Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 545

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_479
id	acadia12_479
authors	Castorina, Giulio
year	2012
title	Performative Topologies: An Evolutionary Shape Optimization Framework for Daylighting Performance Coupling a Particle-Spring System With an Energy Simulation Tool
doi	https://doi.org/10.52842/conf.acadia.2012.479
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 479-490
summary	This paper develops a methodological approach for use in design practice which combines an external simulation tool (EnergyPlus™) with an evo-lutionary optimisation strategy for the form-finding of complex fenestra-tion systems. On one hand, based on previous research, it presents a novel approach for the shape morphogenesis that exploits a generative algorithm technique to control a limited set of parameters whilst on the other hand it facilitates the integration of a simulation tool capable of handling increasing levels of complexity with greater data interoperabil-ity. In doing so it will argue the heuristic potential of the proposed meth-od in aiding the designers’ decision making whilst increasing the formal possibilities of their final design solutions.
keywords	Performance-based design , Genetic Algorithm (GA) , daylighting simulation , shape optimisation , decision support system (DSS)
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2013_136
id	ecaade2013_136
authors	Vasku, Michael
year	2013
title	Generative Improvement of Street Networks Based on Space Syntax
doi	https://doi.org/10.52842/conf.ecaade.2013.1.367
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 367-374
summary	Space syntax is supposed to be an objective method for evaluating spatial configurations. Its contribution to a design process is dependent on the designer’s estimation. The paper describes a generative approach to finding particularly good interventions based on space syntax analyses of axial maps. More precisely, a case study was undertaken through applying such a strategy to improve and connect a segregated street network of an informal settlement to its neighbourhood. Controlling and redirecting movement in slums may cause positive effects. This research is based on and inspired by a consulting project by the company Space Syntax Limited for the Municipality of Jeddah, Saudi Arabia, in which the consulting company designed a regeneration program for declining informal settlements. (Karimi and Parham, 2012)
wos	WOS:000340635300038
keywords	Space syntax; slum upgrading; design computing; urban design.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_284
id	ecaade2012_284
authors	Ameijde, Jeroen van; Carlin, Brendon
year	2012
title	Digital Construction: Automated Design and Construction Experiments Using Customised On-Site Digital Devices
doi	https://doi.org/10.52842/conf.ecaade.2012.2.439
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 439-446
summary	This paper presents a currently on-going research trajectory, investigating integrated design and build work-fl ows using generative design strategies and custom built fabrication devices. The aim of the research, which is being developed through a series of experiments and workshops, is to explore scenarios in which these work-flows can produce emergent architectural structures which are highly adapted towards the intended performance within their specifi c context and site. The research has produced a number of installations and prototypical structures which test the practical and theoretical dimensions of the methodology explored. This paper will introduce intriguing new scenarios in which the architects’ role is focused on an indirect, advanced level of control of the process of design, allowing for a more open-ended method of negotiation between structure, users and environment.
wos	WOS:000330320600046
keywords	Generative design; digital fabrication; customised CNC devices; digital on-site construction
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_133
id	caadria2012_133
authors	Baerlecken, Daniel and Gernot Riether
year	2012
title	Aggregates: Digital design for design
doi	https://doi.org/10.52842/conf.caadria.2012.607
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 607–616
summary	This paper discusses an educational design methodology for undergraduate studio instruction, which uses a systematic and research based design approach. Based on Lars Spuybroek’s methodology that was originally developed as a one-year graduate and postgraduate studio, a new method for undergraduate teaching has been developed. The paper will discuss Spuybroek’s methodology, as developed for the graduate and postgraduate program, and explain its adaption for undergraduate studio instruction. Spuybroek’s approach is based on a model that starts with research in systems in general that is them tuned to a certain set of architectural questions and developed into parametric buildings in a stepwise procedure by delaying the specifics of site and program.
keywords	Methodology of CAAD; education in CAAD; generative design; parametric modeling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
doi	https://doi.org/10.52842/conf.acadia.2012.199
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_5
id	ecaade2012_5
authors	Biloria, Nimish; Chang, Jia-Rey
year	2012
title	HyperCell: A Bio-Inspired Information Design Framework for Real-Time Adaptive Spatial Components
doi	https://doi.org/10.52842/conf.ecaade.2012.2.573
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 573-581
summary	Contemporary explorations within the evolutionary computational domain have been heavily instrumental in exploring biological processes of adaptation, growth and mutation. On the other hand a plethora of designers owing to the increasing sophistication in computer aided design software are equally enthused by the formal aspects of biological organisms and are thus meticulously involved in form driven design developments. This focus on top-down appearance and surface condition based design development under the banner of organic architecture in essence contributes to the growing misuse of bio-inspired design and the inherent meaning associated with the terminology. HyperCell, a bio-inspired information design framework for real-time adaptive spatial components, is an ongoing research, at Hyperbody, TU Delft, which focuses on extrapolating bottom-up generative design and real-time interaction based adaptive spatial re-use logics by understanding processes of adaptation, multi-performance and self sustenance in natural systems. Evolutionary developmental biology is considered as a theoretical basis for this research.
wos	WOS:000330320600061
keywords	Adaptation; Swarms; Evo-Devo; Simulation: Cellular component
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac201210403
id	ijac201210403
authors	Gerber, David J.
year	2012
title	PARA-Typing Informing Form and the Making of Difference
source	International Journal of Architectural Computing vol. 10 - no. 4, 501-520
summary	This paper presents design research and instruction into the use of constraint based digital and analogue modelling techniques and the development of associative parametric models to simulate highly differentiated fabricated form. One set of these design research projects were conceived as manual analogue generative processes for prototyping modularity and serial differentiation.Then through parametric design techniques, modular aggregations were design explored and developed in concert with material properties and constraints. Utilizing digital fabrication full-scale installations were designed, manufactured, and for site-specific configurations. A second set of projects provides an extension of the design instruction that includes the integration of performance criteria into these design objectives.The objectives of the research are to present benefits and limitations of the incorporation of parametric design, performance analysis, and prototyping techniques in comprehensive studio instruction.The paper discusses the resultant informed materialized difference and the impacts on achieving reinforced and hands on learning objectives.
keywords	Generative design; parametric modelling; prototyping; digital fabrication; design pedagogy; performative design
series	journal
last changed	2019/05/24 09:55

_id	acadia12_67
id	acadia12_67
authors	Gerber, Dr. David Jason ; Lin, Shih-Hsin
year	2012
title	Synthesizing Design Performance: An Evolutionary Approach to Multidisciplinary Design Search
doi	https://doi.org/10.52842/conf.acadia.2012.067
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 67-75
summary	Design is a goal oriented decision-making activity. Design is ill defined and requiring of synthetic approaches to weighing and understanding tradeoffs amongst soft and hard objectives, and the imprecise and or computationally explicit criteria and goals. In this regard designers in contemporary practice face a crisis of sorts. How do we achieve performance under large degrees of uncertainty and limited design cycle time? How do we better design for integrating performance? Fundamentally design teams, are not typically given enough time nor the best tools to design explore, to generate design alternatives, and then evolve solution quality to search for best fit through expansive design solution spaces. Given the complex criteria for defining performance in architecture our research approach experiments upon an evolutionary and integrative computational strategy to expand the solution space of a design problem as well as pre-sort and qualify candidate designs. We present technology and methodology that supports rapid development of design problem solution spaces in which three design domains objectives have multi-directional impact on each other. The research describes the use of an evolutionary approach in which a genetic algorithm is used as a means to automate the design alternative population as well as to facilitate multidisciplinary design domain optimization. The paper provides a technical description of the prototype design, one that integrates associative parametric modeling with an energy use intensity evaluation and with a financial pro forma. The initial results of the research are presented and analyzed including impacts on design process; the impacts on design uncertainty and design cycle latency; and the affordances for ‘designing-in’ performance and managing project complexity. A summary discussion is developed which describes a future cloud implementation and the future extensions into other domains, scales, tectonic and system detail.
keywords	Parametric Design , Domain Integration , Design Methods , Multidisciplinary Design Optimization (MDO) , Evolutionary Algorithms , Design Decision Support , Generative Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	sigradi2012_247
id	sigradi2012_247
authors	Gomes, Lucas Ariel; Barbosa, Wilson; Araújo, André Luís; Celani, Gabriela
year	2012
title	Exercício Projetual de uma Estrutura de Cobertura com a Utilização do Diagrama de Voronoi no plug-in Grasshopper [Design experiment with the use of Voronoi Diagrams in Grasshopper plug-in: a roof structure]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 636-640
summary	This paper describes a design experiment with the use of Voronoi Diagrams, a systematic division of the metric space based on a set of points. Automated procedures were used in the process: a script that generated sets of random points and a plug in that automatically generated polygons based on these points. Computer models, scale models and full scale prototypes were produced in order to develop construction details and preview results. It was possible to conclude that the use of a generative method along with automated procedures is far from restricting creativity, allowing the quick exploration of multiple design alternatives.
keywords	Roof structure; Voronoi Diagram; Grasshopper
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2012_041
id	caadria2012_041
authors	Lin, Yifeng and Shanshan Shen
year	2012
title	Designing a performance-oriented house envelope based on a parametric approach: An integrated method
doi	https://doi.org/10.52842/conf.caadria.2012.507
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 507–516
summary	Conventional house envelope design methods often generate few alternatives related to meeting living comfort and building environmental requirements. However, these design methods are increasingly facing difficulties in following the dynamic climate change and advanced building performance conditions in the early stage of the design process. This paper attempts to introduce an integrated method for designing a performance-orientated house envelope in New Zealand which adopts the parametric approach. This approach can guide and assist designers to make a well-informed decision, which can satisfy both aesthetics and energy performance, and gain more efficiency for the design process in the early stage of housing performance simulation.
keywords	Performance-oriented house envelope design; integrated parametric design; dynamic approach
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2020_174
id	sigradi2020_174
authors	Marques, Aline Calazans; Felicio, José Augusto Recker
year	2020
title	Dialogue between Building Shape and Thermal Performance
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 174-179
summary	This paper deals with the research of the building shape in a constant and dialectical relationship with thermal performance. The purpose of this research is to understand and explore the dialogue between shape and performance with generative strategies. The method was based on the works by Oxman (2010), Olgyay (2015), and Di Mari & Yoo (2012), by means that relate the form to performance issues. The thermal performance data found to result from the relationship between thermal conditions, the shape of the envelope, and the characteristics of the eight Brazilian bioclimatic zones.
keywords	Building shape, Thermal performance, Generative system, Teaching observation
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	sigradi2023_108
id	sigradi2023_108
authors	Passos, Aderson, Jorge, Luna, Cavalcante, Ana, Sampaio, Hugo, Moreira, Eugenio and Cardoso, Daniel
year	2023
title	Urban Morphology and Solar Incidence in Public Spaces - an Exploratory Correlation Analysis Through a CIM System
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1655–1666
summary	The walkability of open spaces has been highlighted in current discussions about the production of designed environments in urban contexts (Matan, 2011). To contribute to this theme, this work selects the environmental comfort of open spaces as its element of study. The production of urban space was investigated, specifically in regard to urban morphology, understanding that city design directly influences environmental comfort (Jacobs, 1996). This work addresses the geographic context of low latitudes, specifically in hot and humid climate zones of Brazil, and, in this context, according to NBR 15220 (national performance standards), shading is one of the main comfort strategies, so solar incidence was the approached environmental phenomenon. Thus, this work presents a digital system that performs exploratory analysis on the correlations between urban form indicators and environmental performance indicators, specifically solar incidence. The method consists of three steps: urban form modeling (1), indicator measurement (2) and correlation analysis (3). In the first stage, different spatial sections of a city in Brazil were represented in the digital environment (1). This work’s implementation instrument is based on a City Information Modeling framework (Beirao et al., 2012). Visual Programming Interface (VPI) and Geographic Information Systems (GIS) tools were used, in addition to a Relational Database Management System (RDBMS). Then, for each urban clipping, the values of morphological indicators and the incidence of solar radiation were measured (2). Based on the values of the indicators, an exploration of their correlation was carried out by statistical methods (3). The results of the correlation analysis and their correspondent scatter plots are presented. Finally, possible applications of the results for the creation of prescriptive urban planning systems are discussed, seeking to promote a sustainable urban environment.
keywords	Urban planning, Environmental comfort, Walkability, Urban morphology, Statistical methods.
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	ecaade2012_015
id	ecaade2012_015
authors	Schneider, Sven ; König, Reinhard
year	2012
title	Exploring the Generative Potential of Isovist Fields: The Evolutionary Generation of Urban Layouts based on Isovist Field Properties
doi	https://doi.org/10.52842/conf.ecaade.2012.1.355
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 355-363
summary	Isovists and isovist fi elds can be used to numerically capture the visual properties of spatial confi gurations (e.g. fl oor plans or urban layouts). To a certain degree these properties allow one to make statements about how spaces affect people. The question that serves as the starting point of this study is to examine whether spatial confi gurations ca n generated on the basis of these properties. This question is explored using an experimental approach for the computer-based generation of two-dimensional urban layouts. The spatial arrangements of two-dimensional elements (building-footprints) within a given boundary is optimised in terms of the desired isovist fi eld properties by means of an evolutionary strategy. The paper presents the results of this optimisation and discusses the advantages of this method compared with pattern books as commonly used in architecture.
wos	WOS:000330322400036
keywords	Spatial Configuration; Generative Design; Evolutionary Strategy; Isovists; Visibility Based Design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
wos	WOS:000330320600024
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia12_231
id	acadia12_231
authors	Bell, Brad
year	2012
title	Parametric Precast Concrete Panel System
doi	https://doi.org/10.52842/conf.acadia.2012.231
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 231-238
summary	The working hypothesis of this research focuses on the potential of utilizing a digital toolset to engage information within a surrounding context for the purpose of creating a more intelligent pre-cast concrete panel system. The Parametric Pre-Cast Concrete Panel System is a research project attempting to parametrically define geometry for the purpose of producing formwork based on quantitative information related to issues such as environmental control systems, sound abatement, as well as qualitative information like non-standard variation paneling, and aesthetic composition.
keywords	Energy , form , structures , performance , simulation , prototyping , precast , concrete
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:54

_id	caadria2012_081
id	caadria2012_081
authors	Beorkrem, Christopher; Niki DesImini, Mitch McGregor and Igor Polakov
year	2012
title	Sphere mapping: A method for a responsive surface design
doi	https://doi.org/10.52842/conf.caadria.2012.527
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 527–536
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a pre-defined surface. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe has developed a series of studies in material and surface properties. By utilising a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe’s original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
keywords	Geometric systems; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2012_019
id	ascaad2012_019
authors	Blibli, Mustapha; Ammar Bouchair and Faouzi Hannouf
year	2012
title	Three Dimensional Reconstitution of an Old Town from Historical Documents: Case of the Medina of Jijel in Algeria
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 191; 285-303
summary	The three-dimensional reconstitution of cities and urban tissues was the subject of several studies and researches. In order to obtain the acquisition of the geometry of architectural or urban sets, some studies are based on Photogrammetric or on computer vision. Others have focused on the development of tools of acquisition from a laser providing a 3D scatter plot. Some of them yet focused towards the development of CAD software. The automatic generation for morphological 3D representation based on the exploitation of the architectural knowledge basis is also an option. This type of work becomes more relevant and legitimate when it concerns old cities in state of ruin or more simply missing whose remains only prints or literary descriptions similar to our case study; the old town of Jijel that many people ignore its existence. The aim of this work is to achieve a 3D reconstitution of buildings of this town based on historical documents, mostly prints, digitized old maps and plans, as well as literary texts (tales of travelers, military records, and history books). The method developed can solve and generate possible urban volumes in the most frequent cases. The 3D model obtained, despite its geometric simplicity, can view the city from different angles and open new opportunities for research in history, architecture and town planning.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_019.pdf
last changed	2012/05/15 20:46

For more results click below: