authors	Both, Petra von
year	2012
title	Potentials and Barriers for Implementing BIM in the German AEC Market: Results of a Current Market Analysis
doi	https://doi.org/10.52842/conf.ecaade.2012.2.151
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 151-158
summary	The research project „BIM – Potentials and Barriers“ aims to analyse the existing practice concerning BIM and the barriers for the implementation of this approach in Germany. Accompanied by an ‚advisory board’ with nameable representatives from practice, the public authorities and AEC associations, a set of hypotheses has been elaborated that could be evaluated by a detailed survey. Based on the detection of relevant stakeholders, the survey fi rst tries to disclose the real situation of how BIM is currently used in practice. Furthermore the potentials of the application of BIM in the different processes and target groups are determined as well as the barriers and constraints. Thereby the enhancement of the considered thematic areas is an important solution approach of the project: besides technological aspects, the analysis is also focusing on contracting, norms and processes as well as education, knowledge and role perception.
wos	WOS:000330320600015
keywords	BIM; survey; collaborative engineering; virtual engineering; product modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_284
id	sigradi2012_284
authors	Brakke, Aaron Paul; Velasco, Rodrigo
year	2012
title	Eco-envelopes: An Environmental Approach to Parametric Design
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 517-521
summary	The development of the digital discourse in the field of architecture has been a principle concern at the beginning of the 21st century. Attempts at developing methodologies for the utilization of digital tools in the design process have been present for decades. In the past decade that interest has been augmented by a stance that aims to emphasize the use of generative tools that can facilitate an iterative systems approach to design. This article illustrates how a parametric modeling process has been applied in the design and dimensioning of brise soleil double facade systems.
keywords	Digital Discourse; Parametric Modeling; Design Process; Environmental; Brise Soleil
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_100
id	ecaade2012_100
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2012
title	Real-Time Robot Simulation and Control for Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2012.2.479
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 479-486
summary	Industrial robots for architectural fabrication have not yet been directly linked to the design process, as current research focuses mostly on the automated generation of robot control data for mass customization. In this paper, we will discuss the use of a real-time programming environment for robot simulation/control and introduce a virtual robot, that allows architects to digitally prototype fabrication processes. While such a real-time approach is also suitable for mass customization, the main advantage is that this interaction with the virtual-robot can be used to intuitively solve complex fabrication problems.
wos	WOS:000330320600050
keywords	Industrial Robots; Inverse Kinematics; Virtual Robot; Mass Customization; Simulation; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_270
id	sigradi2012_270
authors	Brod, Gustavo Alcantara; Pires, Janice; Borda, Adriane
year	2012
title	Um ensaio para inserção do conceito de processos generativos digitais em estágios iniciais da formação em arquitetura [An experiment for introducing the concept of generative processes in early stages of architectural education]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 611-614
summary	The use of digital media for representation is already strongly established among architects and students of architecture, however, despite the rapid technological developments and growing research, the use of advanced digital technology to generate and manipulate complex forms is still far less present in the learning and teaching of architectural design. This study presents a didactical approach for introducing generative design as a method for form exploration through parametric geometric representation. The activity presented in this paper was exercised with second and fifth semester students, working with form generation and variation using Grasshopper as a parametric design tool.
keywords	digital generative processes; parametric design, Grasshopper; geometric design, design didactics.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_058
id	ecaade2012_058
authors	Bus, Peter
year	2012
title	Emergence as a Design Strategy in Urban Development: Using Agent-Oriented Modelling in Simulation of Reconfiguration of the Urban Structure
doi	https://doi.org/10.52842/conf.ecaade.2012.1.599
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 599-605
summary	Agent-oriented modelling is one of the simulation methods for emergent behavior of a complex system that could be considered for application of urban city structures. Using advanced script techniques, the behavior and evolution of structures in the bottom-up strategies for the development of environment could be simulated in architecture and urbanism as well. The paper presents a research subproject in the area of verifi cation of the processes of spatial and social interaction of the agents according to the logic of defined intrinsic rules of Swarm behavior in the simulation model of the selected area. The research builds mainly upon two selected requirements of the bottom-up strategy: the approach distances to places of interest and mutual standoff distances between urban elements.
wos	WOS:000330322400062
keywords	Emergence; simulation; self-organization process; agent-oriented modelling
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: